Related
This is the time to write down ALL the bad things of this buggy PDA. I've encountered ALL of these, and have NO solutions to these, and I've tried ANYTHING.
I'm bored to have a PDA which colud be assembled and tested WAY better; but that is.
Note that mostly are device specific (huh, in my case I'm VERY lucky, I've encountered them all )
My Device:
1) doesn't wake up when cold
2) have BIG problems of RF leakage that caused
2.a) hard reset when registering network
2.b) degradation of the external speaker
3) has a crappy camera
4) has deficienty GPRS (now inaccesible because the RF leakage)
5) has by now damaged ExtRom with fixed Imate logo
5.a) this cause the warranty to Vanish. Puff!
6) has double incoming calls, that seems only I have
7) has a null customer care; expansys SUCK
feel free to add link that would resolve these prob... and other known mess of course...
From: MocciJ[/i]
Sorry you have so many issues. I have experienced none of those things with my JAM since May 2005. There was the GPRS issue with a certain ROM, but that has long since been resolved.
While I sympathise with your individual bad experience with your HTC Magician, this is not shared with most of the members/owners here.
I don't agree with the way you have numbered your complaints just to make the list look longer. This is because most of them are all related to one technical problem (RF leakage) and a bad attempt to fix this problem by installing other ROMS that has lead to more software problems.
I have to agree with you on the crappy camera one ;-) although by all means this is an average quality mobile phone camera and not a digital camera replacement.
You cannot blame Expansys' bad customer care on HTC either.
Bear in mind that the MDA Compact is one of the most succesfull PDA phones for huge carriers such as T-Mobile!
Sorry to hear that but that cannot be said of the magician in general. My Qtek ist working day in day out just perfectly and is by far the most reliable phone/pda I ever had, way better than Ipaqs and Nokia phones.
The camera is not that bad either. Once set up correctly (maybe you should do that) you can get some pretty good pics out of it after photshopping them a little and resizing them down to 640x480. They look far better than the one from my old Nokia 7610. Maybe the difference is that I dont expect the cam to rival the one of my 4megapixel Sony.
And HTC will never offer customer care because they dont sell the devices. If anything sucks here it is iMate. I never need Qtek support so I cant say anything about them.
What about the pros?:
- Its small and lightweight
- It has nearly all com modules except WLAN (can be added with SD-card like Spectec), and who need 3G/UMTS anyway?
- It has lots of power (esp when using PHM)
- It has a great screen, bright and hella sharp
- It sounds great (call quality way better than with the 7610)
- Its has massive RAM in the S110 version
- It is plain sexy
Yea..i agrees with others...frm the day i bought my xda mini..its not giving me problems so far....its compact and sxy too
Yeah me too.
My Orange SPV M500 works almost fautlessly. I don't really use the camera much but then I have a 'proper' digital camera for taking pictures.
I say 'almost' because sometimes, to use GPRS I have to reset the radio by going into and then out of flight mode.
It has to be said that this forum is littered with people who have tried to 'upgrade' thier PDAs by flashing the ROM and have come unstuck.
Yeah, I agree with you all, but now I have these probs. I upgraded it the first time to see if the "low temperature wake up" thing had resolved. I accidentally putted in the Imate ROM, because the ROMs on the FTP site aren't signed. After TWO months of QTEK "repairing" they said that the unit isn't repaired (they cannot upgrade the rom); after trying to contact those idiots by call and e-mail we finally had a transparent service.
After ONE week of using the RF leakage came... and made it. It somehow damaged the PDA. I assure that isn't a software problem, cuz I have tried 4 Radio Stacks: no solves.
I IMPLORE xda-developers to SIGN the ROMs that are placed in the ftp.
Hope U will understand me. I know that there are also good ones out there, but mine isn't. Sorry.
NB: the camera is awful in semidark and dark conditions: otherwise it can take relatively good pictures. AND after 2 week of use, I noticed that the video longer than 20 secs have distortion: and this before upgrading anything.
#by moccij
Ive had my MDA Compact, now flashed to Imate for a few days now and after numerous incompatibilty issues with applications, I have a rough idea what programs to steer clear from so no major problems. Thought I was having probs setting up my Orange GPRS connection but after realised that is wasny going to connect as out of credit.... Duh me, looking for techi reasons instead of obvious ones lol
Are you Evrae who used to make all the Symbian themes on mobile9?
My JAM is one of the best PDA/Phone I have ever had...
it's small, good looking and had it all ( except WiFi and KB )
and after proper tweaking and installing newer ROMs.. it's really fast.. stable, and extremely reliable...
I agree that camera sucks... but in good light conditions ( ie. outside in the sun light ) picture quality are awesome especially if you photoshop them... some of them are printable!!!
