Hello, i have a problem with my HTC Trinity, since a few days, i can't connect to my network (Orange), but i can connect to other networks with an other sim (because my trinity is unlocked).
I have found that my IMEI was altered, i think i can put the imei number here because is not a really IMEI: 359426000000007, but on the back of my Trinity, only the 7 last numbers are differents. How i can restore the good IMEI ? And why the IMEI was altered like this ?
I did some research on how change this number but i can't found anything about this version of HTC. Please help me i can't use the telephone fonction in my principal network.
Sorry for my funny english but i consider this forum like the best in the domain.
I hope the trinity is already of actuality. Thank You.
help
I did a lot of research but i don't found anything, I think it's possible with Mtty, but i don't know how to use it. Please, can you explain me the way to do this (if some one know how we do it), i can't use the Gsm part of my trinity
I don't want to change my operator, thank you.
I have found a solution: my nokia 3210
If you have a solution please send me a message.
Thank You for "all" =)
Your emei is not self-altered
What did you do on the device ? ( flashing, installing,... )
Which is the radio version ?
Thank you for your response, i have actually a DOPOD official WM6.
I have tested to downgrade to a WM6 FAMAN and after a DOPOD official WM6 and WM5, but the IMEI don't change (only the last number change). I was return after to the WM6 dopod.
Before, I was tested many other ROM, and the problem is i don't know when exactly the changement was gone because i was'nt in my country for 2 month, i have used an other operator and the ROM i was tested was upgraded during these two months was : Faman & Schap's (french rom) and the FInixNOver, i had no problem before come back in france...
(I had tested also to upgrade the ROM Radio, but nothing too.)
I have read that we have to upgrade to a backup, but i have no backup, i have tested to using a tty program but i'm not good in this domain.
Thank you very much is somebody know a solution... (and sorry for english ^^)
imei problem
Hi,
The first 8 digits in the EMEI number are make and software version.
The other digits are problably overwritten by a software change. (unlock, flash, upgrade, etc)
Try EMEI CHANGER in Google
I already did this kind of search, but nothing for trinity.
what is your radio firmware version now?
I'm now in a 1.30 Olipro radio rom, i had before this recent upgrade the 1.50.08.11
Hi,
You can try http://gsmhosting.com/vbb/archive/index.php/t-341121.html
but returning to your previous radio might do the trick.
Don't work with trinity... changing of radio don't change anything.
I think the only option is get back to HTC in your country than doing too many resettings which make things worst.... I got mine "hang", after too many setting and reflashing..... ;(
Gd Luck.
this solution is too easy, i'm not this kind of person. Thanks anyway, i will test an other solution.
Related
hello, i've got problem with network or gsm modul or also with soft,
i have updateg radio from 1.12.10 to 1.13.10 because i thought that earlier ver had a bug and my phone lost net due this. With new radio rom it has lost net 3 times during one day yet. Is there someone who knows how to resolve this problem it's become stressfull for me... grrrr
<edit>
i found somethig more, after it has lost net it looks like fine and you can't see any diferences (there is still some bars indicates network range, led is blinking) but you can't perform any connections... phone also is not able to answer call
i'am traying to find when it hapen or after what but help me please
<edited>
BR
Rafal
Please tell us your make of wizard and the rom, maybe a whole rom upgrade will solve your problems.
hi!,
my wizard it's a mda from era (polish t mobile)
ver 1.6.2.8 PLK
date 11/1/05
radio 1.13.10
protocol 4.0.13.24
extend 1.6.2.116
and one thing more, after ended gprs connection i can see restart of gsm, bars are blinking and it log on to net again without requesting pin code, but the problem is i can't make call and answer after soft reset everything backs good
Can suggest using a more up to date rom, not sure if there is a newer PLK rom, but what about a WWE rom?
ok i'll try this but let me know if i can find it on XDA ftp? and which one is it
i have got this phone 2 weeks ago and i still try to lern sth new about it
merci beacoup for Your help
Try the polish t-mobile web site first to see if they have any updated plk roms.
If not most mda users here are using qtek rom ftp://xda:[email protected]_2170702_21707102_20710_QTEK_WWE_Ship.exe
Download above rom, user name xda password xda
Backup all important information as everything will be lost.
Unlock device - super cid is best get unlocker from here and follow instructions http://forum.xda-developers.com/viewtopic.php?t=33796
After unlocking flash device with above rom via activesync
Hope that helps
The behaviour of disconnecting from the network and reconnecting without asking for PIN sounds familiar to me.
I think it is caused by bad connections to the SIM.
I have a dual sim and afterhaving modified it too much i my sims did not make good contact. It occurred more than once that my phone switched sims without me having 'said'to do so (switchin sims is done by powering off/on radio wich looks a bit the same to the dual sim adapter as fawlty contacts).
