Related
Just got a s/h exec and I think it is faulty. Whats happens is it starts up ok and works for a while and then for no reason that I can think of it goes into a loop which stops it from working.
When I say a loop I'm not sure thats the right terminology but imagine if you tapped the start button and the start menu opens... and then imagine you tapped the tab button , the next item would highlight. If you tapped the tab button again the next item would highlight and so on. Well its as if the tab button is being hit over and over because all the items in the start menu will be highlighted one after the other over and over again.... it just goes round and round in a loop.
Its possible to escape from this and go to another screen but the same looping will go on in that screen too.
If you switch off and leave for a while and come back to it it works ok for a short time and thens starts the carry on again.
Sometimes if you just wait a while it stops, but will start doing it again even if you dont touch anything.
I've noticed one way to force it to stop is to slide the volume button... this seems to stop the loop and allows normal function for a while.... then the crazy looping starts again.
Has anyone seen this or know anything about it.
Nope sorry, maybe you can have it replaced where you bought it as from your post, you can recreate the problem easily.
Side Note : Have you tried Hard Resetting? Or installing another ROM?
I have tried hard resets and factory reset... problem remains.
Will try new ROM.... just trying to figure out how to do it !
weegee said:
I have tried hard resets and factory reset... problem remains.
Will try new ROM.... just trying to figure out how to do it !
Click to expand...
Click to collapse
Just download a new ROM form imate or something, unpack all the files in the ROM update to a directory, put the attached file in same directory.
Enter bootloader mode (Backlight + Power + Reset Hole) you will see SERAIL on the screen but not backlight so look hard.
Plug into PC, the SERIAL will change to USB
Run the attached file. You will see a photo of an S100 but continue anyway....
Hard reset when finished... DOne
ok have installed latest rom... but exec still doing loop loop
Just for arguments sake, can you try installing Imate's newest ROM?
yea thats the one i have just put on.
It seems to be doing the problem less than before. I notice that it does stop if i press the backlight key or move the sound slider.
I'm wondering if there is dust or dirt got in behind the buttons or something like that... although I would have thought other people would have come across this b4 if that was the problem. The machine is one of the first to come out, although I just got it a couple of days ago.
weegee said:
yea thats the one i have just put on.
It seems to be doing the problem less than before. I notice that it does stop if i press the backlight key or move the sound slider.
I'm wondering if there is dust or dirt got in behind the buttons or something like that... although I would have thought other people would have come across this b4 if that was the problem. The machine is one of the first to come out, although I just got it a couple of days ago.
Click to expand...
Click to collapse
If you have tried different ROM flavors and still get the same problem, then it is definitely hardware related. Send your unit in and demand for a new one not a repair
Just been playing around with it again and notice that I can make the problem happen if i press any of the keys on the navigation pad except the top one.... and i can stop the loop by pressing the light button.
Weird or what.
My initial thought on this is maybe its got wet at some point
I have opened the xda up and stripped it down to all its parts. No sign of any dampness or dust dirt etc. Dont see anything missing or broken.
Put back together, but still doing this.
Driving me nuts.... its a great machine but is very tiresom to use with this going on.
Another think I notice about this machine, I have never used it as a phone, but I tried putting a sim card in and There is no sound through the earpiece. Only sound comes from the speakers when you set it to speaker phone.
I suggest just return it and have it replaced. It's probably a faulty button. Probably gets stuck whenever you press it.
Doesnt need a button to be pressed for it to start.. just starts by itself... and can stop by itself too.
Sometimes it can for ages without doing it, other times it does it all the time.
Cant figure if its hardware or software problem
GHOST-IN-THE-MACHINE
Yea... maybe I should get a priest !
I had this problem when i first got mine, if you move the sound slider down, then up, it seems to stop doing it for a while, and it hasn't happened in the last couple of weeks atall, maybe its because its new, and just needs to settle in?
Jay
Well at least I'm not the only one to have it.
My sound slider does stop it happening but only for a while and then it starts up again.
The machine is perfect in every other way, its just an annoyance I could do without.
I've tried everything, even stripped it down and left parts out, like buttons, to see if they are the source, but no difference.
I have the same problem!!!!!!!!!
Someone help please!!!!!!!!!!!!!!!!!!!!!!!
