It is possible connect to UMTS/GPRS while Activesync is on?
The idea is to access from a portable pc without internet connection and use the feature with Pocket Controller Program and ONLY in JASJAR, without use modem feature or PC explorer or another, only Pocket Controller and soft on JASJAR.
Thanks
Well I know I can use the wireless modem over bluetooth whilst I am stil connected for activesync over USB to my PC
Yes, I know about modem usb or BT...
My question is another. Is for use like I described in my post.
Thanks
Ahh Sorry - I think I understand the question now. You want to use your JASJAR to surf the internet through SOTI pocket controller whilst it is still hooked up to your PC with ActiveSync.
Can't see why you would want to do this, but I'll see if I can figure it out.
Exactly, that is!
Thanks
I tried this also, but failed.
Exactly, fail. So I ask for it.
Thanks
In order to acheive this you must disable the "pass through" connection that active sync makes when it connects. I'm not sure whether this can be done
Hummm I cannot see that option... I't possible that register must be modified but.... how!? That the question.
Thanks
Sagit said:
It is possible connect to UMTS/GPRS while Activesync is on?
The idea is to access from a portable pc without internet connection and use the feature with Pocket Controller Program and ONLY in JASJAR, without use modem feature or PC explorer or another, only Pocket Controller and soft on JASJAR.
Thanks
Click to expand...
Click to collapse
If you just want to see your PPC on your PC using Soti's Pocket Controller, you can setup a TCP/IP connection in Pocket Controller on your PC given that you have a Wireless network setup. Using this method does not require that you have Activesync running and will be able to use UMTS connection at the same time... I've set this up on my PPC and network.
Related
Hi,
I have been trawling around looking for a piece of software to control the jam via a PC when its connected via USB etc.
I read that there was something from Microsoft themselves, part of their Powertoys functionality, but that seems to have been removed. Also a mention of something called Cerdisp but that might have been the same product.
Anyone know of such a product? It would be very handy while the phone is connected to the PC and seems the norm for smart phones these days.
Thanks,
M.
http://www.google.com/search?ie=UTF-8&oe=UTF-8&sourceid=gd&q=remote+display+pocket+pc
which leads to
http://www.microsoft.com/technet/prodtechnol/wce/downloads/ppctoys.mspx
which leads to
http://www.microsoft.com/technet/prodtechnol/wce/downloads/ppctoys.mspx#EGAA
which gives you
http://download.microsoft.com/download/5/3/7/5376bdb4-0aec-40df-bb5c-7a4eb4819b25/remotedsp.exe
8)
Try pocket controller
Try pocket controller
Indeed soti pocket controller is the best, to bad that it doenst have sound also on the pc
gazzrenn said:
http://www.google.com/search?ie=UTF-8&oe=UTF-8&sourceid=gd&q=remote+display+pocket+pc
which leads to
http://www.microsoft.com/technet/prodtechnol/wce/downloads/ppctoys.mspx
which leads to
http://www.microsoft.com/technet/prodtechnol/wce/downloads/ppctoys.mspx#EGAA
which gives you
http://download.microsoft.com/download/5/3/7/5376bdb4-0aec-40df-bb5c-7a4eb4819b25/remotedsp.exe
8)
Click to expand...
Click to collapse
Thanks, downloaded and using. That's exactly what I wanted just couldn't find it under Google.
One question for you, I have WebIS mail installed and checking for mail every x minutes. If I have the phone connected via active sync and the GPRS connection starts up once finished it disconnects both the GPRS connection and the active sync connection.
Is there anyway of stopping a GPRS connection while connected to a PC via active sync?
FYI I have phone alarm set to disconnect GPRS 2 minutes after its been used but I think the phone is automatically disconnecting once the connection has been used when active sync is being used.
Any help?
No trouble
With regard to your question, i have no idea unfortunatly... i dont use either of those apps :?
http://mymobiler.com/ is free
thaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaaanks
NiteStalker said:
http://mymobiler.com/ is free
Click to expand...
Click to collapse
I like this program. Works with Vista 64bit and Windows 6.1 on my phone.
