where do i get the XDA manipulator
http://wiki.xda-developers.com/index.php?pagename=XDAmanipulator
Thank you very much LumpiStefan for your timely response and for the link to get the XDA manipulator, i have been looking for it for so long. THANKS DEVELOPERS
I too appreciate the link, I have been searching for this for ages. Cheers.
.......Ib a n e
I really appreciate the link thanks
BR
wallaby usb flashing
hi there ,,can anyone tell why when i enter usb flash mode i cant flash via it wheni try to run a upgrade program it says plug in yor pda and on the pda screen all i get is usb flash mode,,connect usb cable now... but it is lso in my device manager i see my pda as a windows ce devices so what the hell is going on ?
pls dont tell me only way is via sd card surely it can be done via usb lead if so please can some post a step by step on how to flash via usb as i did so already from pc2002 to win2003 using the rom from xda developers and now i get a logo Ozup and underneath says ,,this os image is meant for microsoft employees or technicians bla bla bla
but i can enter boot loader fine access all the menus in bootloder my bootloder version is v5.15
pleaaaase someone help me
There are two possibilities to flash a device:
1. In Bootloader via SD Card
2. Normal booted device via Active Sync
But i do not know what you mean with USB Flash Mode
Stefan
thanks for replying back now i have new problem
i have a big problem and i think your the only person who can help me my problems occured when i went to flash my wallaby device with this rom ftp://xda:[email protected]_ENG.exe/
i wish i never bothered the device was perfectly running fine until i flashed it with this via usb it all was a succes when i done a hard reset i got a screen with a oz up logo and underneath it says "microsoft internal use only" this operating system image is meant for use only by microsoft employees and contractors ,,and the crazy thing is i cannot enter my bootloader which was v5.15 so i can flash it via sd card its vanished no bootloader only that screen and on the bottom right corner it says ,,g32s54,v4.08,3.04 when i plug it in usb all i get is a unknown device and i cannot flash it so please if there is a way even if its pretty technical i would be honoured if you can help me out i would be very grateful if u cn show me a way of getting the bootloader back many thanks
still no bootloader on my wallaby device
hi i,m really upset if i can only get acces to the bootloader i can atleast flash it via sd card so please if theres a way of getting back the bootloader or somehow flashing it back please any help would be appreciated
radio stack
had same sort of problem this is how i fixed it go here
http://wiki.xda-developers.com/index.php?pagename=Wallaby_HT_GSMError
don't use the 4.16 use the rs 4.21 when i did the upgrade i was then able to connect to active sync then changed the rom try the special rom 1.2
hope this helps
mate the problem i have is that i cant acces the bootloader for me to do anything its gone and this happened after using that dodgy rom
all i want to no is there a way of putting back the bootloader on to the device as its not there its been somehow erased after the flash i done
mate if you try what i said to try this should help you to connect your phone back to your pc then you can change the rom from there you shold get bootloader back when you put a new rom on
hi ....please help
everex e500(eten p300) wase ubgraded withe wrong vergion of rom
it started to ubgrade and ubgraded the boot loader form usb donloader 1.5.4
to usb downloader 1.5.4_ce and shoude the ronge rom isuu Ok thin the unit
wase working probuly withe the new bootloader and the olde rom and one
day i for got the ppc at the boot loader screen tel the battrey was dead
and the oberating system rom wase erased now the ppc is poting at the
boot tloader and stopes and i cant install the olde rom bicause the inistaling
softwear is not recognizing my unit you know the system is shoing it as eten
new hard wear i tryied allot of things all around the wep and no help i think
that the easist way is to chang the old rom .bin fil to the temp formate
and place it in the [C:\Documents and Settings\.......\Local Settings\Temp]
fill so please any body knowes how to do this pleas help ihave been
working on this for almost 2monthise and ihave tride almost evrithng i founed
at the net and no help
whats up
hi evry body i wonder if no answer or what im saying is not kleer and thankes
in advanced.........
Hi all experts !!
i m a new be to all this stuff but just wanna ask one question:
I downloaded and flashed my neo ROM with JAMin_WWE_1000925_10009114_11420_ship with TyphoonNBFTool to bypass the vendor ID ...
Now my Neo does not boot at all....although it showes Spl and other version(mine is G4) but freezes on the "imate "window....
is this the end of my new phone ...i m too worried as its a out of the box pc and has no warranty ...
how do i restore my phone back or how do i flash it. at present i m downloading the file From: ftp://[email protected]/Pro...NoVendorID.zip
will this work on my phone ...my phone will not start at all so pls inform me steps by step procedure how do i FLASH a dead NEO
thanks
sory to post this again in this topic but i m really desprate to make it OK
enter bootloader and flash it from there
Thanks
Hey tahnkx man,
i managed to boot my phone again with the bood loader method...
Its again back to life !!
Thanks
Hi ,
I was flashing my jasjam using sspl-herm and a 6.1 rom ,
While upgrading the progress bar reached the end but it stayed saying upgrade in progress , it took too longer than normal and i knew it wouldnt continue so i soft resetted the phone ,
now it's stuck in the splash screen before even the windows loading.
Plz plz plz help....
if you can access bootloader
a) if you dont have hardspl installed already, install it or you're going to be screwed soon.
if you can access bootloader, pop the nbf file onto your microsd <2gb as HERMIMG.NBH insert it into the phone and follow onscreen instructions.
flashing via SD is always a safer bet anyway.
Hey ,
Thnx guys 4 help
1st I tried hard resetting and it didnt work
2nd I DONT have hard spl
3rd I get into bootloader , i plug the usb cable but i cant flash , the ruuwrapper program says error during upgrade , i think it cant access the phone first coz the mobile device icon in my computer is emtpy , second activesync says not connected(although it tries to) and device manager reads an " htc usb sync " drive but no letter or something
Still no luck , any help ??
I think I've got same problem..
It can't run again after splash screen..
Hi , maybe this is not the first time that some one have the same problem but i have try alot to found a solution and i didnt found
i have a HTC p6500 and it was working perfect untill i download a rom from this forum and i install it in the htc , after that when the device restart i get the boot load screen with 4 colors and in it its writen
sedn100
spl-1.08.000
cpld-6
serial *
and im stuck in that bootloader , each time i start the device i only get that 4 colors
when i try to connect the drvice to the computer the word serial at the butt of the device change to USB , so i downloaded another room and i try to install it but when it reach to 1% it say **error 294 invalid vender id** and the device restart and go bac to bootloader mood
so any one could help me plz cus i dont know wat to do
and thanx alot