Related
Hey guys,
of course AS 4.1 is rubbish, so I found a good alternative in SPB backup. However, it's supposed to soft reset after backup (I scheduled a daily backup), but sometimes it just hangs the OS. When this happens I cannot get any incoming calls or messages until I SR myself.
Anyone has that too?
Thanks!
At first I was having this same problem. I'd wake up every morning (setting my phone to backup at 1am) with the thing completely hung up and almost out of battery power.
I switched to having it not soft reset, had that run for a couple of days, and then I switched it back to soft reset. In the 3 days since I've done that it hasn't hung up - and has successfully soft reseted itself.
I don't know exactly what the problem was.
CameronJ said:
At first I was having this same problem. I'd wake up every morning (setting my phone to backup at 1am) with the thing completely hung up and almost out of battery power.
I switched to having it not soft reset, had that run for a couple of days, and then I switched it back to soft reset. In the 3 days since I've done that it hasn't hung up - and has successfully soft reseted itself.
I don't know exactly what the problem was.
Click to expand...
Click to collapse
Thanks for sharing man. I had the same drill, (a few days without SR, then back again) but after a while it started to hang again. I think there might be a registry solution for this or a software conflict to resolve, but that's beyond my PDA knowledge. I was hoping the experts here would save the day...
Me too
I'm having the same problem (and alas started another thread before I found this one) and have turned off the reset feature as well. I'm using skschema to perform the soft reset.
Hello, guys!
Could some of you post a bug report about that at http://www.spbsoftwarehouse.com/products/backup/askquestion.html?en? SPb team always answer very promptly. and they will for sure fix it in the next release.
i also have this problem.
no SR problem here on AKU2. I'm running the Qtek rom.
cBorisa said:
Hello, guys!
Could some of you post a bug report about that at http://www.spbsoftwarehouse.com/products/backup/askquestion.html?en? SPb team always answer very promptly. and they will for sure fix it in the next release.
Click to expand...
Click to collapse
I did this.
Im currently using the imate rom 2.16.9.1.wwe Rom date 2/6/06 extrom version 0 2.16.9.101
It has been working fine for the past few weeks and the performane increase has been much better. I was also using the oush mail which also worked well. Then a few days ago I started to have a few problems with the phone, basically it would look as if it was working the lights flashing, however when I went to turn it on it wouldn’t turn on. The only way to resolve this si to soft reset the handset. This problem is now occuring on average 2 times a day! I havent even installed any new software!! Thwe only major incident before this started happening was I used skype twice! But havent used it since! I have also stopped push mail cause I thought this maybe the issue but it didn’t solve it!
Its so annoying cause I think the device is operating normally cause I see the flashing lights however it cant do anything cause it has frozen!
Any ideas???
I was thinking of going for a hard reset but if I restore my backup ive taken with spb will this not just reintroduce the problem?
just to add for further info i have no apps running and the
program memory is total - 44.01mb
in use 19.67mb and Free 24.34
thats after a soft reboot!!
This might be a really silly suggestion, so appologies if it is, but could it be just the backlight turned off for some reason so it looks like the device is off when it is actually on?
No, I don't think that it is the backlight as I am also now experiencing this same problem ... approx 1 - 2 time daily. You think that the phone is functioning until you try to use it. Only option is soft reset.
Any help on this would be appreciated.
no at present a soft reset is the only cure and even then it may occur again later on! Bluey HK are you using the same rom as me??? the imate one?
its done it twice already today and its only midday! the last time i was just browsing the web, closed the browser, then switched it off and then couldnt turn it back on! Do you think it may be a memory leakage issue????
This happened to me yesterday on my T-Mobile MDA. I am running the latest T-Mobile_RUU_Wizard_2210401_221_20710_ENG_US image from xelencin.
What appears to have triggered the problem for me was attempting to connect to T-Mobile's My Email app to download mailbox settings while the signal level is too low or intermittent (Wi-fi and Bluetooth were disabled).