I have same problem. I send to service but until today they can't repair that problem.
I went to do a defrag with Pocket Mechanics and it was supposed to restart in safe mode and defrag. But it only starts up in safe mode to the windows screen and stays there. Now I can't go anywhere else. Any ideas??? Thanks.
ThaiM said:
I went to do a defrag with Pocket Mechanics and it was supposed to restart in safe mode and defrag. But it only starts up in safe mode to the windows screen and stays there. Now I can't go anywhere else. Any ideas??? Thanks.
Click to expand...
Click to collapse
What version of PM are you running? I had this problem with 2.43 and I don't remember exactly how I got out of the situation. I seem to remember that PM creates a shortcut in \WINDOWS that is called from \WINDOWS\StartUp on restart. When I manually ran this shortcut, the situation was fixed on the next restart.
There have been several new versions since 2.43. There was at least 2.44 and 2.45, now I see there is a 2.50. It seems Anton has been so busy putting out new releases that he hasn't been able to keep up with the change logs, so I can't tell if this issue has been fixed. You may want to load the latest version and see if that helps. If not, send Anton a help request via his website www.wizcode.com, I am sure he will tell you how to fix it.
Note that all safe mode really does is disable your Today Screen items. Other than that, your device is still pretty much fully functional.
John
It's 2.45.
And it starts up to the "Windows Mobile" blue screen and just stays there. Nothing happens and I can't even do a soft reset or anything. Nothing. Active Sync can't connect to it so I can't execute anything. The only way is to take the battery out and then it just goes right back to this screen.
During startup, is there a key or something I can hold down to select a boot up option?
ThaiM said:
It's 2.45.
And it starts up to the "Windows Mobile" blue screen and just stays there. Nothing happens and I can't even do a soft reset or anything. Nothing. Active Sync can't connect to it so I can't execute anything. The only way is to take the battery out and then it just goes right back to this screen.
During startup, is there a key or something I can hold down to select a boot up option?
Click to expand...
Click to collapse
I assume you are trying to avoid a hard reset, as that would be the easiest option (and maybe the only one).
Before installing software I recommend a full backup program as your first ever purchase. These problems would cease to be problems as a hard reset can be followed by a full re-install of all your settings/programmes. I use SPB backup.
Mike
Yes, I'm trying to avoid a hard reset. And even then, I hope it works.
ThaiM said:
It's 2.45.
And it starts up to the "Windows Mobile" blue screen and just stays there. Nothing happens and I can't even do a soft reset or anything. Nothing. Active Sync can't connect to it so I can't execute anything. The only way is to take the battery out and then it just goes right back to this screen.
During startup, is there a key or something I can hold down to select a boot up option?
Click to expand...
Click to collapse
OK, this is not what I was experiencing with 2.43. I think you need to contact Anton for help. I agree with Mike Channon's suggestion, one of the first programs I bought when I switched over to Pocket PC was Spb Backup, and it has saved me several times.
John
I cant do anything with it, its just going nuts, volume goes up and down, dialer opens, start menu opens and closes....I cant do anything. I havent loaded any spls any cabs but the office2010 but thats it. help please?
I havent had any issues with the phone since day one (no lag or anything)
Can you get the tast manager open and see whats running?! you have restarted?! What are you doing when it begins to flip out. i bought a bootleg wall charger for my HD2 and it would do strange thing but only when I would plug it to charge but once I took it off the charger it was fine?! You might want to do a Factory Reset and re-install things one by one to see what it is that is causing your phone to wig out...
Yes, if there's no obvious connection between any action of yours (or a background app or anything) and this behavior, I would start with a Hard-reset like toreone suggested....if that doesn't clear it up, I'd get it replaced asap. It sounds to me like there's a short in the mobo somewhere that's causing phantom button presses to be registered.
ok
Yeah, I cant open the task manager cuz it closes instantly since the back button keeps activating. I have hard reseted but now my send,home, volume down, and menu button dont work I think Im gonna ask for a new one since this one is buggin out. thanks for your advice guys
Sounds like that is your best bet as the hardware buttons are seeming to be stuck.
Good luck
thread closed
Hi all,
I have had loads of problems with this phone, so I decided to do a factory reset.