Even when I flip my Duo the screen flips on my PC.
Hi all,
I have a toshiba portege r200 and I'm simply not able to set up activesync to work through bluetooth. The darn computer only sees my phone as a modem.
I have no clue how to do this.
I really cant' see why this has to be so hard. Both units are running stupid microsoft software. Whey the can't microsoft think that people migh want to connect their ppc's to their laptops via bt and just make it work easily?
Please, someone help.
thanks
Try deleting the pairing on your pc and the Universal. Then initiate from the Universal. It Should give you an option for ActiveSync. Also check in ActiveSync on your PC that you have set up connection settings to allow connections to Com4 (maybe another Com part in your case.)
Hi,
could an expert out there advise me if my theory is possible please?
Using Remote desktop/Terminal services : See whats on my PC/Laptop on the screen of my XDA2 - connected via cradle and usb(as usual). If so what do I put in the "Server" box of the XDA Terminal services prog and on the "Main" PC.. Do I have to make a Network first? Or ?
Thanks to all.
The site is great but much of it goes straight over my head at the moment..
P
ummm ... your theory seems not that much difficult as you can implement it using Bluetooth networking I guess ..
you can setup bluetooth networking from Pocket PC to Laptop then you can browse what your home PC conatin from your PDA
give it a try
I hope this is what U was talking about , if not please give us more clarifications
Cheers
It is better and faster to use Wifi if you're going to use terminal services.
Been using this method since last year.
Thanks but I do not have wifi or bluetooth...
There is a ref to doing it on MS site via the cradle and usb but then it shoots off in the over the web stuff...
I have tried just now but nothing connects.... But I notice that when I check my desktop (xp) pc under the rempte tab - I only have Remote Assistance.... Could this be it? Perhaps I do not have Remote Desktop installed then ! Eh? I will try to locate my original xp discs and see if I can install !!??
Ta.
Remote desktop or Terminal services connect only via IP address.
So you can only connect via TCP/IP using WIFI on your XDA.
Bluetooth 1.1 has no IP address setting so it is not possible also.
I tried all methods since last year and WIFI is the only solution or if your XDA has a backpack you can use a CF type NIC for wired connection via crosslink or hub.
Still Wifi is the cheapest and cleanest alternative. You can use Adhoc settings between your PC if you have no WIFI access point.
Hello all,
i am a newbie, so i am sorry if there is already a topic on this, as i have been searching and searching, and just cant seem to find anything that seems to directly help.
My laptop, connects to the net via an ethernet cable, and i would then like to connect to my laptop via wi-fi with my wizard.
I have managed to somehow create a ad-hoc connection to my laptop via wi-fi, which i believe is some kind of P2P thingy.
However i am unable to map a network drive in resco explorer, and everytime i go on to internet explorer i get a little message stating that the page can not be displayed.
am i missing something somewhere, or is this just not possiable.
Thanks in advance.
norf1983 said:
Hello all,
i am a newbie, so i am sorry if there is already a topic on this, as i have been searching and searching, and just cant seem to find anything that seems to directly help.
My laptop, connects to the net via an ethernet cable, and i would then like to connect to my laptop via wi-fi with my wizard.
I have managed to somehow create a ad-hoc connection to my laptop via wi-fi, which i believe is some kind of P2P thingy.
However i am unable to map a network drive in resco explorer, and everytime i go on to internet explorer i get a little message stating that the page can not be displayed.
am i missing something somewhere, or is this just not possiable.
Thanks in advance.
Click to expand...
Click to collapse
I'm not really sure that you can do this at least not the way i think you are trying to do it. I didn't think laptops could act as access points which is what you need. If your laptop has bluetooth then you could create a connection using it and map a drive from the Wizard to the laptop.
Kirby
It can be done.
