I have the cingular 8125 and the plantronics 590a wireless headphones but I can not seem to find the cab file I need to enable A2DP. All I keep finding is ROM upgrades. Any help would be much appreciated.
here you go!
Thank you very much. The cab installed fine but I still can not get the phone to play music files over bluetooth. What am I missing here?
128d what ROM are you running? I believe you must have an AKU 2.0 or above ROM for the a2dp hack to work.
Also, did you soft reset your device after the install?
This is the thread that I used to get a2dp working on my Universal and 8125s (Yes I read the whole thing and you should too because nearly every problem is solved)
http://forum.xda-developers.com/viewtopic.php?t=48502&postdays=0&postorder=asc&start=0
Don't skip a reply, read the whole thing and all the pages. There's another cab file with the registry settings on one of those middle pages that saved me a lot of time and frustration. :wink:
My ROM is 2.25.11.1 WWE
Everytime you want to listen to music you have to go to Bluetooth settings and tap-and-hold where it says Plantronics 590, then choose Stereo headset. Very frustrating and I haven't found a better solution for it. I think the guy behind PhoneAlarm is working on a sollution though.
Dmon said:
Everytime you want to listen to music you have to go to Bluetooth settings and tap-and-hold where it says Plantronics 590, then choose Stereo headset. Very frustrating and I haven't found a better solution for it. I think the guy behind PhoneAlarm is working on a sollution though.
Click to expand...
Click to collapse
i dont have that problem with my HT820.. as soon as i turn on the device and bluetooth on my phone and they sync up i can start playing music in stereo... my settings stay
Unless I've missed something fundamental this must be an issue with the 9100. It seems that it switches between two settings, one for talking and one for music. If you watch a movie you also notice that the audio lags for 2-3 seconds. Obviously this does not happen during conversations.
In one thread on the forum they were discussing creating a little program or applet to activate the headset with just the push of a button. Haven't checked their progress lately though...
Dmon said:
Unless I've missed something fundamental this must be an issue with the 9100. It seems that it switches between two settings, one for talking and one for music. If you watch a movie you also notice that the audio lags for 2-3 seconds. Obviously this does not happen during conversations.
In one thread on the forum they were discussing creating a little program or applet to activate the headset with just the push of a button. Haven't checked their progress lately though...
Click to expand...
Click to collapse
interesting.. my ht820 dont switch profiles between music or talking... it still has the notorious skipping problem when playing mp3's.. but that dont bother me, i only got the headset for phone calls.. im going deaf in my young age from to many loud concerts and a phone call in stereo is very helpful to me
Dmon you trick worked. I can now listen to music with my plantronics. The only problem is the buttons on the headset dont function. Have you had any luck with this?
What player are you using? You have to use, as far as I know, WMP or the newest version of Pocket Player (think it's 2.8) if you want to be able to skip songs and pause etc. I use Pocket Player and I think it's the best player around but unfortunately it's not free. The equalizer is a lot better so you can play with the high registry to remove some of the hissing noices.
8125 A2dp CAB
Installed the cabinet file and it works well in terms of getting the audio to the Jabra BT320S. However, when using the stereo wireless function that it enables, it slows everything else on the phone. Takes 6 to 10 seconds to get the system to recognize any command.
Any suggestions as to what might help speed it up?
My skills are not such that I’m comfortable messing with the ROM (2.25.11.1 WWE)
Thanks for all your work.
Giving this a whirl with my 8125 running Molski 2.26.10.2 Final and Jabra 250.
Holy thread resurrection, Batman!
Here, try these cabs instead. This is the 3.3 stack. Install the cert. before you install the patch.
jwzg said:
Holy thread resurrection, Batman!
Here, try these cabs instead. This is the 3.3 stack. Install the cert. before you install the patch.
Click to expand...
Click to collapse
worked like a charm on my 8125
thx man
..?
Aslo for Wizard ??
mazterjay said:
Aslo for Wizard ??
Click to expand...
Click to collapse
Of course!
!!
Yeah,, U'r right,,, just tested it.. But got a minilag in about every 10-12 secs.. Its a lag of a second.. Each time.. Who know how-to fix this ??
ByTheWay.. I am using a Logitech HS210 ( AKA_ Logitech Mobile Stereo Headset..
Controls are working fine..
Related
...this guy got it working so it's possible.
http://msmobiles.com/news.php/4679.html
I received my HT-820 this morning.
I followed this guide and have successfully listened to music over the headset.
I've also recorded a voicemail message so the phone function seems to work.
Hello.