It rebooted as normal until it got to the Motoblur setup page
It asks for the Motoblur details to be entered, but once you have entered them and pressed the 'next' button, it goes back to the previous screen instead of the next step and then gets stuck in a never ending loop.
I've tried skipping the sign in process but instead of skipping it, it just goes back to the first Motoblur account setup screen instead.
Out of desperation, I have tried to make several new Motoblur accounts but every single time, it gets to 80% completion, then stops.
I have even left running all night (plugged in) and it still freezes at 80%
I can't do another factory reset because it won't get past the Motoblur setup screen.
I've tried to do a hard reset by holding x and powering the phone on but this doesn't work. It just brings up the triangle and android robot but it does not go to the next step despite me leaving it for several minutes.
Only had it for 7 weeks and am awaiting a response from Expansys on what to do.
Any help from you guys will be greatly appreciated.
Apply a debrand image of your system and do a full wipe
phorenzik said:
I've tried to do a hard reset by holding x and powering the phone on but this doesn't work. It just brings up the triangle and android robot but it does not go to the next step despite me leaving it for several minutes.
Click to expand...
Click to collapse
Have you pressed the @ key when you get to this step with the robot and the triangle? That should bring up the reset menu, and then you use the volume and camera buttons to choose and select the option you require.
Cheers,
Steve.
StevePritchard said:
Have you pressed the @ key when you get to this step with the robot and the triangle? That should bring up the reset menu, and then you use the volume and camera buttons to choose and select the option you require.
Cheers,
Steve.
Click to expand...
Click to collapse
I didn't know you had to press @
Thanks
I've done a hard reset, but I still have the exact same problem.
If I try to input my proper Motoblur details it instantly says connection failed (it doesn't seem to even try to connect as fails the instant you press 'next)
Creating a new account hangs at 80%
Any more ideas before I throw it against a wall?
I notice there was an option to boot from SD in the recovey mode.
Would this allow me to boot an official motorola rom?
If so, where would I get the rom from?
A walkthorugh on exactly how to do this would be appreciated if this method could fix my issues.
I'm really annoyed because I sold my HD2 for this phone and I'm regretting it.
Thanks
phorenzik said:
I didn't know you had to press @
Thanks
I've done a hard reset, but I still have the exact same problem.
If I try to input my proper Motoblur details it instantly says connection failed (it doesn't seem to even try to connect as fails the instant you press 'next)
Creating a new account hangs at 80%
Any more ideas before I throw it against a wall?
Thanks
Click to expand...
Click to collapse
I think you need internet connection in order to validate your account or create a new one. Check your APN settings first, or do it on wifi.
Hi,
I've tried it whilst connected to my wifi router. I've even tried it via the data connection but nothing happens.
It seems that despite the data/wifi connections being there, it just ignores them.
I think this is the issue. It's not connecting and I don't know why
The phone displays the wifi/3G data symbols in the task bar but it doesn't seem to be using them during the Motoblur setup
Mine is dead too!!!
Hello everybody,
Greetings from sunny, flooded, blown away, Queensland Australia!
Long time lurker, first time poster...
I have a...
Vodafone-Australian-2.2-Milestone2
2 weeks old and its an expensive paper weight. It was rooted and thats about it, had a bunch of root required apps on there, installed the bootstrap, but hadnt installed Xrecovery yet.
I was playing around the other day. changing settings, installing and uninstalling a heap of apps, testing them. Some app suggested I restart or it restarted itself, cant recall, and that was the end. Boots until it gets past the M, and then its just bootloop city.
Won't register on comp in RSD or anything. Will boot to stock recovery and cleared cache and data several times, but that didnt fix anything. Won't even charge the battery. It will run an update but has to be signed. Problem is, we havent had any updates yet on these phones in Australia and there are no custom roms. What update.zip could I get to try to fix it, because I think thats about my only hope.
While recovery was wiping the data and cache it would stop frequently and each time I would touch the ok in the bottom corner of the screen and it would continue, and seemingly despite the 10 or more stops, completes fine. Surely thats not normal.
Out of ideas, I would just send it back with a story but the vodafone boot animation is replaced with disco flashing lights. and thats all it does, non-stop. Do you think they will notice someone has been tinkering?
Ideas? Thoughts?