Video on the other hand is the best thing in this device... It's much more reliable than normal phones with cameras that can record video.. resolution is higher, and can record for unlimited time in AVI + MPEG formats ( + 3GP with a registry hack ) and this is much better to me than STILL Photos
anyway.... I hope you'll find solutions to your problems... search the forum for more info
cheers
Duke911,
I agree with you that the camera can take some wonderful pictures, and retouching them in pocketartist on the go is a very good thing. But I'm still in trouble with videos: the first 20 secs are ok but after these the video is flickering in a horrendous manner. Have tried anything .
But I'm still very happy. Even if my Qtek has half blowed up the radio, it remains a PDA: and what a PDA! WAY fast and stable, I only need resetting it when cold. A thumb up for this! I'm using it as a normal mp3 player with some great gamez to play...
Cheers,
MocciJ
MocciJ, why don't you install the original factory ROM and send it over at the service centre for repair?
As you said it's a very nice pDA but it's a pity that yu can't use it as a phone!
KTA, I've tried ALL methods to downgrade to the Qtek ROM or simply to have the Qtek logo. Simply I can't, because the upgrade process give me the error 113 when writing extrom... I've tried at least ten different ROMs without results... It seems to have damaged extrom
For the repairing center, I'd already send it; for half month I had no responses, the other half they tried to repair it without success. They said that I must pay 269€ for a new motherboard...!
Now that I'm in all these problems, buying another one is less expensive than repair it... The case is also scratched (even the screen)...
Do not support mumsms+!!!!!
Seen on another forum .. thanks taxman .. bought this .. seems like a cheap package overall ..
http://www.t-mobile.co.uk/Dispatcher?menuid=m18_relax_300_MDAVarioCP
joker3001 said:
Seen on another forum .. thanks taxman .. bought this .. seems like a cheap package overall ..
http://www.t-mobile.co.uk/Dispatcher?menuid=m18_relax_300_MDAVarioCP
Click to expand...
Click to collapse
Looks good - Another T-Mobile page still shows the Vario with Co-Pilot on this tariff at £119.99
Yeah , it is under "special offers" - look under the "300 mins for £14.50 for 12 months" deals
Thanks joker3001 ! just ordered one
Was looking for a reason to buy a Wizard anyway (or at least something to justify it to the wife :wink: ) and the Sat Nav does just that !
Soon , the battle between the Universal & the Wizard will commence - pending a T-moble credit check of course :lol:
Cheers dude
Is this phone any different from the SX56?
I just installed the XDA ROM software into my SX56 and unlocked the AT&T phone which now accepts TMobile (the phone accepts my SIM card and TMobile made a call to me which came in). I am paying $19.95 a month and have had the service for about eight years
The problem I am having is that my phone screen now doesnt respond properly: Touching it causes the backlight to go on but most of the keys dont do what one would expect them to do: The phone turns on with a reminder from the calendar on the screen which wont DISMISS or CLOSE. Pressing on the windows logo and then on the phone key causes the calendar to come up and I am not sure which numbers are entered when I do manage to get the phone to come onto the screen (none of the right hand numbers seem to work at all). Does anyone recognise these symptoms and/or could they just show that my SX56 needs the ROM RE-flashing? I should add that pressing the Master Reset button with this ROM in place seems to make the phone shut off and then when you restart it, all of the data remains in place. I wonder if there is any possibility that the XDA ROM has prevented the reset button from working normally?
But then I saw this ad: The SDA site implies that all these phones are the same under the skin although an article written in 2002 http://wiki.xda-developers.com/uploads/tmobile-pocketpc.pdf implies that the manufacturer was coming out with some different processor at that stage and that the processor in the Wallaby was then already obsolete: Does anyone know if this phone represents any advance on the SX56 or is it newer or is my phone exactly the same as this one or is my SX56 actually better? (I already have the COPILOT software independently). Or is it just the same walllaby in a different casing which TMobile are tyring to get rid of because the manufacturer is as uncooperative iwth them as they are with anyone else?
Anybody had any luck with this?
I just called T-Mobile sales to ask what was included with the Copilot kit and was told that they are not honouring this offer due to a mistake. Worth a try anyway?
Mistake, but IS this phone any different from the SX56?
What the mistake was may be relevant: I just called them and they said they WERE although they had at first said that the CoPilot was extra and wasnt included with the price. I didnt take it any further as I couldn't figure out whether the phone they are offering is any different to the one I already have
Re: Is this phone any different from the SX56?
The problem I am having is that my phone screen now doesnt respond properly
Click to expand...
Click to collapse
Sounds like the digitiser is up the swanee - have you tried recalibrating it?
is it just the same walllaby in a different casing which TMobile are tyring to get rid of because the manufacturer is as uncooperative iwth them as they are with anyone else?
Click to expand...
Click to collapse
It's a completely different phone. The Vario is an HTC Wizard with T-Mobile branding. There's plenty of info on this site on the differences between models.
