Need Some Help With T - Mobile Wing Rom Upgrading.. - Wing, P4350 General

I'm Having trouble upgrading the rom in my T - Mobile Wing.
I've read the forum and downloaded everything there is to download...
I tryed a few roms none of it seems to work for me ...
at the end of spl i get an error and phone is bricked and i have to run RUU to unbrick. can some one guide me walk me tru it step by step or maybe just list a few things that might me going wrong ...
if this helps my
IPL is 4.10.0002
SPL is 4.10.0000
Thanks in advance
anyone that can help me tru this will be thanked generously.

Send the Phone back to T-Mobile. just edit the pagepool 4mb on new phone. done.

hi there i have original rom for wing if u want contact me
contact me on [email protected]

Related

Please Help!!!! I will dontate!!

Hello xda!!
I am very much a newbie and now I find myself with a brick of a phone. I wanted to put a new rom with the touch flo on it but it did not work. I upgraded to the SPL 3.08 I think that the right number and then I try to download the diamond 2.0. However the ROM did DL correctly but when I wne to configure it it said windows.autoconfig not found on my 8125 wtf is that all about. I own a cingular 8125. I dont know where to start now. All I want is the touch flow rom but how and where do I start. I even tried to flash it back to the HTC OEM rom but I could not do it. Please anyone?? Help por favor....
Regards,
David
I would try to help you, but you will need to type (give) more information that those that I give/ask you. I'll need to know
- Your phone, G3/G4, IPL/SPL/OS/Radio
- The OS you flash page, instructions followed
- Your PC OS used
Read the Wiki (on top of this page, XDA-Wiki) on Wizard section on how to un-brick your phone.
I have a g3 type but I dont have the phone with me. I switched my sim to my treo for now. the OS ROM I tried to flash it with was Diamond 2.0 my SPL 3.08. Any help would be greatful
As I said in my previous post, you'll need to give me more info. Example of more info http://forum.xda-developers.com/showthread.php?t=339014
UPDATE:
How do downgrade http://forum.xda-developers.com/showthread.php?t=335222
I have a Cingular 8125 and the ROM I currently have is a Wizard Love/ AKU 2.3
When I turn my phone on it reads this
IPL 3.08
SPL 3.08
GSM 2.25.11
OS. 2.26.10.2
This is what I wanted to do. I wanted to put WM6 with the Touchflo on it but now I am stuck with this ROM I know nothing about. When I try to flash it back to the Cingular ROM is will not update I need a new NBF file? If you can help I would be greatly thankful and would donate to you.
Cheers,
David

please i need your help

i tried to update my wm5 to wm6 rc1 to my wiza200 (t mobile)
i followed all instructions as in Rc1 thread but this is what happened
my phone unlocked
cid unlocked
i upgrade the IPL/SPL to 3.08 both
but when try to install wm6 rc1 or any other wm6 it still give me the erorr 302
i tried to downgrade to IPL/SPL 2.26 but i failed all the times
please help me i lost every thing
please hellllp me i want either to install the WM6 or go back to tmobile wm5
note the only os can be installed on is WM6 ANTC V2.0 but it shows wm5 on my ppc i really confused here please help
thanks in advance
blue
plz anybody
plzzzzzzzzz any body can help anyone can solve the problem
thanks
Try going back to the stock tmobile ROM (check the link in my sig for the link to the ROM). It's a WM5 ROM that contains the IPL, SPL, Radio, and OS. After you load that, you should be able to load anything. Good luck and happy new year.

Can any one help me ?O2 Hang on QteK

Any one can help me ?
I have problem with HTC Prophet O2 XDA hang on Startup.
Screen Show only QteK
IPL 2.15.0001
SPL 2.20.0001
GSM 02.47.21
OS 2.20.7.34
Show only this on Screen.
I do ROM Update & Recovery But still same .
I need Urgent help.Any one have IDEA what to do ?
JHON_DREAM.
You need original official ROM to overcome the boot screen.
Do you have it?
Then try with that and post the reslt.
JHON_DREAM said:
Any one can help me ?
I have problem with HTC Prophet O2 XDA hang on Startup.
Screen Show only QteK
IPL 2.15.0001
SPL 2.20.0001
GSM 02.47.21
OS 2.20.7.34
Show only this on Screen.
I do ROM Update & Recovery But still same .
I need Urgent help.Any one have IDEA what to do ?
JHON_DREAM.
Click to expand...
Click to collapse
Read the Upgrade Guide again and look for the Recovery Steps follow that and your problem will be Fixed it worked for me if you cant find the files you need NO_Vendor WM 5 Rom let me know al upload and post the link here for you ok
read here
read carefully pls
http://wiki.xda-developers.com/index.php?pagename=Prophet_recovery
shipped ROMS for recovery <preferrably ROMs with NVID or NovenderID
http://wiki.xda-developers.com/index.php?pagename=Prophet_ROMs
how to use shipped ROMS:
http://wiki.xda-developers.com/index.php?pagename=PRO_ROM_BASIC
then if you have recoverd your device and want to flash a new ROM you may do so by following this steps:
http://forum.xda-developers.com/showthread.php?t=350033
or here:
http://forum.xda-developers.com/showthread.php?t=310452
hope this helps

HELP required urgently !!!