Advice; clean the contacts of both sim and phone before you upgrade (although I can recommend an upgrade to aku 2 roms)
i had upgrated to this one - prodigy......WWE_ship from xda ftp and now i'm waiting for problems maybe there will be no problems ...
big thanks to Those of You that answer my questions ... thx
The programmers of www.pdamobiz.com in Thailand have successfully unlocked the CID for HTC Prophet SPL 2.xx. More information is available at:
http://en.pdamobiz.com/en/forum/forum_posts.asp?TID=437&PN=1&TPN=1
Wow, that's a very good news indeed
Now I just have to find an Orange France M600 rom to test if it work
I'll test with the Jamin one also...
If someone can upload the M600 french rom, i would be very grateful, thanks!!
Does anyone succefully download the unlock program? the connexion is very very slow on their server (I'm downloading in Bytes/sec :shock: instead MBytes)...
If yes, it would be nice to upload it on the ftp server, thanks!!
cedrick said:
Does anyone succefully download the unlock program? the connexion is very very slow on their server (I'm downloading in Bytes/sec :shock: instead MBytes)...
If yes, it would be nice to upload it on the ftp server, thanks!!
Click to expand...
Click to collapse
Thanks to someone that uploaded the file. It's here:
ftp://xda:[email protected]/Prophet/pdamobiz.com_downgrade_and_unlockcid.rar
Actually it was there ftp://xda:[email protected]/Uploads/Prophet/pdamobiz.com_downgrade_and_unlockcid.rar :wink:
Not sure what happenned to the Prophet folder on the ftp, I though there were more files inside yesterday :roll:
Thanks a lot anyway
Im probably missing something here, but isnt it enough just using Machinagod great No ID crack when upgrading a ROM?
Just copy it to the nbf files and run it, works like a charm.
So, what is the difference with this application?
I don't know the app you're talking about, but we're talking here about downgrading, not upgrading a rom...
Moreover, does your application remove CID on prophet with SPL 2.xx ?
well, should have tested that before speaking...
doesn't work for me, once run the downgrading program, I soft reset but the device stay blocked on splah and I can't connect back to active sync to run the unlock program... too bad, that seemed to be a good way to downgrade rom :?
...great work! just used it on my qtek s200 that i've accidently flashed with the latest o2 germany rom without cid-unlocking before. now i can really put any rom on it
thanks and cheers, lutz
did i work? what happen when you soft reset after running the downgrade tool?
thx !
everything worked as it should, no idea why it didn't work for you...
cheers, lutz
Ok thanks,
BTW, ignore my PM didn't though you'd reply so fast :wink:
do a hardreset and pray that you get it connected to active sync, buddy...
as said above, it worked exactly as they've said it will. i have no idea what went wrong for you so my help is poor...
cheers, lutz
Actually I tried various time... I'm on the last Dopod rom, i started as said, then when I reboot, the device is stuck on dopod splash screen...
So I have to go into the boot loader in order to reflash the dopod rom I have... at least I can do that and keep my S200 working
Maybe this doesn't work with the last Dopod rom, but at least it worked for others
we need a Thai to Eng. translation to understand the problem
Unfortunately my device can not continue with second step. After I softreset it; the device freezes. Neither hardresetting, nor putting in bootloader and continuing with hard or soft reset helps. I reflashed the latest Dopod ROM and continued to use it.
I can not read Thai language but from the original discussion (not english but in Thai language) I see that a number of people are having the same problem. I also understand that the suggested solution works for some others.
The english version is not a full translation of the original discussion; translation of a lot of answers are missing.
We need the help of our Thai friends to understand what is going on.
I guess that it works on certain rom version, if you've the dopod one like I had, then it confirm that this method is useless with the last dopod rom...
But we have confirmation it work with other roms... maybe it's not really working on SPL 2... roms :?
I took a look on the Thai version, now it's clear that it doesn't work on the last dopod rom SPL 2.15 !!!!!!!
cedrick - Sorry you have failed to CID-unlock your Prophet and congratulations to lutzh that has succeeded.
From the Thai version of this utility, many people could unlock their devices but some did fail to do that. Not sure only the SPL 2.15 or not that couldn't be unlocked but at least 2 people claimed that their devices are SPL 2.15.
The website programmers are still trying to investigate and find the solution to help people who failed. Please hang on. Good luck!
@cedrick:
Yeah my SPL is 2.15
@Khuanchai:
Thank you for information. Hope to hear better news.
Cheers.
No problems about the failure, that's already nice to see tools like that that can help a bunch of people.
Now I hope it will also work on the dopod rom as I really liked it and I would like to update my prophet with this rom. But I prefer to wait until there's a way to get back to whatever rom :wink:
I have just recently bought a M3100 (second hand) and am having some problems receiving incoming calls.
