Hi all,
I've been following the Widcom port across to the XDA-II, not because I want to attach a GPS, but because of the much expanded feature set.
I installed the BluetoothGPS.zip file, then activated all the new services offered by the phone.
I have a Belkin F8T001 USB Adapter in my broadband PC. I want to use BT to surf the net from the XDA without paying O2. Trouble is, my Belkin doesn't provide an Activesync Profile, so it can't be done. Until now, that is.
Belkin USB adapters offer a 'Network Access' service. The Widcom stack now allows the XDA to wireless network with my PC, map drives with Resco Explorer, surf the net without the bother of Activesync, oh, and Activesync over BT Wireless LAN if you like. The PC acts very much like a WiFi access point.
Another excellent bonus is the ability to browse the PDA with the BT 'File Transfer' Service. This is easier than browsing through Activesync, as you can open picture files directly without having to transfer them to the PC first.
Nice one guys, well done!
Steve Head
And where can I download these drivers ?
Sounds like a solution. Where???? :lol:
Here:
ftp://dgmatic.com/XDA2/BluetoothGPS/
Login: xda
Pass: xda
is there a current url for an up to date version of the widcomm stack which can be directly installed?
PAN vs LAP Bluetooth Profile on XDA / iMate
G'day All,
Thanks for the post on Net access - It's not as easy as it looks (having spent AGES getting iPAQs working with Bluetooth Dongles (BTW: You DO need 1.3.2.7 of the Widcomm Stack on XP to make PAN connections work!!!
My question is:
Has anyone managed to work out how to get PAN or LAP Network Bluetooth access going on an XDA II??
I can easily get a PAN network access connection going on an iPAQ 5550 (with the identical Widcomm stack version) - On the XDA II with the Widcomm stack installed, it defaults to a LAP profile... (Using BT Null Modem). I can't get this method working with internet access.
If I connect XP to the iMate, then the PAN driver is used on the PDA - BUT I can't get any traffic through (this is the same on the iPaq and the iMate).
Anyone got any clues / hints for me, please?!?! (ROM versions etc are latest).
Cheers.
Andrew
Re: PAN vs LAP Bluetooth Profile on XDA / iMate
acurtis007 said:
G'day All,
If I connect XP to the iMate, then the PAN driver is used on the PDA - BUT I can't get any traffic through (this is the same on the iPaq and the iMate).
Anyone got any clues / hints for me, please?!?! (ROM versions etc are latest).
Cheers.
Andrew
Click to expand...
Click to collapse
Hi,
I'd same the problem, but since I enabled service Personal Network Sever, then at PC side connect to Xda II, it's working, I can ping from / to Xda II.
(enable service by start > setting > bluetooth > from File Transfer to Personal Network Server, I checked them all)
But it's problem to connect via Xda II to PC, then I restarted PC and PPC and make new shortcut of PC Network Access.
Now it's working I can use Resco file explorer to map driver of PC share folder and get access to file. But it's seem unstable because it's hang sometime.
ps: Thank so much to the great person who made bluetoothgps.zip.
cairo31male said:
Here:
ftp://dgmatic.com/XDA2/BluetoothGPS/
Login: xda
Pass: xda
Click to expand...
Click to collapse
I could not login. Thanks anyway.
bluetooth zip file not available anymore
I tried the url, but is is not responding anymore with ftp and the username and password. Has anyone it for me??
I'd very much like to get hold of this file as well, same problem - user/pass doesn't work anymore.
Probably don't need another "me too" but I have been searching for this stack high and low! Please let us know where we can get it!
Immense thanks!
I have BluetoothGPS.zip (about 2Megs zipped) give me somewhere to upload it & i will.
That's a shame, it used to be on ftp://hydrosphere:[email protected]/ but it's gone now. I've obviously got it, but I'm damned if I'm hosting it as it's 'unlicenced software'.
Any suggestions?
As acurtis007 pointed out, it's not easy to do this even on the correct PDA. If you do get hold of the Widcom stack, you need to understand networking and a little voodoo to surf the net.
One advantage is that the BT Dongle in your PC becomes like an access point. You no longer have to set up an Activesync Partnership, so a PC can be logged in as anybody, and any PDA(s) can surf.
