Help!! - JAM, MDA Compact, S100 General

Hello,
I have MDA compact, i have installed a program called Battery Pack 2003 into the main memory, after installation i restarted my MDA but now its not booting up, it stuck on first screen, any idea how can i get away with this ? and how can i remove this installed program ?
Thanks

last way to hard reset

Related

Vario hang on first bootscreen

I have just installed SPB Clone correct on my Vario. Now this program did a soft-reset and the Vario just hang on de first bootscreen. (The one with the soft-/firmware version on it.)
SPB Clone has installed a program that would startup at first program while booting. My Vario don't seem to like that.
Is there a way to remove this program/problem without a Hard-reset. I don't like to lose my data.
I had the same problem..
you can only erase all data by installin the rom on top.
boot in USB mode, Hold the camera button and the reset pin and it will start in tree color mode, USB
Than install a rom from the computer... about 10 min.
A.
Do you have more information about that, what it does and how it works.
1) Fist you will have to find a rom update or corrent version of your phone.
I don't know what you have K-Jam or qtek 9100..
K-jam rom you can find at the support site, club i-mate
Qtek:
http://www.beyondthetech.com/blogs/kjam/2005/11/qtek-9100-rom-available-for-download.html
2) Boot the phone in USB Mode: Hold camera batton on the side and with the pen into the reset hole. USB screen will come up.
3) plug USB cable into computer, and run downloaded software.
10 more minutes and reset phone, all done....
Good luck
Clone is very dissapointing, I am using Sunny Backup Manager 3.7 now!
i had this problem too after installing SPB pucket plus. do you have this installed? if so just goto the options and uncheck safe mode and it should boot fine now, obviously wont help you until you have wiped the machine, but it will avoid the same problem again

MDA Vario Problems

Hi
I have just got a new MDA Vario. I have successfully unlocked it as you told me I have intsalled some new programs but after it crashed I had to soft reset it and it boots ok but I cannot access any of the programs it had, not even the contacts It comes with a start menu with only today and and a file named colint. I have tried for several time a hard reset but it stays the same . I am very worried as It was a mobile I always wanted but now it does not want to work please help me I am stucked.
Thks[/b]

Qtek 1010 stays on boot screen after new rom install

Please has anyone had this problem, I know its old hat now but I just want to have 2003 on the phone, I can load 2002 no worries, works every time without fail but if I load 2003 it always gets stuck at boot up, I have tried a few different roms and all the same problem, I even tried 2003SE over 2002 through activesync and the same problem. I use sd to upgrade and all seems fine until boot up after the rom has finished loading.
I have spent hours searching the internet and nothing.
Any advice would be awesome......
stuck on boot screen
Have you tried just leaving it alone for up to an hour ,i have had a similar problem on my wallaby (O2 XDA) and i left it as i had to go out and when i got back in it was waiting for me to set the screen etc. If you then go into explore on microsft sync and go to the windows\startup folder u can see what programs it is loading that your device doesn't like. If it doesn't solve the problem then at least you have tried
stuck on boot screen
Have you tried just leaving it alone for up to an hour ,i have had a similar problem on my wallaby (O2 XDA) and i left it as i had to go out and when i got back in it was waiting for me to set the screen etc. If you then go into explore on microsft sync and go to the windows\startup folder u can see what programs it is loading that your device doesn't like. If it doesn't solve the problem then at least you have tried
I have left it for two days but yes anything is worth a try. What I can't understand is I had 2003 and 2003se on it about a year ago, then someone borrowed the phone for about a 10months and wrecked it and it wouldn't work so redid the 2002 rom and it worked but I have never been able to get 2003 or 2003se it boot from boot screen, it not my boot loader is it? I have 5.15
Thanks for the help
Well try this
It seems very strange indeed but i have had problems reloading all sorts of roms back into my wallaby,even the original o2 rom wouldnt boot for me and i had to reinstall 2003se ,which worked fine so i have the complete opposite of what you have.I.e. i can put 2003se on it but i cant put 2002 back on :shock: The only other thing i can think of is that maybe its the version of rom that you are trying to install?

Startup problems with a M600 need help

I have a Prophet (M600) G4 with the last HTC ROM and recently radio upgrade and everything works fine till in installed Resco keyboard and had to soft reset the device. Till then the device comes up normally with the Qtek welcome screen but during the next step to “the windows screen ??” appears a white screen and nothing happened after it. Strange enough hardreset don’t work and its impossible to enter the bootloader. Moving the battery and reset several times has no results. Try to flash it again but impossible because I have no connection to PC. Can someone help me please??
Help! My Dopod D810 dead, can only run bootloader
All ROM I tried are not accepted by bootloader. What can i do?
fuego_nl said:
I have a Prophet (M600) G4 with the last HTC ROM and recently radio upgrade and everything works fine till in installed Resco keyboard and had to soft reset the device. Till then the device comes up normally with the Qtek welcome screen but during the next step to “the windows screen ??” appears a white screen and nothing happened after it. Strange enough hardreset don’t work and its impossible to enter the bootloader. Moving the battery and reset several times has no results. Try to flash it again but impossible because I have no connection to PC. Can someone help me please??
Click to expand...
Click to collapse
qtek s200- prophet problem please help
After reset work but screen is blank with green and blue lines,can some body help

Qtek 9100 won't start.

Hello, i've recently bought an used qtek 9100 Phone, with SNE on it.
The phone worked great until i did run a program that were installed on the phone, after i started the program the phone screen went white, and i had to remove the battery. When i turned on the phone agian, the SNE screen appeared and the phone seemed to start normally; though when it went to the: Touch! No Evil text, it wouldn't go any futher and it still won't
Is there any way to format the phone? or what can i do?
I've already tried both of the reset things without success.
Thanks
If both Soft Reset and Hard Reset doesn't work,the only other alternative is to reflash a fresh rom,cuz some program files have corrupted the 'Extended Rom' probably.
Cheers!

Categories

Resources