hi ....please help
everex e500(eten p300) wase ubgraded withe wrong vergion of rom
it started to ubgrade and ubgraded the boot loader form usb donloader 1.5.4
to usb downloader 1.5.4_ce and shoude the ronge rom isuu Ok thin the unit
wase working probuly withe the new bootloader and the olde rom and one
day i for got the ppc at the boot loader screen tel the battrey was dead
and the oberating system rom wase erased now the ppc is poting at the
boot tloader and stopes and i cant install the olde rom bicause the inistaling
softwear is not recognizing my unit you know the system is shoing it as eten
new hard wear i tryied allot of things all around the wep and no help i think
that the easist way is to chang the old rom .bin fil to the temp formate
and place it in the [C:\Documents and Settings\.......\Local Settings\Temp]
fill so please any body knowes how to do this pleas help ihave been
working on this for almost 2monthise and ihave tride almost evrithng i founed
at the net and no help
whats up
hi evry body i wonder if no answer or what im saying is not kleer and thankes
in advanced.........
Related
Hi all experts !!
i m a new be to all this stuff but just wanna ask one question:
I downloaded and flashed my neo ROM with JAMin_WWE_1000925_10009114_11420_ship with TyphoonNBFTool to bypass the vendor ID ...
Now my Neo does not boot at all....although it showes Spl and other version(mine is G4) but freezes on the "imate "window....
is this the end of my new phone ...i m too worried as its a out of the box pc and has no warranty ...
how do i restore my phone back or how do i flash it. at present i m downloading the file From: ftp://[email protected]/Pro...NoVendorID.zip
will this work on my phone ...my phone will not start at all so pls inform me steps by step procedure how do i FLASH a dead NEO
thanks
sory to post this again in this topic but i m really desprate to make it OK
enter bootloader and flash it from there
Thanks
Hey tahnkx man,
i managed to boot my phone again with the bood loader method...
Its again back to life !!
Thanks
Hello Guys,
i am getting crazy witch my ipaq. I downloaded the newest firmware for my uk ipaq. I startet the HP RUU and everything was ok, till my notebook chrashed during the firwmware update....
So my ipaq only hangs on the start screen. What can i do ? I`ve read here in this forum that someone started the SDLoader and the RUU found the ipaq and startet an new update. But i dont get it work, i tried it several times, but my computer doesnt recognize the ipaq ?! (In the Device Manager there is no new usb device)
The Ipaq shows after the SDLoader started: Update Error! Pls Check!
What i doing wrong ? I am getting crazy with this thing !!! Please help, or please can someone give me a tutorial for a noob (i am not one, but now i think i am...) ?
Big THX
P.S.: Sorry for my bad english, i am a portuguese man...
You can check this:
- connect ipaq (running, no matter what error on the screen) to pc, run hp upd utility, try to update
- run SD loader, and the same way - connect to pc, run hp upd
- try hard reset (?)
I hope one of this helps. If no, I have on idea besides hp service.
Regards,
Darek
How i can run the bootloader mode ?
Is this the same as the SD Loader Mode ?
Big THX
I got my baby back, YEAH !
I only flashed the Windows from this Page
http://4pda.ru/forum/index.php?showtopic=79455&st=120
and then Windows-Screen showed up. So then i could install the new firmware again and now everything is ok.
So possible this can help anybody if he bricked his 614c !!
Bye
Hey guys!
I found myself in a little dum situation today.
Tryed flashing my 6815 via pc and it loaded everything.
It downgraded my PBL to version 1.0.1 And loaded totaly different OS on my 6815. I used sp34053.exe for downgrading.
