Was working OK...went to install spb clone..asked if I wanted to make a clone of the device on my existing mini-SD card..I said yes. Now it hangs at the "Windows Mobile" screen...
I tried the Hard - Reset (push the two buttons and hold in the soft-reset button, press green phone button...) and also taking the battery out.
It boots up with Cingular screen with info about ROM then goes to Windows Mobile screen...that's it. The BT and green power light flash (I had on BT before it crashed)...
Anyone have any ideas...? I hope it's not fricked up...of course I could always take it back I think...
TIA...
--Jack
did you hard reset without the sd card in the device :?: :?
I left the card in and waited for some time the first and second times...now I have the card out and also the battery out hoping it will boot when I put the battery back in..
Any way to "re-ROM" this sucker?... :shock:
dont know about re-rom, but my guess is it should load fine without the sd card, i suspect the card may have become corrupt which is causing the device to hang, had similar problem myself after installing pocket mechanic it took a hard reset and a format of the card to solve it :roll:
heres hoping it works for you after hard reset :wink:
been trying to hard reset it for a while now...still hangs at the blue windows screen. hooked it up to the pc and will try to install a diff rom and see what other type of damage i can do. :roll:
Can you get your wizard into USB mode by holding down the voice command button, hitting the reset button with your stylus, and continuing to hold the voice command down for a couple seconds until you get a three-color screen?
If you can get to this screen, your bootloader is intact, and there is still definite hope for your device.
Got it working...weew...
Left the battery out all night..did a hard reset and got the "format complete" on the black screen..after that...it was ok.
thanx for all the help guys..
Related
I've got an M5000...
recently, I did a reset, and upon reboot, I got stuck at teh orange default splash screen.
That was 5 days ago, and after several calls, I'm no closer to finding out why..
So, can someone confirm how to do a hard reset. (I've tried, but heard nothing.
or can anyone offer advise to get my phone back to fectory settings.. I've got a back up of my data, so I'm not bothered about loosing anything.
I've got qa 1Gb SD card, with very little info on it, and I've tried rebooting with and without the card in place.
Any ideas, before I pull my hair out...?
Tris...
To do a hard reset on the Universal:
Press and hold both SoftKeys (the ones with the lines on that point to Calendar and Contacts on the Today screen) and tap the Reset button at the back of the device.
When you have done this you have a choice of pressing X to exit the menu, or 0 to perform the hard reset.
As a last resort (it worked for me)
Put the Universal into bootloader then connect the usb and run romupdate.
to put into bootloader
Power button + Voice record + Reset.
Hi, I'v got O2 XDA Mini S and a "little" problem with it. I'v just installed Phone Profiles [Second Edition] 8.0 and it crashed my phone. After installation (on my memory card), I could not see it on my today screen...so I'v tried to configure it in today screen configuration - but I could not get there - the configuration we're not accessible (it crashed). So after that, soft reset. And the real problem began. After the boot screen and "windows mobile welcome screen" the mobile just freezes. Active sync on my PC connects to it just for a second, then disconnects. The Phone Profiles [Second Edition] 8.0 is installed on my memory card, so I'v removed the memory card - the same problem. It was annoying - so hard reset....does not help. I have Wisbar Advance 2 as well, which is starting first and I can see only the welcome screen of it (sometimes it loads and I can see the whole skin). Sometimes (after reboot) I can see the menu, today screen etc. but the phone freezes. I think that the Phone Profiles [Second Edition] 8.0 is freezing the phone after his process starts. Is there anything like "safe mode" start or something like that, which could help me to remove this soft ? Or any other way to normally start the phone ? Any ideas ? Many thanks for help.
It should start after hard reset - phone profiles, wisbar advance will not load after a proper hard reset - the phone will be back to factory condition.
Did you do proper hard reset? After that it sounds like phone profiles should be installed to device memory not storage card. Most today plugins only work properly on device memory.