Oh, and forgot to mention, when I first got it I had the same problem with the Motorola sign in wizard on startup, for quite a while, cant remember how I got around it though. Stop trying to sign in and just get out of that wizard, install ADW Launcher or similar and dont go near any Moto apps. You are only required to do a Gmail sign in, not Moto.
That's the problem though.
I'm stuck at the Motoblur sign in and it will not skip.
Whenever I select skip, it just goes back to the motoblur sign in page instead of going to the home screen.
Basically, in a nutshell, this is what's wrong:
I can't sign in to motoblur (gets stuck in a loop)
I can't create a new motoblur account (crashes at 80% every time)
I can't skip the sign in process (takes me back to the motoblur sign in page instead of loading home screen)
This is my first and last Motorola phone. Not good at all.
So what happens if you press press home or back repeatedly instead of skip? And if all fails reflash new SBF
benking1972 said:
So what happens if you press press home or back repeatedly instead of skip? And if all fails reflash new SBF
Click to expand...
Click to collapse
It just goes back to the motoblur setup/signin screen no matter how many time I press home, back or skip. It's as if a dll is missing and it's unable to boot to the home screen.
How do I flash a new SBF?
Motorola have agreed to let me return it but if I can do it myself I'd rather do it.
I have found this guide http://forum.xda-developers.com/showthread.php?p=11155476#post11155476
but the link to the UK SBF is dead
Yeah, that's the one, and the link to UK SBF works fine for me. If you can't get it to flash that way, then you are going to have to do it the way I am about to do mine, which is...
http://forum.xda-developers.com/showthread.php?t=804088
Failing that, send it back and be done with it.
since its so new id send it back. you shouldnt be having this problem at all. the milestone 2 is a very solid phone. i had mine running for 90 days straight not even a reboot or crash or anything lol. sounds like you just got a duff one. with any piece of technology theres bound to be a few that slip through the net. even if you find a fix for your problem you dont know what is causing it. and if youve had problems before then somethings obviously wrong. since theyve agreed to let you return it then thats your best option.
Probably i should send mine one back as well.
Bought a new Milestone 2 yesterday (from ebay, Chinese guys but as per retail package phones are for UK market). Put the SIM in just to check before wiping out everything from my old Defy. Made a call, checked the version and the menu and put the SIM back to Defy to backup all I needed. Plugged Milestone to the mains. 3 hours later found promising "Fully charged" on the screen and put the SIM in. That was it... Since I can't power the phone whatever I do. I thought the Power button went off as I tried to perform hard reset (x+Pwr), BRM (Arrow up+Pwr) and nothing happent at all. But then I put the phone on the charger again and the Power button worked fine switching the screen off and back on.
Any other methods to get the phone running?
UPDATE: It's strange and weird, but I've just had an idea to remove SD card and it worked - the phone powered on immediately!! Formatted the card using card reader, put it back - the phone works flawlessly. Fantastic! =))
Hi all,
Hope I might be able to get some advice. Excuse me up front if I butcher the jargon and/or description of the issue, I am but a simple (very, some might say) mobile phone user. I know nothing of the mystical world of 'rooting', and other Andriody black art.
So, here goes.
My wife owns a Samsung Galaxy S5 which hasn't been modified (except for the installation of a few extra apps) since the day it left the Vodafone shop. Today, for no apparent/obvious reason, the following is happening:
Switch phone on, boots into home screen when "Unfortunately, system UI has stopped” message is displayed. Click 'OK', messages disappears for approx 2 seconds and then comes back. Too short a time to do anything else with the phone.
After around a minute, the phone then reboots itself.
Once rebooted -> home screen -> "Unfortunately, system UI has stopped” -> repeat.
The only thing I could see happening, in between pressing the 'OK' button dozens of times, was some automatic App updates (Facebook Messenger and Facebook Pages Manager, were the two I saw).
The back of the phone is also getting pretty damned hot - related?
I've read a few 'Help me' pages online and managed to get the phone into Safe Mode thinking I could at least have a little look around while it was stabile. Wrong. The message and endless reboot cycles still occurred.
I'm loathed to do a full reset as I can't extract the photos from the phone - the phone won't stay 'up' long enough for me to copy them onto my laptop. The phone connects and is recognised but when it reboots itself Windows Explorer cracks it.
