Self discovery of WiFi networks - Networking

I've recently successfully enabled my XDA Mini S to talk to my home router over WiFi.
Does anyone have advice on how to enable "self discovery" of WiFi network, such as in aiports, cofee house etc
Thanks, balquidder

how did you do it mate...
been trying for ages
Z

balquidder_may said:
I've recently successfully enabled my XDA Mini S to talk to my home router over WiFi.
Does anyone have advice on how to enable "self discovery" of WiFi network, such as in aiports, cofee house etc
Thanks, balquidder
Click to expand...
Click to collapse
Networks that have already been configured (ie connected to and the WEP key entered etc) are classed as 'Preferred Networks. In the WLAN configurator, you can tick the checkbox which says 'Automatically connect to non-preferred networks', and this will search and (attempt to ) connect to any available network, preferred or not.
When this box is checked, the PDA will detect any new networks and give you the opportunity to configure them (if needed).
Hope this helps.
I have used this quite a bit when out and about - several hotels I have stayed at have had hotspots and I have had no issue in connecting with them and using the net as I would at home.

Related

XDA2ii can't connect to WIFI at home

Hi!
Before I start tese are my current system info:
XDA2ii (O2) - UK
ROM version 1.10.00 WWE
ROM date:24/12/2004
Radio ver: 1.00.00
Protocol version: 1337.39
ExtROM version: 1.10.124 WWE
OS: Windows Mobile 2003 2nd Edition
Version 4.21.1088 (build 14235.2.0.0)
I am trying to connect to my home WIFI network but I can't seem to connect. It is indeed picking up the server (name appears) in list but just stops at connection to network. It can't seem to get any connection at all. My wireless router (Linksys WRT54G) can't seem to detect it as well.
I have tried connection to WIFI at an airport and it seems to work but not at home. I have set my Linksys to Mixed mode (B and G) but still can't get it to work.
Any advice?
Thank you!!!
XDA IIi (or 2i) and 3COM WAP
Hi.
Got the exact same (everything) XDA IIi model (also O2/UK). I'm also having problems with WLAN/WIFI connectivity both at work and home. Both cases it's a 3COM OfficeConnect WAP (office one not setup by me). I thought I validated that the XDA seems to be OK by being able to connect to a neighbours WAP (some BT-Voyager thing) with no apparent problems. And so was thinking that the problem is with the 3COM WAP. However, your post raises doubts on my conclusion ...
The search goes on ...
Re: XDA IIi (or 2i) and 3COM WAP
hi
My case is even worse, it can not detect any wifi signal at any of the hotspot in my city. Go to wireless Lan Manager, under WLAN button (red status) there is alwayls a sentence: "no connection in use". Clicking to it, the device seem to search but found nothing.
Try softreset, hardreset but the problem remains.
In addition, I try to turn off the phone (turn on flight mode) then it don't allow to turn on bluetooth and wifi too.
Maybe it is due to hardware error.
Really disappoint with O2 UK
Regards
Tuan
WiFi connection problems with XDA2i
I have exactly the same O2 xda2i build as Johnnyboy, and precisely the same problem with WiFi as Blackwolf and Johnnyboy. I have a netgear WiFi access point at home, and have disabled the attach restriction and removed WEP. However, although the XDA can see the network name, it cannot connect to the network (just displays connecting...) nor does it show anything on the signal bar. Needless to say, it does not display SSID, Tx rate, Channel, IP address or any information from the network.
I have bought this device specifically for wifi access, and it is somewhat disappointing. Anyone have any idea how this can be fixed? (if at all :? )
XDA Wi-Fi Successful Connection!!!
Hi,
I'm new to the forum and new to XDA2i....
I too had many frustrations connecting the wi-fi...but now I've cracked it, here's how.......
On first very first use (or following a hard re-set) device users are prompted to choose “What do you want WLAN to connect to?” The option bullets are ‘Internet’ or ‘Work’….’Work’ should be selected, this will connect them to the nearest WLAN (if this network is WEP encrypted it should be switched to ‘Open’ rather than ‘shared’ as is often the case).