Hello anyone,
i just have done some bull****, i guess...
yesterday evening i copyed "EnterBootloader.exe" via USB to my VPA compact 4 & run it from over there. meanwhile this step i was connected to USB (maybe the fault [?])! the SIM-card was inside the device, but no SD-Card.
next a whitescreen popped up and i waited 1.5min... i couldn't wait any longer, so i pressed on-/off-button...
nothing happened if i press the on-/off-button again, nothing happens! no LED is blinking any longer, even i connect it to 230V.
my situatin is really uncomfortable to me - please help me to get back the manufacturers settings!
thx in advise
Beli
why did you copy "EnterBootloader.exe" to your device and run it? What where you trying to do?
my thought was to find out, which SPL my device is...
so far for now i'm in the bootloader screen (RGB-colors) & able to connect to USB...
i guess i need a original RUU & ROM for Vodafone GER. if i'm wrong please correct and show me howto install any other ROM via any RUU...
my bootloader offers me this:
IPL: 1.09.0001
SPL: 1.09.0001
greetz
Beli
Belisario said:
my thought was to find out, which SPL my device is...
so far for now i'm in the bootloader screen (RGB-colors) & able to connect to USB...
i guess i need a original RUU & ROM for Vodafone GER. if i'm wrong please correct and show me howto install any other ROM via any RUU...
my bootloader offers me this:
IPL: 1.09.0001
SPL: 1.09.0001
greetz
Beli
Click to expand...
Click to collapse
You can NOT flash custom ROM's. Your SPL is too low. Try flashign the official ROM for your providor.
ace10134 said:
You can NOT flash custom ROM's. Your SPL is too low. Try flashign the official ROM for your providor.
Click to expand...
Click to collapse
It was not my intention to flash any ROM...
Thanks for the advice, but for now i'm unable to flash any provider ROM, because i don't have any!
...i guess it should be a GERMAN vodafone ROM, because that was the last runnig stable.
now a few questions, which the WIKI was unable to answer:
where to get this unknown ROM?
over here?
how to install (guide/tut would be nice...)?
what about the two different "goldcard"-methods?
Elf-Goldcard
Herald-Goldcard
what about the so-called "Unbricker"?
over here
thewingster.com is the best place. check it out
Brandonii said:
thewingster.com is the best place. check it out
Click to expand...
Click to collapse
Well it's not going to solve his problem.
I wish my website could fix his phone in an instant, but it can't He'll have to do the Goldcard, most likely
So, if the Goldcard is the best solution for my Herald, i have to try it... otherwise there is no way out.
BUT:
The website "hides" a link to the official ROM of T-Mobile Wing (US).
I've modified the link, but i don't know if i'm at the right place over HERE.
Maybe i should try it, but they need the so-called IMEI... i don't want to offer it to them, only if it would solve my problem!
As far as i know, i need to download the official ROM of Vodafone Germany with SPL-version 1.09.
If any of you has this ROM or something that could help my to find it, please post a "hint" for me where to get
Thanks in advance
Beli