Things I have done:
1. The phone was locked to Orange, so I ran the superb tools on this site to SIM & CID unlock the phone, inserted my T-Mobile SIM and all seemed OK.
The phone working for about a day on incoming and out going calls fine, I then started to add various software I have used in the past (magic button, pocket infomant, ewallet, sprite backup etc). I then discovered I could not get any incoming calls, but could make outgoing calls OK.
2. I then decided to update the ROM to the latest Orange ROM from the orange website (not knowing if the previous owner of the phone had modified something). This came up with an error and hence used Extract NBH, Customer RUU as per previos posts on this site which all seemed to work OK.
Just for information when I orginally tried to upgrade the ROM, the boot screen said SPL 1.4 olipro ?
3. Even with this new ROM (phone sill unlocked), the incoming calls don't seem to work very often.
I am a newbie to all this, so is this problem due to the radio software, or have I just got a faulty phone ?
Thanks.
test67 said:
I have just recently bought a M3100 (second hand) and am having some problems receiving incoming calls.
Things I have done:
1. The phone was locked to Orange, so I ran the superb tools on this site to SIM & CID unlock the phone, inserted my T-Mobile SIM and all seemed OK.
The phone working for about a day on incoming and out going calls fine, I then started to add various software I have used in the past (magic button, pocket infomant, ewallet, sprite backup etc). I then discovered I could not get any incoming calls, but could make outgoing calls OK.
2. I then decided to update the ROM to the latest Orange ROM from the orange website (not knowing if the previous owner of the phone had modified something). This came up with an error and hence used Extract NBH, Customer RUU as per previos posts on this site which all seemed to work OK.
Just for information when I orginally tried to upgrade the ROM, the boot screen said SPL 1.4 olipro ?
3. Even with this new ROM (phone sill unlocked), the incoming calls don't seem to work very often.
I am a newbie to all this, so is this problem due to the radio software, or have I just got a faulty phone ?
Thanks.
Click to expand...
Click to collapse
You have read the mrvanx guide I take it, if not click it on my signature. Have you installed the latest hard SPl v7? and what radio version are you using, because each time you upgrade the rom the radio does not change and you need to upgrade this seperately. I need more info.
boz said:
You have read the mrvanx guide I take it, if not click it on my signature. Have you installed the latest hard SPl v7? and what radio version are you using, because each time you upgrade the rom the radio does not change and you need to upgrade this seperately. I need more info.
Click to expand...
Click to collapse
The mrvanx web page seems to be down at the moment.
my device info is:
Operator version 14.211.1.611
ROM Ver 2.11.61.1
ROM date 23/03/07
Radio version 1.38.00.01
Protocol Ver 32.71.7020.12H
I am al very new to this !
test67 said:
The mrvanx web page seems to be down at the moment.
my device info is:
Operator version 14.211.1.611
ROM Ver 2.11.61.1
ROM date 23/03/07
Radio version 1.38.00.01
Protocol Ver 32.71.7020.12H
I am al very new to this !
Click to expand...
Click to collapse
Site should be back on soon, best to wait. The radio version you have is not the newest but should be ok. Try a hard reset while you are waiting to see if this helps.
boz said:
Site should be back on soon, best to wait. The radio version you have is not the newest but should be ok. Try a hard reset while you are waiting to see if this helps.
Click to expand...
Click to collapse
looks like the problem is with T Mobile in my area, but thanks for the help !
Hi, i recently got this MDA II from a friend and finally succeeded in updating it to WM5 and ROM Version 1.72xxxxx T-Mobile (can't remember all the Numbers).
It work's perfectly for everything i wanted it for (Navi, etc.), except for phone calls. After entering the PIN it just says: Searching or No Service.
I tried a SIM from T-Mobile Austria (from where the MDA comes), and also one from Hutchinson Austria (3) - Same Prob. I also tried to unlock it with the unlock tool located on this frorum. I got no error but it told me that the phone already seems to be unlocked.
It's not a big deal for me because i never intended to use it as a phone replacement, but somehow it's bothering me a bit.
I don't know if the ROM upgrade from 1.6xxx to 1.72xxx is the Problem. To tell the true i don't even know from where I got this newer ROM. The only thing i know it was not from T-Mobile Austria.
I already found a Version from T-Mobile Austria (RUU16008GER_TMobile), but this Version is very old and I don't know if it's worth the risk of downgrading.
Can someone please give me an advice on what to do?