Re: Mistake, but IS this phone any different from the SX56?
licensedtoquill said:
I couldn't figure out whether the phone they are offering is any different to the one I already have
Click to expand...
Click to collapse
Never heard of Google, or even http://wiki.xda-developers.com/?
Pricing mistake
The sales chap I spoke to said that the free Copilot offer only applies to other phones - it should cost £120 with the Vario. However, he said he works for direct sales, not the web sales team, so advised me to give it a go anyway, which I have done. It's before the 7.30pm cutoff for next day delivery, so I'll give you an update tomorrow...
Re: Pricing mistake
wrightbyname said:
The sales chap I spoke to said that the free Copilot offer only applies to other phones - it should cost £120 with the Vario. However, he said he works for direct sales, not the web sales team, so advised me to give it a go anyway, which I have done. It's before the 7.30pm cutoff for next day delivery, so I'll give you an update tomorrow...
Click to expand...
Click to collapse
Their "mistake" excuse is weak - if it is, why haven't they taken the page down?
It clearly states on that page Vario with co pilot. Whats the problem ? Get it bought :lol:
Re: Is this phone any different from the SX56?
"Sounds like the digitiser is up the swanee - have you tried recalibrating it?"
Not sure how to reclalibrate it but the problem appears to be that I dropped it and 10-12 vertical black lines started appearing to the right hand edge of the screen. Sometimes they are there, sometimes not. THere is usually at last one there somewhere. At about that time the screen stopped responding as I mention. Today the left third started displaying the same veritcal lines, though spaced quite far apart (about a millimetre). Screen doesn't APPEAR cracked: Does this sound like a digitiser and if so, how do you recalibrate it please or is there a link to somewhere on the XDA site which I cant find which might tell me? Or could it be the cable loose in the circuit board? As you touch the lower right hand corner of the metal casing where the vertical lines are, those lines flash (the right 10 or 12) on and off and every coloured bar everywhere on the screen or word of text has vertical lines on it even if the white parts don't??
(BTW FWIW I am in New York and couldn't take advantage of the .co.uk offer but was just wondering how they could give the unit away so cheap unless it was essentially the same as the 2002 units which are described on the XDA site)
Success! (I think)
Just checked my email on arriving home and my order has been confirmed by T-Mobile so it should be with me tomorrow. Still odd that they show it at £120 on one page and free on another, but I'm not complaining!
Re: Is this phone any different from the SX56?
@licensedtoquill - to me it sounds like you've dislodged the connections to the screen. Youcould try taking the thing apart and reseating it, but it's a delicate job and not for someone who's not used to dealing with miniature electronics. Might be work looking for a repair facility - PPC Techs have a good reputation.
As for why the phones are so cheap over here, the network operators will do anything to get you signed up to a contract, as that's where they make their money. It's easy to get a free top line phone if you chose the right contract. Especially one like this which locks you in for 18 months as opposed to the normal 12. They're banking on the fact that even with the 300 free voice minutes, you'll still ramp up the bill with SMS and GPRS over the life of the contract. That's why they put the unlimited half price rental "loyalty" bonus at the end to make sure you stick out the full term.
Mine is confirmed too - should be here before one tomorrow
The Guy on the phone (had to phone to confirm some details) said the deal was so good that they (the web sales team) were all snapping them up too , and that the deal was subject to stock , and that stock of the copilot kits would probably be exhausted by the end of today
No mention of a mistake at all :roll:
@zoidster: what time did you order yours? I needed one and did not have the time to order w/o co-pilot earlier in the day and this looked too good to be true. I got confirmation around 9:30PM UK and hope the stock is not finished yet.
It was about 4.30pm mate - mind you , in "sales speak" a few left probably means several thousand :lol:
If your order was confirmed & they charged you the £5.99 for next day delivery then I'd guess they had stock left
Thanks, I got confirmation and should be with me tommorrow.
Thanks for the link, saved me 50 quid.
Got mine !
yesterday , I managed to navigate to the deal via the homepage
tried again this morning and the same deal is now £199 !
Does this package come with a gps receiver as well??
After owning it for 5 month, I got rid of my Qtek 9100, it turned out a piece of junk..
First the Mail and Internet Explorer keys peeled off, then the gray paint on the sides peeled off, then the keyboard became loose, then the stylus began to fell off by itself...
I don't know what my next PPC will be, I am looking into something more rigid now.
naughty said:
I got rid of my Qtek 9100, it turned out a piece of junk..
Click to expand...
Click to collapse
Blasphemy...... and in a wizard forum!
I know what you mean though - maybe a prophet will do you, some times i think i would have preferred a prophet being slimmer more rigid and 2mp camera. But today when writing a long text. i know why i like the wizard - the keyboard
naughty said:
After owning it for 5 month, I got rid of my Qtek 9100, it turned out a piece of junk..
