I've spent days searching and trying all sorts of tweaks but I can't get anything to work. Can anyone PLEASE help!
I use Tomtom 7 and I've always sent the voice instructions to the bluetooth speaker in my bike helmet (just a handsfree paired item). I've previously done this on HTC devices with BTAudio and a one line registry tweak. Can anyone offer a solution to send all the audio to a bluetooth handsfree on the HD2?
I really hope someone can help, I've got the HD2 setup just right except for this last remaining item.
Many thanks,
i have the same problem...
@noony i think u have already enabled in bt setting the option "manage system audio in handsfree device" if u didnt...try that
for me doesnt work maybe its a headphone problem i see a sort of "fhhh" when any sound is played on phone but still come out from the speeker
another issue... every time i start a call with bt the volume is at the lower level..internal and headphone too! and the last is very strange because with my artemis didnt do
xardus said:
i have the same problem...
@noony i think u have already enabled in bt setting the option "manage system audio in handsfree device" if u didnt...try that
for me doesnt work maybe its a headphone problem i see a sort of "fhhh" when any sound is played on phone but still come out from the speeker
another issue... every time i start a call with bt the volume is at the lower level..internal and headphone too! and the last is very strange because with my artemis didnt do
Click to expand...
Click to collapse
Yes I've tried the "manage system audio in handsfree device" option. I can get some background noise on the headsets (I'm trying with a Scala Rider and Motorola 700 & 850) but I never manage to get any sound.
Can anyone please offer a solution? It's a big disappointment for me if this isn't possible. Any suggestions welcome, many thanks.
My Observations
I pared it with my BMW and for the life of me cant ger any audio (music) over bluetooth ( the phone works fine) I then tried it on a $20 bluetooth earpiece I ocassionally use for the phone and guess what I can play music over it fine.
I tried and tried again in the car but could not get it to work.
I think some bluetooth devices will not work. Is there a different specifiaation for bluetooth ir BT1 and BT2 ??
I havent checked into this yet.....
Fadetogrey said:
I pared it with my BMW and for the life of me cant ger any audio (music) over bluetooth ( the phone works fine) I then tried it on a $20 bluetooth earpiece I ocassionally use for the phone and guess what I can play music over it fine.
I tried and tried again in the car but could not get it to work.
I think some bluetooth devices will not work. Is there a different specifiaation for bluetooth ir BT1 and BT2 ??
I havent checked into this yet.....
Click to expand...
Click to collapse
It gives me some hope that you've got it to work with one bluetooth device. Can you please let me know exactly what you did to get the $20 bluetooth earpiece to work?
Thanks,
yeah that was my idea but without a stereo bt device i cant try to myself...i ordered to vodafone one with some of my tons of points...3 weeks and no answer!
I had the same issue and on my old phone, the HTC Touch HD, I used the following program to my satisfaction:
BTAudio
On my HTC HD2 however this doesn't seem to work anymore. :-(
it does the same thing of the inbuild bt option on hd2 its just a "quick link" to place on the bar
anyone of u have any problem with bt device volume? before i have an Artemis and 3 different device i used the device volume was every time the one i choose...now every time a new call starts phone volume its right but device volume jump to minimum level and every time i have to press + button like as i'm playing videopoker to dont miss fist seconds of a conversation
Works fine with Jabra 3030, all audio over it, music, system sounds and calls.
Maybe it's only working for bluetooth devices that are setup as stereo. Can anyone please offer a solution here?
I've installed a 6.5 rom (dutty v7 - thank you) on my HD and after a sprite restore (level 2) bluetooth audio divert works fine. Although I notived that the bluetooth options remained the old settings (possibly due to my backup restore) and the divert was done using the BTAudio. Sorry to keep asking but if anyone can shed light on this.
Is it possible to tweak the HD2 so that audio can be sent to any bluetooth headset/handsfree or is there some hardware limitation that stops this from being done?
I've tried every app and tweak that I can think of! Please can anyone help, even iof it's to let me know why this can't be done.
Thanks,
its what we all are trying to do......now i think its only a bt device problem...if it support bt2.1 and a2dp with edr seems to work all good....
i solved in car with headphone in the box...but bluetooth should be much and much better without any cable that always have to remove nodes (its the right word? sorry if not hehe)
I'm connecting to my HD2 using Jabra Stone, an A2DP headset. When I selected the stereo headset profile on the HD2, it redirected all system sounds to the headset: reminders, SMS alert, soundtrack for videos, audio player....except phone ring. I used BT Audio over a non-A2DP headset before with Diamond2, but the ausio is very poor, and the connection drops very often. Since I changed to A2DP headsets, the Diamond2 and HD2 supports it out of the box - no hack needed.
