Hey guys,
of course AS 4.1 is rubbish, so I found a good alternative in SPB backup. However, it's supposed to soft reset after backup (I scheduled a daily backup), but sometimes it just hangs the OS. When this happens I cannot get any incoming calls or messages until I SR myself.
Anyone has that too?
Thanks!
At first I was having this same problem. I'd wake up every morning (setting my phone to backup at 1am) with the thing completely hung up and almost out of battery power.
I switched to having it not soft reset, had that run for a couple of days, and then I switched it back to soft reset. In the 3 days since I've done that it hasn't hung up - and has successfully soft reseted itself.
I don't know exactly what the problem was.
CameronJ said:
At first I was having this same problem. I'd wake up every morning (setting my phone to backup at 1am) with the thing completely hung up and almost out of battery power.
I switched to having it not soft reset, had that run for a couple of days, and then I switched it back to soft reset. In the 3 days since I've done that it hasn't hung up - and has successfully soft reseted itself.
I don't know exactly what the problem was.
Click to expand...
Click to collapse
Thanks for sharing man. I had the same drill, (a few days without SR, then back again) but after a while it started to hang again. I think there might be a registry solution for this or a software conflict to resolve, but that's beyond my PDA knowledge. I was hoping the experts here would save the day...
Me too
I'm having the same problem (and alas started another thread before I found this one) and have turned off the reset feature as well. I'm using skschema to perform the soft reset.
Hello, guys!
Could some of you post a bug report about that at http://www.spbsoftwarehouse.com/products/backup/askquestion.html?en? SPb team always answer very promptly. and they will for sure fix it in the next release.
i also have this problem.
no SR problem here on AKU2. I'm running the Qtek rom.
cBorisa said:
Hello, guys!
Could some of you post a bug report about that at http://www.spbsoftwarehouse.com/products/backup/askquestion.html?en? SPb team always answer very promptly. and they will for sure fix it in the next release.
Click to expand...
Click to collapse
I did this.
Related
I have a strange problem that started this afternoon. Whenever I put my phone into sleep mode (either manually or thru timeout) and then wake the phone up again; the backlight is set to off.
I have to go to the Start --> Settings --> Backlight and turn it on again. That works ok, but once the phone shuts itself down the backlight defaults again to off.
Anyone know why, or how to fix?
Many thanks
Do you have an old version of spb pocket plus ? if yes update it... this was the problem for me...
I had the same problem, except mine was stuck at 10secs. But in actuality, when I timed it, it was more like 7secs. I could not figure out what the problem was an ended up with a hard reset.
This happened to me after I installed a backup from SPB Backup. Strange indeed.
the only spb product I have is spb time. I will try and fix today at work but can feel a hard reset coming. thanks for the replies.
Funny, I have the exact same problem since 5 days, it started on the day I installed spb GPRS monitor. Something wrong with ALL spb products ?
Alas, could not find root cause of the problem so I did a hard reset and all its working fine now.
Hi,
i have everytime the problem that when i turn the ameo off,
it freeze when i turn it on, this is randomly so i cannot figure out
when this is happends, after soft reset it works again.
Is there a way to find out where the gab is?
tried to close every open application so far, and turn the most
used on after turn of the device.
I'll hope to find out otherwise i need to to the hard reset
(it took that serveral hours to install al again .
thanks
tvrman said:
Hi,
i have everytime the problem that when i turn the ameo off,
it freeze when i turn it on, this is randomly so i cannot figure out
when this is happends, after soft reset it works again.
Is there a way to find out where the gab is?
tried to close every open application so far, and turn the most
used on after turn of the device.
I'll hope to find out otherwise i need to to the hard reset
(it took that serveral hours to install al again .
thanks
Click to expand...
Click to collapse
Hi tvrman.
For starters, install Sprite backup (on one of the CD's you got with the Ameo). This will eradicate the need for a full install after a hard reset in the future!
I suggest you do a full hard reset anyway then install Sprite Backup utility.
Only put back your essential apps one by one with 1/2 a days gap between each installation and test the turn off turn on function.
Be sure to use the supplied X-Button application to ensure you properly clode apps down after you're finished with them....or use Wisbar Advance 2, which will do it for you....except for Active Sync (this will always remain active unless shut down manually in memory menu).