I'v done the hard reset (I think it was done properly - comm manager and voice command button pressed in the same time and then reset button). But after I'v pressed these buttons, nothing specially happend....the phone was still off. So I'v turned it on....and there were no changes with the software - still the same. Maybe I'm doing the hard reset wrong ?
leez said:
I'v done the hard reset (I think it was done properly - comm manager and voice command button pressed in the same time and then reset button). But after I'v pressed these buttons, nothing specially happend....the phone was still off. So I'v turned it on....and there were no changes with the software - still the same. Maybe I'm doing the hard reset wrong ?
Click to expand...
Click to collapse
Yep sounds like hard reset is not done. Press these 2 buttons but keep them pressed and dont let go - then press reset with the tip of the stylus and then text should come on the screen with black background. Press green (call) button and hard reset will commence.
Or you can first turn device off - then press the 2 buttons and keep them held and press power on to reach the same screen.
Ok, I'v done it. Many, many thanks for help. The phone manual is wrong (!). . Anyway Phone Profiles [Second Edition] 8.0....WTF is that ? This program just crashed my phone and I need to reinstall all the soft. Wrrr. And I just wanted a profile manager . Thanks again for help ! :mrgreen:
Good, I am glad - try the one I use - its free http://www.winmobileapps.com/device/pocketpc/plt/plt_download.aspx
Nice one, got it. Thanks.
Hi,
I have a tmobile MDA (wizard). I attempted to install some software on it, but disconnected and rebooted before it was complete (it appeared to be just spinning).
Now after a soft reset, screen shows only 'Windows Mobile' after booting, and none of the buttons work and I can't advance from this screen.
Is there a way to hard reset that doesn't involve using the OS (ie, I can't click on anything because it's not getting to that point).
Also in this state activesync isn't detecting device.
Thanks in advance! - Chris
Hold down (and keep holding) the camera button while depressing the reset button. Hopefully it boots into a tri-color screen. If so, plug it into the USB port and, at the bottom of the screen, it should display "USB". If that happens, flash it with a *known good rom*, such as a stock T-Mobile rom. Don't try to be clever, the object is to get the phone working. Once the flash has started, *get up and walk away* for 15 or 20 minutes. Don't check in on it, leave it alone, It takes some time. When you hear it's little chime, it's done, rebooted and ready. If any of the above doesn't happen or the flash outright fails, then you may have trashed it permanently. It doesn't sound like it's beyond hope yet, however.
i have the wizard and im having the same problem after installing a ROM from this website...it just goes to the windows mobile screen with the numbers then shuts off...id really like to save my phone is there anything else i can try because that hard reset thing isnt working
axxeman001 said:
Hi,
I have a tmobile MDA (wizard). I attempted to install some software on it, but disconnected and rebooted before it was complete (it appeared to be just spinning).
Now after a soft reset, screen shows only 'Windows Mobile' after booting, and none of the buttons work and I can't advance from this screen.
Is there a way to hard reset that doesn't involve using the OS (ie, I can't click on anything because it's not getting to that point).
Also in this state activesync isn't detecting device.
Thanks in advance! - Chris
Click to expand...
Click to collapse
Well same thing happened to me a few days back.. I had to Cold Reset [which restored it to factory defaults], but hey I got it working again..
Press Communication Button [Top Left] and Record Button [Top Right] at the same time and use the stylus to soft reset..
You will get a black screen, asking you to press "Send" to reset to "Factory defaults"
Press "Send".
Hopefully you should get your MDA working again ...
I read the "Above" in the HTC Wizard Service Manual [PDF] on the *last page* under the "Cold-reset" Section..
hi,
i recently wanted to simply restart my qtek s200 (g3), it stops at the blue windows mobile boot screen and just hangs and does nothing (i've waited for hours).
I am not using any mods, simply the original rom/software. The only thing extra installed is 3rd party software and the home screen from the new htc touch (i've have been using it for some time now, and yes, i have been able to reboot several times during that period).
I have no idea why it isn't working anymore since I have been using it in an ordinary fashion and have not installed any software lately...
What I have tried so far:
- soft reset
- removing battery, sd card, sim card
- hard reset is impossible due to the fact that my comm button no longer functions.
Any ideas how I can get this phone to boot in windows again?
If there is no "normal" way, then a hard reset would also work for me as the phone contains no important data.
