Hi Guys,
does anyone have a WM6 english ROM for the wizard yet ? I dont seem to be having much joy trying to find one.
much apprecieted.
Andy.
sorry guys, i have one i found - my mistake for being ignorant lol.
i need to update IPL and SPL to V2 .xx for both. how do i go about doing that ? and tutorials and files would be apprecieted
thanx
to upgrade to 2.xx, look for the official t-mobile usa 2.26 rom and flash your rom with it. after that you can move to wm6. just make sure that you're phone has been cid unlocked before you start the whole process.
i tried to update my wm5 to wm6 rc1 to my wiza200 (t mobile)
i followed all instructions as in Rc1 thread but this is what happened
my phone unlocked
cid unlocked
i upgrade the IPL/SPL to 3.08 both
but when try to install wm6 rc1 or any other wm6 it still give me the erorr 302
i tried to downgrade to IPL/SPL 2.26 but i failed all the times
please help me i lost every thing
please hellllp me i want either to install the WM6 or go back to tmobile wm5
note the only os can be installed on is WM6 ANTC V2.0 but it shows wm5 on my ppc i really confused here please help
thanks in advance
blue
plz anybody
plzzzzzzzzz any body can help anyone can solve the problem
thanks
Try going back to the stock tmobile ROM (check the link in my sig for the link to the ROM). It's a WM5 ROM that contains the IPL, SPL, Radio, and OS. After you load that, you should be able to load anything. Good luck and happy new year.
I'm Having trouble upgrading the rom in my T - Mobile Wing.
I've read the forum and downloaded everything there is to download...
I tryed a few roms none of it seems to work for me ...
at the end of spl i get an error and phone is bricked and i have to run RUU to unbrick. can some one guide me walk me tru it step by step or maybe just list a few things that might me going wrong ...
if this helps my
IPL is 4.10.0002
SPL is 4.10.0000
Thanks in advance
anyone that can help me tru this will be thanked generously.
Send the Phone back to T-Mobile. just edit the pagepool 4mb on new phone. done.
hi there i have original rom for wing if u want contact me
contact me on [email protected]
Hello! I want to upgrade my Qtek 9100 with the latest ROM version. I have the official Qtek ROM 2.17.7.2 WWE, IPL/SPL 2.17, Radio 02.07.10 and AKU 2.0. Where can I find the latest official Qtek ROM?
How does the IPL/SPL influence 9100's performance or stability? I have found IPL/SPL version 3.08. Can I install IPL/SPL 3.08 separately from ROM version? Can I damage the Qtek?
And the most important thing: I want the latest official AKU installed on my Qtek. Can it be installed separately from ROM? Where can I find it? If it can't be installed separately, please help me to find the latest official Qtek 9100 ROM packed with the latest official AKU version.
One more question: Is the radio version a good one? Is there a better version? Can this be installed separately?
I think that is best for PDA that AKU, IPL/SPL and radio to be installed with ROM, not separately. Is that true?
Thank you very much!
Look at you men!!!
are you insane?
Jajajaj read men!
but as I am very good person I will tell you where you need to read ok?
First!!!!
Where can I find the latest official Qtek ROM?
Click to expand...
Click to collapse
So i think you were found the 3.08 is good but is not recomended yet.... ok.
Second!!!!
How does the IPL/SPL influence 9100's performance or stability?
Click to expand...
Click to collapse
It don't influence in nothing my men! nothing... why... because AKU (Actualization Kit Update) was just for wm5 ok? its like you wanna see if XP SP3 works well with your new Windows Vista Ultimate edition...
But you need to read the tutorial first to know how to downgrade first to1.01 then unlock, then upgrade to 2.XX not 3.08 ok?, then to a new WM6.1 rom ok...
Third!!!!
I have found IPL/SPL version 3.08. Can I install IPL/SPL 3.08 separately from ROM version?
Click to expand...
Click to collapse
Ok you found the 3.08... yes you can but is more important ask... what chipset do you have? G3 or G4? please provide us with this info first... i saw you have 2.12. bal bla bla so is a G3 but confirm cause some people said I have IPL SPL 2.17 and NOT they have 2.17.0001 (G4) and they has a bricked phone... so the only way to upgrade or change the IPL or SPL is flashing an Original ROM maded by your carrier and for your chipset ok? well... so the answer for this question is NO men!