I have not once suffered the problem you have in over a months use of the Ameo....might be a faulty unit or a buggy ROM. What version ROM are you using?
Anyway, if all goes well over the next 3 days, do a full backup and save a copy to your storage card or micro drive and be sure to copy a copy over to your PC...that should future peoof you having to do a full install again in the future. And be sure only to back up, if you have no problems with the device and the problems you mentioned earlier. Otherwise you will allways restore the bugs in the device after a hard reset.
Hope this helps. keep us updated on how you get on.
Mackaby007
thanks for you professional answer, i was not aware that spd backup
was on the cd which was delivered at the ameo.
Well yesterday i found out that one of the programs (profimail)
which i'm using serveral times a day for my mail, that this is the problem
I found out that yesterday i didn't use profimail but the built in mail the
whole day and the ameo did not freeze at all the whole day
tried to turn it off an on the whole day and no problems at all,
yesterday late i start profimail and check serveral mails, i close profimail
and turn the device off, later turn it on and a black screen it would not
turn on
After soft reset everthing works.
So i will check today again without using profimail and see what's happends
again.
i'll let you know....
hi,
I had the same problem.
My solution was to format the mini-sd card.
So what i did:
1. copied all data on de minisd in a cardreader to a directory on pc
2. Formatted (not quick) the minisd
3. Copied all data back to the minisd.
All the tests I have tried suggest it is Wisebar Advance 2 that is causing the freezing.
Anyone else find this? Shame as it is the program I like the most
Robert
tvrman said:
Hi,
i have everytime the problem that when i turn the ameo off,
it freeze when i turn it on, this is randomly so i cannot figure out
when this is happends, after soft reset it works again.
Is there a way to find out where the gab is?
tried to close every open application so far, and turn the most
used on after turn of the device.
I'll hope to find out otherwise i need to to the hard reset
(it took that serveral hours to install al again .
thanks
Click to expand...
Click to collapse
Have you got a password to lock your phone try removing that see if it still locks , i was having the same issue
Mrsums said:
All the tests I have tried suggest it is Wisebar Advance 2 that is causing the freezing.
Anyone else find this? Shame as it is the program I like the most
Robert
Click to expand...
Click to collapse
No such issue here! WA2 runs like a dream on my Ameo...even better than it did on my Hermes or Prophet! I'm using the 2.8.0.2 version of WA2 without WAD.
WA2 + WAD
Yes, in my case it was also WA2. I made my own skin and all work fine. But in time I got more lock-ups. So I decided to reinstall everything. Then things went wrong. That day I have installed everything 6 times. Every time I had lock-ups when I pushed the power button and activated it again. But after disabeling WA I had no troubles anymore. The last production and beta version have the same problems. At this point I have to advice not to use WA2. I did not examine every feature of WA2. So there can be one feature that caused the problem. I made my own iPhone landscape skin and I was very pleased. Could somebody try this skin to see if it freezes their device?
skin
iPhone skin ftp://xda:[email protected]/Uploads/Software/iPhone.rar
I use a lot of apps. I also use the following plugins on WAD:
SPB Diary
Profiles for Windows Mobile
Windows Life Messenger
QAN said:
Yes, in my case it was also WA2. I made my own skin and all work fine. But in time I got more lock-ups. So I decided to reinstall everything. Then things went wrong. That day I have installed everything 6 times. Every time I had lock-ups when I pushed the power button and activated it again. But after disabeling WA I had no troubles anymore. The last production and beta version have the same problems. At this point I have to advice not to use WA2. I did not examine every feature of WA2. So there can be one feature that caused the problem. I made my own iPhone landscape skin and I was very pleased. Could somebody try this skin to see if it freezes their device?
Click to expand...
Click to collapse
I'll give the skin a test run in an hour, but I refuse to use plug-ins again. They have always caused me problems, but WA2 never has. What version were you running?
Tried the i-phone skin and have experienced no issues whatsoever.
Maybe the Problem is WAD and your plug-ins.
WAD keep on giving problems like this...it's a sin for such an interesting application...here it is because I gave up to use it.
