Database Users

PROBLEM: sharing folder with WiFi...

Hi guys!
I'm trying to use (first time 4 me!) WiFi connection from my laptop and my Jamin in this way:
Start from scratch (without connections...) and turn on both wifi.
Create a new connection for only 2 devices from my Jamin without any security (4 the moment).
Now I can see the new wifi network on my laptop...
I chose connect from my laptop and the connections estabilish.
Handshake to retrieve the ip address is oaky and now I've got the connection from my 2 devices (Jamin and laptop).
On laptop I can ping the ip address of my Jamin but now I don't know what can I do with this connection.
Is it possible to share some folder on laptop and/or on Jamin to copy/remove/move some files?
Is it possible to use the std modem connection of my laptop for browsing the web from Jamin?
Is it possible to sync with Activesync my Jamin?
How can I do it, guys?

You can do most of what you want:
First, make sure that if you selected (on the Jamin) that your network connects to 'Work' in Settings->Connections->Connections->Advanced->Network Selection both lists read 'My work network' or 'My ISP' if you selected the 'connects to Internet'.
1) To browse, copy, move and delete files on you laptop just create standard windows shares. (right click folder or drive, select sharing)
To access the files from the Jamin select 'open path' in file explorer and type \\computer-name\\share-name. I recommend using the free Total Commander because built-in file explorer takes up to 3 times as long to transfer files (no idea why, it just hangs in the middle).
Unfortunately Windows Mobile does not support file sharing so this will not work viceversa (looking at Jamin files from laptop)
2) To serf the web through laptop internet connection you have to use 'internet connection sharing' (not a problem if you are using Win XP).
On the Jamin go to Settings->Connections->Network Card->Adapters
tap on your WiFi card in the list and enter your laptops IP as the gateway.
3) Sync is possible but tricky. I don't know the exact procedure but you need to set up a VPN (MS removed WiFi sync from AS 4+ for security reasons). The procedure is documented somewhere here, I just don't remember where exactly.

Great! Many thanks! ;-)

whoops...
Just another think....
What about hotspos?
I never search for a hotspot near me because I think I will not able to connect to a hotspot.
Can you exlain me the procedure to search and use hotspot? How can I see if the found hotspot is open or closed? Do you use some sw to connecti with WiFi?

I am not sure about your laptop, it depends on its WiFi card driver.
As for Jamin it is very simple: Turn on WiFi, it will automatically search for all available networks and display them stating if the network is open or secure. Then you just select a network you want and it will try to connect.
Also in settings->connections->Network cards you can see all the networks your device detected (even those that are not in the vicinity any more) when WiFi is on. Tap on a network to change its settings (like encryption type if any) or tap and hold for a menu.
If you don't mind wasting space on .NET CF 2 You can download a free app called Hitchhiker that helps auto-configure WiFi network connection.
Just remember: even if you found what looks like an open Hotspot it may be just an unsecured network that doesn't provide internet acces ot the network may block devices by MAC address, in this case it will show as open but you will not be able to connect.

Many thanks! ;-)
So, is it possible that I can connecto to a hotspot but I can't use it or if I see the hotspot connected that means that I can use it to surf the web?
After the connection is estabilished what I have to do or confiugre to surf the web using that connection?
Thanks a lot guy! You're helping me so mutch!

Whether you have internet access or not once you are connected depends on the network (what you think is a hotspot may be in fact someones home network that does not have internet access). If it is a public hotspot you don't have to do anything once you are connected except to open Internet Explorer.

Sorry 4 my stupid question but..
what is the difference between accesspoint and hotspot? :-(
I'm always thinking (WRONG) thet accesspoint is home LAN and hotspot is internet...

The definition thing is kind of tricky. When you say access point some people might just think of a device with an antenna that plugs in to your network to extend coverage and others might say it is the same as hotspot.
Hotspot is generally defined as a public access WiFi network.
All of that is semantics though. When you turn on a WiFi capable Pocket PC or laptop it detects everything with WiFi around it.
It can determine if the source is another computer (Ad-hoc network) or if it is a router (real network), what standard it is (g/b) and whether it is secured (requires key) or not. Also if the network broadcasts SSID (disabling it is another security measure) you may learn its name, although it may be set to default, which is usually the router model.
As far as I know there are two ways to learn what you are connected to:
1) Ask who ever is in charge of it.
2) Poke around, and see what you get.
One more thing: There is an app (not free) called PocketLAN. It shows you the network (on your Jamin) just like you would see it in Network Neighborhood on the PC, plus lets you ping other computers and stuff. You may want to check it out.

Thanks man!