I know a lot people say "I didn't do anything", the only thing I've done to the phone prior to this issue was to remove the rear cover and re-seat the SD card (Sandisk Ultra 32Gb, if that's any use).
I really appreciate the time you hopefully take to read this and (hopefully) help out an old boy like me. Thanks heaps in advance.
simarjoshlib said:
Hi all,
Hope I might be able to get some advice. Excuse me up front if I butcher the jargon and/or description of the issue, I am but a simple (very, some might say) mobile phone user. I know nothing of the mystical world of 'rooting', and other Andriody black art.
So, here goes.
My wife owns a Samsung Galaxy S5 which hasn't been modified (except for the installation of a few extra apps) since the day it left the Vodafone shop. Today, for no apparent/obvious reason, the following is happening:
Switch phone on, boots into home screen when "Unfortunately, system UI has stopped” message is displayed. Click 'OK', messages disappears for approx 2 seconds and then comes back. Too short a time to do anything else with the phone.
After around a minute, the phone then reboots itself.
Once rebooted -> home screen -> "Unfortunately, system UI has stopped” -> repeat.
The only thing I could see happening, in between pressing the 'OK' button dozens of times, was some automatic App updates (Facebook Messenger and Facebook Pages Manager, were the two I saw).
The back of the phone is also getting pretty damned hot - related?
I've read a few 'Help me' pages online and managed to get the phone into Safe Mode thinking I could at least have a little look around while it was stabile. Wrong. The message and endless reboot cycles still occurred.
I'm loathed to do a full reset as I can't extract the photos from the phone - the phone won't stay 'up' long enough for me to copy them onto my laptop. The phone connects and is recognised but when it reboots itself Windows Explorer cracks it.
I know a lot people say "I didn't do anything", the only thing I've done to the phone prior to this issue was to remove the rear cover and re-seat the SD card (Sandisk Ultra 32Gb, if that's any use).
I really appreciate the time you hopefully take to read this and (hopefully) help out an old boy like me. Thanks heaps in advance.
Click to expand...
Click to collapse
sorry to hear about your luck mate, but im sure we can figure a way around this issue. The first thing id try is wiping the cache and dalvik cache. that can be done by turning the phone completely off (in your case, probably just pull the battery and put it back after a few seconds), then hold volume +, the home button and power. the phone should vibrate and when it does, continue holding the first two, but release the power button. then itll boot into factory recovery. You use the volume buttons to navigate the menu, and power to select. Go to wipe cache, confirm wipe and reboot
Hi, thanks for the reply. I've just followed your suggested action but unfortunately the phone is still doing exactly the same thing.
simarjoshlib said:
Hi, thanks for the reply. I've just followed your suggested action but unfortunately the phone is still doing exactly the same thing.
Click to expand...
Click to collapse
np. ok, so you should be able to connect the phone to your computer in recovery and mount it so you can get the pictures off. After youve grabbed everything you need from the phone, then nuke it with Odin and the correct tar.md5 file and see what s what at that point
I agree. You might as well root it at that point.
youdoofus said:
np. ok, so you should be able to connect the phone to your computer in recovery and mount it so you can get the pictures off. After youve grabbed everything you need from the phone, then nuke it with Odin and the correct tar.md5 file and see what s what at that point
Click to expand...
Click to collapse
Assume you mean the 'mount/system' option from the system menu (hold volume +, the home button and power)? If so, I select this option and it doesn't appear to do anything. It seems to accept the entry by confirming the action at the bottom of the screen. So, I select 'boot' (top option), the phone starts as usual and then begins the cycle of - error message -> reboot, etc, etc after approx 15-20 seconds.
Is there no way to access the internal physical memory of the phone (even by force) to access the data stored there? Thanks again.
simarjoshlib said:
Assume you mean the 'mount/system' option from the system menu (hold volume +, the home button and power)? If so, I select this option and it doesn't appear to do anything. It seems to accept the entry by confirming the action at the bottom of the screen. So, I select 'boot' (top option), the phone starts as usual and then begins the cycle of - error message -> reboot, etc, etc after approx 15-20 seconds.
Is there no way to access the internal physical memory of the phone (even by force) to access the data stored there? Thanks again.
Click to expand...
Click to collapse
wait, you can actually see this stuff on the screen to select from?