Hi All
When anybody trys to send me a file through bluetooth on my wizard they get a connection failed message, IR still works though.
THis happend to anyone else, fixes?
THanks
i get this too not sure on a fix tho sorry
I think I know the answer to this problem :idea:
Go to Start>Settings>Connections>Beam and tick Receive all incomming beams.
This happened to me for ages but as soon as I did the above I could receive files through bluetooth.
Seems strange that it is called "Beams" as this would indicate IR to me.
Hope this gets you sorted
Wow, you are the man!
I thought i would save some battery and turn that off lol.
Glad to have helped.
Related
Hi,
Somebody please help me.
Iam not able to recieve any files from anyone using bluetooth. On the senders screen, it discovers my phone but if you send something, it says sending failed. Does this have anything to do with beam option? sometimes it works and sometimes it doesnt? Any resolutions..? I have my bluetooth on and on discoverable mode, i have unchecked the pass key option.Please help..
thanks/..
nishant
did you enable incomin connection?
IT is all about "Beams". You must be set up to receive Incoming Beams. I know it is confusing as we all assume that is related to InfraRed Beams, but "NO", it applies to Bluetooth as well.
But be warned, with Incoming Beams ticked, it can drain your battery, so I only switch it on when I need to receive a file.
When i'm connected to internet via GPRS via WMODEM (USB). Now, when someone is calling me, then he get one signal and next busy signal. I don't see that someone was calling me, but that's not the worst problem.... When someone send me sms, then he gets a Delivery OK raport, but i haven't that sms...
(btw. when i'm connected to GPRS via handheld, then everything is allright, when someone is calling me, then i see it and i can answer (then GPRS get disconnect) and when someone send me sms, i get it and can answer (without disconnecting GPRS))
Why is that, and how i can fix that ?
I solved the problem. I installed newtest rom, radio and BT... and now everything is better... 4 big problems solved... but i lost guarantee :/
Hi !!
I have just bought a O2 XDA mini and for some reason it just doesnt recieve data from other devices over bluetooth!
i can send ( i am paired correctly!!) data !! but cant recieve data!! the sending bluetooth device always says send failed ... or recieving bluetooth device ( i.e. my xda) is not responding!!!!
i am really getting :evil:
anyways i would realy appreciate some help!
i wonder if its something to do with the damn ports!!!
Same problems here. I have tried with Ipaq2210, SEk700i, Nok6230, Samsung600 all paired up ok but file transfer is never a discovered avilable service.
Sending fails whether initiated on wizard or other devices. I believe it is down to the Microsft bluetooth stack as the Ipaq uses widcomm stack and works with all the above phones.
I'm hoping someone will find a reg hack to improve the functionality.
What with no wifi activesync my recent upgrade from Ipaq and K700 to wizard is leaving me feeling cheated.
Al
go to start>settings>connections>beam, and make sure you tick the "receive all incoming beams" option.
i had this problem before and i couldn't recedive any file through bt, but when i checked this i receive anything now, and it shows the "file transfer" profile when i initiate the pairing from another device.
i hope this works for you guys.
cheers.
Hi Folks,
I'm running Hemi's AKU3.5 at the moment, (great), but I'm having trouble with bluetooth file transfers.
A mate keeps tring to send me dodgy video clips via b/tooth but I never recive. He can send successfully to other devices, just not me.
Bluetooth is on and visable.
Any idea what I need to do????
TIA
Mav
Turn on Receive all incoming beams, from settings -> connections.
joannaex said:
Turn on Receive all incoming beams, from settings -> connections.
Click to expand...
Click to collapse
Thanks, I tried that and managed to recieve 1 file. Nothing else will come through now.
Any more ideas?
TIA
Mav
mavrik64 said:
Thanks, I tried that and managed to recieve 1 file. Nothing else will come through now.
Any more ideas?
TIA
Mav
Click to expand...
Click to collapse
Come one folkes, some one must have an insight into this. I have never had this sort of problem with other devices b4. Swapping files via bluetooth is usually easy.
TIA
Mav
Well if that is checked you should be fine really. Hmm well if you don't have a pair with the other device it should pop up asking you if you want to receive the file, if you don't answer within a few, the transfer will time out and your friend will get an error. You need to be a little more specific as to what "doesn't work" means. Is there an error? Are you getting a prompt? Have you tried pairing?
joannaex said:
Well if that is checked you should be fine really. Hmm well if you don't have a pair with the other device it should pop up asking you if you want to receive the file, if you don't answer within a few, the transfer will time out and your friend will get an error. You need to be a little more specific as to what "doesn't work" means. Is there an error? Are you getting a prompt? Have you tried pairing?
Click to expand...
Click to collapse
Thanks for the help.
BT is turned on and Discoverable. Recieve all incoming Beams is Ticked. The devices are paired. Mates phone starts send but is unable to connect to my device.
I soft reset earlier, and checked all the settings. Re-paired the devices and was able to recieve the 6 files he sent me, but the next time he tries to send anything, his phone is unable to connect to mine. Its almost like the BT stack corrupts after a data transfer.
He tried to send me a file just now, couldn't connect.
I have just tried another Soft rest and now I can recieve the files.
Very odd.
Mav
are you sure OBEX is enabled??
if you're not sure, search for the 'enable OBEX' over the forum cab and install.
shlomki said:
are you sure OBEX is enabled??
if you're not sure, search for the 'enable OBEX' over the forum cab and install.
Click to expand...
Click to collapse
Yup, its enabled. Checked in the reg files, value=1 (on).
cheers
Hi all, I have searched but can't find an answer..
I keep getting - "can not connect with current connection settings" when trying to do a send and receive through email. I have yahoo and googlemail accounts.
I upgraded to Polaris 0.67_Opera_bepe and had the issue initially. I thought I may as well try Polaris.ASerg.3.WM61.WWE to see if that would remedy it.. but still i have the same issue.
My connection settings should be correct as I have used UK_Setup_ZD and that has always worked.
Worth me saying I have tried soft reset twice, opera / IE both connect and my MMS is fine too.
Could someone please help? It'll have to basics as I'm still new to this.
FYI : Polaris.ASerg.3.WM61.WWE is very very fast!! :O)
thanks for reading.
UPDATE: Not sure if this helps..
I have just turned on wi-fi and connected - This allowed me to update my inbox.
Turned Wi Fi off.
Tried again:
Data connection IS TURNED ON. Still have the same error message. "can not connect with current connection settings" and "Error Syncronizing"
@#!HELP!`~
Now this is weird! I got very frustrated as this did not make sense so loaded the HTC std Polaris rom.
Set the t-mobile settings as normal and proceeded to try and connect to email again... Nothing! same error again.
Went to watch TV for a couple of hours and came back to phone.
Closed all apps
Tried again and hey presto ! connection and downloaded email!
strange but true!
I missed something as this was not magic. I guess it was a strange request as nobody seemed to answer my request. If your having the same issue and reading this post good luck!
solved
Settings/ connections [tab]/ connections/ manage existing connections/
select connection
edit
then just keep pressing next and then finish.
Although the connection settings were there they were obviously not initiating when needed. This process seemed to confirm the settings and worked.
I may be talking absolute pony but it may help someone else like me.
Thanks all.