Well! Yesterday I was able to manage shared folder of my laptop from Jamin with WiFi connection.
Thanks a lot!
Now I have another problem.... I clear all my "wifi networks" (?) from the tab visible in the screenshto.
I also clear all my wifi networks from laptop.
Tha problem is that I'd like to configure somethink on my laptop in order to automatically connect from my Jamin on it.
I'd like to turn on the wifi on Jamin and receive the notification that a connection can be estabilish to my laptop...
I tryed a lot but I can't do it!
Is it possible? The tab in attachment what rappresent? I have to confiugure somethink there?
I'm always thinking that wifi connection are visible simply turning on the wifi of any device...
Is there some guide for dummys? I don't want to annoing so mutch... :-(

levenum said:
You can do most of what you want:
First, make sure that if you selected (on the Jamin) that your network connects to 'Work' in Settings->Connections->Connections->Advanced->Network Selection both lists read 'My work network' or 'My ISP' if you selected the 'connects to Internet'.
Click to expand...
Click to collapse
im sorry levenum but i didnt quiet understand what u were trying to say... what exactly do i need to do after i select network selection ??
thank u

phreaker18 said:
im sorry levenum but i didnt quiet understand what u were trying to say... what exactly do i need to do after i select network selection ??
thank u
Click to expand...
Click to collapse
What are you trying to do? What is the problem you are getting?
If you start from the beginning I might be able to help you better.
In any case once you open 'Network selection' you will see two combo boxes - "drop down" lists.
You need to select same thing in both - "My ISP" than make sure when you connect to a network you select "The internet".

unable to find network wifi
i am using o2 xda mini s to connect my laptop via wifi. it shows the connections excellent on both devices with ip address 169.254.72.236 on ppc nd 169.254.130.63 on laptop. i used laptop ip address as gateway address on ppc network wifi adaptor setting.
using ping with this ip(169.254.72.236) from laptop it shows success. but can't share folders and transfer files. when i try to open the pah from the file explorer in ppc or laptop it says 'unable to find network that support this ip address' either by entering the name of computer or by entering ip address
help me in using this facility.

WIFI Internet Connection

Hi guys,
I've got a netopia router (Irish "eircom" broadband) and while normal internet connections via laptop or PC (with USB Wifi dongle) work fine I just can't get my XDA Mini S to actually access the internet. I have managed to actually get it to connect via WIFI however when I launch internet explorer and click on a link it says it can't access using this connection.
"Can't connect with current connection settings. To change you connection settings, tap Settings".
Under connections I'm not sure what to select as I don't believe I need to setup a modem connection or VPN - am I wrong here??
It shows "connected" in the WIFI settings, indicating my SSID etc. Could someone advise me on what else I need to set. Basically I'm obtaining an IP address and my laptop etc work fine, just wondering what more I need to do to bash internet explorer into submission on the XDA. Is is just me or are Microsoft making this very hard on the normal user..
Start--> settings -->Wireless Lan
SSID is correct.. i.e my Wireless LAN
Mode : infrastructure
BSSID is set (though I don't know what this indicates)
TX Rate :auto
Channel :7
Start--> settings -->Wireless Lan - Advanced Tab
Status : Associated to Network
MAC number given
IP address given (so I guess DHCP is working fine)
Leap tab and Enroll tab - all settings blank.
------------------------------------------------
Start --> settings --> system --. Network cards
SSID shows Connected
Under Network Adapters tab : My network card connects to the Internet.
Adapter NE2000 Compatible Ethernet Driver. (not sure what difference this makes????)
I temporarily disabled WEP for the purposes of simplifying things.

Simple yet very annoying problem:
Go to Settings->connections->connections->advanced->network selection and make sure both combos read 'My ISP'.
Then, when connecting to your WiFi network select 'This network connects to the internet' (as I understand you already have this set under 'network adapters' so it should be ok).

THANK YOU!
levenum said:
Simple yet very annoying problem:
Go to Settings->connections->connections->advanced->network selection and make sure both combos read 'My ISP'.
Then, when connecting to your WiFi network select 'This network connects to the internet' (as I understand you already have this set under 'network adapters' so it should be ok).
Click to expand...
Click to collapse
Thank you so very much I have been look for this forever!!!

thanks so much for the tip too. i've been trying to fix my wifi ever since i upgraded to windows mobile 6 and this did the trick.

