Hi
I have just got a new MDA Vario. I have successfully unlocked it as you told me I have intsalled some new programs but after it crashed I had to soft reset it and it boots ok but I cannot access any of the programs it had, not even the contacts It comes with a start menu with only today and and a file named colint. I have tried for several time a hard reset but it stays the same . I am very worried as It was a mobile I always wanted but now it does not want to work please help me I am stucked.
Thks[/b]
Related
Hello,
I have MDA compact, i have installed a program called Battery Pack 2003 into the main memory, after installation i restarted my MDA but now its not booting up, it stuck on first screen, any idea how can i get away with this ? and how can i remove this installed program ?
Thanks
last way to hard reset
Please has anyone had this problem, I know its old hat now but I just want to have 2003 on the phone, I can load 2002 no worries, works every time without fail but if I load 2003 it always gets stuck at boot up, I have tried a few different roms and all the same problem, I even tried 2003SE over 2002 through activesync and the same problem. I use sd to upgrade and all seems fine until boot up after the rom has finished loading.
I have spent hours searching the internet and nothing.
Any advice would be awesome......
stuck on boot screen
Have you tried just leaving it alone for up to an hour ,i have had a similar problem on my wallaby (O2 XDA) and i left it as i had to go out and when i got back in it was waiting for me to set the screen etc. If you then go into explore on microsft sync and go to the windows\startup folder u can see what programs it is loading that your device doesn't like. If it doesn't solve the problem then at least you have tried
stuck on boot screen
Have you tried just leaving it alone for up to an hour ,i have had a similar problem on my wallaby (O2 XDA) and i left it as i had to go out and when i got back in it was waiting for me to set the screen etc. If you then go into explore on microsft sync and go to the windows\startup folder u can see what programs it is loading that your device doesn't like. If it doesn't solve the problem then at least you have tried
I have left it for two days but yes anything is worth a try. What I can't understand is I had 2003 and 2003se on it about a year ago, then someone borrowed the phone for about a 10months and wrecked it and it wouldn't work so redid the 2002 rom and it worked but I have never been able to get 2003 or 2003se it boot from boot screen, it not my boot loader is it? I have 5.15
Thanks for the help
Well try this
It seems very strange indeed but i have had problems reloading all sorts of roms back into my wallaby,even the original o2 rom wouldnt boot for me and i had to reinstall 2003se ,which worked fine so i have the complete opposite of what you have.I.e. i can put 2003se on it but i cant put 2002 back on :shock: The only other thing i can think of is that maybe its the version of rom that you are trying to install?
I have a Prophet (M600) G4 with the last HTC ROM and recently radio upgrade and everything works fine till in installed Resco keyboard and had to soft reset the device. Till then the device comes up normally with the Qtek welcome screen but during the next step to “the windows screen ??” appears a white screen and nothing happened after it. Strange enough hardreset don’t work and its impossible to enter the bootloader. Moving the battery and reset several times has no results. Try to flash it again but impossible because I have no connection to PC. Can someone help me please??
Help! My Dopod D810 dead, can only run bootloader
All ROM I tried are not accepted by bootloader. What can i do?
fuego_nl said:
I have a Prophet (M600) G4 with the last HTC ROM and recently radio upgrade and everything works fine till in installed Resco keyboard and had to soft reset the device. Till then the device comes up normally with the Qtek welcome screen but during the next step to “the windows screen ??” appears a white screen and nothing happened after it. Strange enough hardreset don’t work and its impossible to enter the bootloader. Moving the battery and reset several times has no results. Try to flash it again but impossible because I have no connection to PC. Can someone help me please??
Click to expand...
Click to collapse
qtek s200- prophet problem please help
After reset work but screen is blank with green and blue lines,can some body help
Hi to all!
I`m new in this forum and ba world.
Last week purchased spv m2000 with wm2003se and simlock. After reading wiki I unlocked SIM, unhided an unlocked EXTRom , resized DOC and upgraded to latest radio rom and wm6 (thx Helmi for great job).
I did also some set up things in wm6, for example password (something like - "if device is unsed for 30 min. you must insert password") same as my PIN.
My battery after whole day of exploring new features and programs became week (10% - you may loss your data..., etc) and I decided to push power button and replace with another one. But I forget that other one is also week (5%). After soft reset and booting wm6 asked me for a password to unlock system - and I was surprised coz wm6 told that password is incorrect - apparently lost all my settings.
Hard reset and boot options helped with sweeping whole system. So I must now install again all programs and patches.
I don`t know if this is normal wm6 behaviour (I`ve read wm6 is data lost proof - this feater was major cause of upgradind) or I did something wrong with switching batteries.
Best regards
I do confirm this problem.
If unlock password was set,after you changed the battery,in the first boot the phone would be No radio,so you should reset it again.Then the problem came,all the password you typed was incorrect,you could not get into the desktop.
Even after you hv hard reset your phone.You will also need to clean the registry,that is incredible.
Can any one figure out it?
It is a serious problem.
Same problem
I have just the same problem that with my PDA2k. I upgraded to WM6 and put in a Phone Password. When I came to reboot the device and enter the password, it was not recognizing it ( tried to hard reset etc but still got stuck on the Password screen no matter what I do?
Any help on this pls pls?????
thanks
MercuryCube
Trinity P3600 have this problem too
Hello, I just got the same trouble on WM6 Trinity P3600 (AXL ROM from 2007-08-30). So possibly this is common DOPOD ROM bug?
Also have the same problem with XDA IIs. Tried to reload the new ROM but the enter password is still there. Any other solution?
Solution Found!
You find the solution here:
http://forum.xda-developers.com/showpost.php?p=1164331
)
Thanks it worked perfectly
100 points !!!!
this is called hard reset it wipes all of your installed software and settings. it is like freshly installed windows
Dear Xplode , what on earth is the reason behind the blocked password and reseted clock if u remove the battery ? ( backup batter working ). Another question , any idea if i can use a 3rd party application replacement for the Lock application ?
Karim.
prophet upgraded with wm6 hv this problem too
One easy tip
Before you replace the battery, turn off security lock on device. Works for me and is not too.... much hassle.
Hello, i've recently bought an used qtek 9100 Phone, with SNE on it.
The phone worked great until i did run a program that were installed on the phone, after i started the program the phone screen went white, and i had to remove the battery. When i turned on the phone agian, the SNE screen appeared and the phone seemed to start normally; though when it went to the: Touch! No Evil text, it wouldn't go any futher and it still won't
Is there any way to format the phone? or what can i do?
I've already tried both of the reset things without success.
Thanks
If both Soft Reset and Hard Reset doesn't work,the only other alternative is to reflash a fresh rom,cuz some program files have corrupted the 'Extended Rom' probably.
Cheers!