Here's the way to get Surfing over BT using proper IP NAT:
Your XP PC
Your installed BT Dongle should offer a Local Service called 'Network Access'. This should be started automatically, and creates a 'Bluetooth LAN Access Server' interface in your Network Connections. This is the important bit: Activate 'Internet Connection Sharing' on your LAN Card. Select the Bluetooth LAN Adapter as the Interface you want to share with. If you don't have a LAN card, then share whatever interface connects to the Internet.
If your LAN Card already has an ip address that starts with 192.168.0. then you're out of luck. You'll have to change the entire setup of your LAN to another Subnet. I chose 192.168.50.x, which is fine.
If you have correctly activated ICS, your BT LAN Interface will have the IP address 192.168.0.1, and your Internet device will have a hand under it's Icon.
You're XP PC is now ready to accept Bluetooth surfers - both of the Internet and your LAN.
The XDA-II
Bung in the Widcom Stack
Run the Lovely new Bluetooth Connection Wizard and Explore. You'll see a PC icon appear, tap it. You should be offered a range of services, depending on what make of BT Dongle you have. Select 'Network Access'. A Shortcut appears. Hold the stylus down on the Icon, and select Connect from the pop-up. You will have to do the PIN thing as you connect the 2 devices. The XDA's Bluetooth Null Modem then connects to the PC, and hello broadband.
The stack is very stable. I've been using it for 2 weeks now every day for both surfing and file transfers.
It's not perfect - beware
This is a hack, and therefore does not operate entirely correctly:
You will ALWAYS get an error message when first initialising the new stack. I'm used to it: Start Bluetooth - it fails; Start Bluetooth again - it runs. This happens every time, and I just live with it. Once it's up, I can surf till the battery dies.
You will need to reset your XDA-II's Connection Settings (Advanced - Select Networks) back to 'My ISP' where it says 'Programs that....Internet..'
Others on this forum have reported that the XDA's sound gets disabled when you uninstall the Widcom cab file. I haven't had cause to do this as I'm 100% keeping it. This is the advice I've seen posted:
"Uninstalling Widcom Stack
If you have the Widcom stack go to the WIDCOM BT-manager Audio gateway tab and Disable this before uninstalling. Sound should then remain actve."
So there you go - it works a treat.
Steve Head
If you want a bit of fun, try this:
Get yer Widcom network access up 'n' running
Put a TV Tuner Card into the PC with the BT Dongle attached, and hook up your Sky Box to the TV Card.
Download the free 'Microsoft Media Encoder'
Using Media Encoder, Run a Live Broadcast, and select 'Pocket PC Widescreen' as the target audience. Your Sky Box output (or whatever) is now being converted into a TCP/IP Stream at the sort of data rate your XDA can handle.
To watch Sky on your XDA all round the house, run Media Player on your XDA and enter the url http://192.168.0.1:80 (assuming you're connected via BT). You can also do this with a Webcam, and remotely monitor it full screen on your PDA.
Steve Head
sorry i forgot i could just attached it
Enjoy
It works
@ArcticCat
Thank you! (I nearly was loosing hope!)
1000 kisses, beers or whatever...
Pauline
Thanks I could kiss you all.
now for the winge.
As the XDA connects to the LAN over a BT null modem. It seems to be quite slow.
Is this due to the settings of the modem restricted to 11500 baud rate limit for the hardware?
Whilst i am at it. let me throw this in the works.
The XDAII connects via BT to a PC on the network. I can browse the network from the PC. But i can only browse the files on the PC that i am directly connected to via BT from the XDA as well as access the internet. Is this normal?
IP address is 192.168.0.1 on BT adapter. The LAN connection of the PC is 192.168.11.5 ( auto ip).
all other PCs on the network are in the 192.168.11.x range.
Any suggestions?
Cheers
Oorbz
As the XDA connects to the LAN over a BT null modem. It seems to be quite slow.
Is this due to the settings of the modem restricted to 11500 baud rate limit for the hardware?
Click to expand...
Click to collapse
I found out that the speed networking over BT is slower than expected. Any others having problems for repaly MP3s on their XDA. I think the max speed over BT is 1MBit. Whith all protocol things you schould get min 500kBit. But I have problems playing MP3s with mor than 192kBit, The XDE "feels" very slow. - any ideas?
But i can only browse the files on the PC that i am directly connected to via BT from the XDA as well as access the internet.