So look for A2DP headsets if you want to redirect audio.
Thank you to everyone that has helped with replies. I've now got my answer. If the bluetooth device supports A2DP then it works! (just won't work with mono etc)
I've now tested my HD2 with over a dozen bluetooth devices ALL A2DP enabled headsets regardless of if they are cheap or expensive!
Thanks again for everyone taking the time to help.
I have an LG HBM-220 bluetooth and cannot put audio to in, only phone calls!
How can i manage to do it?
I blame it on the stupid Widcomm Bluetooth stack... If the HD2 used the better MS stack, BT would play nice with with more of our periphirals and apps
I can't use MSVC properly with BT either....
the solution is to go to the bluetooth settings, select your device and connect the stereo audio connection.
Way back, Microsoft decreed that ONLY the phone app could use a mono BlueTooth headset, although any audio could be redirected to a stereo A2DP headset.
In order to get around this you need to fudge the sytem with something like BTAudio or TekSoft's BlueAudio.
The latter worked on my XDA Orbits (1 and 2) but does not work on my Touch HD with Dutty's R6 ROM (WM 6.5) possibly because BlueAudio requires the Microsoft BlueTooth stack and I suspect Dutty's ROM has the Widcomm stack. But I could be wrong about that.
BTAudio sort of works on my Touch HD, but outgoing audio is speeded up like I've been breathing Helium.
So no current solution to yet another idiotic gotcha from Microsoft.
Noony said:
Thank you to everyone that has helped with replies. I've now got my answer. If the bluetooth device supports A2DP then it works! (just won't work with mono etc)
I've now tested my HD2 with over a dozen bluetooth devices ALL A2DP enabled headsets regardless of if they are cheap or expensive!
Thanks again for everyone taking the time to help.
Click to expand...
Click to collapse
Hmmm. When I conect via gprs to youtube aps I can hear the voice in my mono headset (jabra 2020) but via wifi and computer as modem voice is only in phone speaker. So maybe we should look gprs or youtube aps reg tweek.
Guys
i have a nokia HB-100 headset and i'm experiencing all kinds of strange behavours
sometimes system sounds including music ...etc get directed to the headset and some other time it just directs calls no matter how hard i try thru soft resets or unchecking then checking the "play system sounds ..." option!
very strange, any insights about this? is there a tweak to go with or is it a known WM defect?
Related
go to hklm\software\oem\voicecommand and set the value of "launchapenable" from 1 to 0
when activating voicedial from your headset (press connect button at the headset 2 sec.) it diverts all audio to the bluetooth.
works also with musik.
pressing the button again it disconnects the bluetooth and the main speakers are active again.
in this case the original voice dial does not work anymore until you change the value back to 1.
for me a good solution because i don't use voice dial and prefer insted skype and headset.
Very good tip...will try that!
Cheers...!
Works on QTEK S100 with Jabra Bt 250 Headsets?
Do you happen to know if the BT specification of the EXEC allows it to transmit stereo audio? Say from a mediaplayer to a BT car kit?
If so, that would send me over the edge and Id have to buy a BT carkit!
...ohh, on 2nd thoughts, it would also depend on the bandwidth too. Anyone know what sort of frequency range BT stereo may be limited to?
for stereo output is another reg.hack needed i think. because pushing the voicedial button at the handset it activates the bluetooth headset profile for listening to the voice but voicedial doesnt start. so you can use it for normal micro and loudspeaker.
maybe anybody knows how to activate in this case the "high quality audio profile" by editing the registry instead of "headset profile"?
Great job, The sound (in music) is good ? i tested this but the sound wasnt good.... I think my headset isnt good for music.
yes it depends on the bluetooth profile. for good quality "high quality audio" (A2DP) profile is needed.
blueangel
would this work on a blueangel running WM5?
gazela00 said:
Works on QTEK S100 with Jabra Bt 250 Headsets?
Click to expand...
Click to collapse
How did u do it....I mean yours is not a WM 5 OS...Pls advice
hdubli said:
gazela00 said:
Works on QTEK S100 with Jabra Bt 250 Headsets?
