hello guys & gals, i bought a sandisk 1gb minisd for my wizard this morning, however whenever i put the card in the phone doesnt seem to read it.. any ideas on what one is ment to do? thanks in advanced!
Hi - you did not say which wizard or which rom. Occ they are a bit fussy with the minisd card but if you put it in and out a few times that may do it, check contacts are clean and no fluff in the slot! Check the disk on the pc to see if it will read it and all is well. Some people have had success formatting disk on pc to fat32. If all else fails its a dud and go and get a new one
Related
Today I noticed that the 2GB SD card in my Wizard is not being detected at all. So I tried re-flashing it, and there was no change.
On the About screen, it says "Expansion slot: In use", I'm not sure if this refers to the SD card slot or not. In the Memory screen, it says that there is no SD card installed. If the backlight is off, and I put the SD card in, the backlight will suddenly turn on.
Unfortunately, I don't have a miniSD card reader to see if my computer can pick it up. But is there anything I could try to get the Wizard to read the SD card, before I go out and buy a new one?
did you figure this out? i have the same issue
miniSD card woes
Fellas,
Since one of you mentioned that you don't have an external miniSD reader for your PC, I would recommend trying out Pocket Mechanic Professional. This PPC software will diagnose/format your miniSD cards in your phone.
One very important notice...make sure that your phone doesn't go to sleep while Pocket Mechanic Pro is formatting your miniSD card. If this happens, then the only way to revive your miniSD card would be to format it using your PC...trust me, I learned the hard way.
By the way...this software is not freeware, but I believe you can use the trial for 30 days or so.
Good luck!
Here is the link:
http://classic.pocketgear.com/software_detail.asp?associateid=373&id=12178
Same Problem
I had the same problem, my 2gb sandisk would not read on my cingular 8125 OR my computer... So I called Sandisk and told them what was going on. They ask you to do a ton of different things with you computer and your phone... At the end of it all they said they would send me a new one. I was very excited because I did not register it and I did not have any of the paper work. They have a kick butt customer service hot line
Same Prob. part 2
I forgot to add once I got the new card everything worked just fine.
Hi Guys
I don't post much here and I tried doing a search on this before so if I missed it, PLEASE BE GENTLE WITH ME
My question/problem is that I bought a SanDisk 2.0 gig Micro SD card for the Wing. I started to add stuff to it via the ActiveSync program for the Wing. After awhile though, I received a "not enough memory" type of error message, saying that the "disk is full" and to remove programs before I can add anymore. I checked the storage on the card and I didn't even use a quarter of the storage on the card. I remember that this happened to me with the MDA when I bought a 2gig card and T-mobile told me that they really didn't support 2gig at the time. So I bought a 1gig and the same thing happened.
I figured it was a problem with the MDA. But it's happening on the Wing as well.
I go Tools> Explore Pocket PC> Mobile Windows Device. From there, I click on the Storage Card folder.
I'm only trying to add stuff to the storage card, not run any programs. I am storing themes and 30 second mp3 clips to use as Ring tones and pictures.
When I try copying one of those files from my computer to the Storage Card folder, I receive the following error message:
"Cannot copy xxxxx: There is not enough free disk space.
Delete one or more files to free disk space and then try again".
I called T-Mobile and they could not figure out what was wrong.
Then they said that it could be because I am using a SanDisk card.
Can someone tell me if this is true? Also, how are you guys doing it?
Any info would be greatly appreciated
Any suggestions? Hints?
Any info would be greatly appreciated.
Thanks in advance
Robert
I have a 2 gig micro sd on my wing as well (though it is a Transcend brand) and it has been working fine for me all the time.
Try the card on a card-reader and make sure the card is fine.
Try to use a Card reader! i do not have any solutions if you wish to leave the card in your herald though..
Had the same problems with my 2GB SanDisk, suddenly the free space kept on shrinking.
I deceided to backup my XDA and did a hardreset.
So far I have no problems anymore , but I still can't read the SanDisk with all my cardreaders in the PC on Windows.
Out of 6 (including the built-in in my Notebook) only one can read that card. With Linux I had no problems at all.
Where did you buy Sandisk Memory from is the real question. If you got it from Ebay then chances are you've been had.
No, I bought it from Best Buy. Stupid thing cost me $75.00
I'm going to try that Linux reader and see if that does the trick. If not, what about reformatting the card?
That was another thing. T-Mobile tried walking me through that, but when I tried to reformat it via ActiveSync, I did not have that option when I right-clicked on the Storage Card folder.
lb1xxxx said:
No, I bought it from Best Buy. Stupid thing cost me $75.00
I'm going to try that Linux reader and see if that does the trick. If not, what about reformatting the card?
That was another thing. T-Mobile tried walking me through that, but when I tried to reformat it via ActiveSync, I did not have that option when I right-clicked on the Storage Card folder.
Click to expand...
Click to collapse
Holy Crap! You paid alot for that! Newegg.com for like $25.00 and 3 day shipping sometimes it comes faster. I would order from Newegg and return that one.
I came across the same issue the other day, but unplugging and then plugging my Wing back in solve it.
In case you're interested Transcend is the memory I'm using and so far I'm happy with it. Just wish the Wing had more on-board memory. Program memory gets eaten up so fast.
Hi
I know. I have SUCKER written across my forehead. LOL!!
How did you get the files on the card? I know that might sound like a stupid question, but I am running out of ideas here. Im going to look into the card that you have.
Thanks
Robert
Try different card readers (ask your friends or maybe you neighbors). Those xx-in-1 readers should work well. Those USB-Stick like card readers didn't do the job for me as long as I use them under Windows.
try re-formatting the SD card ...then see if that works .. if not, return it ... go buy a Kingston 2gb MicroSD ...it works fine on my wing. .. i bought mine for $40 ... never had a problem with it.