Next prompt asks for any WEP Encryption ‘Pass Key’ to be input, when doing so omit any ‘-‘ between character pairs. Normal start-up should then be completed. Once device is up and running…..
From ‘Start’ pull-down on the ‘Today Screen’ select…. ‘settings’>’connections tab’>’connections icon’>’advanced tab’>’Select Networks’> pull-down ‘My Work Network’ > ‘OK’ out of selections to save and exit.
Go to ‘Wireless Manager’ in programs, select WLAN icon from main screen (which should turn green to show active), then select mini ‘WLAN’ icon from lower toolbar to see the status of the connection, quality of signal etc.
That did it for me......
Cheers
Finally cracked it! As I never had any problems with my Netgear MR814 wireless router, I assumed the issue was with the XDA2i. Instead, a router firmware upgrade did the trick! Should have thought of that earlier.
Cheers, S.
When i first got my XDA 2i home from the shop the first thing it tried was the wireless lan, and the same thing happend to me also..... everything fine in the router but still unable to connect the xda.
anyway after few hours of going over every single setting time and time again , it finally worked !!
i left the Wlan enabled and after a period of a few minutes it connected to my network.
So i think the XDA 2i is quite tempremental with Wlan, as i know my settings were correct.
having said that, i have had no problems with Wlan t all since then, it will now even connect to other Wlan hotspots with no problems whatsoever.
The only problem i have now is recieving a decent O2 Cellphone signal i my area
Well I have a XDA IIi and it connects fine and allways has to Citi Hotspots, TMO hotspots and my own Linksys WRT54GS. Netgear is the biggest piece of crap ever sold. If you have one I suggest you soak it in gas and burn it.
I had a problem with my XDA IIi connecting to a home Wi-Fi network with a Linksys WRT54GC router: a signal showed in the Wireless LAN Manager, including an IP address, but the WI-Fi icon at the top of the Today screen had no connection bars. After days of this I went to the Linksys settings for an unrelated reason and disabled Wireless SSID Broadcast. Inexplicably this appeared to cure the WiFi problem with the XDA IIi, and I can now connect with ease.
Ok, I might as well add my question to this thread, as it's relevant.
I have an O2 UK XDA2i, and I've also experienced similar problems connecting the wifi and managing to get it to work properly.
I'm at Uni in Birmingham, and at some of my faculties there's wifi for students and staff to use - they give the broadcast SSID UCEOpenAccess, and you use your system logon (in my case STUDENTS\F05310011 and my password (secret ).
I have these details set in the LEAP tab of my wireless lan config (in the WLAN settings) - I have an entry named UCEOpenAccess, and I have my username and password (and domain) set correctly, and the auth type set to Open System (as opposed to EAP, doesn't seem to make any difference whatever I set it to)...
... I just can't connect to any wifi network! I can't even _SEE_ the wifi network, and I know it's there, I can pick up other wifi networks and detect them using Wifi Graph and Hitchiker. I just, bizarrely, can't see the one wifi network I'm trying to connect to.
It's incredibly frustrating. I have my network adapter set to connect to Work (as I've seen advised on these forums), and my IP is assigned via DHCP (they use a weird class b subnet for their network), and the proxy to connect to the Internet is also setup correctly in my Network (This network connects to the Internet checked, This network uses a proxy to connect to the Internet, and proxy is specified in the box), and as the proxy is a SOCKS 5 authenticating proxy, all the relevant details and username+password are in place in the Advanced settings.
Still doesn't work!
Is it due to my original (and decrepit, from the looks of things) firmware and software versions? I'm running original radio, is that a problem maybe? I've scouted about quickly for updates from O2 for my XDA, but I don't want to install a Japanese update as I don't reallllly want to have to read Japanese (and I can't, etc) - I don't want to make a brick out of this brand new phone, but the resources for total xda newbs is somewhat lacking. Can someone just poke me in the right direction with a stick?
Cheers all.