Click to expand...
Click to collapse
How did u do it....I mean yours is not a WM 5 OS...Pls advice
Click to expand...
Click to collapse
No it does not work in QTEK s100....
Works -but not great
very tinny muffled sound on my moto HT 820, was hoping it would work as well as the bluetooth stack update for the magician.
Sound does come out in both ears on my stereo phones. but I dont desire to listern to the tinny sound.
Still great find and discovery. Just hope someone can progress it to A2DP asap.
sorry, but can anybody tell me how to edit the registry in WM5? I never did it before. What tool do you guys use? Is it something free?
Thanks.
I used PHMREGedit
Here's the link:
http://www.freewareppc.com/utilities/phmregistryeditor.shtml
andyes....it's free.
Tried it with my BT200
I know the registry works....but cannot get it to play on the headset.
It works...becos upon pressing the phone button on the head set for 2 sec, the audio comes from the handset. On redoing it again, the audio goes off from the handset.
Mine is working fine. I really like the way its now.
Thanks a lot.
Ooops....
my Bt200 wasn't working. That's why there was no audio coming from it.
Need to figure out why there is no audio coming from the headset.
Sigh another problem!
So basically, the registry works.
Im using Total Voice COmmander and it works with WMP.. No need to install another software to play music thru BT.
I just press my Jabra headset twice and it goes "Say Command".. then I say "Play a music"..
Sometimes it's stubborn and Calls someone or Says "Today you have no Appointment" but I guess with a lot of practice, my Dopod understood what Im saying and played me a song.. Now, Im having trouble with my Dopod catching the title of the song i want it to play. I've placed voice tags on the songs and 50% of the time, my dopod got it right.. got to work on the other 50% though..
I have successfully made my ANYCOM stereo Bluetooth headphones ( http://tuxtops.com/node/464 ) to work wtih my HTC Wizard using the "wireless stereo" instructions that were posted the other day on this forum.
When you set it as "wireless stereo", is it supposed to also switch to handsfree functionality automatically? You see, over here this doesn't happen. The music stops when I get an incoming call, but I don't get the person's voice through my headset. The headset does not switch to handsfree mode.
Is this normal? Or something else is wrong?
I connected to my headset by clicking "set as a wireless stereo". If I also click "set as a handsfree", I don't get any music you see. So, why my headphones don't automatically change mode to handsfree on an incomming call? Anyone else with this problem?
i have the same problem but it doesn't bother me.
but if there is a fix then this would be cool and easier.
A2DP support for HTC Wizard can be obtained by using this hack/tweak: http://forum.xda-developers.com/viewtopic.php?p=275506#275506
didn't try it myself, but has been reported to work on HTC Wizard and other Windows Mobile 5 devices.
CIAO!
VOODOOS!L
Any solution so far?? I will receive my Anycom BSH-100 within the next days...
I don't think there is a solution apart from praying for a new ROM.
it might be a problem with the headset and rom
did you try repairing it?
because i know everything works fine for me using itech stereo
when a call comes in, it switches no problem
After reading very long threads about this issue, many changes in the registry and some full pda restores, I haven´t found the way to redirect all the sounds to the handsfree in my TRINITY.
Has anyone managed to make BTAudio or any other program work with a Trinity?
I think that as long as the handsfree headset you use supports the A2DP profile then all audio is redirected to it without the need for any registry hack. At least that's my experience with my SonyEricsson stereo BT headset.
2 Types of Redirect
One is with A2DP where the bt device is compliance to it. I do not have one but I believe it will work fine.
Another way which I am using is via the Handsfree Voice Command channel. When a voice command software(Such as Cyberon Voice Speed Dial) is installed and when the recognition is triggered(usually by a button on headset), all audio is redirected to the the headset.
So the trick is to keep this redirection longer.
This is can achieved by changing two registry settings.
- Change the duration to something longer, like FFFF.
- Invalidate the voice command software execution.
[HKEY_LOCAL_MACHINE\SOFTWARE\OEM\VoiceCommand]
"VoiceCmdDuration"=dword:FFFF
"Path"="\WINDOWS\invalid_sddialer.exe"
With that, I have lost Voice command via my headset but I hardly do VC at all, and if needed, I had associated one of the button on my dopod to launch VC but I need to speak into the phone instead.