Issue with my HTC Touch P3450 in Lock screen

Hi Guys,
I have this issue with my Touch P3450...while entering password for unlocking the phone...it automatically backspaces evey digit i enter to unlock the phone...due to which i am unable to use it...any body facing the same issue and any soutions for the same...have tried removing all the hardware keys to check if any thing wrong with hardware...but the same issue...have been using the phone frm last 2 yrs without any issues.... Any solutions...
Thanks in advance...
Sent from my HTC Desire S using xda premium
Very strange, try mobiler to input from desktop... But maybe it won't connect in locked mode.
Sounds like your digitizer may be damaged to me. Try my mobiler as suggested above. But I think he it right, it may not work when locked.
Sent from my Desire HD using Tapatalk
i need help on HTC-3450
i have download onyx 6.0 very and try to install it. every time it just goes to 2% and then stop n says image maybe corrupted. check your update rom utility.
even from this forum i have downloaded cid patch, and hardspl still when i go to update same error comes,
so if plz can some one guide me step by step what i should really do to update this rom on my htc p-3450 n i have brought this from uae so i dnt think its sim lock or something but plz do guide me as soon thx in advance
If you tried to flash rom before you unlocked the cid, then you are in trouble. Does your device boot normally? If yes use this tool http://forum.xda-developers.com/showthread.php?t=418892 to let us know more about it.
CID is unlocked and am using a custom rom...will sure check the link and give it a try....thanks for the info....
Sent from my HTC Desire S using xda premium
Great to hear
Could you please explain how you solved your problem so others can enjoy too ?
P's: the link was intended for madicoot
thx for the help
ok like you gave the link i followed that link, with that i got my device info, after that now what i have to do, like you said i have to unlock my cid , in that no file is include like cid unlock or something, or do i have to run that onyx 6.0 directly
Post your device info here so we can get an idea
my device info
HTC Touch device information - by dsixda
Touch version : Elf
Device ID : ELF010000
CID : HTC__J15
IPL : 1.17.0002
SPL : 1.17.0000
ROM Version : 1.17.415.3
ExtROM Version : 1.17.415.103
Operator Version: None
AKU Version : 0.2.3
Page Pool (MB) : 8
RAM Size (MB) : 64
ROM Size (MB) : 128
Model No. : ELF0300
Part Number : 99HDM058-00
SIM Unlock Code : 35219311
MCC+MNC :
ok this is my device info, now what ahead i have to do, so i can install
onyx_6_release14 but still when i run custom ruu, it goes to 2 % n says image corrupt n installation stops. plz help thx in advance
I asked you to post info so we can tell you what to do next... And obviously you're Cid locked, trying to install rom can brick your device! Can you boot normally? if not your only option is to find your original stock rom .
hi tito
yeah my phone is HTC P-3450
n other info which i got from that device info file i posted in the earlier post, yes my phone is still booting in normal mode, it just that when i try to install the onyx it gives me error of image corrupt n then it reboot n start in normal window. thx for guiding me
Ok, go to this thread and follow instructions for cid unlock and Rom flashing: http://forum.xda-developers.com/showthread.php?t=1402104&page=2 especially from post 12.
thx for the help
hi bro thanks for helping me
just one question is that i download this ELF_USPL_1.17.0000 ver as u give me the link. there are few others ver also, so which u prefer i used this one first n then in future i can upgrade others.
and one another question is that before running this patch of uspl does i have to put onyx 6.0 in the same folder of this uspl or first i have to install this verson only n it has its customer rom
then i can update to onyx 6.0
thx in advance
plz guide me for this. as i dnt want to mess my mobile before i get ur proper guide lines thx once again.
I think you should read at least 10 pages so you feel comfortable with uspl procedure, last time I did it was 2 years ago... After you get 2.28 or 3.10 you can flash hspl and only then flash onyx.
hi bro
hi tito bro thanks for your guide lines i really appreciate for ur all the help you have given me, yeaterday first i install the uspl 1.17.0000 n then it went to update rom utility itself n then i could see it was showing version spl 1.17.0001 something n ipl 1.17.0002. then i see it reboot n went like the windows i had same one. then i flash the onyx n it took n install it completely. but i still want to know that can i still update to like 2.28 spl buz i have read ur comment n then i went to few pages of those n i see that most are saying to use 2.26 n then update to 2.28 spl n 2.26 ipl to get better speed and to have fast application run, so now can i do that spl 2.28 n ipl 2.26 update ?
and after i do that update does i have to flash onyx 6.0 again ?
thanks for your time
You are running too fast mate, you have to get higher SPL then upgrade to corresponding Hspl and only then install Onyx. Read the FAQ in Onyx thread!
Ps: you can directly upgrade to 2.28 SPL
hi
hi bro
well as u said i upgrade the spl to 2.28 but i dnt know still ipl is showing 1.17.0002 only, does that i have to install in another way, buz last time when i install spl 1.17.000 after update i see the ipl was showing 1.17.0002 but now when i update it to 2.28 spl. still ipl is showing the older ver only n not showing 2.27, or does its like i have to copy that .nbh file to that rom utility n replace with the one inside have n then update it?
n another problem is that b4 doing spl first time i forgot to take the backup of my original rom, so now i am afraid that if i do anything wrong maybe phone will stop completely working.
When using ruu make sure there's only one nbh, and as for backup, well it's too late to worry, think positive
thx
Hi bro
thx for your guide lines, ok now today i have updated ipl and now the version is showing
IPL : 2.27.0002
SPL : 2.28.0000
so now what next time i should do.
ok but one thing i want to tell u is that the windows my mobile boot is onyx only,
as i dint had back i dint took risk of formating n start to install all from first, so i am just doing updating as u guiding, so now as the ipl & spl is update, what step i have to do, pls let me know. so i will go n read n then take ur more guide lines to move ahead
thx alot in advance to helping me

Categories

Resources