Thought my Hermes (well SPV M3100) was playing up.
Turns out it can no longer see the 1GB storage card.
Used to work fine and then just stopped.
I can read it on my PC and the files are on it.
Put it back into the SPV M3100 and it tells me no storage card present.
Any idea how to rectify this?
Thanks
think ive read somewhere here.. (think wiki.. am not that sure) something about your problem...
will look up link for you..
GOT IT.. TRY HERE..
hope this helps...
Thanks for the reply. Unfortunately, I *think* I have a different problem.
The card just does not appear at all. It just doesn't think it has a storage card.
Ejecting and re-inserting has no effect. Will need to try an get hold of another MicroSD card to see if that works.
If anyone has any other suggestions, fire away please!
Howdy,
I did mention a while ago when asked about a 4gb card.
Depending on your OS (xp, or vista). You may have accidentally said yes to a 'do you want to format and scan the card ' whilst in your pc at some point.
This can kill the card as far as the phone considered.
Try re-formatting the card trying both fat and NTFS, in your PC
Anyhow, one format works one doesn't.
I have done this a few times to myself before I realised it
Good luck !
Any probs private email me if you like
If i plug out the MicroSD card and plug in again, the card might not be recgnized until reboot, or sometimes it can been found immediately. Can anyone tell me the reason?
Related
hello guys & gals, i bought a sandisk 1gb minisd for my wizard this morning, however whenever i put the card in the phone doesnt seem to read it.. any ideas on what one is ment to do? thanks in advanced!
Hi - you did not say which wizard or which rom. Occ they are a bit fussy with the minisd card but if you put it in and out a few times that may do it, check contacts are clean and no fluff in the slot! Check the disk on the pc to see if it will read it and all is well. Some people have had success formatting disk on pc to fat32. If all else fails its a dud and go and get a new one
Hi there,
I bought a 2Gb Mini SD memory adaptor from 7dayshop last week, which arrived today.
I've just put it into my phone, and it isn't seeing it. Windows is seeing it. I've formatted it to FAT, and FAT32 within Windows, and the phone still doesn't see it.
I've downloaded the "Storage Tools" application to see if that helps, but I'm not getting anything. Does anyone have any suggestions on how to fix this?
Thanks,
Jon "The Nice Guy"
(This post has also appeared on www.htcwizardweb.net)
I bought a 2GB mini SD from 7dayshop and havent had any problems at all with it (worked without requiring formatting).
Works on my EXEC, mini S and PC.
http://www.7dayshop.com/catalog/product_info.php?cPath=777_6&products_id=100991
is this the one you ordered?
Andy
Yehr, that's the one. I've contacted their tech support and they're sending me a returns label.
Regards,
Jon
Make SURE you format the card with the "StorageTools" utility for PocketPC. DO NOT format the card with Windows.
hmmm, i don't know if it helps, but i ended up formating my 2gig (sandisk) in my camera (kodak easyshare v530). i suppose i should have thought of the phone having the format feature... the sd card adapter got stuck in the camera, and it took a pair of pliers to get the adapter out... i didn't really need the sd slot to be spring loaded anyway...
It wouldn't even recognise it as being a valid volume - so I couldn't
I did try and read it with the phone first, which didn't work, then found it worked with Windows (in a card reader), then put it back in the phone (didn't work), then back in the PC (worked), put in a friends phone (worked, then didn't), then back in my phone (didn't work), then back in his phone (didn't)... the only consistant thing was that the PC recognised it
Hey Jon, I TOLD YOU to format the card with STorageTools. The 2GB MiniSD problem is a known bug. You have to format the card in the PocketPC.
Can I get it formatted on another phone which will run Storage Tools?
I'd already started to use it on the PC prior to putting it in the phone.
bought a new 512mb Kingston Mini sd card . I cannot seem to transfer anything to it. Both my PC and the Wizard `see' the card and register the correct size but I cannot transfer anything to it. Any help appreciated. I read somewhere you need to format a new card on the wizard ??? how do I do this
:roll:
you can use StorageTools
Hi Pat thanks for the reply.