I did the same thing before, now i prefer to use bluetooth, but it definitly can be done.
first, i created an ad hoc connection between my wizard and the pc's belkini usb wifi adapter. then i mapped the shared folder on my laptop with total commander. i must say i had problems doing it with rescos explorer, maybe thats the catch. anyway, i was able to browse through my drive with no problems, mp3, small avi etc. it can be done!
and here goes the question to rkwhyte2: i'have been trying to acces my pc's shared folder using bluetooth active sync connection with no luck, how to do it? i've been looking for an answer since 2 months...
banannq said:
and here goes the question to rkwhyte2: i'have been trying to acces my pc's shared folder using bluetooth active sync connection with no luck, how to do it? i've been looking for an answer since 2 months...
Click to expand...
Click to collapse
Sorry for butting in....
I don't know about accessing shared folder through BT, but after trying and trying AND trying, I was finally able to do an activesync through BT. The catch was to make sure PC has a BT "COM port" assigned. and then create partnership with PC's "Activesync" service (I had 3 listed..Dialup net,Activesync, and headset).
OOOOPS, almost forgot. make sure in Activesync settings that "Allow connections to one of the following" is set to the COM port assigned to BT.
ntegra said:
Sorry for butting in....
I don't know about accessing shared folder through BT, but after trying and trying AND trying, I was finally able to do an activesync through BT. The catch was to make sure PC has a BT "COM port" assigned. and then create partnership with PC's "Activesync" service (I had 3 listed..Dialup net,Activesync, and headset).
OOOOPS, almost forgot. make sure in Activesync settings that "Allow connections to one of the following" is set to the COM port assigned to BT.
Click to expand...
Click to collapse
You have had much better luck than I and the steps you have listed are pretty much all you need. My problem has always been getting the com ports that I needed. I am currently running Faria's aku3 ROM and it uses internet sharing and so uses bluetooth as a PAN. Makes life quite a bit easier all I had to do was tell the phone to use bluetooth PAN instead of USB and I was able to use map a drive between the phone and my PC.
Kirby
ntegra said:
Sorry for butting in....
I don't know about accessing shared folder through BT, but after trying and trying AND trying, I was finally able to do an activesync through BT. The catch was to make sure PC has a BT "COM port" assigned. and then create partnership with PC's "Activesync" service (I had 3 listed..Dialup net,Activesync, and headset).
OOOOPS, almost forgot. make sure in Activesync settings that "Allow connections to one of the following" is set to the COM port assigned to BT.
Click to expand...
Click to collapse
yes, thats all right, thats exactly what i use. a bit tricky but still easy thing to do, thats why i didn't list the steps. so as i said i have activesync connection working both on usb and BT, i can use my pc's net connection while hooked to pc and so on and so on. the only thing is that i can acces my drive using Async usb, and i can'd using Async BT. question is why... i went even looking into bluetooth drivers settings on my pc, but no luck here... and since several weeks noone seems to know the answer...
rkwhyte2 said:
You have had much better luck than I and the steps you have listed are pretty much all you need. My problem has always been getting the com ports that I needed. I am currently running Faria's aku3 ROM and it uses internet sharing and so uses bluetooth as a PAN. Makes life quite a bit easier all I had to do was tell the phone to use bluetooth PAN instead of USB and I was able to use map a drive between the phone and my PC.
Click to expand...
Click to collapse
I'm not exactly sure what PAN is, could you explain it please? is it personal area network? where do you set this?
I'm sorry if i'm not the first who askes this:
- is there any way to connect to lan trough buetooth?
I've got the orange spv m600.
Is there a widcom driver for this?
Thanx a lot for your help
No, that's what WiFi is for.
Yeah, i know, but at home i've got a bluetooth acces point which i use to connect 2 laptops to lan. So i also wanted to do this with the prophet.
Now i have to use a computer with active sync to connect to the internet, but i cant acces lan that way.
Good Question
Wifi aside......it would be handy if we could use bluetooth to connect to the lan setup even if just to transfer files. Theres a program for palm that does a similar idea. But I guess really it IS down to having to use wifi for now.
Bluetooth security has always worried me anyway.
bluezard
I can transfer files with bluezard on wm5 using filetransfer profile
other options for lan and other profiles are also there but i have no way of testing them