Connecting to the Internet over a WiFi network

So I'm facing this problem, generally not just on my Touch HD but also on a older Dell Axim x50v but also on a friends iPhone.
I got a WiFi network set up at home, secured etc. two notebooks connect over it to the internet on a daily basis, but I just can't get the HD or any other mobile device to connect to the Internet over the WiFi.
On my HD, I can easily connect to the WiFi, even edit router settings over it, but not the internet. The MAC of the HD is entered in the router to be given a fixed IP and is allowed to receive packets same as the tow notebooks.
Is there some problem with the mobile devices or is it a issue with the WiFi?
On my device I found the connection through Comm Manager>Wi-fi>Settings>Wireless LAN quite straightforward. Does not need any mac# assignment on the router as long as WEP/WPA keys are in router (router set in infrastructure mode). Other settings I used, if that's any help is in Configure Wireless Networks - Networks to Access - Only access points and in Network Adaptors - My network card connects to - The Internet.
Hope that helps.
Zarakiteque said:
So I'm facing this problem, generally not just on my Touch HD but also on a older Dell Axim x50v but also on a friends iPhone.
I got a WiFi network set up at home, secured etc. two notebooks connect over it to the internet on a daily basis, but I just can't get the HD or any other mobile device to connect to the Internet over the WiFi.
On my HD, I can easily connect to the WiFi, even edit router settings over it, but not the internet. The MAC of the HD is entered in the router to be given a fixed IP and is allowed to receive packets same as the tow notebooks.
Is there some problem with the mobile devices or is it a issue with the WiFi?
Click to expand...
Click to collapse
Hi was able to save this ans but forgot the source though.
1. Go to start/settings/connections and click 'Wi-Fi.
Click 'Wi-Fi' and from the drop down menu chose 'Work' (not 'The Internet') then click 'OK'.
(Seems crazy I know but that's WM terminology for you).
2. You should still be in start/settings/connections/ so click 'Connections' the 'Advanced' tab.
click 'Select Networks' and set both boxes to 'My Work Network'.
Click OK.
3. Now when you click Settings/Communications (in Touch Flo desktop) and turn on Wi-Fi every app that connects to the internet will automatically connect via your WiFi connection.
4. If you need to connect using your Telco’s Data connection (should you be away from a WiFi router:
From Settings/Communications click then 'Select Networks' and in the top box choose 'internet' or ('Optus internet settings' in my case).
Remember to disconnect using 'Select networks switch' and change it back to 'My Work Network' as per step 2 once your finished.
this solves my problem..
some though needs to boost there power settings. To do so;
Go to start/settings/connections and click 'Wi-Fi. Then go to advance then choose "power mode" tab. Then change the slide to middle from best battery or to best performance.
HTH.
I tried both suggestions and it still doesn't work for me. Well, it further hints towards a problem with my router settings, so gonna have to see if I can find the problem there.