First the Mail and Internet Explorer keys peeled off, then the gray paint on the sides peeled off, then the keyboard became loose, then the stylus began to fell off by itself...
I don't know what my next PPC will be, I am looking into something more rigid now.
Click to expand...
Click to collapse
Alrighty - Dont let the door hit you in the ass on the way out. Exactly what did you hope to achieve by coming here and posting? Were you hoping to justify your decision to yourself.
Bratag said:
naughty said:
After owning it for 5 month, I got rid of my Qtek 9100, it turned out a piece of junk..
First the Mail and Internet Explorer keys peeled off, then the gray paint on the sides peeled off, then the keyboard became loose, then the stylus began to fell off by itself...
I don't know what my next PPC will be, I am looking into something more rigid now.
Click to expand...
Click to collapse
Alrighty - Dont let the door hit you in the ass on the way out. Exactly what did you hope to achieve by coming here and posting? Were you hoping to justify your decision to yourself.
Click to expand...
Click to collapse
I just wanted to share my disappointment. I will talk to you after you own the Wizard for 5 months, PM me then with feedback.
Well I've had mine for 6 now, and here's my experiences...
- it's slower than expected ( yes, I could overclock, but really.. I don't want it faster that badly )
- the paint peeled off the IE/Mail/Soft key buttons.. ah well, big deal - the mail button goes to the start menu and the IE button clicks on the app close button, so the icons don't match my functions anyway.
- no paint peeled off the sides yet
- no loose stylus yet (I tend to collapse it before inserting it - maybe that reduces stress on the part that breaks off?)
All in all, I'm quite happy with it. Sure, I would've liked it faster, and maybe 640x480 would've been nice (and built-in GPS, FM radio, a 3.5mm headphones plug, better volume on hands-free (oddly, an episode of stargate I put on there plays quite loudly - so it should be possible.. haven't tried those reghacks yet), maybe a scroll wheel, and a 2-3MP decent camera would've been plusses)... but here's the thing... None of the devices out there that fit that bill (to greater or lesser extent) appeal to me. They're either even bulkier and less practical to me (e.g. Universal) or their button layout irks me (Magician, and upcoming 'Wizard replacement' Hermes), etc. Form-factor wise, the Wizard suits me best, and that's why I got it - the slightly slower performance (I noticed it in the store) wasn't so much an issue for me.. I'm not using it to play the latest 3D game.
I have had my QTEK 9100 since January and I have to say that it is the best phone I have ever owned. Of course it is my first Pocket PC so that doesn’t give me much to compare to. It does have some small issues but overall, I am glad I bought it. I am also experiencing the stylus fallout issue but plan to try the suggestion offered in another thread once I receive my replacement stylus next week. No issues yet with the paint but that is not important to me because I have reprogrammed most of the buttons to perform another function anyway. I also find it a pain to have to hard reset when upgrading the ROM or sometimes the device just starts acting weird (like windows 9x) so I just reformat it. Long process but it works. I would have to say that this device is not friendly enough yet for the average consumer but this forum has been a great help with resolving issues and offering tips. I think I would have gone nuts if it weren’t for this forum! The QTEK website is useless for help or ROM updates so I will likely not get another QTEK but will consider the same model from another manufacturer.
keitht said:
The QTEK website is useless for help or ROM updates so I will likely not get another QTEK but will consider the same model from another manufacturer.
Click to expand...
Click to collapse
I just updated to last ROM using Qtek website, all what you have to do is registering your IMEI in their site, and then you can download any new ROM for free with instructions how to do it, plus there is area fo registered users where you can download Tonerings, games, appz etc... for free. Just wanted to defend Qtek Site and clearing this misunderstanding.
naughty said:
After owning it for 5 month, I got rid of my Qtek 9100, it turned out a piece of junk..
First the Mail and Internet Explorer keys peeled off, then the gray paint on the sides peeled off, then the keyboard became loose, then the stylus began to fell off by itself...
I don't know what my next PPC will be, I am looking into something more rigid now.
Click to expand...
Click to collapse
Thanks for sharing your experience.
I had the same paint problem with Himalaya device (qtek2020). I suppose this is due to wet hands I also have the same problem with my notebook ASUS M2Ne. But the problem is solved by annual ordering of the case for notebook and I suppose you can order cases for your handhelds too.
As for now, I don't have any problems as you did with wizard. I will try to be careful with mentioned areas
Thomas1234 said:
keitht said:
The QTEK website is useless for help or ROM updates so I will likely not get another QTEK but will consider the same model from another manufacturer.
Click to expand...
Click to collapse
I just updated to last ROM using Qtek website, all what you have to do is registering your IMEI in their site, and then you can download any new ROM for free with instructions how to do it, plus there is area fo registered users where you can download Tonerings, games, appz etc... for free. Just wanted to defend Qtek Site and clearing this misunderstanding.
Click to expand...