I got my Qtek S110 to work with the Motorola HT 820 too, but I have some problems.
- there are glitches in the playback. I think due to the fixed 195kbps connection rate (the device must transform the music played).
- I have more gitches and stops when the bitrate of the music is over 195 kbps.
- if I turn the audio redirection and auto mute on then I can not hear anytheng (eg. ringtone) when the headset swithed off. I have to manually turn off the redirection.
- the redirection only works with MS Media Player.
Is there any idea to solve this issues?
h2oo2h said:
Hello.
I got my Qtek S110 to work with the Motorola HT 820 too, but I have some problems.
- there are glitches in the playback. I think due to the fixed 195kbps connection rate (the device must transform the music played).
- I have more gitches and stops when the bitrate of the music is over 195 kbps.
- if I turn the audio redirection and auto mute on then I can not hear anytheng (eg. ringtone) when the headset swithed off. I have to manually turn off the redirection.
- the redirection only works with MS Media Player.
Is there any idea to solve this issues?
Click to expand...
Click to collapse
If you read the HT820 quickk start guide,
http://www.motorola.com/mdirect/manuals/QG-HT820HdPhns.pdf
It says that "Note: You may need to wait several seconds before
hearing music in the headphones while the devices
connect."
This is why the first few seconds of the song/track are skippy. If ther are ever connection problems, the same thing happens midway through the song.
When you turn the headphone off, you need to turn the bluetooth audo settings off as well.
These issues make me believe that this patch/update is only a beta/test version and not the real thing, especially as the Bluetooth on the HT820 is done by the same people that made this patch (CSR)
http://www.csr.com/pr/pr210.htm
Still the patch is an advancement for the Magician. Just have to work around it
quick question to ht820 owners,
can you tell me if you can use these headphones for voice dial?
bluetake bt450 cannot, you have to dial via phone, then headset can be used to hangup.
thanks
in advance
aliendad said:
quick question to ht820 owners,
can you tell me if you can use these headphones for voice dial?
bluetake bt450 cannot, you have to dial via phone, then headset can be used to hangup.
thanks
in advance
Click to expand...
Click to collapse
I would answer that question but I've never used voice dial. is that what Microsoft Voice Command is used for?
What I CAN tell youthough, is that on the second page of the manual, it tells you how to "make a voice dial call"
http://www.motorola.com/mdirect/manuals/QG-HT820HdPhns.pdf
thanks for the reply,
reading the instructions in "make call" first instruction says "hold button then speak after tone"
bluetake doesn't have that function
thanks again
two final questions, if you don't mind,
are they supplied with audio cable to use with non bluetooth music player?
and is the audio quality good or great or just ok?
thanks again again
aliendad said:
two final questions, if you don't mind,
are they supplied with audio cable to use with non bluetooth music player?
and is the audio quality good or great or just ok?
thanks again again
Click to expand...
Click to collapse
I don't mind.
Yes, there is an audio cable that will connect the headset's 2.5mm socket with a regular 3.5mm one.
The audio quality is as good as I've heard. Any audio problems you get with the PDA will be due to the bluetooth patch which I believe is still experimental.
The HT820 works very nicely particularly if the Magician is tweaked with Pocket Hack Master. The skips are barely noticeble and the lag at the beginning of each track is minimised. Voice Dialing works flawlessly with Cyberon Voice Speed Dial...the HT820 mic relays the command to the Magician...BUT...same issue with MVC...you don't hear the voice command relayed from the Magician back to the headset.
The one thing that I have not been able to work is the "resume playback after a phone call" even with the option ticked off in /menu/options/playback in Windows Media Player. Everytime I answer a call or make a call, WMP reverts back to the default Library opening screen. I've read in the other thread that others have had it working the way it should.
Any ideas?
shanghaishah said:
The HT820 works very nicely particularly if the Magician is tweaked with Pocket Hack Master. The skips are barely noticeble and the lag at the beginning of each track is minimised. Voice Dialing works flawlessly with Cyberon Voice Speed Dial...the HT820 mic relays the command to the Magician...BUT...same issue with MVC...you don't hear the voice command relayed from the Magician back to the headset.
The one thing that I have not been able to work is the "resume playback after a phone call" even with the option ticked off in /menu/options/playback in Windows Media Player. Everytime I answer a call or make a call, WMP reverts back to the default Library opening screen. I've read in the other thread that others have had it working the way it should.
Any ideas?
Click to expand...
Click to collapse
Where can I get this pocket hack master?