Let me know if you need more info.
Thanks!
thierry86 said:
hi,
i recently wanted to simply restart my qtek s200 (g3), it stops at the blue windows mobile boot screen and just hangs and does nothing (i've waited for hours).
I am not using any mods, simply the original rom/software. The only thing extra installed is 3rd party software and the home screen from the new htc touch (i've have been using it for some time now, and yes, i have been able to reboot several times during that period).
I have no idea why it isn't working anymore since I have been using it in an ordinary fashion and have not installed any software lately...
What I have tried so far:
- soft reset
- removing battery, sd card, sim card
- hard reset is impossible due to the fact that my comm button no longer functions.
Any ideas how I can get this phone to boot in windows again?
If there is no "normal" way, then a hard reset would also work for me as the phone contains no important data.
Let me know if you need more info.
Thanks!
Click to expand...
Click to collapse
Since no hard reset is available... try removing the battery for the whole night.
If you do manage to get to windows then watch out for the startup folder, you're probably overloading the memory at startup.(htc home and psxut eat a lot at startup and windows as well)
i have removed the battery, sim and sd, and just left it there the whole night, but it still won't go further than the windows boot screen...
any suggestions ?
is is possible to do a hard reset by connecting it to usb and enter the bootloader somehow ? if yes, how ?
thanks!
hi,
have you tryed entering bootloader by the normal process?
"Hold down the camera button and reset the device. (Boot Loader Mode is: Press Camera + Soft Reset, then release soft reset and keep pressing camera button till appear the Boot Loader.)"
regards
yes, I can get into the bootloader, I can then also connect with USB with a notification at the bottom of the screen saying it's connected. However, I have no idea what to do afterwards ...
thierry86 said:
yes, I can get into the bootloader, I can then also connect with USB with a notification at the bottom of the screen saying it's connected. However, I have no idea what to do afterwards ...
Click to expand...
Click to collapse
Okay then there is still hope.. When you have connected the device run an opdate tool like the NVID WM5 Rom.. that should work as a hard reset..
are there any working links available for this ? rapidshare seems to have disabled this...
thanks!
thierry86 said:
yes, I can get into the bootloader, I can then also connect with USB with a notification at the bottom of the screen saying it's connected. However, I have no idea what to do afterwards ...
Click to expand...
Click to collapse
As long as you are able to enter bootloader then you can flash it with any old prophet rom. I had the same issue after installing WM6 rom. I used a Spanish rom on wiki to bring it back and then installed WM6 VII touch. So far it has worked well for a week.
HTC 6tab Home screen killed my 818pro!!!!!!
Here is what happened a few days back. My 818pro (aka prophet) suddenly heat up while not in use 3 days ago. I thought it was caused by the hot weather in my country (I was driving with aircond in full blast). The heating up eventually go away. Then 2 day later, after I put down a call, my phone just frozen / hung. Hence, I do a soft reset & guess what It never recovered & stop at the black screen with the dopod logo while restarting. Some service centre I visited told me that the main memory chip need replacement & reflash!!! I can't even see the window screen. I have use the HTC 6tab for 2 months & I am very sure it's the culprit here. Hopefully you are not having the same problem like me
Try plug in the ac charger before u do soft reset. My phone need it in order to restart after soft reset (after I started using the HTC 6tab Home Screen).
That is before my phone die yesterday
Hi all
first post and i got an interesting problem with my phone which i qualify as stupid. It all started when when my virtually keyborad started becoming unresponsive and when i tried to do a factory reset, i could not enter the 1234 number to start it. i left the phone for a while and then i could not get into the setting even . But i could receive calls but i could not call since i could not access any numbers on the dial pad( by pressing on the numbers of coruse but from dial log screen i could)
Anyway long story short while fiddling with the phone , i thought the lock feature was on that is why some of the touch functions was not totally responsive but to my sadness, i activated the lock and now the phone is stuck on the front page and i cannot access anything since i must press unlock at the far corner of the down screen but stupidly, while pressing on the unlock, since it is unresponsive, i cannot unlock the phone to get to the normal menu and so on.The only thing working is the square pad which tells me to press cancel then unlock to free the phone for normal use
By the way the lock feature is the one that blocks the phone so that you do not accidentally press on the touch screen and activate a program and not the lock thing operators put to limit your phone
I want to know if anyone can help me unlock the screen so that i can reset the phone or alternatively any other method via usb to reset my phone to factory settings. Any special buttons on the phone i can do to do that?
