Just to let anybody who's not happy with the XDAIIi know that I've just got a full refund on my unit from Carphone Warehouse.
They gave me the usual rubbish of "only 14 days to change mind after upgrade," "28 days warranty" etc, and initially refused a simple refund, saying I could only return the unit for repair under my insurance policy.
So I returned the unit along with a two page document of all the problems: camera bug, phone not re-establising signal, GPRS failing to connect, erratic battery drain, no blackberry, tom tom incompatible, alarm bug, poor microphone quality, and of course the good old device lock ups. This was nicely cross referenced to the advertised features of the device, with just the merest hint that the unit wasn't fit for purpose
Anyway, I called them yesterday to find out the repair progress, and they've admitted defeat and given me a refund.
It's a shame really, I would rather have a working XDAIIi with WiFi than my current XDAII, but it was driving me mad. Maybe I'll retry the device after the new ROM comes out, but I'm not holding my breath.
Andy I was having many of those problems on my IIi, however I slapped on the iMate ROM and it's all cleared up - tomtom5 works a dream and that annoying SMS indicator that sometimes never goes away - now actually goes away!
Hi Andy, When i fist got my shiny new XDA2i i too was slightly miffed at the ammount of bugs and lock ups it had.
But after finding this site and i removed the custom O2 crap i have never looked back since.
The battery was my main grumble but that only lasted for the first week, i can now use my PDA playing mp3s all day and still have power left the next day.
the only grumble i have now is the ****ty camera, which is tottaly below standard for a 1.3 m camera.
And i know ... if you want a digital camera go buy a proper one springs to mind but i like having a decent camera (or it should be), on my phone
advice ... Stick with it for a while, install the new I-mate rom and all is good ... NOW WHERES WM2005 !!!!!!
I still find it incredible that the latest technology, hailed as flagship products are rushed to market in this state, what do they have to gain from that? It cannot be good for business surely.
Forgive my ignorance, but where can I get the iMate ROM please?
David
upgrade for xda2i
Hello, someone mentioned slapping on the imate rom to xda2i...but how did you do that? I have a qtek rom. I tried to do an 'upgrade' with an o2 rom but got the famous country error code. Is there a way of changing rom for xda2i? What was your original rom?
I appreciate your help. a.
Danny-B- I always remove the O2Active junk, indeed ran the device in a clean "corporate" mode for a while to check that it wasn't something I was installing causing the problems, but it made no difference to the stability.
Thanks for the info about the PDA2 rom being available and comaptible (hey ho it's a bit late now!) but it bodes well for a future O2 rom release. I might try the device again when there's an official release.
Heres a link to the Imate upgrade thread, I'd read the hole thread before hand though as i also had the country code error and had to change that too.
http://forum.xda-developers.com/viewtopic.php?t=23736
There is a link to the wiki page on how to do that.
Hi all,
I currently own Blue Angel and have a write protect screen saver. Waiting for o2 Exec release hopefully next week. My first question being is the screen size the same and therefore no need to wait for a new screen protector especially for Exec? Also at weekends I may decide that the Exec is too big to carry around in jeans. I have an old Sony Erricson T68. I am right in understaind that o2 will send out a new 3g enabled SIM. Will this 'new' SIM work on my old T68?
Many thanks for taking the time to read this.
Regards
Tom
(Blackburn UK) :?
I've got a lot of problems when my sim card is inserted in the wizard.
Sometimes I can boot the device and it's working OK for a couple of houres and then suddenly it's hanging or crashing.
The screen starts to get white and then stays white.
Then it's almost impossible to boot. I made a video to let you guys see what is happening.
There is WM6 on it right now, but it doesn't matter which rom I use.
Also with the original rom it's crashing. I've send it back to Q-TEK and the fixed it (they say)
but it's still crashing. The only problem is that the phone is out of warranty now, so I can't send it back anymore.
Can you guys help me out? I can't use the device right now because it's crashing all the time.
Video can be found here: http://rapidshare.com/files/21192794/DV070315001.avi
If you are having problems with the full original ROM package (e.g IPL/SPL and OS), then it seems like a hardware problem. As for the warranty, you may want to check with 'them', some products have a 'renew' warranty on the latest fix. E.g., if your phone is fixed today, it will have a new warranty (3 months or 1 year) staring tomorrow.
Unfortunately I had some water damage after they tried to fix it. (3 months later it got into the water)
The device is working as before and don't have any problems because of the water, but I've got a big red paper under the sim card.
So no warranty anymore
Do you think it's the gsm module?
Can I buy that "somewhere" to replace that part?
OKay, found a site where I can buy wizard parts.
Do you think I need to replace one of the boards?
And which one do you think?
There is a mainboard and one board that's smaller (with ribbons on it)
It's obvious it's something to do with the sim card. Try cleaning the contacts on both the phone and the card and if you can try another SIM card.
Failing that, I would suggest carefully stripping it down and sell the individual parts.
Use the money you get to buy another Wizard or another phone of your choice.