I did't change any of the settings and mine automatically resumes playback after answering a call.
www.pocketgear.com ....cost 15 bucks.... worth it IMHO
download the trial and give it a spin... buy it if it works for you....
you'll be able to overclock or underclock your cpu speed and set certain fixed speeds for certain applications... I've found that different settings works best for different machines...tried it on three different Magicians with different ROMS and different applications... the settings that works best for my Jam and the HT820 are :
CPU between 260 to 520
Bus between 104 to 117
Ram between 52 to 59
LCD between 52 to 59
you've got to find what works for you... Not perfect mind you, but certainly a LOT better then without...like I said I barely notice the skips and depending on the CPU speed set, the delay at the front of each new track can be cut to a split second... all my tracks are at 192 kbps BTW... mow if only I can get the darn WMP to resume play after a call ... :evil:
I need help.. .please
Hi all,
I am new to this forum...and obviously not so bright on the settings etc of the XDAIIi of mine...for your info my XDA details are as below,
ROM version - 1.11.00 WWE
ROM date - 01/27//05
Radio version - 1.00.00
Protocol version - 1337.39
ExtROM version - 1.11.169 WWE
The way i look at your radio version and ROM version... they are far more bigger than the number that I have on my XDA.... is there any update link you can provide for me to improve my XDA???
Second Q is, I have bought the motorolla HT820 and i would like to have Stereo Bluetooth enabled on my XDA.. but i don't know the hows ...
Can someone please guide me through step by step....I would really appreciate it.... Many Thanks....
Re: I need help.. .please
mizou_takasyimaya said:
Hi all,
I am new to this forum...and obviously not so bright on the settings etc of the XDAIIi of mine...for your info my XDA details are as below,
ROM version - 1.11.00 WWE
ROM date - 01/27//05
Radio version - 1.00.00
Protocol version - 1337.39
ExtROM version - 1.11.169 WWE
The way i look at your radio version and ROM version... they are far more bigger than the number that I have on my XDA.... is there any update link you can provide for me to improve my XDA???
Second Q is, I have bought the motorolla HT820 and i would like to have Stereo Bluetooth enabled on my XDA.. but i don't know the hows ...
Can someone please guide me through step by step....I would really appreciate it.... Many Thanks....
Click to expand...
Click to collapse
Log-in to the forum and go here
http://forum.xda-developers.com/viewtopic.php?t=33532
Download the file on the 1st page.
Install it on the PDA.
Follow the steps on the top of this page.
This topic may be of interest to those who have the Motoroal HT820 bluetooth headset, and want to tweak music playback.
I prefer to untick "automute" so that I can hear the phone ring and can issue Voice Commands with MS Voice Command. Problem I was having, every time I opened Windows Media Player to stream music, it would blare out of the internal speaker as well. Here's the fix:
http://forum.xda-developers.com/viewtopic.php?p=226814#226814
I´ve installed the cab file and activated the "stream audio" option, my headset is registered and connected, but it is not available in the list of headsets where i checked the "stream audio" box. The list is empty. Maybe just working with stereo headsets ?
Hey all i've followed the prompts time and time again but i come up with the issue that once connected to the ht820 and i open windows media player to play a song the following error msg pops up:
"Bluetooth is turned off. Bluetooth audio has been disabled. Enable Bluetooth audio by turning on Bluetooth, then select Use Bluetooth audio again."
I switch bluetooth off and on and the same msg pops back up when i go to play a song!!!
WTF???
I'm thinking that because i've installed this hack and the other bluetooth hack and removed soo many times i might be in need of a hard reset!
Help so i dont have too PLEASE
djtwok said:
I´ve installed the cab file and activated the "stream audio" option, my headset is registered and connected, but it is not available in the list of headsets where i checked the "stream audio" box. The list is empty. Maybe just working with stereo headsets ?
Click to expand...
Click to collapse
Yes, just stereo.
There is a mono way though.
boh113 said:
Hey all i've followed the prompts time and time again but i come up with the issue that once connected to the ht820 and i open windows media player to play a song the following error msg pops up:
"Bluetooth is turned off. Bluetooth audio has been disabled. Enable Bluetooth audio by turning on Bluetooth, then select Use Bluetooth audio again."
I switch bluetooth off and on and the same msg pops back up when i go to play a song!!!
WTF???
I'm thinking that because i've installed this hack and the other bluetooth hack and removed soo many times i might be in need of a hard reset!
Help so i dont have too PLEASE
Click to expand...
Click to collapse
Make sure Bluetooth is on and the phone is not in flight mode.
