Please help: Smart Dial is missing on my cingular 8125 - 8125, K-JAM, P4300, MDA Vario General

I just recently reinstalled 2.25.11 WWE rom, thanks to risidoro tutorial, after unsuccessfull ROM change to Dopod 838 ROM.
After I reinstalled the original Cingular 2.25.11 ROM, the smart dial function is missing on my phone.
This is the feature that allows me to find the contact by dialing the first couple character of the contact name.
Please help how to get this function reinstalled? thanks.

Got my problem solved:
http://pdaphonehome.com/forums/sams...i-find-smartdialer.html?highlight=smartdialer

in the future, don't cross post.

Related

T-Mobile MDS with O2 Radio stack

Hi All,
I hope someone here can help me with this. I have a T-Mobile MDA, i was playing around with O2 site and i found the Radio Stack Upgrade 4.21. I upgraded it and after the upgrade was finished successfully, the Phone doesn't want to get service... asa it opens up it gives me the Antena and an ! next to it and says No Service.
What could be the problem and how can i get back the old stack.
Hope that someone can HELP me..
Thanks a lot in advance
Hi, if I'm understanding your problem correctly then what I suggest is:
Go to Start-Settings-System and select the Auto-Configuration application. This should allow you to choose your operator from a list and it will then auto configure your GSM/GPRS settings and reset the device, after which it should work.
Good luck
Steve
Hi
I cant' find any Auto-Configuration app what is it called?
thx
dat version dont have auto config :?:

voice speed command software in original rom

Hello,
I replaced my old ROM (I do not remeber its number) with the newest Dopod 1.23.707.6. Old ROM did not have GPS enabled. However it did have nice tool to voice speed command.
Does anybody of you have such program and could share it with me ?
Dopod does have voice speed command but it is not so easy to use as it was in my previous ROM. In Dopod you have to say i.e. "Call Mike". In the old one you could just said Mike and Mike's number was dialing.
Thanks in advanced.
http://forum.xda-developers.com/showthread.php?t=295238
Thanks Shayd,
Voice_TRI.cab is the one I was looking for !

Can anyone post the Rogers TYTN ROM?

Looking to use it
Thanks
is anybody have that rom ... or at least dump that rom
please
Does anyone know what Radio the Rogers ROM came with other than 1.42? Can we put another publiccally available ROM on the phone (i.e. did it ever come with 1.38 or other Radio)?
Roger TyTn wm5 rom file kooked by ziadsa
hi guys, here is my best i got rogers wm5 rom cooked in this file.
its a wm5 rom file that will put back rogers os on it and Enhanced caller id with name dispaly working.
download it from here.
http://www.mediafire.com/?1vl2xe515s9
i flashed it and got it working finally. i made a lot of reading.
let me know if you need any help.
Did you able to put new ROM for Rogers Tytn?..
Anyone get this working on a Kaiser? I installed the one cab posted here but I haven't had any calls that aren't in my address book yet.

Please Help!!!! I will dontate!!

Hello xda!!
I am very much a newbie and now I find myself with a brick of a phone. I wanted to put a new rom with the touch flo on it but it did not work. I upgraded to the SPL 3.08 I think that the right number and then I try to download the diamond 2.0. However the ROM did DL correctly but when I wne to configure it it said windows.autoconfig not found on my 8125 wtf is that all about. I own a cingular 8125. I dont know where to start now. All I want is the touch flow rom but how and where do I start. I even tried to flash it back to the HTC OEM rom but I could not do it. Please anyone?? Help por favor....
Regards,
David
I would try to help you, but you will need to type (give) more information that those that I give/ask you. I'll need to know
- Your phone, G3/G4, IPL/SPL/OS/Radio
- The OS you flash page, instructions followed
- Your PC OS used
Read the Wiki (on top of this page, XDA-Wiki) on Wizard section on how to un-brick your phone.
I have a g3 type but I dont have the phone with me. I switched my sim to my treo for now. the OS ROM I tried to flash it with was Diamond 2.0 my SPL 3.08. Any help would be greatful
As I said in my previous post, you'll need to give me more info. Example of more info http://forum.xda-developers.com/showthread.php?t=339014
UPDATE:
How do downgrade http://forum.xda-developers.com/showthread.php?t=335222
I have a Cingular 8125 and the ROM I currently have is a Wizard Love/ AKU 2.3
When I turn my phone on it reads this
IPL 3.08
SPL 3.08
GSM 2.25.11
OS. 2.26.10.2
This is what I wanted to do. I wanted to put WM6 with the Touchflo on it but now I am stuck with this ROM I know nothing about. When I try to flash it back to the Cingular ROM is will not update I need a new NBF file? If you can help I would be greatly thankful and would donate to you.
Cheers,
David

HTC Trinity Problem (Serious)

Hello, i have a problem with my HTC Trinity, since a few days, i can't connect to my network (Orange), but i can connect to other networks with an other sim (because my trinity is unlocked).
I have found that my IMEI was altered, i think i can put the imei number here because is not a really IMEI: 359426000000007, but on the back of my Trinity, only the 7 last numbers are differents. How i can restore the good IMEI ? And why the IMEI was altered like this ?
I did some research on how change this number but i can't found anything about this version of HTC. Please help me i can't use the telephone fonction in my principal network.
Sorry for my funny english but i consider this forum like the best in the domain.
I hope the trinity is already of actuality. Thank You.
help
I did a lot of research but i don't found anything, I think it's possible with Mtty, but i don't know how to use it. Please, can you explain me the way to do this (if some one know how we do it), i can't use the Gsm part of my trinity
I don't want to change my operator, thank you.
I have found a solution: my nokia 3210
If you have a solution please send me a message.
Thank You for "all" =)
Your emei is not self-altered
What did you do on the device ? ( flashing, installing,... )
Which is the radio version ?
Thank you for your response, i have actually a DOPOD official WM6.
I have tested to downgrade to a WM6 FAMAN and after a DOPOD official WM6 and WM5, but the IMEI don't change (only the last number change). I was return after to the WM6 dopod.
Before, I was tested many other ROM, and the problem is i don't know when exactly the changement was gone because i was'nt in my country for 2 month, i have used an other operator and the ROM i was tested was upgraded during these two months was : Faman & Schap's (french rom) and the FInixNOver, i had no problem before come back in france...
(I had tested also to upgrade the ROM Radio, but nothing too.)
I have read that we have to upgrade to a backup, but i have no backup, i have tested to using a tty program but i'm not good in this domain.
Thank you very much is somebody know a solution... (and sorry for english ^^)
imei problem
Hi,
The first 8 digits in the EMEI number are make and software version.
The other digits are problably overwritten by a software change. (unlock, flash, upgrade, etc)
Try EMEI CHANGER in Google
I already did this kind of search, but nothing for trinity.
what is your radio firmware version now?
I'm now in a 1.30 Olipro radio rom, i had before this recent upgrade the 1.50.08.11
Hi,
You can try http://gsmhosting.com/vbb/archive/index.php/t-341121.html
but returning to your previous radio might do the trick.
Don't work with trinity... changing of radio don't change anything.
I think the only option is get back to HTC in your country than doing too many resettings which make things worst.... I got mine "hang", after too many setting and reflashing..... ;(
Gd Luck.
this solution is too easy, i'm not this kind of person. Thanks anyway, i will test an other solution.

Categories

Resources