New Touch Diamond 2 Wifi Wont Connect

Hi Guys & Gals,
I have a brand new HTC Touch Diamond 2, on O2 network - this is an untouched device, all i have done is booted it up and sync'd it with my PC,
I have tried to connect the device to to wireless networks now with no luck.
1. My home connection - security enabled WPA-PSK password protected, The phone can see the network, i type in my network key - i also checked the password on my router setup. The little spinning circle comes up and try's to connect with no luck. It will then keep trying for as long as the wireless is on
2. Home connection again with no encription - again the same thing
3. Work connection WEP secured, type in the key, same thing again.
Has anyone encountered these sorts of problems before in the past - if so how do i fix it so i can connect wirelessly.
Cheers Guys
JdeRonde

Doubt if this is an issue with the phone more likely to be a setup of the wireless.
What router do you use?
Do you have MAC Filtering enabled?
Do you use your router as a DHCP server?
Are there any error messages displayed on the phone?
When it doesnt connect and you tap the notification area (top bar to the right of START) do you have any messages there?

jderonde said:
Hi Guys & Gals,
I have a brand new HTC Touch Diamond 2, on O2 network - this is an untouched device, all i have done is booted it up and sync'd it with my PC,
I have tried to connect the device to to wireless networks now with no luck.
1. My home connection - security enabled WPA-PSK password protected, The phone can see the network, i type in my network key - i also checked the password on my router setup. The little spinning circle comes up and try's to connect with no luck. It will then keep trying for as long as the wireless is on
2. Home connection again with no encription - again the same thing
3. Work connection WEP secured, type in the key, same thing again.
Has anyone encountered these sorts of problems before in the past - if so how do i fix it so i can connect wirelessly.
Cheers Guys
JdeRonde
Click to expand...
Click to collapse
I too had problems with WIFI. My home work network was visible but it would immediately drop or not be able to connect. A few days later it started working flawlessly and I have no idea what changed.
I am sure you have tried a soft reset but just in case...
Tony

I have a NetGear DG(Some Number) v4 ADSL wireless router, which i have set up and works for all of my other devices (ie. Laptops, PS3). With a simple encription key.
I get no messages etc, all it sais is that its 'not connected' and there are no new notificatons
It then persists in trying to connect again and again, when it cant connect for a while, it then comes up with 'new network connections found' in the notificatins area.
I have switched the power mode to best performance with no luck.
I have tried on 2 different networks now. including with all encription off. WEP and WPA-PSK - This is driving me nutz cuz i love the phone, i just want to use it to browse the web without paying out the nose for it.
DHCP server is dynamic from my ISP.
I have contacted HTC now about the issue, but im going to feel so stupid if it turns out to be somthing simple like a setting on the phone somewhere.
But thanks for the reply

Have you checked you arn't using MAC filtering?
Log-in to your router and check under Wireless settings > Wireless Station Access List.
While you are on your wireless setting page check what Encryption your using for WPA-PSK? TKIP? (The wrong encryption chosen will cause you not to be able to connect)
Ok maybe telling you how to suck eggs but on your phone:
Settings > Communication > Wifi
Select Advanced at the bottom right.
Select Change Network
Click Add new...
Type in the name of your network (The SSID also found under wireless settings, Case sensitive)
Select Connects to: The Internet
Leave the other two boxes unticked.
Click next.
Select the correct Authentication - WPA-PSK is different to WPA2-PSK. You will probably be using WPA-PSK.
Select the correct Encryption (Propably TKIP)
And type in your Network Key
Click Next and Finish.
How does this fair and what are the results of checking info on wireless setting page?

Im at work at the moment trying to connect to the WEP connection,
This connection most deffinatly does not have mac filtering on it, just asked the network tech.
Okies.....
Changed the network key to.... Shared key and it works
so i am guessing that it must be somthing to do with my setup at home..
Cheers guys

Cool.
Just match up the Authentication / Encryption / SSID and Network Key from the router to your phone setup and you should be fine.

HTC TD2 Wifi issues
Hi
There's some discussion around the web about this problem of encrypted wifi connectivity: a few things to note
1] the TD2 is _very_ sensitive to the power settings applied to the wifi chipset.
The default power saving settings are only likely to work if all other on-board devices - bluetooth, HSDPA, GPS [and maybe even the screen] are either off or in low power mode: the general recommendation seems to be that one adjusts the wifi device power to be "best performance" if one wants to guarantee connections.
2] several people have reported that both the wifi device [card] and the settings for the particular wifi lan [SSID] to which you are attempting to connect should both be configured for "Work" rather than "The Internet".
3] these secured/encrypted connection failures are not about the WiFi access point or router: I've personally tested with several different makes and models of Router and Access Point [3com, Cisco, Enterasys, Netgear, DLink, Belkin etc] - both on my own and on client networks where I have complete control of security, and have also methodically tested every single combination of TD2 setting for WEP and all variants of WPA. In each case my TD2 has failed to make a valid encrypted connection.
The same device will happily connect to "open" unencrypted access points and routers.
Other models of HTC device, such as the Tytyn II and Touch Pro work fine on the same access points and routers: so we can be pretty sure that this is specifically a TD2 issue.
Conversations with HTC's European Tech Support on this issue have not been helpful to date, but they HAVE pushed the issue further up the line, so there's a chance that we'll see a resolution.
Robert