If all else fails, backup your data (xbackup) and hard reset.
Hi
I want to know if the Motorola HT820 works with my Xda II following all the steps you say here?
I have ROM 2.20.07
Thanks
Has anyone been able to make these headphones work with the wizard?
I have searched forums but cannot find a solution.
Hp do not have any drivers to install onto wm5 operating system.
Any help will be greatly appreciated.
you don't need drivers. Just use search to find the cab update en use them.
I've just received mine: they work perfectly!
just bought a set, Help
:?: Hello, I just bought a set of these off ebay, have t-mobile mda vario flashed with the cingular rom. I am reading your posts, but cannot figure out what you are talking about with the cab update. my device finds the hp headphones just fine, but there is no usage choices listed,how do I get these things to work? is there an install file I can download? Please help.
HasC,
I've got the Logitech one and they are the same as HP.
Power of the headphones and keep pressing the power button until the led flashes red.
Then you can connect it to the wizzard with the usual 0000 pin.
Did it with mine and it works.
Cheers,
Drifter
thanks for reply, but pairing not the problem
Hello, they paired just fine with the wizard, but how do I tell the wizard to play the audio through the headphones and not the internal speaker?
Drifter, you the man!!!
Mine is working beautifully now, your instruction to wait for red light to flash solved the problem.
Thanx
totally confused now???
Hello again, They are paired, but there is nothing listed in "Services to use from this device" List, is there some software or driver I need to install? is there some menu choice I need to select somewere. Please help.
jappetto,
I am also using the cingular ROM, all I did to make them work was to follow Drifter's example on pairing them. Once they were paired it just worked straight off any audio player that I used, eg Mort player or windows media player, WM allows me to forward tracks as well.
I really dont know why you are having trouble, try removing all bluetooth paired devices from your phone and pair the headphones first. This may help
Still confused
"cab update en" sounds like software I need to download. am I using the wrong rom?
tried deleting all and pairing headphones first.
sees them but there is no services listed to use. how do you tell media player to play through headphones? does it happen automatically when you turn yours on? or is there a button or command I am missing?
read all about the A2DP update in the Tornado forum as well as the A2DP threads here before you start to use your headsets. You will need A2DP to make these awsome HP headphones work to their fullest abilities.
Japetto,
I am using this ROM:
ftp://xda:[email protected]_RUU_WIZARD_217_AKU2_WWE_CF2_A2DP.exe
It has A2DP settings configured already.
When you pair the headphones with this ROM installed, make sure your volume is not on silent on phone (should adjust automatically) when using headphones. If you are using WM player and cannot hear sound through headphones, press round connect button between the volume and track forward/reverse buttons ( the same one used to pair the headphones). this should establish a link with the headphones and start working.
No other software/drivers are needed to make them work.
Hope this helps.
ive got the normal tmobile uk rom...would it work??
what its the quality of sound from the headphones...when compared to the headphones given with the MDA Vario
also could someone direct me to a link where i can buy them from
Thanks
I'll Try it
thank you HasC
SBouri,
No, you need to change ROM so that it is A2DP compliant, at present t-mobile have no ROMS for this, mine was originally T-mobile ROM.
The quality of the headphones are fantastic, they are better than vario supplied ones because they are wireless and I have had the phone upstairs and was able to listen from kitchen downstairs, occasionally there was some interference, but close range, worked seamlessly for me.
HasC, fair enough mate..ermm i'd rather not upgrade my rom as i dont want to take any risks which will turn it into a brick
i am a techi but the phone doesnt give problems as other people post about..so id rather just keep the current t mobile rom
thanks for the reply though
SBouri said:
HasC, fair enough mate..ermm i'd rather not upgrade my rom as i dont want to take any risks which will turn it into a brick
i am a techi but the phone doesnt give problems as other people post about..so id rather just keep the current t mobile rom
thanks for the reply though
Click to expand...
Click to collapse
You don't ned to upgrade your rom to get your stock Tmobile MDA to work with BT stereo headsets!
Just install the A2DP hack.cab found in this thread http://forum.xda-developers.com/viewtopic.php?t=48535&highlight=a2dp and your stereo headset should show all options for Handsfree, Headset and Wireless Stereo.
I have not upgraded my rom, as I agree with SBour, I *can* do it but it's not worth it to me just yet....
I am using the stock Tmobile Rom, the A2DP hack and I-Tech Clip s35 stereo headset. The sound is lound and crystal clear.
Jaidnoire, nice one mate, will give it a go and ill order the headphones asap...i found a site through kelkoo for £48...is that cheap compared to any other sites you may know of?