WiFi network has IEEE 802.1X checkbox checked - How to remove

I cannot connect to my home network today. When going through all the settings, I see that the IEEE 802.1x checkbox is ticked, but greyed out. How can I remove either the network, or remove the IEEE setting ? I don't know how this changed, as it was working yesterday. I have two notebooks connected to the same router without any problems and neither has this check box ticked. so am presuming this is the problem - the problem being that it will not get an IP address. It finds the network but will not connect. I can see an option to edit the network, and remove the settings, but there is no option that I can see to remove the IEEE setting, or delete the network so I can start again, but am not sure this will prevent the IEEE setting from being selected by some other means. Obviously something caused it to select this, but I don't know what. I have removed any programs I have installed over the past day or so in the hope that this might have resolved it.
ieee802.1x == wifi network
http://en.wikipedia.org/wiki/802.1x
Thanks for that. I realise now that when WEP is selected (which my network is) that IEEE is activated by default. This means that I have some other problem accessing the network. It detects the network, says "connecting" then reverts to available. Never had a problem with this before and at a loss to know how to resolve it. Will try to connect to another network that I know works tomorrow.
enseeess said:
Thanks for that. I realise now that when WEP is selected (which my network is) that IEEE is activated by default. This means that I have some other problem accessing the network. It detects the network, says "connecting" then reverts to available. Never had a problem with this before and at a loss to know how to resolve it. Will try to connect to another network that I know works tomorrow.
Click to expand...
Click to collapse
I also tend to experience similar problem,
there are networks I can never connect to even after configuration,
when other work great..
The problem is that it has never been a problem to connect to this, or any other network. The only change I have made to the PC, which connects to the same router as the X1a is that I have set up one of my browsers to access the internet via a proxy, but I don't think that would impact on the inability of the X1a to access it.

New Touch Diamond 2 Wifi Wont Connect

Hi Guys & Gals,
I have a brand new HTC Touch Diamond 2, on O2 network - this is an untouched device, all i have done is booted it up and sync'd it with my PC,
I have tried to connect the device to to wireless networks now with no luck.
1. My home connection - security enabled WPA-PSK password protected, The phone can see the network, i type in my network key - i also checked the password on my router setup. The little spinning circle comes up and try's to connect with no luck. It will then keep trying for as long as the wireless is on
2. Home connection again with no encription - again the same thing
3. Work connection WEP secured, type in the key, same thing again.
Has anyone encountered these sorts of problems before in the past - if so how do i fix it so i can connect wirelessly.
Cheers Guys
JdeRonde
Doubt if this is an issue with the phone more likely to be a setup of the wireless.
What router do you use?
Do you have MAC Filtering enabled?
Do you use your router as a DHCP server?
Are there any error messages displayed on the phone?
When it doesnt connect and you tap the notification area (top bar to the right of START) do you have any messages there?
jderonde said:
Hi Guys & Gals,
I have a brand new HTC Touch Diamond 2, on O2 network - this is an untouched device, all i have done is booted it up and sync'd it with my PC,
I have tried to connect the device to to wireless networks now with no luck.
1. My home connection - security enabled WPA-PSK password protected, The phone can see the network, i type in my network key - i also checked the password on my router setup. The little spinning circle comes up and try's to connect with no luck. It will then keep trying for as long as the wireless is on
2. Home connection again with no encription - again the same thing
3. Work connection WEP secured, type in the key, same thing again.
Has anyone encountered these sorts of problems before in the past - if so how do i fix it so i can connect wirelessly.
Cheers Guys
JdeRonde
Click to expand...
Click to collapse
I too had problems with WIFI. My home work network was visible but it would immediately drop or not be able to connect. A few days later it started working flawlessly and I have no idea what changed.
I am sure you have tried a soft reset but just in case...
Tony
I have a NetGear DG(Some Number) v4 ADSL wireless router, which i have set up and works for all of my other devices (ie. Laptops, PS3). With a simple encription key.
I get no messages etc, all it sais is that its 'not connected' and there are no new notificatons
It then persists in trying to connect again and again, when it cant connect for a while, it then comes up with 'new network connections found' in the notificatins area.
I have switched the power mode to best performance with no luck.
I have tried on 2 different networks now. including with all encription off. WEP and WPA-PSK - This is driving me nutz cuz i love the phone, i just want to use it to browse the web without paying out the nose for it.
DHCP server is dynamic from my ISP.
I have contacted HTC now about the issue, but im going to feel so stupid if it turns out to be somthing simple like a setting on the phone somewhere.
But thanks for the reply
Have you checked you arn't using MAC filtering?
Log-in to your router and check under Wireless settings > Wireless Station Access List.
While you are on your wireless setting page check what Encryption your using for WPA-PSK? TKIP? (The wrong encryption chosen will cause you not to be able to connect)
Ok maybe telling you how to suck eggs but on your phone:
Settings > Communication > Wifi
Select Advanced at the bottom right.
Select Change Network
Click Add new...
Type in the name of your network (The SSID also found under wireless settings, Case sensitive)
Select Connects to: The Internet
Leave the other two boxes unticked.
Click next.
Select the correct Authentication - WPA-PSK is different to WPA2-PSK. You will probably be using WPA-PSK.
Select the correct Encryption (Propably TKIP)
And type in your Network Key
Click Next and Finish.
How does this fair and what are the results of checking info on wireless setting page?
Im at work at the moment trying to connect to the WEP connection,
This connection most deffinatly does not have mac filtering on it, just asked the network tech.
Okies.....
Changed the network key to.... Shared key and it works
so i am guessing that it must be somthing to do with my setup at home..
Cheers guys
Cool.
Just match up the Authentication / Encryption / SSID and Network Key from the router to your phone setup and you should be fine.
HTC TD2 Wifi issues
Hi
There's some discussion around the web about this problem of encrypted wifi connectivity: a few things to note
1] the TD2 is _very_ sensitive to the power settings applied to the wifi chipset.
The default power saving settings are only likely to work if all other on-board devices - bluetooth, HSDPA, GPS [and maybe even the screen] are either off or in low power mode: the general recommendation seems to be that one adjusts the wifi device power to be "best performance" if one wants to guarantee connections.
2] several people have reported that both the wifi device [card] and the settings for the particular wifi lan [SSID] to which you are attempting to connect should both be configured for "Work" rather than "The Internet".
3] these secured/encrypted connection failures are not about the WiFi access point or router: I've personally tested with several different makes and models of Router and Access Point [3com, Cisco, Enterasys, Netgear, DLink, Belkin etc] - both on my own and on client networks where I have complete control of security, and have also methodically tested every single combination of TD2 setting for WEP and all variants of WPA. In each case my TD2 has failed to make a valid encrypted connection.
The same device will happily connect to "open" unencrypted access points and routers.
Other models of HTC device, such as the Tytyn II and Touch Pro work fine on the same access points and routers: so we can be pretty sure that this is specifically a TD2 issue.
Conversations with HTC's European Tech Support on this issue have not been helpful to date, but they HAVE pushed the issue further up the line, so there's a chance that we'll see a resolution.
Robert