Fourth!!!!
Can I damage the Qtek?
Click to expand...
Click to collapse
Yes the IPL and SPL changing system is the problem for all thats why people bricks their phones so please dont use it cause it wont lets you perform speed or something ok? AKU's was History Now! the world of WinMobile rules the 6.1 with .Net compact 3.5
Fifth!!!!
Can it be installed separately from ROM? Where can I find it? If it can't be installed separately, please help me to find the latest official Qtek 9100 ROM packed with the latest official AKU version.
Click to expand...
Click to collapse
No is not the most impoprtant question is the same but all in one hahahaha
No you cant upgrade separately... aku is history so dont try to upgrade stay in Aku 2.XX after your unlock process ofcourse and read a lot men you need to read a lot!
Oh sorry i forget something... you have the last the 3.08 AKU 3 (3.08)
The AKU2 comes with A2DP stereo sound bluetooth via Headsets
The AKU3 comes with A2DP and Direct Push tecnologies... so... they never works in WM6 or 6.1 why? cause it already have it by default....
Hope it answers all your question and please men I cant tell you where to go if goes to G3 tutorial for unlock or G4 hardSPL cause you dont have read to fill your signature with your info so...
Be cool men and Good luck we are here to support!!!!
No, I haven't found 3.08 ROM. It's only IPL/SPL 3.08. I have found T-Mobile 2.26 and I don't know if it's good or not. Does T-Mobile ROM differs from Qtek ROM? Thanks!
So...
So... what do you mean with this...
I have found IPL/SPL version 3.08. Can I install IPL/SPL 3.08 separately from ROM version?
Click to expand...
Click to collapse
The IPL and SPL cant be found separately men!
where is the one you found post the link please...
I have found T-Mobile 2.26 and I don't know if it's good or not. Does T-Mobile ROM differs from Qtek ROM?
Click to expand...
Click to collapse
Men!!!
With the Original ROM T-mobile 2.26 you will have the 2.26 IPL and SPL...
And with the Original ROM T-mobile 3.08 you will have the 3.08 IPL and SPL...
This components arent separately.... Never!
It diffiers from Qtek in many things like... some apps... Splash screens.... Configurations... and many little things.
Here all recomends to Use the T-mobile Rom 2.26 to Upgrade after the unlock process cause is the best Original BASE rom ( is the same but is highly recomended that after unlocks the CID and SIM use the IPL and SPL 2.26)
I have found the 3.08 IPL/SPL in the unlocking thread...I'l give you the link latter because I am in a hurry.
If I want to flash the T-mobile 2.26 over Qtek's 2.17, I have to go back to 1.05 ROM and CID unlock, or I have to install the 2.26 over 2.17?
How about with battery life in T-Mobile 2.26 when using wireless and bluetooth? When using only GSM, the battery drains fast?
Thank you very much!
I think here...
Here is your link... so
http://forum.xda-developers.com/showthread.php?t=311027
Whatever...
You are on qteks original 2.17 is it truth?
So... first of all downgrade to 1.05 (you dont need to upgrade to SPL 2.26)and do the unlocking process, if everything is ok...
second... upgrade to 2.26... then your favorite Coocked Rom by whoever you want ok?
third... everytime you want to upgrade or change your rom is highly recomended to flash first an Original ROM qtek 2.17... Tmobile 2.26 or 3.08 then your new Rom coocked ok?
You can change for every Original to Custom and viceversa now, and you dont need to downgrade again to 1.XX again cause its unlocked forever.
Hope it respeonds your doubts... The issue on many ROMs for this kind of things dont be the same on Original ROMS (I didn see issues on originals, well maybe the speed and performance), and many chefs recomends Three steps to upgrade if you experiments this batt drain issue:
1.-Before the NEW rom, Downgrade to any original
2.-Be sure your Batt is FULL I mean (100%)
3.-Let your device synchronize fully when it starts after an upgrade ( I mean dont unplug at the end of upgrade procedure)
Ohhhhhhhhhhhhh
God damn ****!!!!!
