I did a restore after a Rom update and none of the hardware buttons work.
Screen operates fully, but I cannot even shut the phone down using the hardware button.
Any help?
Backup Prog : Sprite Latest V.5
OK, so no one knows
Can you tell me the registry address for all of the hardware buttons?
Did a Rom update to bring it back :x
Related
Hi people,
I have a mayor problem. I just fu*ked up my phone by installing WM6.
Now the screen freezes when the QTEK "Keep the world in one" logo is visible with the OS Version information. Hard reset wont work.
How can I restore the original rom ?
Please help me!
s200 off
and I have this problem. my phone is off by installing new spl
Now the screen freezes when the QTEK "Keep the world in one" logo is visible with the OS Version information. Hard reset wont work.
How can I restore the original rom ?
Please help me
To go in the boot loader screen you have to:
press & hold camera and commmanager button
press the softreset hole
release the commmanager button and keep hold the camera button until the 3 colours display appear
Byez
but wat can i do after i hav the 3 colour screen come out?
pls help..... i'm very nervous..... i don wanna waste my money coz i screw up my phone.,...
i'm now outstation... can go back to the service center within this 6 mth....
Connect USB Cable. Go in the Boot Loader screen (Hold down camera button, power button and soft reset until the 3 colours display appear). Run Rom upgrade Software.
mrsurya2000 said:
Connect USB Cable. Go in the Boot Loader screen (Hold down camera button, power button and soft reset until the 3 colours display appear). Run Rom upgrade Software.
Click to expand...
Click to collapse
Which rom upgrade software ?
de.schurk said:
Which rom upgrade software ?
Click to expand...
Click to collapse
http://www.romupdate.ru/ghjibdrblkz...rophet_220734_2207114_024721_QtekWWE_Ship.exe --> this software
don't worry, your device isn't bricked as long as you can run it in bootloader
check in WIKI if you have G3 or G4 Prophet
I'm the exact same situation.
And wiki didn't help so far...
Take it easy and flash the ROM as described. Use any WM5 ROM compatible with your device, but preferrably one with no vendor ID. In case you cannot update normally use the RUU-No-Vendor-ID application found in the FTP.
As said above the device is not dead, it can be recovered.
namco said:
Take it easy and flash the ROM as described. Use any WM5 ROM compatible with your device, but preferrably one with no vendor ID. In case you cannot update normally use the RUU-No-Vendor-ID application found in the FTP.
As said above the device is not dead, it can be recovered.
Click to expand...
Click to collapse
Bear with me on the dumb questions
It looks like I managed to re-install
Thank you for your help. I installed the rom dezzer advised (post 7 of this thread) and it worked fine. Does that mean tha NOW i can flash smart1 1.3's?
Yep. Turn off the phone, make it sync with activesync and run UPDATE_ROM.bat.
Then cross your fingers Kidding. It will surely work. Remember to hard-reset after the upgrade.
If anything goes wrong just reflash WM5 and hard-reset. Always hard-reset after ANY OS upgrade.
I seldom activate MrTrueVGA. But tonight I did that for reading one PDF.
It leads me to hard reset the device right after a soft reset.
But the nightmare is ---
after hard reset, I press ACTION key to restore factory default as suggested. It takes few seconds to finish the default restore. Then I was asked to press POWER KEY to boot.
the device doesn't boot at all. just go back to the previous screen: 'Press ACTION to restore factory default or press Camera Key to exit'
If I press Camera Key, it just simply refresh the screen.
Seems the AMEO has entered an endless loop...
I have to try resetting the device in different way...
Now I mange to get the a dark screen as well as the ACTION key with Green light on.
any idea what mode is it (green light)?
Seems the OS couldn't startup after restoring factory setting. I guess I have to put the origin ROM back to the device instead of the updated WM6.
Continues tomorrow...
I've used it on my Athena with WM6 without a problem. Maybe something else is going on.
Is that an official release of WM6 for your device? I have no problem with MvRTrueVGA what so ever....
Have you tried flashing your device again?
I got my Ameo into a very similar loop. I took the battery out for a few minutes, then when re-inserted, I was able to "see" the Ameo from Sync Centre and re-flash the ROM...
Monocube SafeMode2 saved my butt various time with truevga..
the WM6 is download from here (t mobile version). I am looking for a way to flash back origin version.
BTW, other softwares I run after starup: USB mousr driver, WM5storage.
Sounds like the OS got killed. reflash the device
Thanks Olipro, I am a bit regret that if I had run your hard-SPL, probably i wouldn't experienced this problem.
The symptom do like OS got kill for some reason. I am wondering anyone had tried to hard reset after flashing WM6 ROM?
more update will come...
update:
reflashing ROM image solves the problem.
but i still believe MrTrueVGA caused the problem. Somehow it causes the conflict and blow up the OS.
I use MvRTrueVGA on WM5 and WM6 on my Ameo without problems.
(only smaller graphical bugs)
even changing the resolution never took me more than one soft reset
forget to mention, i use another software "scree orientation" at the same time.
maybe these two chaps don't work well together.
I have Telus P4000, and recently a few buttons stopped working. The following buttons dont work Widnows key/Ok Button/Soft Left/Soft Right/Green Phone/Red Phone/ Mail Button/ Internet Button on the top. On the Right Side the Camera and COMM manger button do not work. On the left side the Ok button and Voice Command button do not work.
Whats weird is that i can go into the boot loader menu by holding Power + Camera + reset... And i can also do a hard reset by doing Power + soft left+soft right + reset... So The Camera + soft left + soft right must work ? So could this be a software problem? i have done a Hard reset, but they dont work still? Any Help would be appreciated thanks
check this first post in this thread. There is a cab file that fixes this.
http://forum.ppcgeeks.com/showthread.php?t=31852&highlight=Titan+Kitchen
I have the same problem with my Mogul, but I have yet to find a solution that works, and that cab didn't do anything unfortunately (Unless I did something wrong, you just have to install it right?). My buttons also work for hard reseting the device.