Patriot 2gb card
I've been having the same problem with a Patriot Micro SD card. I've had to pull the battery or soft reset it and it works fine after that. This is also using Activesync through USB and Bluetooth.
I've never had this problem - and I spent $13 on my 2gb A-Data card (during a sale) Quick browse of NewEgg shows $20 now
Here's the Search URL
http://www.newegg.com/Product/Produ...E&Description=MicroSD 2gb&bop=And&Order=PRICE
Hello guys, i've just bought a vodafone v1605 Hermes, after having a bit of fun with it i've bought a microSDHD 4GB cause i wished to install TomTom...
I've inserted it, and after going on settings/memory or file explorer, i couldn't see the extended memory =(
I've tried shutting down the device and turning it back on... but nothing to do... (i've also tried to remove and insert it several times)
After that i've tested it with the adaptor on my PC and it works! =/
Strange thing...
Than i remembered that somewhere someone was talking about the fact that it's needed WM6 to see microSDHD on the device, so i've installed blacksatin, last radio version and last spl but nothing to do... my device can't see the SD card... =(
Now i'm guessing if it may be possible that my device microSD reader is broken... but i really hope not!
Has someone else had this issue?
Is there something i forgot to do? some setting, or something to flash on the device?
Just to assure that it isn't a microSD reader problem, today i'm going to buy a microSD 256mb, let's hope it will see the extended memory card..
All suggestions are appreciated... Thanks!
I had a similar problem after first buying a micro sd. The cause is from pushing it too far in. The hermes micro sd slot is deeper than the sd card is supposed to be put in (by about 1mm). If you insert it until around half a mm is still pertruding it should be ok.
Thanks for the suggestion OdeeanRDeathshead i've tried also this solution... but nothing to do... =(
Just for curiosity, when i insert the microSD and i'm in memory page, should i see it immediatly if the device recognize it? or i've to reboot or "reload" the page?
Ty!
Ok, yesterday afternoon i went to buy a new microSD 1Gb (great offer, i've paid it 13 euros for a promotion) and it works without any problem... so now i really can't understand why the device can't read the 4Gb...
It is an orginal SanDisk MicroSDHC 4Gb... =/
My only doubt is that the device can't recognize this high capacity SD... =(
Am sure I read elsewhere that you need to format the card in a PC card reader (SDHC capable) and then put it in the phone and format again - or something like that.
crazyC said:
Am sure I read elsewhere that you need to format the card in a PC card reader (SDHC capable) and then put it in the phone and format again - or something like that.
Click to expand...
Click to collapse
at this point i think that this is the missing passage...
i'll try this soon and report...
thanks crazyC!
MicroSDHC cards are not compatible with some WM5 ROMS. What ROM are you using?
Thought my Hermes (well SPV M3100) was playing up.
Turns out it can no longer see the 1GB storage card.
Used to work fine and then just stopped.
I can read it on my PC and the files are on it.
Put it back into the SPV M3100 and it tells me no storage card present.
Any idea how to rectify this?
Thanks
think ive read somewhere here.. (think wiki.. am not that sure) something about your problem...
will look up link for you..
GOT IT.. TRY HERE..
hope this helps...
Thanks for the reply. Unfortunately, I *think* I have a different problem.
The card just does not appear at all. It just doesn't think it has a storage card.
Ejecting and re-inserting has no effect. Will need to try an get hold of another MicroSD card to see if that works.
If anyone has any other suggestions, fire away please!
Howdy,
I did mention a while ago when asked about a 4gb card.
Depending on your OS (xp, or vista). You may have accidentally said yes to a 'do you want to format and scan the card ' whilst in your pc at some point.
This can kill the card as far as the phone considered.
Try re-formatting the card trying both fat and NTFS, in your PC
Anyhow, one format works one doesn't.
I have done this a few times to myself before I realised it
Good luck !
Any probs private email me if you like
If i plug out the MicroSD card and plug in again, the card might not be recgnized until reboot, or sometimes it can been found immediately. Can anyone tell me the reason?
This is my first posting to this forum, so bear with me if my problem already being answered (even though I could not find it when searching the tread )
My Trinity could not detect the 2G kingston miniSD card. When I try to detect on the computer via the card reader, I got the message the disk is not formatted and it asking me either to format it now? When I click "YES", I got the error message about the disk cannot be formatted. When I check on Disk Management, it shown the disk is Unreadable.
This miniSD is never being used before (even though I bought it awhile back). I just wondering if this miniSD already damage somehow. I cross my finger it is not a problem with my Trinity ~ hate to send it for repair because I just upgrade the ROM to WM6 yesterday with latest HTC official rom
Any input about this problem is very much appreciated.
if the card reader cant work with it and your pda will not work with it
then for it to be an issue with your pda it would require there to be an
issue with cardreader too
chaches are the card is dead
Yes indeed!!!
Rudegar said:
chances are the card is dead
Click to expand...
Click to collapse
Thanks Rudegar. Yes it is dead , kind of suck considering that card is never being used. When put on a brand new card that I just bought (2GB PenDrive miniSD for USD25 (RM83)), the PPC can access it OK. Did any of you know how to resurrect the dead miniSD card? Is it possible? Sorry for stupid question, I'm newbie to PPC and SD card
hi.
it could be a hight density minisd card. there is some patch to fix it.
search it here, somewhere. it's a know issue!
try to use another minisd, but with less size to prove it.
i home is not the phone problem!
The same card works fine with my trinity.
Yours is probably out of order.
Yes dead
Yes it is because no problem when I using a new miniSD card.