Mrsums said:
All the tests I have tried suggest it is Wisebar Advance 2 that is causing the freezing.
Click to expand...
Click to collapse
I did some searching and found some suggestions it might be the skin I was using. I changed the skin and no more freezing.
Robert
trayap.exe
Since I removed the trayap.exe from the init part of the registry I did not have any freezing anymore. I will try WA2 again to see if this solves my problem.
By the way, I am using the latest beta's of WA2 and WAD
hi all
i find that if i use the off button to turn off the backlight whilst media player is running it jams the machine, requiring a reboot. i know that i can usethe light button on the keyboard but i sometimes forget that media player is running (ie. paused).
I have the same freezing problem now after a few weeks of usage.
The device was running very nicely but now, without installing anything further or adding anything to the device, it freezes randomly.
It likes to freeze when the backlight goes off, while I play MP3 files or have a phone conversation using bluetooth.
In the past 4 days I have softreset the device no less than 81 times.
I suspect the Microdrive is to blame. Is it sensitive to movement?
I will remove all my software and other files from the microdrive and see if things improve.
In the mean time, has anyone else experienced random and frequent freezing?
Oh, I have the Dopod U1000 branded device with the latest firmware.
ok, I had it with this. 16 more soft resets within 4 hours.
I hard reset the device. So far I see no random freezing, but I didn't install anything extra yet except ozVGA and VJBigPhone. And both of them on the internal memory, so nothing on the microdrive.
hi all
Problem has occurred suddenly after using the device for 10 days
The Vibration does not work
I've tried hard reset
And still does not work
Are there any recommendations​
dito
I havn't hard reset my device because I still have quite a few applications I am testing, but I have the same problem.
No vibration at all, in any application. I thought it was because of the combination of applications that I have installed which included advanced config, hd tweak, mobilmagic button stuff and .net framework. I would have thought that a hard reset back to original ROM would do it but, maybe upgrading to a different ROM? Another thread I saw said he hard reset the device more than once and soft reset and messed with .net framework and got the vibration to work. I hope some of this helps, please post back if problem solved and with things you've tried. And if anyone happens to know why an end key would stop ending calls, let me know!, lol
Thanks
wiaza100 said:
hi all
Problem has occurred suddenly after using the device for 10 days
The Vibration does not work
I've tried hard reset
And still does not work
Are there any recommendations​
Click to expand...
Click to collapse
aye.
i had a similair problem with vibrate, but it was out of the box. so ive come to the conclusion its a hardware issue and am sending it back.
im sorry i cant be of more help - and hope you can get yours going.
got a htc phone and my phone keeps freezeing i need to take the battery out then put it bk in to get my phone it keeps happening alot. took it to a shop and they say they reflashed but it didnt work any body got any ideas thanks
First of all, while the phone is working.. BACKUP all data.
Then try this...
Hardreset (I don't see any other solution).. then RESTORE data.
If the above post doesn't work, then maybe you should have that unit replaced while it's still under warranty (I assume)...
I also experienced the same a while ago. All of a sudden, after 2 weeks of using, it hung. The only thing I did was having it a day connected to the internet and loading 150 emails into the newly created account. I experienced a slower operating system, though, and the hanging of the Jade could be linked to this full inbox.
Btw. no additional software installed or tweaks. At that time, I only had NoData installed and TomTom.
For some reason, when the backlight went off, the wake up hard button on the Jade didn't function either, so I had to take out the battery every time to make a call. Rediculous...
The solution for me was indeed to hard reset. Soft resets or configuration chagnes didn't work. After the hard reset, no problems anymore...
Okay, so yesterday i installed Skyfire and SPB Insight. It was allright, reboot was fine, but i didn't like the software so i uninstalled them.
After that, the phone works fine, then i reboot it and it just doesnt reboot. It passed the SE logo, Xperia splash, and the Windows Mobile Logo. It then stops while loading my today plugin. Nothing i can do about it.