Can anyone tell me what the battery life is on the Motorola HT820? As i manily want to listen to MP3s of my Vario
The HT820 manual claims 14 hours for music listening or 17 hours talk time.
Is it possible to play music through a bluetooth headset? Not a stereo headset, just a normal, mono headset.
If so, does it automatically pause the music when you get a call?
yes you can using the bt audio software on http://www.htcwizardweb.net/system/files?file=btaudio.zip
download it unzip it and copy the folder to your storage card or your pda and enable or disable it at your convinience. hope i was helpfull
I tried that BT Audio app with the 750, and it doesn't work. I also tried every media player I could find...still nothing.
Has anyone had success with this theory working? I need it in a BAD way.
Here is a .cab file that does what you want it to do.
First activate your Bluetooth unit. Then stream your music or whatever. Then turn on the software. It works quite well.
Enjoy !!!
What I do for my 8125 is activate the BT toggling program and then Mortplayer. I tie the two programs together using MortScript and then activate a playlist through voice command by creating a shortcut into the Programs file.
usng bt headset with htc wizard with fafio crossbow
yes it is capable to do this i have wizard htc running clocking at 286 speed, tomtom mobile 5, with the jabra 2020 bluetooth earpiece all works great gps every single thing to do with sound comes through ear piece even key tapping try this program called btnav you can download it then allocate one of the the buttons to activate it as i do. my normal day using gps system intails switching on earpiece then wizard, pushing allocated button my earpiece beeps then start tomtom all works great then when at work i can listen to audio tracks aswell great little toy hope this helps
zcink said:
Here is a .cab file that does what you want it to do.
First activate your Bluetooth unit. Then stream your music or whatever. Then turn on the software. It works quite well.
Enjoy !!!
Click to expand...
Click to collapse
BEAUTIFUL THING
Bluetooth Audio
I've downloaded the bluetooth audio to my Samsung Blackjack II and installed it. I have tried several combinations of steps to get the music to play through my headset but I cant get it to work. Do you have any suggestions for me? Is there a specific bluetooth headset I need to get? Or did I just mess something up?
Hey thanks alot for this cab because I've been looking for this cab all over and finally you had the solution to my problem.....
I just installed that cab file and while it seems to function correctly by sending music to the earpiece on the phone, it does not send it to the BT device. The BT device acknowledges when the program is turned on and when it is turned off, but no sound is coming out.
I'm using a Blackjack2 and an Isymphony BT headset/speaker which is not stereo.
I just want to be able to hear my phone on my BT headset/speaker.
Is there some setting I'm missing? Does this program not work? Why for some and not others? Where can I find documentation? Who made that program?
Well, I dont know why you blackjack people are here(this being the Wizard forum and all!), but what I used to use on my Excalibur is the little shareware program called:BTAUDIO(link at bottom of post)
Its shareware in the fact that it only works for 30 minutes at a time, but it does indeed send ALL audio that the phone emits to your bluetooth headset.
Instructions:
1-Install BTAUDIO .cab to your phone
2-Activate your bluetooth headset, and put it in "find" mode
3-Goto your phones comm manager and turn Blueooth on
4-Now pair your headset with your phone
5-Start BTAUDIO
6-Follow the instructions on the screen and BAM, you are done!
I hope that helps!
DOWNLOAD LINK FOR BTAUDIO=
http://www.megaupload.com/?d=9MLLW0MC
Thanks for the reply.
I gave this program a try and it didn't seem to work either. I'm guessing it's a BlackJack problem. That download appeared to be pretty much the same thing as the other link to the "BTaudio" program by Triangle but is limited to 30 minutes, like you said. The first link was not limited to 30 minutes. (so you might want to check that one out)
As for why the Blackjack guys are coming here I'm guessing it's the same reason I found this place. A Google search.
The Blackjack forums don't seem to have any solution other than... "go spend another $75 on a new set of headphones"
Myself, I want to use a BT mono speaker for listening to mono recordings and don't really want a stereo headset.
Thanks for all your help!
THANX for the CAB file
REaly thank you for the cab file works gr8.......................................
Thanks...
This one is very nice. I can't speak for others, but here is what I've learned in a short time....
My personalized ring tones are now coming through the BT, along with the called annoucement. Sorta disorienting, but I like it. I bet if I disable call annoucements, this will fix it. I'll look around..... Thanks for this tweak....