Not sure if this is the best way but it's the only way I know of untill I figure out other.
FYI, I'm currently using Dopod D810 with lvsw ROM (http://forum.xda-developers.com/showthread.php?t=299771) and a Motorolla H700.
anonimo said:
I think that as long as the handsfree headset you use supports the A2DP profile then all audio is redirected to it without the need for any registry hack. At least that's my experience with my SonyEricsson stereo BT headset.
Click to expand...
Click to collapse
Hello,
I agree with this.
I had not been able to get the Trinity to redirect audio to a sony HBH-IV835 heandfree device.
Since I've change for a Sony DR-BT20NX headset with AD2P profile it's working like a charm. No more registry hack or software needed.
Then registry hack only concern improvement of audio quality (bitpool and so on).
Sadly i'm not able to use real stereo (replace the use of joint stereo) because it's generationg a slight annoying hiss sound.
Is this still the status, also with WM6?
I can't believe it's not possible to redirect some kind of way like I've been reading in the Tornado treads.
Yeah, I'm also can't redirect all sound to my headset (Plantronics Pulsar P590) by one click or by launch some program. Every time I need launch BT Settings, open Devices tab, tap'n hold on "590Plantronics", and select "Set as hands-free" or "Set as Wireless audio".
Can't find other ways to do it - no registry hacks, no other...
Does this help maybe?
http://pocketland.de/product.php?prod_id=36311
I did not test it yet...
No, it doesn;t work too... All discussed programs (BTARouter, BTAudioNav, BTAudioToggle) are just redirect phone calls to the my headset. No audio output at all (headset icon doesn't appear).
Just found this:
http://bluetooth.pdatopsoft.com/SmartPhones/Bluetooth-Audio-Router
Anyone try it on Trinity? Its a new program to me.
clinton said:
Just found this:
http://bluetooth.pdatopsoft.com/SmartPhones/Bluetooth-Audio-Router
Anyone try it on Trinity? Its a new program to me.
Click to expand...
Click to collapse
I just tried it. Didn't work. I could hear it activating the speaker on the headset as I launched the app (soft hiss) but it didn't re-direct any audio. Voice calls only through the headset (which is the same as without the app installed). I guess it really only works for smartphones.
The registry hack worked for me but I need voice command so it's not really a permanent fix for me.
I'd be quite happy to buy a new headset too but I don't want something bulky or with wires everywhere like all the stereo ones on the market. The single ear clip on ones are just so quick and easy to use...
peon said:
I just tried it. Didn't work. I could hear it activating the speaker on the headset as I launched the app (soft hiss) but it didn't re-direct any audio. Voice calls only through the headset (which is the same as without the app installed). I guess it really only works for smartphones.
The registry hack worked for me but I need voice command so it's not really a permanent fix for me.
I'd be quite happy to buy a new headset too but I don't want something bulky or with wires everywhere like all the stereo ones on the market. The single ear clip on ones are just so quick and easy to use...
Click to expand...
Click to collapse
I saw a lot of different registry hack around here..
The one thath works on p3600 is?
I've tried a lot of but no one works.
I dont't need voice dial so it can be good.
I use my p3600 with a BT Helmet.. so I'd like to listen to tom tom inside..
thanks a lot.
Hi
I have the p3600 and a sony mex-bt 2500 and i can redirect all audio to the carcit but i have to connect with the audio (A2DP)conection and not the headset conection so you'r divice has to have the A2DP profile to work.
jaaphooi said:
Hi
I have the p3600 and a sony mex-bt 2500 and i can redirect all audio to the carcit but i have to connect with the audio (A2DP)conection and not the headset conection so you'r divice has to have the A2DP profile to work.
Click to expand...
Click to collapse
But my bike helmet is not A2DP compliant so I canìt use it.. :-(
Still no solution?
Hi you all,
is there still no solution for the Trinity?
I am actually experiencing the skipping problem, but I would be half-glad if I could redirect audio in mono to the headset.
Please advise!
IsiT_de...
Get headset that supports A2DP profile and it works fine. I have Plantronics Voyager 855 stereo, and it works flawlessly in mono or stereo mode with modifying any registry hacks. Music sounds awesome too with this headset, just like my bose earbud phones.
Hi everybody!
I've used several Nokia Symbian devices before my TouchHD and I've always used them with onboard navigation together with a bluetooth carkit.