I tired leaving battery out for 24 hours but that did not work to unfreeze the touch buttons
Was thinking to reload the windows mobile completely via the micro card (which i read here) but i am not sure it will work or i fear it might brick my phone
Any suggestions will be welcome please.... thanks
Use myMobiler to control device from Pc through usb
Good luck
Ps: you'll probably have to change digitiser afterwards
Well tried the mobiler but the thing is that it asks the phone to allow the program to conenct and i cannot press yes on the touch screen since it is frozen or something so i am stuck again.
Very strange, it doesn't ask anything on my device...
Why don't you hard reset: press green and red buttons and while pressing, poke the stylus shortly in the reset hole then release the 2 buttons. It will ask something that you probably won't see, just press the action button and wait for it to restart.
Don't flash another on just yet - it may well cause issues as it sounds like your digitizer is broken. Don't hard reset either
Does it pick up anything at all? Have you tried tapping all over the place in that region to try and get a response, sometimes just under the screen also works. Do you use a screen protector? If not, try it with one, if yes, try it without, it may be interferring with it, or it may help the touch be picked up by the phone (Stupid, I know, but this is something I found to work before with my elfs, and omnias)
When it is locked, is activesync picking the phone up? You may be able to put the remote.exe into the windows folder (for myMobilier) and do it that way.
A digitizer costs about £6-£10. But due to the age of this device, as sad as it is, I would suggest trying a new phone out if funds allow for it.
ok so far i tried the hard reset (red button and green and pressed the on off button but nothing. When i press on off button alone it switches off but not hard reset. I did not know i had a reset hole at the bottom of the phone.I did that with red and green button but nothing. Only when i poke the hole alone it does a hard reset i think but when i switches back on it is still unresponsive and locked screen
I tried poking under screen protector nothing. Also i think screen is still responsive because when i tap on it, the screen lights brighter
I tired putting remote exe file on the phone( active sync is working and i can read files on the phone) but i have two remote files..which one to use ? the one that ends with 40 one or 50 .Also where to put it specifically..which folder.I tried my windows mobile based device but nothing.Also tried program files and data application nothing.
Mobiler cannot connect since from pc alone because it asks my phone permission
and i cannot tap yes to accept program.
so any more suggestions please
Hi
Maybe I wasn't clear enough, here's the exact procedure, it should work since you have to use only hardware buttons:
Hold down send/reject buttons (green/red at the front) and reset with the stylus; release the stylus but keep holding the buttons till you get 'this will erase all your personal data' message, then press 'action' (big front button) to hard reset.
If Hard reset doesn't work then your device hardware is faulty.
If he hard resets he will liekly not be able to align the screen on initial setup tito12.
Avanisha. If you try to run one of the remote.exe it will say this is not a valid windows application, thats the one that needs to go into windows on your phone.
captainstu72 said:
If he hard resets he will liekly not be able to align the screen on initial setup tito12.
Click to expand...
Click to collapse
Hi captainstu72, i was under the impression that he messed up something in his system so a hard reset would hopefully solve the problem. In case he still can't align the screen after HR then he has to replace the digitiser. Mymobiler will not solve anything, pls read the 1st post: he wanted to do a factory reset. He just have to sync before HR.
thks tito 12..problem was solved with your help.J ust did not get the steps of hard reset right. Phone is working ok now and screen is ok as well as tap function. thank god i don't need a digitizer. thanks to captainstu72 for the help as well .You were right tito..seems i ran a program and then all hell broke on my phone. I wanted to factory reset but as you know the pad was locked.
Glad I could help, enjoy your device
Ahh okay, guess i mis read something! Sorry
Glad its all sorted though, I was just concerned he may end up in an annoying align screen loop