Men wait a minute you are G4!!!!!!!!!!!!!
You dont need to do this unlocking proces ok?
it will be brick your device
Your device is G4!!!!!!!!!!
You need to go to G4 forum and perform the HardSPL Patch ask there....
Well my prays was listening hahahahaha
Because you write your info on your signature we avoid to brick your device
forget all this ****n thread and start again asking on G4 forum please god damn!!!!!!!!!!!!!!
I have a G3 device and I have CID unlocked my phone before, when I upgraded from Button 1.5.4.2 to Qtek 2.17 (I have followed the steps in the upgrading "manual" from here http://forum.xda-developers.com/showthread.php?t=285435). So, I think I don't need to go back to 1.05, unlock and then install 2.26. All I have to do is simply to upgrade T-Mobile 2.26 over Qtek 2.17 with RUU utility.
Now, I don't know how T-mobile 2.26 will influence my phone's settings regarding that I live in Romania and I am a Cosmote mobile network user, not T-Mobile. I have seen on a web site that you can not connect to Wi-Fi hot-spot if the hot-spot isn't from T-Mobile. Is T-Mobile ROM 2.26 restricting the phone's settings and the choice to freely connect to wireless hotspot or Cosmote GPRS and MMS, Orange EDGE and MMS. Can I add new SMS, MMS or GPRS/EDGE settings? Or they force you to use their settings and data connections?
Thank you very much!
So xtrange
The IPL and SPL you have on your signature are for a G4.
No it is recognized by the SIM Card... i mean the sms and cellphone conections but mms gprs and other things yes... you need the configurations separately...
So T-Mobile ROM will work OK with Cosmote network... But does T-Mobile ROM restricts any of the device's function? Can I use all it's function freely (wi-fi, bluetooth, irda -I'm asking you this because I have played with an HTC Prophet from T-Mobile that wasn't wi-fi enabled)? Can I install all kind of programs? Do you know anything about battery life?
In a previous post, you said that after CID Unlock it is recomended to use IPL/SPL 2.26. Can you, please, tell me why?
About G3/G4 chip: when I have verified chip version on SYSTEM-DEVICE INFO it showed M-System G3. Now It only show M-System without the G3. Don't know why...
Thank you very much for your help!
Andrei__1 said:
So T-Mobile ROM will work OK with Cosmote network... But does T-Mobile ROM restricts any of the device's function? Can I use all it's function freely (wi-fi, bluetooth, irda -I'm asking you this because I have played with an HTC Prophet from T-Mobile that wasn't wi-fi enabled)? Can I install all kind of programs? Do you know anything about battery life?
In a previous post, you said that after CID Unlock it is recomended to use IPL/SPL 2.26. Can you, please, tell me why?
About G3/G4 chip: when I have verified chip version on SYSTEM-DEVICE INFO it showed M-System G3. Now It only show M-System without the G3. Don't know why...
Thank you very much for your help!
Click to expand...
Click to collapse
IPL/SPL: 2.17.0000
These are G3 Bootloaders,if it was 2.17.0001,then it wud have been a G4,therefore,your device is a G3 phone.nothing to worry about.
Now,you can flash any official roms to it as all the officiall roms like Qtek,t-mobile Cingular or O2 are basically the same roms provided by the Microsoft,they have the same Base Roms,but just all the vendors add up their own stuff to it.Like Splash screens,programs/applications and network/gprs settings.Apart from these ,there is no major difference in any Official rom from all the vendors.
Yes! Bootloaders(IPL/SPL)/Radio Roms can be flashed separately or within by a Rom flash.
Downgrading to IPL/SPL 1.xx is only needed if you want to CID unlock the phone for upgrading to any wm6 or wm6.1 rom,as no official wm6 rom is provided by any vendor.So its only possible to upgrade to wm6 or 6.1 latest rom through custom build roms and for that its required to get the phone CID unlocked
After getting the phone CID unlocked,its prefered to upgrade to T-mobile 2.26 coz its a proven stable base rom,but you can also upgrade to IPL/SPL 2.xx,required for upgrading to wm6 by flashing any other official Aku (Adaptation Kit Update) 2.xx rom.