What is the executable file you suggest ? is it for using on my PC or the wizard? whats the method ?cheers
its the desktop instalation of storage tools.
http://www.softwinter.com/storagetools.html
download link - http://www.softwinter.com/download.html
Its just pat hotlinked the exe file
yes, sorry. My post could have been a bit more explicit. By the way, what do you mean when you say you can't transfer anything to your card?
Is it just using ActiveSync or did you try your card on your PC with a card reader? If you do have a card reader then you don't really need storagetools . Just format it on your PC and it should be allright.
Another solution is to get WM5Storage (see this post) It will turn your Wizard into a USB drive so that you can copy files without the hassle of activesync or play music files on the card from the desktop, and since it will be seen as a usb drive...format it!
The guy who came up with WM5storage is a genius, I had been looking for this kinf of software ever since I had my fisrt smartphone years ago
Good luck
Hi Pat thanks thats brilliant.
I use a USB reader for the card but it is placed into a SD holder first because my 7:1 PC reader doesn't accept mini SD .
I can see the card and it registers the correct size 512Mb It seems to be accepting drag n drop in explorer and I can see the burn led writing to the card.
When I put it in the wizard it registers the card and offers to find the files so far so good. It then sees the files and transfers them to `libray'?but they don't show up in either the wizard's explorer or win media ?
well that was an interesting 15 minutes :shock:
Clicked on the link Danny gave and got a lockup followed by a BSOD from which the only escape was pull the power lead and reboot. I would advise anyone to treat with caution.
Hello again peanut!
You mean that just by clicking on a the link you got a BSOD? Amazing!
Back to your SD Card, have you tried 3rd party file explorer such as gsfinder (my favorite) or resco explorer to see if they access your card properly? And also try TCMP instead of WMP. For one, it's much better anyway and I've read somewhere (here I guess) that some people had trouble getting WMP to "see" their media files on the SD. Anyway, I guess it would be a good idea to reformat you card in either FAT32 or FAT16 with 512 bytes cluster so as to waste the minimum amount of storage
It may be related to a prolem I have periodically with firefox not loading . Ithink zone alarm is involved as well so I may need to re-install the lot
thanks for the suggestion about TCMP and yes I'll try a fresh format see what happens cheers
The link in my post was found by right clicking Pat12's link and looking at the URL.
All the links are from the same website and i seriously doubt anything is wrong with any of them, check your firewall as it can interupt file transfers and cause things to hang.
My mini sd card and my friends weren't working for banana's. untill i formatted them on the pc unsing a card reader. now they work fine.
never found out why the cards weren't correctly formatted to start with, guess i'm not bothered as they work great. they were also kingstons
thanks for your input RJ webb I'll try a re-format.
Danny your link is fine it was probably my zone alrm plus the drive had gone to sleep lol no blame mate just thanks for your help
Is it a branded card, where did you get it from?
I bought a 2gb unbranded one and it sometimes doesn't show up in the device, and sometimes corrupts the data on the card - so I assume its faulty/dodgy.
I've ordered a sandisk one to replace it with, hope that one works better.
Hi Scotland its a Kingston card I bought off ebay. Probably a crap card knowing my luck. I'll try re-formatting it on another computer maybe that will help.
peanut said:
bought a new 512mb Kingston Mini sd card . I cannot seem to transfer anything to it. Both my PC and the Wizard `see' the card and register the correct size but I cannot transfer anything to it. Any help appreciated. I read somewhere you need to format a new card on the wizard ??? how do I do this
:roll:
Click to expand...
Click to collapse
I hate to ask the obvious, but is it locked with the little switch?
ha ha not so obvious actually because it was at first before I noticed it had a lock the other day. Thanks for the suggestion
Hello guys, i've just bought a vodafone v1605 Hermes, after having a bit of fun with it i've bought a microSDHD 4GB cause i wished to install TomTom...
I've inserted it, and after going on settings/memory or file explorer, i couldn't see the extended memory =(
I've tried shutting down the device and turning it back on... but nothing to do... (i've also tried to remove and insert it several times)
After that i've tested it with the adaptor on my PC and it works! =/
Strange thing...