Nokia 6600 + Parrot CK3500
Nokia N80 + Parrot CK3500
Nokia N80 + Parrot LS3400GPS
The great thing of this combination was, that every voice command from my navi software was transmitted over my car speakers and the radio was muted!
But with my Bury CC9060 and my TouchHD this great feature doesn't work!
1. Is there a special bluetooth protocoll needed?
2. How can I make sure wether it is the blackstones or the carkits fault, that I don't get voice commands over the car speakers?
3. When I start the MP3 Player in Manila the bluetooth carkit also keeps silent.
Nobody? Here are so many WM experts. Someone must have an answer!
Hello
What version of software are you running in the cc9060?
The latest is v1.74 and this works well with the Touch HD, all contacts are there only battery power level is not working on mine.
The problem you have might be that the car kit connects by default on A2DP and trys to output sat-nav and music via this, if you do not have the cc9060 connected to a aux input you will not hear the audio.
To get around this you can always disconnect the A2DP in the options of the phone ,Comm manager>Settings>Bluetooth>cc9060> then untick wireless stereo
then audio will come out of phones loudspeaker
I have my Touch HD and cc9060 connected to my Focus aux-in and use it as music player while running TomTom, the phone then overlays sat-nav directions over playing music they work well together, the touch screen music controls work well with manillla player and allow control of music without interupting tomtom
If you need to update cc9060 you can get new software from bury's website at
http://www.bury.com/en/hands-free-car-kits/system-bt-bluetooth-systems/cc-9060/software.html
hope this helps
CC9060 Software is already the latest: 1.74
I found these checked bluetooth options:
Wireless Stereo
Hands Free
I'll give that a try and uncheck Wireless Stereo!
Do you already know, that bury will release an actice cradle for the Touch HD in June/July 2009! Then I am able to load the battery while driving.
Update:
With unchecking bluetooth stereo, the navi software uses the phone speakers, whereas it is connected to the CC9060.
But there are still two disadvantages:
- Radio ist not muted when a call comes in.
- Not as loud as the car speakers
I've written to bury and they've answered me the same:
The device must be connected to AUX to hear something over the car speakers.
One question is still unanswered:
What is the reason, that Nokia devices where able to transmit the navigation commnands over the car speakers?
Bury mentioned, that the handy must support this!
Hi Pal
I have the parrot Ck3100 and it would play the sat-nav commands via the stereo speakers with my N95 but won't with the Blackstone. So it must be WM or the Touch HD that is not sending commands to the carkit. I also noticed that with my N95 when I got a text the sms alert was played through the car speakers the touch Hd does not do this.
Hope that helps and if you find a solution I would love to know.
Sully
Damn! Is it the handy operating system or the handy-brand?
As you mentioned already your symbian device is doing it right. But the WM6.1 device fails!
Maybe I should test it with the new omnia HD (also symbian OS) if it works!
Please report back if you find ourt anything more, I am sure it must be possible maybe with a reg tweak.
Sully
At the moment I don't see any possibilities to get that to work.
The manufacturer of the my new bluetooth car kit (bury) said, that it is very seldom, that a mobile phone sends navigation commands to the carkit. They are also not testing this feature, when they are adding a mobile phone to their supported phones list.
Should't a carkit in handsfree mode work as a headset?
Even Parrot was unable to say which device is generally sending every sound to the their carkit. But they said, that their carkit is reacting on EVERY activity from the mobile phone, when it is in handsfree mode.
We need more feedback from carkit / navigations users to finde the weak point!
Hi Pal
Just been reading about vjvolubilis and btmusic and some diamond users have managed to make it work. I have just installed it and will try it out on the way home tonight.
Sully
hungabunga said:
Hi Pal
vjvolubilis and btmusic
Click to expand...
Click to collapse
So those are the right apps? Are they free and maybe also available here?
I could test them, too.
they are free to use, i had some success with vjvoubilis. it worked but kept muting the stereo even though there were no commands from tomtom. for btmusic you need .net
sully
btmusic wants to have 2.0. But in my Rom .net 3.5 is already included. Does it work with you?
EDIT: After installing v2.0 via activesync btmusic starts but then a message "license expired 01/09/2008" appears.
I had to download .net 2 to make it work, the phone still works fine after installing version 2 and I am running duttys 2.7rom. Link for .net2 found on this page under requirments http://maxmobilesoft.com/index.php/software/btmusic
Sully
I thought in v3.5 v2 is icluded.