But now I am stuck with this I don't know how to call it OS that is totaly of screen left side is of screen like sombody cuted it.
and I cant upgrade my os via MSD card allso now I can't use USB vith PC cuz it doesn't recognize my device like nothing is connected (6815)
How can I repair this any ideas I know theres lot's of brainacs here so PLEEEEEEASE help me
you might want to try here
http://forum.xda-developers.com/forumdisplay.php?f=296
the 6815 is a rebadged Atom
hi anyone pls help,
i have one imate jasjam, the initial problem is i done a hard reset and the phone reboot and it wont finish running the customise application installation, after that the phone cant detect network, i had run a hard spl into the phone and then try to flash a rom that i download from forum but it only run 11% then stop then i realise that the rom i flash is for htc jasjam not imate jasjam, now my phone can only stay at the boot loader mode, i also try different rom but no luck so i think i ask for your help
here is my device details at the boot loader mode
IPL-1.04
SPL-2.10.01ipro
before i flash it i also cant find any radio rom version in this phone so i guess the radio rom also missing or what just not sure....
i think i flash the htc jasjam wrong model rom even now i flash back the original JASJAM_WWE_1.20.305.3_1.20.305.104_1.07.03.10_ship this error message come out "ERROR [260]: update error" and it ask me to check my usb connection.
i search the forum and few member advice me to use mtty and i did tried that many time it didnt work, another member advice me to use this method "Formate yr memorycard & Unzip attached file in your memorycard named Hermimg.nbh & put yr cell in boot mode & follow screen instructions..........this illl boot yr celll out to boot mode......... " i tried that but the phone always stay at boot mode and no other instructions came out at all so im really lost and just hoping somebody can help me solve this problem...
can anyone pls guide me step by step of how to flash this phone back to normal, your help is much appreciated, many thanks.
Hi, i had the same problem flashing from the SD card. Are you using Vista or Windows7? I tried with Vista Format card, drag and drop renamed image onto sd card. Stuck it in the phone, reset and like you say hangs on bootloader. Then i tried the same thing from my Windows XP laptop, exactly the same format, rename drag and drop and everything works fine. Hope this helps
first i tried with vista then i tried with xp the problem still there, any other idea to solve this problem? thanks anyway for your advice
roms?
G'day, I've only really been reading about roms and these phones for only a few hours but I'm pretty sure that htc jasjam and imate jasjam are one and the same phone i think the said rom are used with all hermes type phones..
thanks and sorry for my ignorance if i'm mistaken
hi ppl sorry post for hellp , but my hd get stop on boot loader it dont pass the smart mobility logo , and loop.
it starts to do this by it self, 1ª it look like dont charge, them gets on loop.
it on stock rom, i never update im. it was original.
1ª i start for update im to the last stock rom RUU_BlackStone_HTC_PTG_1.56.410.0_Radio_52.62.25.34_1.13.25.24_Ship
it did it ok and it get on loop again.
2ª i did HSPLWrapper_Blackstone_156OliNex , so i can use other roms to test
3ª install 1ª Blackstone Premium EDGE V4.3.1 and the same then Blackstone Swift EDGE V4.3.1
and i have the same , the only difference its the boot logo now i have htc smart mibility but it get stopped
any 1 have any idea how can i solve the problem.
at this time i think its an hardware problem but if any 1 have any idea, i will tray any thing, because its not on warranty i will tray any thing first .
sorry for my bad English and thanks in advance.
Edit:
Problem solved
like i think before the flash was with any kind of corruption i think?!!!
i have tray use task 29, but it wasn't working, so i take a last chance option.
i use HSPLWrapper_Blackstone_156OliNex as flasher but instead of 513k ruu_signed.nbh that came with, i use blackSTONEhengeHyPerSlim_4_8 as image to flash, i use this 1 because its short and have all flash "sections" boot , os , radio etc etc.
note the HSPLWrapper_Blackstone_156OliNex i was already flashed , i was the only way i can get coked roms flashed.
Now my blackstone its alive again, i have a little understanding on programming and hardware i did it on my one risk but it work and its a simple trick, and maby hellp any 1 ho have the loop like i was , and only can get in SPL mode.
my Touch HD it was virgin i was never bin flashed or any other kind of change