I love it!
thanks
hi this is the first time i am using this site hope it works
I just intalled this cab on a Samsung Ace i325 6.1 (Sprint). I'm using the Jawbone II bluetooth and it works perfectly! Thanks for the cab file.
Hi ,
i really appreciate you cooperation about this issue
i have the same problem but with java platform phone SE w550i) with bluetooth headset
i need a java application that let me hear the music via bluetooth headset (application like msi blue player) in jar format
Can any one help (regarding that my bluetooth headset support a2dp and w550i has no problem with that just need application to stream audio through bluetooth headset)
thanks in advance
my mail is [email protected]
THANX for the CAB file
zcink said:
Here is a .cab file that does what you want it to do.
First activate your Bluetooth unit. Then stream your music or whatever. Then turn on the software. It works quite well.
Enjoy !!!
Click to expand...
Click to collapse
thank you bro you solved my problem
This application works awesome... Great work
One issue occurred.... The BT Audio is switched ON, i receive a call, i answer/end it. After the call ends, the music is routed back to the phones speaker. I have to switch ON BT Audio again.
Keep up the good work
I've tried SuperDave's i730 fix/hack at pdaphonehome.com, every thing seems to work except there is no way, or option to select "set as wireless stereo".
I get no stereo from bluetooth, WMP still plays sound through the device speakers.
I tried the "zoad2p.cab" from this site (works on Cingular 8125)
Same results.
I've also tried the Tornado a2dp I found here.
It's working on devices with AKU2.6 but I get the same results
as with SuperDave's fix.
One interesting thing...
If you launch WMP and play a song then activate voice siginal, the music
IS sent to the head set briefly.
To keep it active, select settings>about and leave voice signal running.
seems to work like Bluetoothaudiotoggle for about 45-60 sec.
I wonder what is missing from these hacks that we need to make it work.
austinbrady said:
If you launch WMP and play a song then activate voice siginal, the music
IS sent to the head set briefly.
Click to expand...
Click to collapse
for some 100-200 ms? Then, you've run into the problem i've described (along with the solution) in one of my recent articles - see http://forum.xda-developers.com/showthread.php?t=282008
Menneisyys said:
for some 100-200 ms? Then, you've run into the problem i've described (along with the solution) in one of my recent articles - see http://forum.xda-developers.com/showthread.php?t=282008
Click to expand...
Click to collapse
Thanks, but it does not work for this device.
The audio is played only as long as the VoiceSignal application is open.
When I select the bluetooth headphones under listed devices
I get a popup for:
1.Edit
2.Delete
3.Set as hands free.
It's missing {4. Set as Wireless Stereo}
There is no option for "Set as Wireless Stereo"
Could this just be a missing Reg. entry?
(and I believe this is what I'm missing which may be the trouble).
Under Profiles, I have:
1.Hands Free
2.Wireless Stereo
3.Headset
*all have checkboxes.
I've tried every combination I can think of.
Thanks for your HELP, I really appreciate it.
Please move this thread.
Could a Moderator please move this thread over to Development and Hacking.
I think I might get more help there.
Thanks+
austinbrady said:
Could a Moderator please move this thread over to Development and Hacking.
I think I might get more help there.
Thanks+
Click to expand...
Click to collapse
OK, will move
I'm interested as well in a solution (sprint i80) but I can't even get the option to check off wireless or headset; the only thing showing up after pairing is handsfree.
any ideas?
Which hack have you installed?
Try Refresh...
They should pop up.
Menneisyys said:
OK, will move
Click to expand...
Click to collapse
Thanks for the help and move.
Actually, I had read that the bluetooth audio toggle wouldn't work with sd's hack, so I had removed the hack. I just reinstalled it and it sorta works in conjuntion with the toggle; I can play audio over my bt headset, but an incoming call disconnects it and I can't hear my caller. Work in progress.
I currently have the i-tech clip and bluetake i-phono; the clip gives me music but no calls and the bluetake gives me calls and no music......
I also have a pair of the sony hbh something or other, but I'm trying to find them in my house!!!!
lido said:
Actually, I had read that the bluetooth audio toggle wouldn't work with sd's hack, so I had removed the hack. I just reinstalled it and it sorta works in conjuntion with the toggle; I can play audio over my bt headset, but an incoming call disconnects it and I can't hear my caller. Work in progress.
I currently have the i-tech clip and bluetake i-phono; the clip gives me music but no calls and the bluetake gives me calls and no music......
I also have a pair of the sony hbh something or other, but I'm trying to find them in my house!!!!
Click to expand...