Click to collapse
Wish it was that easy... tried that and they claim my number is not valid and that I need to contact the vendor where I purchased for updates... well that vendor is EBAY so I am SOL on that. So I rely on this site for my updates.
@keitht :
I guess that the person - who sold this to you - registered the IMEI already therfore you have to know his Username and Password to login, or tell him to delete the IMEI from his account, then you can register your imei for your account.
I don't know if you can reach the seller anyway, but I think this is what happened and this what can be done to solve this problem.
BTW I am happy with the Wizard, but this is only my 3rd day using it , that means this thread doesn't count me.
with regards to the paint peeling off... no, that's not normal, really. If you want these things to last, then you don't use decals (cheap keyboards use these... you'll see the letters 'chip' off) or paint (slightly more expensive keyboards.. the letters will fade) - you use cut-outs or impregnation. On the Wizard, for example, check the green/red phone buttons (when they're not backlit). Those will never fade or chip, as they're cut-outs.
Note that they could have used cut-outs for the other buttons as well, but cut-outs are slightly more expensive, and it would be even more expensive once you factor in branding (e.g. T-Mobile would need a whole special cut-out for their HotSpots icon instead of the IE icon - whereas now, that's just a different stamp)
However, even given that it's not normal - it *is* common, and I've just come to expect it from anything that uses decals/paints for any graphics/lettering. You lean to live with it, unfortunately
I have had more than 10 different pocket pc's and 2 different pocket pc phones in the last 5 years and have to say that my Qtek 9100 is my favorite handheld device yet. It has a great battery life, does not lose data if the battery dies, works great as a web browsing tool, computer, and phone, and also works remarkebly well with bluetooth. I find it to be the first converged device I have owned that I can just use, without having to constantly fuss with it to make it work. It is far from perfect, but definitely good enough for my purposes so that when I travel I do not need to carry my laptop, as it fulfills all my computing needs, albeit with a slightly less than ideal user experience. I am more than willing to put up with the minor idiosyncracies of the device when I consider how many devices it can fill the gap for.
I'm using my Wizard for 7 months now, and it's definitely the best PDA/phone I've ever had. Ok, the build quality isn't on par with brands like Sony-Ericsson or Samsung, but the functionality makes up for everything. I use it for push-mail, navigating, browsing, contacts and calendar. When traveling by train, I hook it up to my laptop and use it as a GPRS-modem (I've got flat-fee GPRS from T-Mobile), zo I'm connected to the internet and the office. I use it at home on the sofa for browsing and MSN when my wife is watching stuff I really don't wanna watch (like soaps). In my car it's used as a navigation device (Adapt 300 GPS) and it's connected with my BT Logitech headset.
The paint hasn't scraped off anywhere, but the stylus comes loose too easy (a single wrap of tape around the black tip works fine).
Great phone, I'd cry if I had to miss it
I have the K-Jam since october 2005, so almost 8 month now.
For me it is also the best PDA in years.
It's the first PDA that lasts longer than half a year with me. :lol:
And I don't even see a suitable successor in the near future.
I don't face the problems with paint peeling off.
Ok, the mail and the IE button have faded a little, but that's all.
And, of course, the speed isn't everything, it could be improved.
The stylus is a little loose, but it doesn't falls out (yet)
And I am very, very pleased with the pushmail and A2DP.
I've had my Vario for around 6 months now, and don't see any of the problems the thread starter has found.
I treat my phone with care amd respect, in return it keeps all its paint on for me.
It may be true that the Vario build quality is not a patch on the MDA Compact, but it's still in good condition.
I've had my vario now for 3 months and the main problem I have with it is the stylus not holding as well as it did when it was new. No paint peeling off etc.
It may only be a 195mhz processor, but it is faster than my Treo 650 with a 312mhz processor.
I've used most of the Treos' and this is my first device on the 'dark side'! The treo is simpler to use, but the wizard was the closest I could get with the same size form. Unfortunately for Palm, WM5 is streets ahead of Palm os - maybe that is why they released the 700w.
Anyway, the 700 is not an option for me in the UK.
Connecting to 2 bluetooth devices at the same time, stereo bluetooth capability - all things treo 650 users wanted, multitasking - the list goes on. I can see me upgrading to the 3G version of the wizard when it's time to upgrade my phone in the future, in a little over a year.
When I was given the phone by T-Mobile, I wasn't going to use it, and just use my Treo 650, but the more I read about the vario and then used it, the more I liked it.
The wizard rocks.
I LOVE everything abouth my wizard! I'll upgrade only to wizard with microdrive (when ever it be)!
My 8125 is my first "Dark Side" device too. I've never been happier. The only thing I miss about PalmOS was the wonderful screen realestate on my Tungsten T3.
I've punished the case on mine pretty badly too and it's never chipped or peeled. The only thing that happened was that little rubber "foot" on the battery cover came off. I wonder if the various style of Wizard cases are built by different manufacturers? That could account for this.
hi there,
i'm new in this forum and i'm going to get a trinity shortly but i've read here some problems with touch screen or audio problem...