Than i remembered that somewhere someone was talking about the fact that it's needed WM6 to see microSDHD on the device, so i've installed blacksatin, last radio version and last spl but nothing to do... my device can't see the SD card... =(
Now i'm guessing if it may be possible that my device microSD reader is broken... but i really hope not!
Has someone else had this issue?
Is there something i forgot to do? some setting, or something to flash on the device?
Just to assure that it isn't a microSD reader problem, today i'm going to buy a microSD 256mb, let's hope it will see the extended memory card..
All suggestions are appreciated... Thanks!
I had a similar problem after first buying a micro sd. The cause is from pushing it too far in. The hermes micro sd slot is deeper than the sd card is supposed to be put in (by about 1mm). If you insert it until around half a mm is still pertruding it should be ok.
Thanks for the suggestion OdeeanRDeathshead i've tried also this solution... but nothing to do... =(
Just for curiosity, when i insert the microSD and i'm in memory page, should i see it immediatly if the device recognize it? or i've to reboot or "reload" the page?
Ty!
Ok, yesterday afternoon i went to buy a new microSD 1Gb (great offer, i've paid it 13 euros for a promotion) and it works without any problem... so now i really can't understand why the device can't read the 4Gb...
It is an orginal SanDisk MicroSDHC 4Gb... =/
My only doubt is that the device can't recognize this high capacity SD... =(
Am sure I read elsewhere that you need to format the card in a PC card reader (SDHC capable) and then put it in the phone and format again - or something like that.
crazyC said:
Am sure I read elsewhere that you need to format the card in a PC card reader (SDHC capable) and then put it in the phone and format again - or something like that.
Click to expand...
Click to collapse
at this point i think that this is the missing passage...
i'll try this soon and report...
thanks crazyC!
MicroSDHC cards are not compatible with some WM5 ROMS. What ROM are you using?
ok this is kind of wierd but i bought my wizard from a friend. she formated the card to get all the stuff off. and by the time it gets into my hands it doesnt work anymore. the sd cards in the slot and my phone doesnt know its there, also activesync doesnt know its there. so does any one know if there is anything i can do to fix this myself?????? some program or mod?????
but now that i think about it another question comes to mind. is it that card or my phone just f-ed up have know clue????
ok i just read some before this one and my sd is real and its in a 8125 if that helps
The card probably just needs to be reformatted again. The easiest way would be to put it in a card reader and reformat it with your computer. Formatting it with a digital camera sometimes works too if you don't have a card reader.
great idea but each time i put the sd card in something i doesnt act right, for example in my wii, "cant read sd card" in my camra, without it i loads find but when i put it in the on light just comes on, the screen doesnt even come up lol, i put it in my printer/fax it said "error error" with the light flashing im not giving the up on it 10 bucks for a 2gb come on who else does that. anyway i'm also sry for post in the forum didnt see the accessories link, i got so happy to find this place i forgot forum manners.
Sounds like the only thing you have left to try is the card reader. If you don't have one, the easiest thing you can try is to download and install on your phone WM5 Storage, you can get it here - http://www.freewareppc.com/communication/wm5torage.shtml. Then activate it before you connect your phone to the usb cable and it will detect it as a mass storage device and allow you to format it again, as long as the cards not bad.
Was it formatted on an 'oldish' PC or laptop because it may have been formatted to the wrong spec as anything above 1Gb needs a version 2.0 formatter.
Browse the SD manufacturers sites for an SD format utilty (Toshiba, Sandisk, etc) they can sometimes recover them.
wow thank i dont have one but i was just going to take it to office depot and ask if they can do it for me but that cool
xeno1 said:
Sounds like the only thing you have left to try is the card reader. If you don't have one, the easiest thing you can try is to download and install on your phone WM5 Storage, you can get it here - http://www.freewareppc.com/communication/wm5torage.shtml. Then activate it before you connect your phone to the usb cable and it will detect it as a mass storage device and allow you to format it again, as long as the cards not bad.
Click to expand...
Click to collapse
Thanks for the tip! I thought that my sd card slot on my phone was jacked up. It worked for me!