Click to collapse
SuperDaves' hack for the i730 (I think is based on the Tornado Hack found here on xda) will not Work at all with the i830's bluetooth stack. It seems to be completely different. After you install it and try to use it you will get OS errors if you have error reporting turned on.
AudioToggle.exe seems to work fine, except its mono.
+ (the whole call answer issue)
I've also tried the Wizard hack with the same results.
I really hope we can find a device with the same bluetooth stack/build and figure out what we need to add to enable a2dp.
I found this file a couple of days ago in another forum under xda-developers.com. I can't remember exactly which one so I'm posting the file here for anyone that needs it because I can't find the link I downloaded it from.
There are three files in the btaudio.zip archive. BTAudioOff.exe, BTAudioOn.exe and BTAudioToggle.exe. If I read correctly BTAudioToggle.exe works as a stand alone file. Just save it anywhere, create a shortcut or map a button to it and you're done. It'll basically toggle the BTAudio on or off. Pretty simple. The other two files are self explanatory, one turns on the feature and one turns it off. I tested it today while watching a movie on my XDA. Works pretty nicely and I've found no bugs yet.
This works perfectly with my Jawbone. Yes, it will probably drain the battery on the headset but I only use it in temporary circumstances.
Hope this is useful to someone else.
the hp ipaq 6965 which i had before the x7500 had this feature built in, i'm wondering if windows mobile 6 will have it as well,
also, i tried this program and once you tap the answer button on your headset the audio goes back to the phone
Thanks for the heads up. I'll know to toggle it back on or turn it down.
it doesn't work when there is a call ..I mean it auto switch off and then no sound from BT..this app has been around for an year but practically no use..
Another tool
Hi,
you can use btIO for the same. It's a tray app so there is no need of shortcuts for on/off/toggle.
Find it here:
http://www.silentservices.de/btIO.html
Cheers
Perfect for my needs - just received a set of Sony DR-BT30Q Stereo headphones from ebay and they work perfectly with this.
Doesn't stereo headsets (A2DP) work without the bluetooth audio gateway? At least mine do...
c0rnholio said:
Hi,
you can use btIO for the same. It's a tray app so there is no need of shortcuts for on/off/toggle.
Find it here:
http://www.silentservices.de/btIO.html
Cheers
Click to expand...
Click to collapse
Hi c0rnholio. Nice application, thanks.
I only have one problem though, whilst I can activate audio2bt successfully and I can hear music via my ordinary BT earpiece, it also automatically invokes my voice calling software thus switching the audio2bt immediately off.
Any ideas how to overcome this?
mackaby007 said:
Hi c0rnholio. Nice application, thanks.
I only have one problem though, whilst I can activate audio2bt successfully and I can hear music via my ordinary BT earpiece, it also automatically invokes my voice calling software thus switching the audio2bt immediately off.
Any ideas how to overcome this?
Click to expand...
Click to collapse
Well, if you don't use the built-in voicespeeddial then it's pretty easy.
Just set: HKLM\software\oem\voicecommand\launchappenable to 0
MS-VoiceCommand will still work after this reg-change.
If you do use the built-in app then I have no idea.
c0rnholio said:
Well, if you don't use the built-in voicespeeddial then it's pretty easy.
Just set: HKLM\software\oem\voicecommand\launchappenable to 0
MS-VoiceCommand will still work after this reg-change.
If you do use the built-in app then I have no idea.
Click to expand...
Click to collapse
Thanks for that cOrnholio. I'll apply the reg change and get me a copy of MS Voice Command (everyone says its crap anyway, so it's time to upgrade ). Thanks again.
c0rnholio said:
Hi,
you can use btIO for the same. It's a tray app so there is no need of shortcuts for on/off/toggle.
Find it here:
http://www.silentservices.de/btIO.html
Cheers
Click to expand...
Click to collapse
Looks awesome! Thanks.
I tried. Looks good.
What is AudioGWCC ON/OFF?
The problem is with the scenario: I switched audio to headset, listen to music, incoming call, I pick up, music paused (Mort player), I hung up, music starts again, but it switched back to the device.
Any idea?
di2307 said:
I tried. Looks good.
What is AudioGWCC ON/OFF?
The problem is with the scenario: I switched audio to headset, listen to music, incoming call, I pick up, music paused (Mort player), I hung up, music starts again, but it switched back to the device.
Any idea?
Click to expand...
Click to collapse
AudioGWCC is the Switch for the Audio Gateway Control Channel. I've put it in because of some headsets required to explicitly establish the control channel first (from what I've seen). The behaviour you described is normal. The device closes the control channel after a call is finished. I don't know if there is a way to deactivate or to circumvent it.
c0rnholio said:
Hi,
you can use btIO for the same. It's a tray app so there is no need of shortcuts for on/off/toggle.