At the end, how much are you happy with your trinity? should you buy it again?
Thanks all
bye
pretty damn happy, best phone I've ever owned.
If I was buying new I would however go for the white version, the black still has issues with flaking paint.
I have a white one, great pda phone!!!
crash98 said:
At the end, how much are you happy with your trinity?
Click to expand...
Click to collapse
Compared to what? In comparision to my wife the Trinity means nothing to me... Regarding all other things: I am very happy... better battery and this device would be my last phone.
Very good machine
The problems you're referring to are fairly minor; Using the touch screen does slow down the running of the machine whilst the screen is being touched. This doesn't affect generally tapping/dragging/etc, but it only really noticeable when you're playing games that require dragging around the screen a lot. The audio problem seems to be that there's less bass reproduction if you install one of the "GPS fixed" ROMS (although I believe one of the ROMs now has a patch for this).
These are fairly minor issues though, other than that, it's a superb machine. Good size/weight, and very good performance. The added bonus of GPS (if you install the new ROMs) makes it a unique machine on the market.
Lee
for me it is only a cell or pda...
i'm happy for other important thing
wishmaster... yes, i agree with you... but if you are in this forum to read these thread something tells me that it's more than a simple cell (otherway get a 50€ (30£) motorola )...
Best PDA phone I've used. I gave a way my Tytn after getting my Trinity. If you don't need/want a keyboard, it is great.
Black peeling, D-pad and OK button are failing
Failing buttons forced me to use scroll wheel and 2nd OK button. I like the phone even more now
Waiting for HTC to get the bugs worked out before I send it in for repair.
I am really happy with my white Trinity since I installed the second Dopod rom and enabled the GPS feature. I cannot think of anything that my device does not do that is expected of a modern mobile phone.
It is the complete article as far as I am concerned.
It looks cool, is small enough not to look stupid when making calls, and is packed with a great operating system and software, and to top it all it is fully customisable to suit my needs and requirements.
No complaints here at all.
Ok then, just one.....When will Orange release the official rom update for the Gps to work on Trinity's that were purchased before they released them?
That for me would be the icing on the cake.
The phone rocks - can harldy keep my hands off it
It still ok but I'm not really happy.
htc still does not offer a gps update, the black coat is peeling off (already after one week!!!) and it has a bad w-lan adapter (bad signal and no working auto-detection wether the network uses WEP, WPA or WPA2 or a mix)
mikehockenballs said:
I am really happy with my white Trinity since I installed the second Dopod rom and enabled the GPS feature. I cannot think of anything that my device does not do that is expected of a modern mobile phone.
It is the complete article as far as I am concerned.
It looks cool, is small enough not to look stupid when making calls, and is packed with a great operating system and software, and to top it all it is fully customisable to suit my needs and requirements.
No complaints here at all.
Ok then, just one.....When will Orange release the official rom update for the Gps to work on Trinity's that were purchased before they released them?
That for me would be the icing on the cake.
Click to expand...
Click to collapse
Funny situation. the rom is available in Orange France, but the phone is no more available. And the rom seems to not be available in Uk, but the phone is available.
Happy, but it is my first day
Got my (white) SPV M700 this morning and within 1 hour I:
1- Connected to Activesync & synchronised my contacts, calendar, notes, emails...etc.
2- I went into the favorit > Sat Nav & downloaded Orange's Sat Nav program (It woked a treat - No ROM flashing or anything ) It actually guided me back home.
3- Called Orange & asked them to unlock my phone so I can use my O2 SIM.
It is a lovely piece of kit (Phone, PDA, Camera, GPS, 3G, WiFi) All in one sexy machine that happens to be 100% compatible with my BMW's BT (it downloaded the entire contacts list (500 of them) to the car's computer.
When I got home I've played with it a bit, then put it on my desk and wheeped at its beauty
The PDA part is ok, a little bit slow but bearable. Although I'm having problem with the phone part mainly getting disconnected when trying to answer the phone and sometimes it wont connect even if I have a full bar.
The best phone i've ever had. All in one: Phone, PDA, GPS, Camera.
I'll put it this way: I can't think of a better phone at the moment... It's got ALL anyone could ask for, in a very decent size. It's not perfect but keep in mind that it's a fairly recent model, and I have no doubt we'll get there.
The only thing I could wish for that's not there yet is a multi-touchscreen (cf. iPhone but not only), and as far as I know there's nothing on the market yet with that feature.
Thumbs up for you guys too, I discovered this site through a friend (just making my first posts, hi everyone) and I'm amazed by the quantity (and quality) of hard work you've all already put in to solving the existing problems and making things better for all. Keep up the good work, and big cheers...