The backlight would not turn on and I could observe the My Email app trying to access the server.
it sounds as though it may be a bug connected with a GPRS connection???
ahh its done it again, this time i wasnt doing anything just died! I think i am gonnna have to do a hard reset cause this is making the phone unuseable!
if i do a hard reset and then install a back up is there a high possibility that this will reintroduce the bug???
its not the backlight
my 8125 is having the same damn problem. its nto a backlight issue, as it just stalls, and the past 4 times its done it, i've just removed the battery and turned it back on as a soft reset wont work, and i can't it to react to any commands. this is either a software issue all our phones are dying. i was having this problem with summitter's previous 2.17 rom, then updated to the recent 2.17.11 aku 2.2 rom... thinking the upgraded rom is what it needed...NOPE... still crashed. almost all instances i believe are when the wifi connection was active. but i could be making that up, i'm positive on 3 occasions it was with a wifi connection active. but not too sure about the 4th.
this is making me insane, and we need to figure out whats up~!
to expound on the problem:
one time i was in the middle of checking voicemail, then tried to delete, but the screen wouldn't light up, and it wasn't responding to my option 7 to delete command. the other time was in the middle of a phone call. something's up....
i am having the same issue with my 9100, its running the latest offical rom, mine does it whenever it feels i dont believe it is wifi or gprs related as i have the problem at time when i have been using neither.
there does not appear to be a link to any software i am using either
any ideas?.
yea- i get the same sometimes, i go to take my phone out of standby and it wont do anything, the power button doesnt work- the light just flashes. sometimes it freezes on the today screen, the power button dont work or anything. really need to sort this!
any ideas? any1 else get this? its where u put ur MDA in standby, and next time u press power button 2 turn on nufin happens, but the leds still flash at the top!
yep i still get the problem! still no cure!
I have exactly the same problem... I just pick up my device from my pocket to use it, I press on the power button once but the device won't wake up from the standby mode. I wish someone can give us a cure.
Low Battery...
I had this happen to me once recently...for me it was becuase my battery was too low. Freaked me out, because everything looked good, but I would power on and get nothing! Right after it started it powered on for a sec then quit. I had to put it on the charger and leave it for a couple hours to get a good solid charge, then everything was fine. Hope this helps....
thanks for the response, unfortunately mine is definately not related to the battery charge!
mine hasnt done it in the last day, ive been leaving it a while before putting it into standby. i used to exit my app (messaging or whatever) and shut it off straightaway, but i give it a sec or 2 to make sure its all good
and its doin ok so far!
Guys
I am facing a really weird problem which is becoming increasingly frustrating and driving me nuts.
I usually charge my phone overnite using the stock charger. The phone powers off after a while as per the the settings (15 mins I think) and stays like that throughout the night. But in the morning it fails to wake up totally. Nothin works. So, I am forced to soft reset it everytime this happens. This has happened quite a few times now.
Any ideas why this might be happening? This is killing me because the alarms dont sound and the phone is totally dead in the morning.
ps. I am using the stock HTC ROM (1.18, 07/22), on Cingular UMTS.
Thanks in advance.
JoKer
Dude, I'm getting the EXACT same thing!!!! I'm using using the stock TyTN ROM! I have no idea what's causing it, or even how to fix it. I thought it had something to do with software, but that doesn't seem to be the case here. I need help too!!!!
) .. that's crazy .. maybe this is the next SA ... jk ..
but seriously ... maybe there are more folks with this prob ... let's see if anyone knows any more details about this or how to fix it ..
And the really strangest thing is that this doesnt happen to me in the day .. it powers off and wakes up fine .. but then it's never powered off for that long ..
Mine seems to happen when it's powered off for a given amount of time. It's insanely annoying because I have to reboot, and I hate rebooting the phone.
I've experienced a lot less of this behavior since moving to the 1.20 radio ROM...
I'm at the 1.20 radio, and I'm still having the problem.
I too am having exactly this problem. I have flashed the Cingular 1.34 ROM but it seems that the ROM doesn't matter. (I notice the bluetooth and or wifi lights are still on, the screen just doesnt come back to life).