set up static ip

hello help,
my wife has an htc hd2 phone and i am trying to connect it to our home network. we have an mn700 microsoft router. i have security on it WEP
and on channel 3. The phone is asking for a network key and i put in the wep key and and put it on channel 3 it
states that iam connected but we still can not surf the web.
all other wireless computers and laptops in the house i have assigned a
static ip, i oculd give her phone a static ip but i can not find where or how to do this on htc hd2 phone.
i am thinking that this is the solution, if not please point in the right direction.
also ineed step by step directions on the phone since it is not mine i do not know to much about it.
thanks,
craig

I'm right there with ya, exact same problem. It's amazing to me that a device as sophisticated as this is so difficult to set up. Here are my posts from the t-mobile forum..PLEASE HELP...
I just got my htc hd2. So far I love it. my last phone was a G1 and it was able to automatically switch to my home wireless network when I got in range. Is this possible on the hd2? Also Is it possible to set a static IP address for these devices? I have not been able to get it to work on my LAN. If anyone can give me a walkthrough to set the phone up so It automatically switches to my LAN with a static IP when I'm in range this phone will be pefect...wife just got the cliq xt and she's teasing me... TIA
can anyone tell me how to set a static IP address and how to get it to connect over my LAN. I called customer care and the person i spoke to only had a set of written guide lines and couldn't tell me how to do it, said he had never been asked before. So, Here's what I've done so far to get this device to work with my wireless at home. 1st, Click START > SETTINGS> Wireless Controls and turn Wi-Fi on. It sees my Wireless network and the icon spins to let me know it's attempting to connect? I've put my network password in before so eventually I get a green check mark. So next I tap Advanced in the lower right corner and get to the Wireless Lan page. Then I tap the Change Network button which again lists my wireless networks in range and mine is listed as connected. so then I click the Network Adapters Tab, which brings me to my first question. What should be the setting for "My network card connects to:" I assume "The Internet" but I could be wrong. Below is a long list of adapters I can modify, which brings me to my next question which adapter do I modify? I assume the Broadcom 802.11 Network Adapter, when I tap it I get a screen where I can set a static IP and DNS. I figured I had it at that point, except It doesn't seem to work!. The wi-fi antenna icon is at the top and I have two arrows next to it pointing left and right. green check on my wi-fi network, but when I try to use Opera browser it says ERROR! Connection closed by remote server and I cannot ping the ip i set in the device from my network. I go back turn Wi-Fi off and everything works again. AM I DOING ANY OF THIS RIGHT? thanks again.

Okay, got it to the point to where I can ping the device on my network. The adapter I had to set the static ip to was the Broadcom 802.11 DHD Network Adapter. Using Wi-Fi toggle to turn it on and off and it responds well and connects reliably. However, when I try to browse it fires up the 3G connection. I have just now been able to use remote desktop on my local network using the servers IP, without it turning on the 3g connection. Looks great in 16bit color, but no landscape mode? Most other apps, facebook the browser and others make the 3g connection come back on. How can I make all data connections go over my lan? almost there....

I got it to work, not sure if this is best practice or not, and it's definitely not elegant, but it works.
1. Touch Start > Settings > Wireless Controls and Turn wi-fi on
2. Select your wireless network and enter your password or key
3. Once you are connected (green check), touch Advanced > Change Network (under the ssid) you will see your wireless connection again and it should say connected
4. touch the wireless adapters tab at the bottom. Here at the top select my network card connects to The Internet and select your wireless adapter from the list below.
5. set your static IP address and Name Server info. Touch OK and then return to the home screen
At this point you should have the wi-fi icon with two solid arrows next to your 3g icon.
6. Touch Start > Settings > menu > all settings > connections > connections > advanced tab > Select Networks.
7, change both drop downs to my isp (may be different if you named it something different)
to get back to 3g repeat steps 6 and 7 to switch both dropdowns back to tmobile data or whatever yours was originally and turn off the wi-fi (or download wi-fi toggle) and turn wi-fi off. 3g should come back on automatically if you run an app that connects to the web. if not turn data connection back on in the comm manager.
This works but this sucks. Is there an easier way to Automatically switch between 3g and wi-fi? Am I making a simple problem over complicated? or is there and app for this? Android beats winmo 6.5 on this one.