My comparison is with a BlueAngel which I recently lost. Small form factor, brilliant display, noticeably faster wireless, great camera. IMHO the Trinity is a serious device...only problem now is what to do with my external GPS!
Its Awesome
I've had mine for about a week, I have the white, its so cool!!!!!
I had the 838pro before this which made it a bit bulky and heavy with the keyboard which I don't miss.
All in all, its a great PDA/Phone
Now next challenge, setting up Push Email.
R.
I am newbie in this forum, in general i am pretty satisfied with my HTCP3600i! However, i sometimes find it a bit lagging...just you know it's Samsung CPU not Intel.....i once had a thought of go for Atom Life in place, but ended i chose HTC, the reason is i've heard a lot negative comments about Atom's product batter life in a word Short!!
Has some flaws : No wm6, no minisdHC, no standard audio jack. wm6 and minisdhc I hope they'll correct
Hello
First i would like to mention that i went thru wiki and the forum and i could not find a thread with similar problems.
The problem is in the built in camera (or in the user)
As soon as i turn on the camera to take a picture it doesnt work. On the display the icons are showing like the camera is ready but it is just dark display.
So i pressed the button to capture an image just to see how will the camera react. As i pressed the middle cursor button after some 20-30 second on the display appeared following lines:
Unable to save captured image
unable to get data from camera device.
36003:500:2
I must say that i have problems with the camera module from the very beginning. I was hoping that the latest flash with Tomals SW will improove the camera drivers but this was not the case. Maybe i have to install some additional drivers? I just cant get the bloody camera to work.
Anyone has some idea why my camera does not work?
Besize that my qtek is working just fine.
Thanks 4 the answers.
Best regards from Slowenia.
Peter
Welcome to forums
I had a similar prob and solved changing the ROM
Good luck,
Hello orb3000
Thanks 4 the welcome
i upgraded my rom just 2 days ago with: TML871_WM61_21028_REGULAR_128MB.exe
but it does not change the status of the camera.
so i feel a little helpless
Peter V8 said:
Hello orb3000
Thanks 4 the welcome
i upgraded my rom just 2 days ago with: TML871_WM61_21028_REGULAR_128MB.exe
but it does not change the status of the camera.
so i feel a little helpless
Click to expand...
Click to collapse
Try another ROM, just in case. Generally a factory ROM would give a good indication of whether there is a problem and eliminate other possibilities. So I would recommend flashing it just for your peace of mind.
As far as Tomal's ROM is concerned, provided your device is 128Mb and ROM functions as it should otherwise, one of the reasons for non-working camera is the module itself or the mainboard. Hopefully its the camera module, as they are relatively cheap and very easy to replace and no special knowledge is required, as well as minimal device intrusion, so you will be able to replace it yourself. I think i saw the camera module at some of my suppliers, let me check if still available, alternatively, a working second hand part can also be used, I might have one in my toy box somewhere.
Thank you so much. I will yet again update the rom and than i will report how it went. So if it doesnt work, i would be happy to purchase a camera module from you. Replacing it will not be a problem as i have no problem with the mechanics and electronics in general :-D:-D:-D
I also stumbled upon a DIY side in this forum, regarding the universal.
So which rom would you recommend me?
Thanks
:-D:-D
Peter V8 said:
Thank you so much. I will yet again update the rom and than i will report how it went. So if it doesnt work, i would be happy to purchase a camera module from you. Replacing it will not be a problem as i have no problem with the mechanics and electronics in general :-D:-D:-D
I also stumbled upon a DIY side in this forum, regarding the universal.
So which rom would you recommend me?
Thanks
:-D:-D
Click to expand...
Click to collapse
Factory ROM is the ROM your device came with originally, out of the box.
Peter V8 said:
So which rom would you recommend me?
Click to expand...
Click to collapse
WM 5... as Uni came in with WM 5.... so in my case JASJAR.. and T-Mobile rom... is factory default for my 2 uni....
That could be a problem.
i have been given the qtek 9000 by my boss as he bought himself a tuch diamond pro and he gave me the qtek becouse he knew that i was so enthused about it. :-D:-D
Sadly the PDa came without any CD so factory rom is out of question. He somehow lost the CD so all i had was the phone, the usb cable and the charging unit.
try the wiki first!
http://wiki.xda-developers.com/index.php?pagename=Universal_Upgrades
Otherwise, someone may have it. (I've got SPV M5000 if you're interested)
The wiki has only the country or operator specific downloads. Since i`m from Slovenia there is no operator or SW for our operator on the list.
So i probably need an english version since the qtek in our country c<me only in english version.
Just get WWE for QTEK, or try other WWE ROMs. BUT make sure you have the Slovenian settings on a .CAB or check if they can be sent by your provider.
Peter V8, don't forget to update the wiki if you find what you were looking for... and it wasn't in the wiki. 30 people will (not) thank you, but appreciate it.
