Hi,
I want to synchronize my Uni over BT. I installed drivers for BT donge msi-6967. I found device and succesfully added it. File exchange works well. I want now set up AS 4.2 to sync with my uni. I tried almost everything but it isn't work.. Thanx
Delete the pair from the PC. Delete it from PPC. Disconnect USB cable. GO to PPC, pair the PC. When you do that, does ActiveSync show up as an available service?
Related
I've flashed my device with WM2005 yesterdag, and I love it. I don't have any problems yet with unmapped buttons, USB Activesync etc.
But I do have some problems with Bluetooth Activesync. It doesn't work whatever I do.
I've installed ActiveSync 4.0 latest build, and USB sync'n works fine.
I've deleted the partership, and paired the device with my Sitecom Bluetooth USB adapter.
My WM2005 tells me that I've 3 available services (Headset, Serial Port and Dailup Networking). I've selected all of them except Headset. Than I started Activesync on my device and selected Connect via Bluetooth; After that I'm told there are no bluetooth partnerships with a PC that supports Activesync. And I'm asked to set up a partnership.
I did again, deleted the complete partnership on both pc and device; recreated the partnership and tried again. Same problem. After that I manually created incomming and outgoing comports which resulted in the same problems.
The strange thing is, that I see the comport service shortly in my Bluetooth Places but than disappears.
Can someone help me to get Activesync via Bluetooth working?
will someone please help me in configuring active sync over bluetooth..
i want to connect my jasjar with my pc over bluetooth.
when i search in the bluetooth of my jasjar the computer is shown in the devices but in the service there is no activesync
Hi I was puzzled with this the other day. I found that if you open ActiveSync and click Menu then Connect via Bluetooth. It worked fine then.
Hope this helps
B
Before you can connect, you need to make sure your PC has a bluetooth com port. Then in ActiveSync, enable connection via that com port.
Once that's done, you can use the connect via bluetooth on activesync on your ppc, and you can choose your pc.
Hi everybody,
I'm trying to sync my trinity with a laptop using bluetooth, but it seems imposible 'til now. Has anybody been able to?
It seems there's not pim service on the p3600, also creating a com connection doesn't work...
Any idea or howto???
Thanks in advance.
You'll need to set up your ActiveSync (AS) in your PC to point to the port which your Bluet is using. After that, use your phone to 'discover' your PC and you should have AS service for your Bt in PC.
You mean...
In Bluetooth configuration on the pc I have COM9 assigned to bluetooth Serial Port and COM8 for ActiveSync. So you say I have to set as incoming serial port COM8 in P3600??
Configure the AS to use COM9 (in your case).
Thanks
But still no luck, it seems to be connected but activesync says there's no device in that port, I'm afraid it's a compatibility problem between my laptop bluetooth drivers and P3600 ones.
Anyway thanks for your help, I'll keep on trying...
Probably you can init a sync from PC, but the one I tried is to initialize a sync from my PPC. Once you have AS to use serial of your BT, then while discovering services (or pairing) from you PPC, your PPC should show that there is AS service on the PC. Start your AS on your PPC and sync.
I had a bit of trouble but I've sorted it out now, this is what I did:
1. Uninstall any bundled software and drivers that came with your dongle.
2. Stick the dongle in, and let Windows automatically install the drivers.
3. Make your PC "discoverable" through the bluetooth control panel.
4. Create an incoming port, and take note of the port number
5. In ActiveSync on your PC, go to connection settings and enable a connection through that port.
5. On your phone, go to ActiveSync and select "connect via bluetooth"
6. It will say that you need to establish a partnership or something, press ok, and find your PC, when the services dialogue comes up, select "ActiveSync".
7. Try pressing connect via bluetooth again and it should work!
El_Mariachi said:
I had a bit of trouble but I've sorted it out now, this is what I did:
1. Uninstall any bundled software and drivers that came with your dongle.
2. Stick the dongle in, and let Windows automatically install the drivers.
3. Make your PC "discoverable" through the bluetooth control panel.
4. Create an incoming port, and take note of the port number
5. In ActiveSync on your PC, go to connection settings and enable a connection through that port.
5. On your phone, go to ActiveSync and select "connect via bluetooth"
6. It will say that you need to establish a partnership or something, press ok, and find your PC, when the services dialogue comes up, select "ActiveSync".
7. Try pressing connect via bluetooth again and it should work!
Click to expand...