Hi, you probably already tested this, but your device goes into standby mode with WiFi on it will become locked and unable to power on.
But it has happenned to me this sympton without WiFi connected.
Cheers
check out this search...there are a few topics on this already
http://forum.xda-developers.com/search.php?searchid=192877
Well I used to think there was some truth to the freezing being related to certain apps... and I suspected on mine it was PhoneAlarm causing problems.
Last week I hard reset and re-installed everything except PhoneAlarm but am having freezing if my TyTN is not used for some time (does not have to charge to freeze!)... And yes, I do kill ActiveSync and WiFi when I know I will not be using my phone for a while. My conclusion is that there's more to this and that maybe a newer ROM from HTC will address this - anyone know what the status is on this??
BTW, anybody else having alarms going off constantly on re-boot or MS VC reading out ca. 2 weeks of appointments on soft re-boot?
I still don't think there is a definitive answer on this. I've heard quite a few things to fix it; but I don't really have any of the software that's mentioned. Someone said it was because I had Opera installed (so I uninstalled it), then someone said it was because of the ActiveSync Advanced Network Connection option (I unchecked that), last someone said it was because of SBSH PocketWeather, and to take that off the today screen. Well I'd rather not do the latter, so I'll test these two and see how it goes.
I think it's the today plug-in issue. I hard reset and left off PW and it didn't lock-up for 2 days. But like you, I like it a lot.
So I'll deal with resetting it.
For me, it's just Pocket Plus, Resco File Explorer and WA Lite on the Today screen along with the standard stuff .. really nothin that needs to connect to the connect to the internet .. and still ..
The one that caused the TyTn not to wakeup was Wisbar Advance. Since removing it, I've not had any issues with the pda not waking up from power off.
Ok, what are you using in its place?
Well after uninstalling Opera, and unchecking the check box; I had the problem again! ( So annoying (.
Well i'll post my problem too
I have missed class twice in a week because the phone alarm never rang in the morning. The phone was frozen and i had to reset it in both cases. I always leave it charginf over night and now i'm afraid to turn it off anymore for fear of never waking me up in the morning
Adi
guys,
I am suspecting the issue is related to the today's plugin. After a few days of experiments, I believe the battery level reading utilities such as SPB pockets plus or Resco today plugin might be the one we are looking for.
Not only uncheck it, but also un-install it, hopefully, would help to solve the problem.
Mark
I have no today's plugin, just the standard stuff, en i do have the same problem
Give the Fake Server Trick a try, which worked for similar symptoms on the old Axim x51v: http://www.aximsite.com/boards/showthread.php?t=112638
If your problems are caused by the same thing, then this is to do with Activesync launching itself automatically. This in turn causes windows mobile 5 to stop waking up from standby, requiring a soft reset. No idea why.
I did the FST straight away when I received my TyTN and I don't get any of the problems you describe at all. It's worth a go!
Hi,
Had this problem on my Hermes where the backlight timeout is always reset to 10secs no matter what i set it to once i perform a soft-reset (by poking the reset hole at the bottom). I've tried editing the registry entry directly, flash back to the manufacturer's default ROM etc but with mixed results.
What eventually worked for me is this:
Change your backlight settings but soft-reset using software instead of poking the reset hole. I used Tweaks2k2 to perform the soft-reset but any other tool should work.
In case you are wondering what is my registry type -- i'm already using a File-based registry rather than Hive. (see http://forum.xda-developers.com/showthread.php?p=767833 for more info).
Anyone has any alternative solutions that works?
cheers!
Patrick
Hi Patrick... bizarre -- my device exhibits the same annoying reset to 10-seconds, but only when using software reset, not hardware. What software are you using to soft reset? I've used both PHM Reset.exe and Wisbar Lite v1.1.0.7...
If I use the stylus to soft-reset, then the 'on battery' backlight timeout remains at 1-minute (where I like it).
I wondered what in the hell was causing this. A few searches couldn't find it.