I reset it through the reset button, and it only managed to load my phone 1 time out of 5 reboot. By now im thinking that it there were conflict with my plugin after that uninstall so i just Hard Reset my phone, and load the backup from SPB (only contact, task, email and messages, no program)
It then goes well, until the problem happened again
I had less software installed (didn't use a lot of it last time around) and all the software i have now was just fine when i had them installed in my phone a while ago. So whatever the problem was, it survived through hard reset. Unfortunately
I suspect this has something to do with today screen. All plugin that i have now (added one) are SPB Wireless monitor, SPB Backup, Beejive. I only use SPB wireless as my plugin, the rest is not.
So what should i do now? What might be the problem? Im on R1A, so i suspect it might be a bug, and im hanging on to wait till R3A comes out...or should i just flash custom ROM?
If anybody could shed some light on this, i would be very gratefull.
Regards
Sheen
give the battery the full " charge "
Have you checked |START|SETTINGS|PERSONAL|TODAY|ITEMS| to make sure your today screen items are checked?
@lakeg
Full charge?
Its not about the battery....the phone has no problem with hardware, it just stucks in that today screen unable to load the plugin
Any idea?
buzz83 said:
Have you checked |START|SETTINGS|PERSONAL|TODAY|ITEMS| to make sure your today screen items are checked?
Click to expand...
Click to collapse
Yes, i did unchecked the Skyfire and SPB insight before i uninstalled them.
After Hard Reset i only have the Date, SPB Wireless, Messages, Calendar, and Lock device checked.
Also i might add, after i unsinstalled them my today screen was behaving weird. The today items that i use was swapping order, i tried to change them around again, soft reset, and the problem happened
Edit: Totally off topic, u live in Newcastle mate? i use to live there in Jesmond
mr_sheen said:
After Hard Reset i only have the Date, SPB Wireless, Messages, Calendar, and Lock device checked.
Click to expand...
Click to collapse
If you are still having problems after a hard reset (|START|SETTINGS|SYSTEM|CLEAR STORAGE|) there might have been a change to your registry which is stuffing things up. Might be best to reflash your rom or flash a new one (Touch-It 7.1 is great!)
Edit: Totally off topic, u live in Newcastle mate? i use to live there in Jesmond
Click to expand...
Click to collapse
Yep. I live in Stockton but work in Hamilton. Its a small world
buzz83 said:
If you are still having problems after a hard reset (|START|SETTINGS|SYSTEM|CLEAR STORAGE|) there might have been a change to your registry which is stuffing things up. Might be best to reflash your rom or flash a new one (Touch-It 7.1 is great!)
I did the hard reset via the hardware button method. Is there any different with the Clear Storage method?
And correct me if im wrong, but through hard reset isn't that means that we "reset" everything back to factory state? i mean the registry should just be reset back to default isn't it?
I'll hang on a bit while waiting for R3A, if it doesn't come out in 2 weeks or so i'll probably flash one of itje's ROM...but again, how about the change in registry that stuffed my phone up?
confusing
Click to expand...
Click to collapse
Click to expand...
Click to collapse
Not sure if it makes any difference what so ever. I also don't know if registry changes revert back after a hard reset. It just seems odd that you are still having issues after a hard reset...
Anyway... nothing a new rom won't fix.
Goodluck with it
buzz83 said:
Not sure if it makes any difference what so ever. I also don't know if registry changes revert back after a hard reset. It just seems odd that you are still having issues after a hard reset...
Anyway... nothing a new rom won't fix.
Goodluck with it
Click to expand...
Click to collapse
alrighty then, thanks for ur help then mate
just an update on my problem,
It seems that the culprit behind it all is my provider. Yes, u read it right...the provider. My Cellular provider has been having problem lately with their services. Dropped calls, late sms, and most annoying of all a slow/barely useable internet conection. The signal would shows that its fine, but in reality it doesn't. It just shows that i have signal but the network sometimes doesnt work.
This i think might be the problem why my phone stuck on today screen. It sometimes shows that i have no signal and then just freeze, or it sometimes shows that i have signal but freeze anyway. My solution to this is that i put my phone into flight mode every time i want to soft reset it, no problem so far....it goes away smoothly into the today screen.
i'll keep u guys updated if this method fails
Nope...it still doesnt work...
i hard reset my phone twice today because the problem still persist....its driving me nuts
Can anybody help? please....
All i can do now is wait patiently for R3A and hope it'll fix this problem....if not, im giving up on my X1...so frustrating...