Click to collapse
Can anyone please tell me why i dont see any services on my P3600 after i am connected to the PC? I used to do this with my Prophet (same laptop) without any problems but the P3600 is not able to see any services.
i use this settings
http://www.htcwiki.com/page/activesync+via+bluetooth
it's work for me.
MrTW said:
Can anyone please tell me why i dont see any services on my P3600 after i am connected to the PC? I used to do this with my Prophet (same laptop) without any problems but the P3600 is not able to see any services.
Click to expand...
Click to collapse
Same here... Active sync does start and tries to connect when pairing... but it times out and the activesync service is not seen as an option on the ppc.
Julioski said:
Hi everybody,
I'm trying to sync my trinity with a laptop using bluetooth, but it seems imposible 'til now. Has anybody been able to?
It seems there's not pim service on the p3600, also creating a com connection doesn't work...
Any idea or howto???
Thanks in advance.
Click to expand...
Click to collapse
Hi
What kind of software are you using microsoft widcomm or bluesoleil.
I've managed through pain and misery to get Activesync to work through bluetooth (not easy with widcomm stacks as drivers).
When my PC boots up, Activesync (PC) will complain that the bluetooth COM port isn't connected (obviously because my phone isn't connected through bluetooth 24/7)
So everytime I reboot my PC, I have to re-check the COM port connection in the connection options (PC) to make Activesync listen to my bluetooth COM.
Any suggestions?
Also, I know that when my phone is connected via USB, my phone will gain access to the internet (My PC has the internet connection and shares it to the phone). With bluetooth I havent been able to get this to work. Yet both USB & bluetooth work through Activesync. Is there something Im missing?
Thnx! I hope this isn't too specific/complicated like question
I used to have some of the same problems. What I found that usually it was 2 things causing it.
1. Activesync - Installation or Configuration
2. BT Software - Installation, Configuration or Need BT Software upgrade
What fixed my issue was 2 fold: activesync settings & needed to upgrade my dongle's software.
Activesync: When I installed 4.5 it setup a network connection that kept running in. And when I started up my PC I could see the icon running in my sys-tray (and would have troubles on and off again either with bluetooth / USB sync. What I found that worked for activesync was uninstall and make sure you check off allow wireless activesync connection. I've also found it likes to use com 3 for BT activesync.
BT Dongle: I have Motorola PC850 dongle and found that there was a great new BT Stack update that would hold the settings even if I turned my PC off for weeks at a time or removed the dongle to somewhere else. Plus it fixed the issue I had with using my BT stereo headset, to listen to music with out pops and skips. Oh In your BT settings make sure that com 3 or what ever your using is the same as activesync
Hope I can test those few tweaks.
However, after connecting my phone to activesync by USB, now my phone won't even connect by bluetooth to my PC anymore.
STUPID STUPID bluetooth stacks
i'm using ivt corporate bluesoleil and qtek 2020 wm5
can't connect via bluetooth
neeeeeeed help plz
http://www.geekzone.co.nz/content.asp?contentid=2417
i said ivt corporate bluesoleil
plz post specific directions
dont know the software you can try to look at the other guides for bluetooth they got on their site
or try the general thing with making a virtuel bluetooth comport and use that for activesync
or try to update the bluetooth software on the pc
...
Hi,
got the same problem with that ugly bluesoleil bluetooth stack; cause I'm running WM6 I had the choice of Com0-Com9, but that bluesoleil stack only delivers com-ports starting from Com11. The Windows Bluetooth stack wasn't available.
Workarounds didn't work. At last I got two correspondending COM Ports but the Connection with Activesync was disabled after a short while.
So I will buy another Bluetooth stick which uses Windows or Widcomm Bluetooth Stack.
So long
HonkBB
I succed to connect via bluetooth with WM6. I use windcomm bluetooth donggle in my PC. When I install the driver,which came with the donggle, the problem begin. I cannot connect my Hima to the PC. Then I delete the driver from windcomm and use only the driver from windows XP sp2.
1. Turn on the bluetooh from your PDA so that your pc can recognize your hima
2. explore your bluetooth connection on your pc, make your incoming port, and remember the port which automatically provide by the pc.
3. Open your active sync from your pc, open the connectio setting. Checkbox the "allow connections to one of the following" anda chose the port that you have just made in steps 2. And press ok
4. Open active sync, and from menu press connect via bluetooth. If your device haven't paired yet, then the next step to make pairing as usual
5. After you finish pairing step, you are ready to sync via bluetooth