Get it to work now, too. But:
How did you solve the license expired message? Setting back the system language is starting the programm but not a solution for always.
use the link I provided above, you have to register to download but that version doesn't have licence problem.
Sully
Thanks a lot, but I've registered now, too. The app works.
But I am to tired to walk down to the car and test it. Maybe in a few hours after sleeping for a while.
go to sleep man and check it in the morning, there is no rush.
Sully
i cant get my hd to work with my intergrated bluetooth either.
i have tried software call JETware, that many people talk about... still my phone will not ask for the pairing passcode(password or key).
Any help would be great.
thanks
btmusic didn't solve my problem.
Igo8 did not talk to me via bluetooth and the manila music player, too.
i seem to get handsfree phone only when i connect the omnia 7 to my FMT300 BT handsfree car kit. I cannot stream music !
the FMT300 works fine with my BB Torch and HTC Desire
is this to normal?
Handsfree Device is the only Bluetooth profile supported by WP7 currently.
thx for your reply, and what a big disappointment.
so why do they post it in the specs if it doesnt work ?
http://www.samsung.com/nl/consumer/...dex.idx?pagetype=prd_detail&tab=specification
very misleading !
Sjengie said:
thx for your reply, and what a big disappointment.
so why do they post it in the specs if it doesnt work ?
http://www.samsung.com/nl/consumer/...dex.idx?pagetype=prd_detail&tab=specification
very misleading !
Click to expand...
Click to collapse
Disappointing! I remember WinMo 6.x had pretty much every Bluetooth profile under the sun! I'm going to try it with my BT headphones... see if anything happens.
CreepinJesus said:
Disappointing! I remember WinMo 6.x had pretty much every Bluetooth profile under the sun! I'm going to try it with my BT headphones... see if anything happens.
Click to expand...
Click to collapse
Done! I turned on Bluetooth and my headpones appeared instantly (as "headset"). Connected fine. I can play music through my Bluetooth headphones - tried using a marketplace sample as I don't store music on my phone.
@CreepinJesus,
thx for giving this a try, this made me give it a go at my older Parrot PMK5800 kit and guess what, the Omnia 7 was happy to pair and play music with this kit.
"can't have it all" i guess, but at least it proves a2dp over bt could work
cheers
Perhaps it only allows music playack over headphone devices and not hands-free kits? I don't have a hands-free thing to test it with.
I've been able to play music through A2DP to my Sony Ericcson MW600 headset no problem. A2DP is definitely supported by Windows Phone 7.
There is however, an issue with video. Video sound still comes out of the phone speaker, and is not sent over Bluetooth. It's an issue with WP7, not the phone and hopefully will be fixed in an update.
I can stream music over my Motorola T505 car speakerphone just fine
Enclosed the reply from the supplier (Technaxx):
"The music stereo streaming depends on the mobile phone functions.
Check if your mobile phone can be connected with the transmitter over the A2DP protocol.
(Some phones need to be connected with 2 separate BT profiles: BT Headset and A2DP)"
no clue what this all means.
As far as I can see the Omnia does not allow for any settings, right?
it just connects and one hopes it works
this apposed to my BB Torch where i can set different kinds of connections, the Omnia has no settings at all.
A2DP is the profile it needs to use for music. I think your headset is connecting only with the headset profile, so it cann't play music.
I'm not sure if you can set profiles... If you can, somehow, you need to set your headset to use A2DP, then you will be able to play music through it.
Thx for your reply.
The thing is the "headset" is an FM carkit and A2DP works fine when i connect any of my other phones (Palm Pre, Palm Plus, BB Torch and HTC Desire). In all these cases i get both handsfree phone and music streaming. No special settings needed. These phones also all allow me to change the type of connection from within the phone afterwards.
None of that when i connect the Omnia 7. Al i get is handsfree phone calls (a handsfree connected confirmation window pops up). No other connections ...
So i really think it is an Omnia 7 "absence of settings" compatibility problem. There are no settings available in the phone.
I am using my BB Torch at the moment also because market is not available in the Netherlands ...... not much fun with this phone
dont know what happened but i gave it another try today and now it seems to be working.
unbelievable ...
the thing is you still do not get to see the profiles that have been set but it works ..
thanks everybody for the support ...