Find it here:
http://www.silentservices.de/btIO.html
Cheers
Click to expand...
Click to collapse
oh men, this is really one of the most important tools what you can download and install it on the Ameo.
I couldn't say how much do I have to tell you : thank you.
BTIO together with WifiIO are the perfect combination to manage complete BT and also WiFi from today screen.
And it's freeware too. absolut perfect.
Gentlemen,
I am sorry to bother with the same topic, looks like all are happy with BtIO and similar utilites...
I have a problem that drives me crazy...
I am listen to audio books (using Mortplayer) a lot, the problem with incoming calls:
1. Switch audio to headset, sound plays in headset. Perfect.
2. Incoming call:
.........Device is switching sound to a loudspeaker
.........I hear 0.5 sec of loud sound comming from a device
.........Audio playback is paused
.........Ringtone plays from loudspeaker
3. I pick up the call using headset button
.........Audio switched back to headset
.........I can hear some ringtone sound for 0.5 sec
.........Phone conversation
4. I hung up using Phone button or headset button or another party hung ups
.........Audio playback resumed
.........Audio switched to loudspeaker
5. I have to act quickly to switch audio back to headset by pressing button. This is very annoying
I tried utilities:
acbToggleBT-0.8.cab
BTAudio_PPC.ARMV4.CAB
btaudiocf1.cab
btaudiotoday.cab
btIO-0.5.CAB
bluemusic 2.0.[desktop].exe
BlueMusic looks the best, still it can't detect the scenario (5)...
Looks like I am missing something... This problem looks a very basic for me and I believe should be already solved...
Please help!
Also, I don't see a practical value of utilities above... I can svitch Audio to BT and back just by clicking the button on a headset. (I desabled the Voice comander)
Regards,
Dimitriy
I haven't found a program fix that will resolve the issue yet. I love the utility and use it knowing what to expect. Doesn't make it useless, just isn't 100% perfect for some users. For me it works perfectly. I'd rather it have one bug than it not work at all. Maybe one day they will update the program but for now it's great for my use. I just take an extra moment to pause manually what I was listening to when a call comes in or while i'm on the call so this doesn't happen to me. Especially if I'm at a client site.
ltxda said:
I haven't found a program fix that will resolve the issue yet. I love the utility and use it knowing what to expect. Doesn't make it useless, just isn't 100% perfect for some users. For me it works perfectly. I'd rather it have one bug than it not work at all. Maybe one day they will update the program but for now it's great for my use. I just take an extra moment to pause manually what I was listening to when a call comes in or while i'm on the call so this doesn't happen to me. Especially if I'm at a client site.
Click to expand...
Click to collapse
I see your point. Can you explaine what exactly problem it is solving for you?
I can switch audo to BT and back by just clicking Send button on the headset. So what is the use of the utility?
hello poor guy me is the same i have tested all audio to bluetooth software and nothing work i have try the reshack on this site to put stereo to mono and nothing work i am disapointed the only solution i have is buy a stereo one because on the samsung i320 you have an option to use that kind of hardware.
if any person have a solution it was great
(sorry for my english)
With my headset (www.jawbone.com) if i click the button it activates audio to bt temporarily. It'll activate MS Voice Command then turn off. there are registry hacks that allow this to work differently but I prefer a utility to control it through. I havent been able to get audio to bt like many other users. I can watch movies, listen to my Corelayer, audiobooks, voicemail though email, etc in private. My device, HTC Advantage/x7500 can't do this by default. Maybe your headset allows these featured while mine doesn't. My headset is not meant to be used as an always on audio device so I need these utilities.
ltxda said:
With my headset (www.jawbone.com) if i click the button it activates ....
Click to expand...
Click to collapse
Well, I am using the LG HBM-700, it has a numerical keypad and OLED display, so it is very handy with X7500 - I can keep X7500 in a bag while using it as a phone.
http://blackberryforums.pinstack.com/10363-review_lg_hbm_700_style_i.html
I tested several BT hansets and all alows to switch audio to BT and back with the Snd button. You need to disable Voice Commander:
"HKEY_LOCAL_MACHINE\SOFTWARE\OEM\VoiceCommand\LaunchAPEnable" set to 0
What I can't blieve, that so basic problem is not solved. People on XDA using WM devices for years... Using BT for music and phone functions is a basics...
Any ideas?