Click to expand...
Click to collapse
Oorbz: To conect to your home LAN you need to set up a Networking bridge (Because your network is devided in 2 segments). Using windows xp its included. Mark both network adapter and choose "Network bridge". After that you only configure the bridge and both networks are conected under one subnet mask. Sometimes BT-Adapters are not fully compatible with the network bridge. Then you need to do 2 little steps:
On the console type in:
Code:
netsh bridge show adapter
then type in
Code:
netsh bridge set adapter # forcecompatmode=enable
# stands for the Number of your BT Adapter.
Thats it. Now you have access to your complete LAN and NAT-Router. Using a fix IP on your XDA will speed up the start of the conection, but DHCP works fine too. All computers whould now have an IP from the same subnet liek 192.168.0.# / 255.255.255.0.
PS using a WLAN adapter some drivers need this settings too in order to work with the windows XP networking bridge.
On the console type in:
Code:
netsh bridge show adapter
then type in
Code:
netsh bridge set adapter # forcecompatmode=enable
# stands for the Number of your BT Adapter.
Thats it. Now you have access to your complete LAN and NAT-Router. Using a fix IP on your XDA will speed up the start of the conection, but DHCP works fine too. All computers whould now have an IP from the same subnet liek 192.168.0.# / 255.255.255.0.
PS using a WLAN adapter some drivers need this settings too in order to work with the windows XP networking bridge.
Click to expand...
Click to collapse
I tried the network bridge a few days ago with the card in compatiblity mode. but i will give it another go . I will repor back. Thanks
Hi
You mentioned the Belkin BT adaptor. That is about 30 odd pounds. Are all BT adaptors the same? i.e. do they just implement some version of the protocol? Seems the Belkin one implements v1.1.
How about this one, will it also do the job?
http://www.qtds.com/code/products.asp?recid=621&
Costs about 15 pounds, so much cheaper
btw, if your laptop already has BT built in, do you need to buy a dongle?
Hi folks, need some help here!
Got a bluetake x-bridge bluetooth access point and want to use it to connect my jam to my PC and surf the net, synchronise etc.
I've connected it to my router via a network cable, but the device itself doesn't come with any drivers.
The connection settings are on the page below
http://www.bluetake.com/Manuals/BT300/BT300_QSG_EN.pdf
In the section marked console configuration, it talks about having a PC with Bluetooth function embedded in it, then talks about using a dongle to get the required drivers I guess. Does this mean I need to buy a dongle too?
Sorry for going on, but I'm a bit confused!!!!
It looks like a sort of standalone device. The only thing I can suggest is looking through the manual for the default IP it uses. You may be able to set it up through a web interface. The dongle is required for connecting to it, but you won't need to, because your PPC already has bluetooth.
Having said that, I really can't see why you bought a bluetooth access point which runs at less than 1Mbps, when for £20, you could have got a WiFi SDIO card, and connected at 11Mbps
The reason i bought it are
a) It was about £3 on ebay
b) I don't want to sacrifice storage space by having to use an SD wifi card
Thanks for your help anyway, but the pdf you looked at is the only manual i got!!
I'll persevere
LANP
AFAIK the Jam does not support the LANP profile for BT networking. This is certainly the case for the Qtek S100. Anybody know different?
The scenario, which prolly many of you recognize yourselves in, -
Everyday i have to carry around a laptop, to work, to gf, to sweet home etc etc.
The laptop has builtin bluetooth and plenty of Gbs to store music and video.
So, what i'd like to do is be able to browse my files on the laptop and stream all these superplenty musicfiles.
Since i'm already carrying around this big heavy blob of laptopness i might aswell use the files stored inside...
The thing is.. i can't.
Tytn won't (can't?) discover the networking service on my laptop.
Tho my home-pc has no problem discovering it and using it, thus i've successfully created a bluetooth network between home-pc and laptop.
I'm sure it's none of the computers fault since both can discovers each's service and tytn discovers neither ones networking service.
I'm thinking it might be that tytn (wm?) doesn't support networking service over bluetooth albeit that's a little weird.
Is there any way to enable/disble/view provided bluetooth services (in the tytn)?
Are there any settings/hacks/3rd pary software which allows me to do this?
Same problem w/ my Sony VAIO Picturebook w/ built-in Bluetooth version 1.0.