Upgrading to IPL/SPL 3.08 will just give you a slightly better boot up timings,which is hardly noticeable and nothing else,so if you are at 2.xx,its more preferred.IPL/SPL 3.08 sometimes creates problems afterwards if you have to downgrade.
Its also not necessary to reflash back to official ro each time before flashing a new rom,but only recommended,to clear the Extended_Rom corruption and have a clean base,I have never reflashed any official rom before flashing any new rom,but then thats me!
Thanks men!!!
Im getting worried but... why does the Bootloader Shows the four zeros... on my device it never shows the zeros.
In 2.17.0000
I think he use the WST isnt it? not seing the bootloaders...
I have finally installed T-Mobile 3.08. It has interesting features, but I don't like the dialing pad and that when I start Internet Explorer, the phone asks if I want to connect to T-Mobile GPRS. I'm 60% with the Qtek 2.27 and 40% with T-Mobile 3.08. I'll wait to see the battery life compared with Qtek ROM and the power consumption when using wireless. I'll make a decision in weekend.
Oh, forgot to ask about WM6. Will the phone be faster or slower? What are the main differences from WM5? Is there an official WM6 ROM?
Thank you very much!
It seems that qtek's wi-fi is connecting continously, without establishing a connection. It show "connecting" all the time.
Today I have installed Qtek 2.17 ROM. I like it more than T-Mobile 3.08.
Dear all,
I have a HTC Charmer (t-mobile, German) and I am trying to change the ROM to an english one. I already managed to unlock the phone with Lokiwiz 3.0a but I didn't have any success at all trying to get a WiMo 5 ROM. Does anyone know where can I get one? I found one in t-mobile website (uk) but when I'm installing it, it says "invalid vendor ID".
I read in other threads that Prophet ROM may work.
http : //forum.xda-developers.com/archive/index.php/t-343356.html
However, I'm not sure if it's true and I'm afraid of obtaining a cool brick as an outcome.
Many thanks,
N
Next time just read and if you ask give more info. Which SPL and IPL do you have?
And to flash the English Aku3 to a German phone you need the NoID ruu. You can get it here: http://forum.xda-developers.com/attachment.php?attachmentid=42657&d=1183226200
If your SPL is 2 or higher I would recommend you to use an English WM 6 6.1 or 6.5 instead as they can be found in Charmer Mobile 6 subforum.
Before you flash WM6 or higher please read how it works. (The CID unlock part of the one howto isn't needed to be done!!)
Hope that helps.
And next time please read first and ask then!!!
have down grade my MDA compact 2 to WM 5 RUU_Charmer_38221_382116_026921_TMO_UK_WWE_Ship rom supplide by T-mobile and tried flashing it to 6.5 but it didnot work, now tried ur ROM to flash it to wm 6.1 but it get stuck at
while showing the following information;
IPL: 3.08.001
SPL: 3.08.001
GSM ; 02.60.21
OS : 6.1.0.0
Can you tell me what might have gone wrong.
Can you please help me.
Can you suggested any Cooked ROM which can i flash on to my charmer which is on WM2005 at present.
unforgetable0708 said:
have down grade my MDA compact 2 to WM 5 RUU_Charmer_38221_382116_026921_TMO_UK_WWE_Ship rom supplide by T-mobile and tried flashing it to 6.5 but it didnot work, now tried ur ROM to flash it to wm 6.1 but it get stuck at
while showing the following information;
IPL: 3.08.001
SPL: 3.08.001
GSM ; 02.60.21
OS : 6.1.0.0
Can you tell me what might have gone wrong.
Can you please help me.
Can you suggested any Cooked ROM which can i flash on to my charmer which is on WM2005 at present.
Click to expand...
Click to collapse
Hi!
You need 2.06 IPL,SPL to flash cooked ROMs.Downgrade is risky,I did it,but it needs some knowledge.
Before do anything with your Charmer,make a Goldcard,it can be useful!!!
http://forum.xda-developers.com/showpost.php?p=5612551&postcount=38
BR
Scootie