still no wifi
hello,
trying for days, i can not get your setup to work. still connected
but no internet browsing. i took the same ip that i am using for the phone and put it on the laptop---so i know it is the phone and not anything going on
with the router.
craig

To the OP, i am by no means an expert on this topic. This is how i got mine to work. only advice i could give is to make sure you are editing the correct adapter and if you named your connection settings something different double check. How far do u get with the instructions? do you get a green check after you put in your network key?
I can switch back and forth between wi-fi and 3g no problem but it would be nice to have it done automatically when i'm in range...can anyone help

finally
we reset the phone and then followed your directions. Viola! it worked!
we are working on how to setup identies for different networks,
thanks again mr1credible.

Update. My phone locked up hard and kept telling me my password was incorrect so I had to do a hard reset...After the reset, I decided to take another look at the Network settings..I've got it set up now so that All I have to do is turn wi-fi on and it will use my wi-fi as the preferred connection. All I did was follow steps 1-6 as previous except when I got to step 7, I only changed the second drop down to My ISP. Both Icons 3G and Wi-Fi appear at the top but I can remote desktop my PC and connect to my shares on my local network. I also have it set to automatically shut off my wi-fi if it cannot connect in 30 sec, So when I leave for work in the morning I don't have to remember to shut it off, and I don't have to switch back and forth between settings anymore. All i have to do is turn wi-fi on when I get home. Not bad. Still would like to have it automatically detect my network and connect when in range but I can live with this....

Try SolarWinds Orion IP Address manager.
It Manage your entire IP infrastructure from an intuitive web console .
Also it Prevent your subnets and DHCP scopes from filling up with preventative alert notifications .
check it at
SolarWinds website.

WiFi only works if Data Connection is active

Hello.
Today I downloaded Office 2010 for my HD Mini. After completing the phone restarted.
I then tried to check my email, which failed with a 'no connection' error. I checked the the WiFi was on (it was) and tried again, no luck. I then noticed that the little 'Data Connection' icon was not displayed in the taskbar. I went to Settings>Wireless controls>Data connection and turned this on. Now I could check emails, surf the internet, all as normal. I am sure that this was being done using the WiFi due to the speed of pages loading. But surely I shouldn't need to turn on a Data connection, to use WiFi?

Mine is havin a similar problem. I am not able to surf even if I connet to my wifi. Only after enabling the data connection it starts work. Though I am not sure which internet its using. Since it was kind of slow.
Don't know for sure if its a bug or hardware issue but it is something. Someone pls help.

mkstevo said:
Hello.
Today I downloaded Office 2010 for my HD Mini. After completing the phone restarted.
I then tried to check my email, which failed with a 'no connection' error. I checked the the WiFi was on (it was) and tried again, no luck. I then noticed that the little 'Data Connection' icon was not displayed in the taskbar. I went to Settings>Wireless controls>Data connection and turned this on. Now I could check emails, surf the internet, all as normal. I am sure that this was being done using the WiFi due to the speed of pages loading. But surely I shouldn't need to turn on a Data connection, to use WiFi?
Click to expand...
Click to collapse
Well. I think I might have found the problem here. I was looking for the setting to turn Wi-Fi off automatically after a few minutes and I came across the setting for DNS Address, I have manually assigned an IP addresses on my Wi-Fi as otherwise my Apple Mac and Windows PC's can't see the printer, I had assigned an IP address and the Gateway address for the router, but I had not found the panel for DNS servers, I had assumed that the DNS server would be located automatically - it appears this is not the case and the HTC HD Mini was using the GPRS DNS server to locate the IP addresses before downloading the pages via the Wi-Fi connection.
So, if suffering from not being able to access the internet on Wi-Fi without a GPRS connection being made try the following:
Settings >
Wireless Controls >
Wi-Fi >
Advanced (Button) >
Adaptor and Networks >
Network Adapters (Tab) >
Tap on - Broadcom 802.11 Network Adapter >
Name Server (Tab)
Enter your router DNS server in the appropriate section
Click Done.
Not sure if this is required...
What is the DHD adapter???
I did enter both my IP and DNS settings here though... Just in case!
Tap on - Broadcom 802.11 DHD Network Adapter >
Name Server (Tab)
Enter your router DNS server in the appropriate section
Click Done.
Then back out of all the menus/pages.
This worked for me. Worth a try?