Just a thought. There are alot of people who would buy the components to replace broken plastics, screens, speakers...... etc
The sim card is OK. I tried many sim cards.
All the same problem. It's just something in my wizard
I can buy a new mainbord, but I don't know which one I must buy. There are 2 of them..
About a week ago my screen got some weird colors on the right side of my Touch (and I didn't even drop it). I have one more week left on my warranty (talk about lucky).
My question is, if I send it to get it fixed will HTC send me a new phone or will they just fix the screen? And if HTC does fix my phone will they upgrade it to WM6.1?
Oh forgot to ask when I send it in should I remove all apps I put on my phone, so they don't hassle me about it.
Thank you.
I think they will just fix the screen as the screen is not a software issue. Or unless the OS has a glitch other then that I don't think they will upgrade it for you
I talked to Rogers, apparently they'll send me a new Touch and I send them back my unit. We'll see...
Its probably dead pixels. It happens sometimes with LCD screens. If they can fix it, they probably will. Though I'm not too sure if you can 'repair' dead pixels. They might replace the LCD or just the entire device. Your probably not going to get WM6.1 on your device since the official release of the HTC touch never came with WM 6.1. That came along for all later versions. If you want WM 6.1, I'd recommend flashing a ROM.
Hello
First i would like to mention that i went thru wiki and the forum and i could not find a thread with similar problems.
The problem is in the built in camera (or in the user)
As soon as i turn on the camera to take a picture it doesnt work. On the display the icons are showing like the camera is ready but it is just dark display.
So i pressed the button to capture an image just to see how will the camera react. As i pressed the middle cursor button after some 20-30 second on the display appeared following lines:
Unable to save captured image
unable to get data from camera device.
36003:500:2
I must say that i have problems with the camera module from the very beginning. I was hoping that the latest flash with Tomals SW will improove the camera drivers but this was not the case. Maybe i have to install some additional drivers? I just cant get the bloody camera to work.
Anyone has some idea why my camera does not work?
Besize that my qtek is working just fine.
Thanks 4 the answers.
Best regards from Slowenia.
Peter
Welcome to forums
I had a similar prob and solved changing the ROM
Good luck,
Hello orb3000
Thanks 4 the welcome
i upgraded my rom just 2 days ago with: TML871_WM61_21028_REGULAR_128MB.exe
but it does not change the status of the camera.
so i feel a little helpless
Peter V8 said:
Hello orb3000
Thanks 4 the welcome
i upgraded my rom just 2 days ago with: TML871_WM61_21028_REGULAR_128MB.exe
but it does not change the status of the camera.
so i feel a little helpless
Click to expand...
Click to collapse
Try another ROM, just in case. Generally a factory ROM would give a good indication of whether there is a problem and eliminate other possibilities. So I would recommend flashing it just for your peace of mind.
As far as Tomal's ROM is concerned, provided your device is 128Mb and ROM functions as it should otherwise, one of the reasons for non-working camera is the module itself or the mainboard. Hopefully its the camera module, as they are relatively cheap and very easy to replace and no special knowledge is required, as well as minimal device intrusion, so you will be able to replace it yourself. I think i saw the camera module at some of my suppliers, let me check if still available, alternatively, a working second hand part can also be used, I might have one in my toy box somewhere.
Thank you so much. I will yet again update the rom and than i will report how it went. So if it doesnt work, i would be happy to purchase a camera module from you. Replacing it will not be a problem as i have no problem with the mechanics and electronics in general :-D:-D:-D
I also stumbled upon a DIY side in this forum, regarding the universal.
So which rom would you recommend me?
Thanks
:-D:-D
Peter V8 said:
Thank you so much. I will yet again update the rom and than i will report how it went. So if it doesnt work, i would be happy to purchase a camera module from you. Replacing it will not be a problem as i have no problem with the mechanics and electronics in general :-D:-D:-D
I also stumbled upon a DIY side in this forum, regarding the universal.
So which rom would you recommend me?
Thanks
:-D:-D
Click to expand...
Click to collapse
Factory ROM is the ROM your device came with originally, out of the box.
Peter V8 said:
So which rom would you recommend me?
Click to expand...
Click to collapse
WM 5... as Uni came in with WM 5.... so in my case JASJAR.. and T-Mobile rom... is factory default for my 2 uni....
That could be a problem.
i have been given the qtek 9000 by my boss as he bought himself a tuch diamond pro and he gave me the qtek becouse he knew that i was so enthused about it. :-D:-D
Sadly the PDa came without any CD so factory rom is out of question. He somehow lost the CD so all i had was the phone, the usb cable and the charging unit.
try the wiki first!
http://wiki.xda-developers.com/index.php?pagename=Universal_Upgrades
Otherwise, someone may have it. (I've got SPV M5000 if you're interested)
The wiki has only the country or operator specific downloads. Since i`m from Slovenia there is no operator or SW for our operator on the list.
So i probably need an english version since the qtek in our country c<me only in english version.
Just get WWE for QTEK, or try other WWE ROMs. BUT make sure you have the Slovenian settings on a .CAB or check if they can be sent by your provider.