Thanks in advance
first of all then 1.66 and 1.72 are not wm5 roms at all they are just the last offical roms for these devices and they are wm2003 roms
second then they are roms not radiostacks (radiostacks are the software for the gsm module)
http://www.buzzdev.net/index.php?option=com_remository&Itemid=132&func=select&id=26
list of various radeostacks
personaly i use 1.19
Thank you, as you can see i'm a total newbee to this topic.
Is there somwhere a detailed manual for upgrading the radiostacks?
HimaUpgradeUt.exe
upgrade
rom if nk.nbf is present in the dir
and
radiostack if Radio_.nbf is present in the dir
so if you want to upgrade the radiostack along with the rom
one just make sure both of the files are present in the dir
if one wish to upgrade 1 of the 2 simply remove the other nbf file
same deal with extended rom
Thank you
Ok, i tried the 1.19 Radio Stack together with the Hima_-_Helmi_AKU3.5_ROM_SP2 ROM.
The update progress proceeded fine but i still have the same problem.
edit: Wow after 5 Minutes i've got a connection with A1 (right now i'm trying a Hutschinson SIM witch connects via GPRS automatically to A1)
Ok, i tried Roms Stack 1.19, 1.17 and 1.08.
On some certain locations i get a signal, but in general the signal is very poor.
I'm not shure but maybe the couse of the problem is the phones hardware itself, and not the software?
maybe
dont know about where you live but here i dont have too many issues
but the htc phones i had have in general had a poor signal then nokia and the likes
and poor conversation quality
you could try giving other sim cards a go as some older sims have had issues with htc phones in the past
I just wanted to inform everyone that you where right (again ).
Today i tried a newer Prepaid SIM from A1.
Now i get a full Signal from everywere in my house.
hi all, Gratz for great forum.
I received from friend of mine a brick called HTC - on back is label ARTE100.
it is freeze on bootscreen, that is good for now.
BUT i have information that it is comming from Netherlands, and was locked before.
Someone else is bricked upgrading it without CID unlock beforehand.
I have tried almost all available original ROMs, well some of them missed.
My question is is there any way to check by IMEI , which carrier was before?
And is there any available factory ROM from this carrier.
There is no sign or any label on it.
freezing screen is:
IPL 3.04.0001
SPL 3.04.0001
GSM 02.93.90
OS 3.4.0.0
Thank You Very much for any answer .
Stopper said:
hi all, Gratz for great forum.
I received from friend of mine a brick called HTC - on back is label ARTE100.
it is freeze on bootscreen, that is good for now.
BUT i have information that it is comming from Netherlands, and was locked before.
Someone else is bricked upgrading it without CID unlock beforehand.
I have tried almost all available original ROMs, well some of them missed.
My question is is there any way to check by IMEI , which carrier was before?
And is there any available factory ROM from this carrier.
There is no sign or any label on it.
freezing screen is:
IPL 3.04.0001
SPL 3.04.0001
GSM 02.93.90
OS 3.4.0.0
Thank You Very much for any answer .
Click to expand...
Click to collapse
imei is usually under the battery
and for availiable shipped rom versions click my signature,go to artenis section and under "upgrading" choose availiable shipped rom versions(or click here),also if you want you can try this before flashing the rom...the instructions are there too,just download the mtty and follow the steps from the link
Stopper said:
[...]
I have tried almost all available original ROMs, well some of them missed.
My question is is there any way to check by IMEI , which carrier was before?
[...]
Click to expand...
Click to collapse
I guys, I'm trying to repair my ARTEMIS that I bricked but I don't know which was the original rom because I have flashed with WM6 original rom the day after I bought it.
As asked by Stopper there is a way to know which was original rom so I could try to restore it by SD card?
thank you so much
bye
There's no way through the device (no device flash history), however it's usually the stock carrier ROM so try flashing to that.
kareem9nba said:
There's no way through the device (no device flash history), however it's usually the stock carrier ROM so try flashing to that.
Click to expand...
Click to collapse
The answers are confusing, I have one Mda Tmobile (Artemis) with exactly the same problem. It had german rom originally, and I tied Uspl and had error at the end, maybe the version was lower cause i did not check. Since I could not be able solve it. when you try wwe rom it says invalid vendor Id, any other rom give ivalid model id error.
Is there any solution available for this?
Thanks
Kenny
keke1 said:
The answers are confusing, I have one Mda Tmobile (Artemis) with exactly the same problem. It had german rom originally, and I tied Uspl and had error at the end, maybe the version was lower cause i did not check. Since I could not be able solve it. when you try wwe rom it says invalid vendor Id, any other rom give ivalid model id error.
Is there any solution available for this?
Thanks
Kenny
Click to expand...
Click to collapse
run the official exe
find it's content in users application data (in documents and settings)
copy to somewhere else
delete the spl.nbh and run the ruu
it worked with herald which was danish and now is wwe
haven't tried it on artemis,because it was wwe,but it should work