So, I purchased a USB Bluetooth 1.2 dongle and Jasjam was detected as modem/serial port. Maybe Jasjam BT not backwards compatible w/ old version of BT?
Guys, please RTFWiki.
WindowsMobile 5 with AKU lower then 3.0 does not have support for BT Networking profile.
I'm sorry if i'm not the first who askes this:
- is there any way to connect to lan trough buetooth?
I've got the orange spv m600.
Is there a widcom driver for this?
Thanx a lot for your help
No, that's what WiFi is for.
Yeah, i know, but at home i've got a bluetooth acces point which i use to connect 2 laptops to lan. So i also wanted to do this with the prophet.
Now i have to use a computer with active sync to connect to the internet, but i cant acces lan that way.
Good Question
Wifi aside......it would be handy if we could use bluetooth to connect to the lan setup even if just to transfer files. Theres a program for palm that does a similar idea. But I guess really it IS down to having to use wifi for now.
Bluetooth security has always worried me anyway.
bluezard
I can transfer files with bluezard on wm5 using filetransfer profile
other options for lan and other profiles are also there but i have no way of testing them
This is a shot in the dark, but has anyone heard of anyone who got the mogul to work as an access point? Basically, use the evdo radio to connect to the internet, and use the wireless connection, either as an adhoc connection, or preferably as a full on access point with wpa2 to share to a laptop, other devices, etc. To better describe this, you can kind of do it with a laptop:
1. connect phone via ics or dun to laptop.
2. in windows, enable ics and create ah-hoc network with encryption.
3. Other laptop connects to windows laptop, gets wireless connection and is effectively using the phone as an access point.
Even better
1. Connect phone via dun to linux laptop.
2. Linux laptop (using madwifi driver or other open source) broadcasts access point settiings and works as a full on access point.
Scenario:
I want to be able to connect my mogul to my n800. I can do that now with DUN, but what if I want to use my bluetooth headphones, or the bluetooth keyboard that I haven't bought yet? Bluetooth only allows one connection at a time, so I'm SOL. If I could get my stupid mogul to work as an access point, then I could share my connection with any wireless device (how sick would that be) and reserve bluetooth for what I wanted to really do with it, not just browsing the net. Don't get me wrong, I love that I can even sync via bluetooth, but am just looking to expand the possibilties. Unfortunately, since this is WM6, I have no idea how to really work the SDK to see if network bridging is possible. If this were a Linux phone I'd probably be done already. =(
search for socks proxy.
it doesn't work that well, but it does work..
-mark
jtlonthewestside said:
Scenario:
I want to be able to connect my mogul to my n800. I can do that now with DUN, but what if I want to use my bluetooth headphones, or the bluetooth keyboard that I haven't bought yet? Bluetooth only allows one connection at a time, so I'm SOL. If I could get my stupid mogul to work as an access point, then I could share my connection with any wireless device (how sick would that be) and reserve bluetooth for what I wanted to really do with it, not just browsing the net. Don't get me wrong, I love that I can even sync via bluetooth, but am just looking to expand the possibilties. Unfortunately, since this is WM6, I have no idea how to really work the SDK to see if network bridging is possible. If this were a Linux phone I'd probably be done already. =(
Click to expand...
Click to collapse
Ummm... I'm not sure what you are basing your Bluetooth information on, but the BT specification allows for up to 8 concurrent connections at once- one master devices and 7 slaves. Why do you think its only one at a time?
I use multiple connections all the time- Very often I have my phone connected to my bluetooth GPS receiver in the car, and at the same time I'm playing tunes from the same phone over my A2DP compatible car stereo... or, take a phone call on my BT headset, and all the while I'm still connected to the GPS who is still tracking my location using bluetooth. I can tell the person where I am in real-time.
I've also had someone send me a file while talking on the phone via BT headset.
You don't need such a complicated solution for your imagined problem! I don't see any reason you can't tether it and still connect to up to 7 more Bluetooth devices at the same time!
Still, using it as an access point might prove useful for other sorts of scenarios (teleconnected mobile Lan parties? WiFi on a Bus? The incredible moving hotspot?), but you don't need it... at least not for your described scenario!
Basides, you'll get better battery life out of your connected devices if just using BT instead of WiFi!