I thought it was high cpu usage or something..
aquanaut88 said:
Hi Patrick... bizarre -- my device exhibits the same annoying reset to 10-seconds, but only when using software reset, not hardware. What software are you using to soft reset? I've used both PHM Reset.exe and Wisbar Lite v1.1.0.7...
If I use the stylus to soft-reset, then the 'on battery' backlight timeout remains at 1-minute (where I like it).
Click to expand...
Click to collapse
Hi aquaut88,
Hmm, that's interesting. I have the opposite effect when i use soft reset via hardware. I'm using Tweaks2k2 for my soft-reset now. Did you check ur registry type setting (hive vs file) to see if that makes a diff?
It was set at (1). I changed it to (0) and still same behaviour, so switched it back to (1). It seems to have to do with something installed (Maybe Resco Explorer?) Cheers
aquanaut88 said:
It was set at (1). I changed it to (0) and still same behaviour, so switched it back to (1). It seems to have to do with something installed (Maybe Resco Explorer?) Cheers
Click to expand...
Click to collapse
Hmm.. I have Resco Explorer installed too. Doesn't seem to be the culprit here.
I had the same problem until I removed Voicecommand 1.6.
When I loaded Voicecommend 1.6 to my 8525 it did something that re-locked my Ext Rom and was causing serval other problems like the backlight changing back to 10 sec. I am not sure if it was all the hacks I had to make to make VC 1.6 work or a semi-failed install.
But I finally hard reset my phone and reloaded everything but used Voicecommand 1.5 and have not had the problem since.
i also have this problem. but i am not sure what causes it.
it is a strange problem, after a hard reset my backlight settings remain as what I selected it to be. be after i install some apps, then the problem arises. I am not sure of which app(s) cause the problem. to find out i have to install each app after a HR and test to islate the culprit.
8525 - 10sec backlight problem also.
Having the SAME EXACT problem guys! My 8525 is also constantly switching back to a 10sec timeout on the backlight display. I do have Resco Explorer too, but I doubt its the problem. I've been reseting w/ the bottom-hole, but will try doing it via software.
Does anyone else have any real fixes though? This is making me CRAZY!!!
This seems related to restoring from a backup. It has happened to me twice after restoring from SPB Backup on my Universal.
The first time I hard-reset and reinstalled everything. The problem went away.
This weekend I had to restore from backup after a freeze and the problem came back (but not immediately). I think it occurs after a backup and after changing settings in the Settings applets (not sure which one).
I think it is a error in the driver. I get a related problem with the brightness. One of my own programs sets the brightness but strangely after a while it always goes back to the 3rd bar. It makes no difference if I lower the brightness using the backlight control, it will always end up on 3. If I make it brighter it seems to stay where I put it.
ChristopherTD said:
This seems related to restoring from a backup. It has happened to me twice after restoring from SPB Backup on my Universal.
The first time I hard-reset and reinstalled everything. The problem went away.
This weekend I had to restore from backup after a freeze and the problem came back (but not immediately). I think it occurs after a backup and after changing settings in the Settings applets (not sure which one).
Click to expand...
Click to collapse
I concur. While not using Hermes, I am using a Samsung SGH-i607 (Blackjack) and after having to restore a back-up from Sprite, I started having this same issue. From everything that I have read, it seems that a hard reset and starting from scratch is the only true fix.
What good are the back-up programs if they leave your phone in this state? Kinf of sucks not feeling safe about being able to restore a back-up in the even it is needed.
i have been using battery status to fix my timeout at 30 seconds.. fixed my problem
shogunmark said:
i have been using battery status to fix my timeout at 30 seconds.. fixed my problem
Click to expand...
Click to collapse
Thats what did it for me too.
I have the same broblem. after "spb backup" restore backlight timout goes to 10sec. I had the same problem before on anotrer wm6 rom, and it starts after "spb backup" system restore too
I was just getting ready to hard reset my 8525, but before I uninstall Spb Backup from my SD and install new version (v1.6.3) on device memory to properly save my data, and ........?? problem disapears with it self..