Peter V8, don't forget to update the wiki if you find what you were looking for... and it wasn't in the wiki. 30 people will (not) thank you, but appreciate it.
As soon as i find the problem i will update it to wiki no problem. If the camera is broken and it need to be replaced i will document the procedure with photos that i will take during the "operation".
Sadly my battery bloated a little bit (no chemical spill so far ) and i took it out of my qtek to protect it from damage. So now i am stuck with nokia N90 until the new Battery arrives that i ordered. So when i will have the new accu i will find the error that the camera is having and report it to wiki and forum.
Peter V8 said:
As soon as i find the problem i will update it to wiki no problem. If the camera is broken and it need to be replaced i will document the procedure with photos that i will take during the "operation".
Sadly my battery bloated a little bit (no chemical spill so far ) and i took it out of my qtek to protect it from damage. So now i am stuck with nokia N90 until the new Battery arrives that i ordered. So when i will have the new accu i will find the error that the camera is having and report it to wiki and forum.
Click to expand...
Click to collapse
A battery 'bloated a little bit' means it got wet, which might mean liquid damage to your device and the reason your camera might not work. Even if you replace the battery at this stage, if the main PCB got wet, it will corrode and your device will die, slowly, but surely.
I am fully aware of this problem, but the new battery bloated (i replaced it 3 months ago) and the camera doesnt work since i have the qtek (1,5 year). The little white paper stripe under the sim card holder didnt turn pink and also the battery isnt wett also the phone is not wett. Well we will see when i get the new battery. It is under warranty so if the battery damaged my beloved phone, the company that sold me the new battery 3 months ago will not get so easy of it. Here in Slovenia a well preserved qtek 9000 still costs arround 250-300 Euros.
A little update:
I bought myself a newer working qtek 9000 with partialy broken LCD for 30 Euros. So i placed the battery into my qtek and it works perfectly. Apart from that i am still waiting for my brand new battery to arrive from germany. So i fully charged the spare battery, did a DOC reset and flashed the qtek with Tomals ROM.
The camera however still doesnt work, so it is not a SW problem. Since i have bought the broken qtek 9000 for spare parts, i will take the camera out and replace it. So probably this weekend i will do the "service" and i will take pictures of the procedure and update the forum.
Peter V8 I also face a similar problem since my 2 days Ebay bought 02 Xda Exec's camera is full of white, red, green dots either in photo or video mode. Changing roms didn't help at all and its truly a pity since the phone seems like it came straight from the factory, although used. My dilemma is either paying about 20 Euros to ship it back or waiting for your endeavor to complete but since I overall truly like the phone I will wait and see
Peter V8 said:
A little update:
I bought myself a newer working qtek 9000 with partialy broken LCD for 30 Euros. So i placed the battery into my qtek and it works perfectly. Apart from that i am still waiting for my brand new battery to arrive from germany. So i fully charged the spare battery, did a DOC reset and flashed the qtek with Tomals ROM.
The camera however still doesnt work, so it is not a SW problem. Since i have bought the broken qtek 9000 for spare parts, i will take the camera out and replace it. So probably this weekend i will do the "service" and i will take pictures of the procedure and update the forum.
Click to expand...
Click to collapse
There is really no procedure worthy of taking pictures, once you remove the back, remove the large white antenna part and you will see where camera clips in. It's a fairly straightforward flex clip connection.
Little update again.
As i mentioned earlyer, i have bought myself another spare parts uni with broken tft. Ok so first.....i took apart both unis (didnt took no pictures becouse the pdf DIY to disassemble and assemble the UNi is more than helpfull, so you have to be a complete non technical type of human, or you have cerebrall palsy, or you must be a dee tii deee to not understand or grasp how it is made) and puted the tft from my uni in to the spare part uni. It worked perfectly and it had WM 5,0 the original. So the camera worked , everything worked-sim card....everything. So yesterday i flashed the uni with Tomals last ROM (Tommal the rom is working perfectly on my other uni so the SW is just fine) And somehow the uni had problems to work when my SIM card was inserted. So i removed the sim card and the uni worked perfectly. I dont know wath the problem is (probably a sim lock or somethin, but odd enough it worked with WM 5,0) so as the forum was down yesterday, i just dissasembled both unis again, putted the tft back in to my uni and putted the camera which worked just fine in the spare parts uni, in to my uni. And guess what.............the camera is still not working. I have done the hardreset but still.........even as i replaced the camera i still have the mesage......unable to get data from camera bla bla bla.....error 36003:500:2
So there might be a problem with some drivers or something in that way. I am pretty on the end with my knowledge now. How can i find the erorr or the couse of it???
If someone knows i would be very happy uni user :-D
So the problem is still not solved. Otherwise the uni is working perfectly only the camera gives me hard time.
Best regards
Peter
Peter V8 said:
If someone knows i would be very happy uni user :-D
So the problem is still not solved. Otherwise the uni is working perfectly only the camera gives me hard time.
Click to expand...
Click to collapse
seems like the problem is with motherboard rather than the camera...