Connecting to hidden wifi network

Would like to know is there any way to connect to wifi hidden network?
All of my devices (ie. Laptop, PSP, Windows Mobile PDA) are able to connect to the hidden network but the Magic can't. Any idea to do this?
Mine wifi connection is hidden (I didn't broadcast the SSID). If the I enabled the SSID broadcast, then only it can connect.
Do share some experience on this since I can't find any additional settings on the Magic.
Thanks!
settings>wireless controls>wifi settings>add wifi>fill in from there.
My old neighbor hide his wifi and i just typed in the name that used to pop up in the ssid and it worked just fine. I had to do it with every comp and wifi devise in our house.
X-i-phoner said:
settings>wireless controls>wifi settings>add wifi>fill in from there.
My old neighbor hide his wifi and i just typed in the name that used to pop up in the ssid and it worked just fine. I had to do it with every comp and wifi devise in our house.
Click to expand...
Click to collapse
Yep it's working. Thanks a lot!
We have to add it manually. Previously what I've done is I've unhide the wifi connection and broadcast the SSID in order for the Magic to see it. From there I've added the network to the Magic. Then I've set the network to hidden mode again. After that, the Magic won't connect to the hidden network. Main point is that it seems to remember whether the network is hidden or not when the network is added into the list.
** Windows Mobile does have an option to determine whether the selected network is a hidden network or not

Categories

Resources