Unfortunately that PPCGeeks page only changes the registry settings for the same buttons as the settings|buttons program. It doesn't change the phone buttons or the windows or ok buttons.
Did you flash a new ROM or is this a stock phone?
I bought my mogul used off craigslist, and the buttons worked for a few days after I bought it, then they stopped working. Since then I have installed the new offical sprint rom and thats it.
jclardy said:
I bought my mogul used off craigslist, and the buttons worked for a few days after I bought it, then they stopped working. Since then I have installed the new offical sprint rom and thats it.
Click to expand...
Click to collapse
So they stopped working before the Sprint ROM update? That doesn't sound good. Since you don't have a warranty you could follow the path of flashing to DCD ROM since you have probably the latest Radio ROM already and see if the button come back.
The original poster described exactly what is happening to me. I haven't tried the solution linked above because I'm at work. Has anyone tried that and had it work?
Hi all,
I using SpbBackup all day for save automatically my cruise. After the save SpbBackup reboot the device.
I configured the hold press end button for désactivated the data connection.
After the save end reboot of SpbBackup the hold press is désactivated. I'm obliged to reconfigure the button. Other button work well.
Can you help me?
Thanks.
Anyone with the same issue?
The problem appears in a random way.
Well ... since 2 weeks ago, i have this problem. Any solution???
Thanks in advance!
pikarin said:
Well ... since 2 weeks ago, i have this problem. Any solution???
Thanks in advance!
Click to expand...
Click to collapse
Hi,
I desactivated the reboot after the backup, but i have the same issue.
The problem is random.
It's necessary that I test with another backup software to see.
You use a backup software?
I find the origin of my problem: the newest version of Slide2Unlock (S2U). Have you got installed it?
I installed this version because anytime I press the GPS Hardware button and it finish quickly my battery. This version desactive the hardware buttons when it locks the device, but ... I supossed that when I unlock the device, the hardware buttons are another time available.
Well, I uninstalled the newest version and I reinstall version 2.04 and... voilá!!!!
Perfect!
I hope that you find here you solution!
Hi,
For the last month I noticed that Left softkey (Phone softkey) is freezing.. Now this is becoming more often. The only solution I found is when it freezes to press windows start button at the top left corner and then the phone is working normaly again. At the moment I press left softkey and it freezes, I see that background for that button drops in (the animation works). Then, to un-freeze it, I press verry gently with stylus windows start button.. The rom upgrade didnt work, so I dont know if this is hardware or software bug ???
Any idea ??
dgdragon said:
Hi,
For the last month I noticed that Left softkey (Phone softkey) is freezing.. Now this is becoming more often. The only solution I found is when it freezes to press windows start button at the top left corner and then the phone is working normaly again. At the moment I press left softkey and it freezes, I see that background for that button drops in (the animation works). Then, to un-freeze it, I press verry gently with stylus windows start button.. The rom upgrade didnt work, so I dont know if this is hardware or software bug ???
Any idea ??
Click to expand...
Click to collapse
It sounds like a firmware issue, especially since you had attempted to upgrade the ROM version and failed to do so. Have you tried performing a hard reset? This will restore the phone back to default factory settings and should resolve this problem.
I would strongly advise you to first backup your data (Contacts, Emails, SMS, etc) using PIMBackup.
To perform a hard reset, please try the following:
(1) With the device turned off, press and hold the VOLUME UP and VOLUME DOWN buttons, then briefly press the POWER button.
(2) Continue pressing the VOLUME UP and VOLUME DOWN buttons until you see this message on the screen:
Warning! Your device will be set back to factory default settings. Please ensure any additional installed programs and/or user data have been backed up before a hard reset is performed.
(3) Release the VOLUME UP and VOLUME DOWN buttons, press the VOLUME UP button to perform the hard reset.
Regards.
p.s. if you would like some detailed information on how to unlock your phone to upgrade to another ROM version, such as a custom ROM, then please carefully read the following guide.
Mastoid said:
It sounds like a firmware issue, especially since you had attempted to upgrade the ROM version and failed to do so.
Click to expand...
Click to collapse
Hi again,
Thanks for your replay. I succeded with ROM upgrade. The problem appeared while I was using previous ROM version (some clean WWE) and then I flashed to custom ROM few days ago thinking that I had a lot of programes instaled on previos ROM and if I install a clean ROM problem will dissapear.. Now I see I was wrong.. I dont realy get it.
I was following the guide from your post while I was upgrading the ROM I have now. And when I did, I did hard reset..
Good thing is that I found the temporary solution how to unbug it (by pressing start button) otherwise I would be verry pissed of as I dont have warranty
Did enyone experienced same problem ?
dgdragon said:
Hi again,
Thanks for your replay. I succeded with ROM upgrade. The problem appeared while I was using previous ROM version (some clean WWE) and then I flashed to custom ROM few days ago thinking that I had a lot of programes instaled on previos ROM and if I install a clean ROM problem will dissapear.. Now I see I was wrong.. I dont realy get it.
I was following the guide from your post while I was upgrading the ROM I have now. And when I did, I did hard reset..
Good thing is that I found the temporary solution how to unbug it (by pressing start button) otherwise I would be verry pissed of as I dont have warranty
Did enyone experienced same problem ?
Click to expand...
Click to collapse
Personally, I haven't ever experienced this problem, but it's good to know all is well now
Best Regards.
The issue is happening to me too.. not sure why..