As soon as i find the problem i will update it to wiki no problem. If the camera is broken and it need to be replaced i will document the procedure with photos that i will take during the "operation".
Sadly my battery bloated a little bit (no chemical spill so far ) and i took it out of my qtek to protect it from damage. So now i am stuck with nokia N90 until the new Battery arrives that i ordered. So when i will have the new accu i will find the error that the camera is having and report it to wiki and forum.
Peter V8 said:
As soon as i find the problem i will update it to wiki no problem. If the camera is broken and it need to be replaced i will document the procedure with photos that i will take during the "operation".
Sadly my battery bloated a little bit (no chemical spill so far ) and i took it out of my qtek to protect it from damage. So now i am stuck with nokia N90 until the new Battery arrives that i ordered. So when i will have the new accu i will find the error that the camera is having and report it to wiki and forum.
Click to expand...
Click to collapse
A battery 'bloated a little bit' means it got wet, which might mean liquid damage to your device and the reason your camera might not work. Even if you replace the battery at this stage, if the main PCB got wet, it will corrode and your device will die, slowly, but surely.
I am fully aware of this problem, but the new battery bloated (i replaced it 3 months ago) and the camera doesnt work since i have the qtek (1,5 year). The little white paper stripe under the sim card holder didnt turn pink and also the battery isnt wett also the phone is not wett. Well we will see when i get the new battery. It is under warranty so if the battery damaged my beloved phone, the company that sold me the new battery 3 months ago will not get so easy of it. Here in Slovenia a well preserved qtek 9000 still costs arround 250-300 Euros.
A little update:
I bought myself a newer working qtek 9000 with partialy broken LCD for 30 Euros. So i placed the battery into my qtek and it works perfectly. Apart from that i am still waiting for my brand new battery to arrive from germany. So i fully charged the spare battery, did a DOC reset and flashed the qtek with Tomals ROM.
The camera however still doesnt work, so it is not a SW problem. Since i have bought the broken qtek 9000 for spare parts, i will take the camera out and replace it. So probably this weekend i will do the "service" and i will take pictures of the procedure and update the forum.
Peter V8 I also face a similar problem since my 2 days Ebay bought 02 Xda Exec's camera is full of white, red, green dots either in photo or video mode. Changing roms didn't help at all and its truly a pity since the phone seems like it came straight from the factory, although used. My dilemma is either paying about 20 Euros to ship it back or waiting for your endeavor to complete but since I overall truly like the phone I will wait and see
Peter V8 said:
A little update:
I bought myself a newer working qtek 9000 with partialy broken LCD for 30 Euros. So i placed the battery into my qtek and it works perfectly. Apart from that i am still waiting for my brand new battery to arrive from germany. So i fully charged the spare battery, did a DOC reset and flashed the qtek with Tomals ROM.
The camera however still doesnt work, so it is not a SW problem. Since i have bought the broken qtek 9000 for spare parts, i will take the camera out and replace it. So probably this weekend i will do the "service" and i will take pictures of the procedure and update the forum.
Click to expand...
Click to collapse
There is really no procedure worthy of taking pictures, once you remove the back, remove the large white antenna part and you will see where camera clips in. It's a fairly straightforward flex clip connection.
Little update again.
As i mentioned earlyer, i have bought myself another spare parts uni with broken tft. Ok so first.....i took apart both unis (didnt took no pictures becouse the pdf DIY to disassemble and assemble the UNi is more than helpfull, so you have to be a complete non technical type of human, or you have cerebrall palsy, or you must be a dee tii deee to not understand or grasp how it is made) and puted the tft from my uni in to the spare part uni. It worked perfectly and it had WM 5,0 the original. So the camera worked , everything worked-sim card....everything. So yesterday i flashed the uni with Tomals last ROM (Tommal the rom is working perfectly on my other uni so the SW is just fine) And somehow the uni had problems to work when my SIM card was inserted. So i removed the sim card and the uni worked perfectly. I dont know wath the problem is (probably a sim lock or somethin, but odd enough it worked with WM 5,0) so as the forum was down yesterday, i just dissasembled both unis again, putted the tft back in to my uni and putted the camera which worked just fine in the spare parts uni, in to my uni. And guess what.............the camera is still not working. I have done the hardreset but still.........even as i replaced the camera i still have the mesage......unable to get data from camera bla bla bla.....error 36003:500:2
So there might be a problem with some drivers or something in that way. I am pretty on the end with my knowledge now. How can i find the erorr or the couse of it???
If someone knows i would be very happy uni user :-D
So the problem is still not solved. Otherwise the uni is working perfectly only the camera gives me hard time.
Best regards
Peter
Peter V8 said:
If someone knows i would be very happy uni user :-D
So the problem is still not solved. Otherwise the uni is working perfectly only the camera gives me hard time.
Click to expand...
Click to collapse
seems like the problem is with motherboard rather than the camera...