I think problem was in non proper intsallation of backup program (on Micro SD).
now averything is ok without any hard reset
it keeps working normally only if I turn off device without lock.....
Following installation Backlight stuck @ 10sec WM v6.1
Thank you, downloaded latest Tweak2k2, installed and selected soft reset.
Backlight setting now perfect
“Contingency WM6.1 Backlight stuck at 10sec”.
Tried Trial version Tweak2k2 PPC Soft Reset and three attempts recognise this is only a temporary solution to "Contingency WM6.1 Backlight Stuck at 10sec” .
Telephoned HTC UK service, Sebastian says that If a hard reset fails to correct backlight contingency Kaiser will have to go to repair. Sebastian says that HTC do not provide Registry settings and customers that do change registry settings negate their warranty.
Request transfer to supervisor. Dan head of support says that I am the first customer with this contingency and that I need to do a hard reset and if contingency continues the Kaiser will need return to HTC for repair.
PS Thankfully HTC do not sell cars or bicycles as they would also say mending punctures negated the car or bicycle warranty!
Hi,
i have everytime the problem that when i turn the ameo off,
it freeze when i turn it on, this is randomly so i cannot figure out
when this is happends, after soft reset it works again.
Is there a way to find out where the gab is?
tried to close every open application so far, and turn the most
used on after turn of the device.
I'll hope to find out otherwise i need to to the hard reset
(it took that serveral hours to install al again .
thanks
tvrman said:
Hi,
i have everytime the problem that when i turn the ameo off,
it freeze when i turn it on, this is randomly so i cannot figure out
when this is happends, after soft reset it works again.
Is there a way to find out where the gab is?
tried to close every open application so far, and turn the most
used on after turn of the device.
I'll hope to find out otherwise i need to to the hard reset
(it took that serveral hours to install al again .
thanks
Click to expand...
Click to collapse
Hi tvrman.
For starters, install Sprite backup (on one of the CD's you got with the Ameo). This will eradicate the need for a full install after a hard reset in the future!
I suggest you do a full hard reset anyway then install Sprite Backup utility.
Only put back your essential apps one by one with 1/2 a days gap between each installation and test the turn off turn on function.
Be sure to use the supplied X-Button application to ensure you properly clode apps down after you're finished with them....or use Wisbar Advance 2, which will do it for you....except for Active Sync (this will always remain active unless shut down manually in memory menu).
I have not once suffered the problem you have in over a months use of the Ameo....might be a faulty unit or a buggy ROM. What version ROM are you using?
Anyway, if all goes well over the next 3 days, do a full backup and save a copy to your storage card or micro drive and be sure to copy a copy over to your PC...that should future peoof you having to do a full install again in the future. And be sure only to back up, if you have no problems with the device and the problems you mentioned earlier. Otherwise you will allways restore the bugs in the device after a hard reset.
Hope this helps. keep us updated on how you get on.
Mackaby007
thanks for you professional answer, i was not aware that spd backup
was on the cd which was delivered at the ameo.
Well yesterday i found out that one of the programs (profimail)
which i'm using serveral times a day for my mail, that this is the problem
I found out that yesterday i didn't use profimail but the built in mail the
whole day and the ameo did not freeze at all the whole day
tried to turn it off an on the whole day and no problems at all,
yesterday late i start profimail and check serveral mails, i close profimail
and turn the device off, later turn it on and a black screen it would not
turn on
After soft reset everthing works.
So i will check today again without using profimail and see what's happends
again.
i'll let you know....
hi,
I had the same problem.
My solution was to format the mini-sd card.
So what i did:
1. copied all data on de minisd in a cardreader to a directory on pc
2. Formatted (not quick) the minisd
3. Copied all data back to the minisd.
All the tests I have tried suggest it is Wisebar Advance 2 that is causing the freezing.
Anyone else find this? Shame as it is the program I like the most
Robert
tvrman said:
Hi,
i have everytime the problem that when i turn the ameo off,
it freeze when i turn it on, this is randomly so i cannot figure out
when this is happends, after soft reset it works again.
Is there a way to find out where the gab is?
tried to close every open application so far, and turn the most
used on after turn of the device.
I'll hope to find out otherwise i need to to the hard reset
(it took that serveral hours to install al again .
thanks
Click to expand...
Click to collapse
Have you got a password to lock your phone try removing that see if it still locks , i was having the same issue
Mrsums said:
All the tests I have tried suggest it is Wisebar Advance 2 that is causing the freezing.
Anyone else find this? Shame as it is the program I like the most
Robert
Click to expand...
Click to collapse
No such issue here! WA2 runs like a dream on my Ameo...even better than it did on my Hermes or Prophet! I'm using the 2.8.0.2 version of WA2 without WAD.
WA2 + WAD
Yes, in my case it was also WA2. I made my own skin and all work fine. But in time I got more lock-ups. So I decided to reinstall everything. Then things went wrong. That day I have installed everything 6 times. Every time I had lock-ups when I pushed the power button and activated it again. But after disabeling WA I had no troubles anymore. The last production and beta version have the same problems. At this point I have to advice not to use WA2. I did not examine every feature of WA2. So there can be one feature that caused the problem. I made my own iPhone landscape skin and I was very pleased. Could somebody try this skin to see if it freezes their device?
skin
iPhone skin ftp://xda:[email protected]/Uploads/Software/iPhone.rar
I use a lot of apps. I also use the following plugins on WAD:
SPB Diary
Profiles for Windows Mobile
Windows Life Messenger
QAN said:
Yes, in my case it was also WA2. I made my own skin and all work fine. But in time I got more lock-ups. So I decided to reinstall everything. Then things went wrong. That day I have installed everything 6 times. Every time I had lock-ups when I pushed the power button and activated it again. But after disabeling WA I had no troubles anymore. The last production and beta version have the same problems. At this point I have to advice not to use WA2. I did not examine every feature of WA2. So there can be one feature that caused the problem. I made my own iPhone landscape skin and I was very pleased. Could somebody try this skin to see if it freezes their device?
Click to expand...
Click to collapse
I'll give the skin a test run in an hour, but I refuse to use plug-ins again. They have always caused me problems, but WA2 never has. What version were you running?
Tried the i-phone skin and have experienced no issues whatsoever.
Maybe the Problem is WAD and your plug-ins.
WAD keep on giving problems like this...it's a sin for such an interesting application...here it is because I gave up to use it.
Mrsums said:
All the tests I have tried suggest it is Wisebar Advance 2 that is causing the freezing.
Click to expand...
Click to collapse
I did some searching and found some suggestions it might be the skin I was using. I changed the skin and no more freezing.
Robert
trayap.exe
Since I removed the trayap.exe from the init part of the registry I did not have any freezing anymore. I will try WA2 again to see if this solves my problem.
By the way, I am using the latest beta's of WA2 and WAD
hi all
i find that if i use the off button to turn off the backlight whilst media player is running it jams the machine, requiring a reboot. i know that i can usethe light button on the keyboard but i sometimes forget that media player is running (ie. paused).
I have the same freezing problem now after a few weeks of usage.
The device was running very nicely but now, without installing anything further or adding anything to the device, it freezes randomly.
It likes to freeze when the backlight goes off, while I play MP3 files or have a phone conversation using bluetooth.
In the past 4 days I have softreset the device no less than 81 times.
I suspect the Microdrive is to blame. Is it sensitive to movement?
I will remove all my software and other files from the microdrive and see if things improve.
In the mean time, has anyone else experienced random and frequent freezing?
Oh, I have the Dopod U1000 branded device with the latest firmware.
ok, I had it with this. 16 more soft resets within 4 hours.
I hard reset the device. So far I see no random freezing, but I didn't install anything extra yet except ozVGA and VJBigPhone. And both of them on the internal memory, so nothing on the microdrive.