The scenario, which prolly many of you recognize yourselves in, -
Everyday i have to carry around a laptop, to work, to gf, to sweet home etc etc.
The laptop has builtin bluetooth and plenty of Gbs to store music and video.
So, what i'd like to do is be able to browse my files on the laptop and stream all these superplenty musicfiles.
Since i'm already carrying around this big heavy blob of laptopness i might aswell use the files stored inside...
The thing is.. i can't.
Tytn won't (can't?) discover the networking service on my laptop.
Tho my home-pc has no problem discovering it and using it, thus i've successfully created a bluetooth network between home-pc and laptop.
I'm sure it's none of the computers fault since both can discovers each's service and tytn discovers neither ones networking service.
I'm thinking it might be that tytn (wm?) doesn't support networking service over bluetooth albeit that's a little weird.
Is there any way to enable/disble/view provided bluetooth services (in the tytn)?
Are there any settings/hacks/3rd pary software which allows me to do this?
Same problem w/ my Sony VAIO Picturebook w/ built-in Bluetooth version 1.0.
So, I purchased a USB Bluetooth 1.2 dongle and Jasjam was detected as modem/serial port. Maybe Jasjam BT not backwards compatible w/ old version of BT?
Guys, please RTFWiki.
WindowsMobile 5 with AKU lower then 3.0 does not have support for BT Networking profile.
Related
Hi folks, need some help here!
Got a bluetake x-bridge bluetooth access point and want to use it to connect my jam to my PC and surf the net, synchronise etc.
I've connected it to my router via a network cable, but the device itself doesn't come with any drivers.
The connection settings are on the page below
http://www.bluetake.com/Manuals/BT300/BT300_QSG_EN.pdf
In the section marked console configuration, it talks about having a PC with Bluetooth function embedded in it, then talks about using a dongle to get the required drivers I guess. Does this mean I need to buy a dongle too?
Sorry for going on, but I'm a bit confused!!!!
It looks like a sort of standalone device. The only thing I can suggest is looking through the manual for the default IP it uses. You may be able to set it up through a web interface. The dongle is required for connecting to it, but you won't need to, because your PPC already has bluetooth.
Having said that, I really can't see why you bought a bluetooth access point which runs at less than 1Mbps, when for £20, you could have got a WiFi SDIO card, and connected at 11Mbps
The reason i bought it are
a) It was about £3 on ebay
b) I don't want to sacrifice storage space by having to use an SD wifi card
Thanks for your help anyway, but the pdf you looked at is the only manual i got!!
I'll persevere
LANP
AFAIK the Jam does not support the LANP profile for BT networking. This is certainly the case for the Qtek S100. Anybody know different?
hello
i want to ask if it excist a program which connects bluetooth to wlan. because i know that for nokia serie 60 they where so a program.
if you know sometihning please answer.
and i am sorry for my bad english
Bluetooth and Wireless lan are 2 completely different things. They operate of different frequencies and at different speeds.
Physically, there is no way to do this, and on the Nokias they may have a wireless lan card in it?
no on nokia there is a program which let bluetooth connect to wlan. its works also on old models like 3650.
so i want to know if the same method will works with magican or if they are a program which makes that
These is part of the specs for the 3650 from Nokia's website:
Wireless Connectivity
* Infrared
* Bluetooth
* Connect phone wirelessly to a compatible phone or a compatible PC
* Send/receive pictures, video clips, and graphics
* Play games
If your are refering to the 3rd option, the phone can connect wirelessly to a compatible PC via BT or IR and not via WLAN using Nokia's PC Suite software. One can then surf the web, check emails, etc using the phone as long as the PC is connected to either via LAN or WLAN. This is also possible with a Magician.
As "eliosfa" said, these are totally 2 different technologies. It's like remote controls, there is the IR (mostly found in entertainment equipment) and RF (commonly used in garage doors).
no you dont understand me
this program excists. my friend try it on his nokia 3650 and it works very good so i have thought that it also will give a programm for magican
do you no something ??
let me know
what i understand from your statement that your friend has a 3650, via the phones bluetooth he connects to his pc via a wlan? my friend, that's totally impossible.
in any case, assuming what you say is true, can you tell us the name of the software/program your friend is using in his 3650? what are steps/procedures/settings used?
that is exactly what i would like to know, given that fact that they are 2 completely different technologies...
Actually, both bluetooth and wifi operate at the same 2.4GHz frequence. But they are completely different protocol, and there is no way for them talk to each other.
Someone explain quite well here:
http://www.bluejackq.com/phpbb2/viewtopic.php?t=3258
about the wireless internet
mayb what he's talking about is that his friend connects to the computer via bluetooth n the computer is further connected via wlan which enables his friend to connect to the internet overe bluetooth.....it probabaly creates a serial connection over bluetooth
I think you mean the PAN profile. Just search in this Forum. Look for "PAN" or "Bluesoleil"
I think you mean the PAN profile. Just search in this Forum. Look for "PAN" or "Bluesoleil"
I'm trying to use my WM6 Black 8525 as either Bluetooth or USB modem. Cannot connect to my Thinkpad T60 laptop built-in Bluetooth as it only has Active Sync Bluetooth Service nor my Vista finds any devices that support PAN.
Any ideas would be helpful. Thank you in advance!
in vista do not try to get the modem over bluetooth working as pan. Do it as a dial up connection from the settings in internet explorer. On my hp I just partnered the bluetooth then went to add connection in ie. i found it with no trouble. I think it must be very dependant on the bluetooth stack on your pc. On my hp there is a process running called BTStackServer.exe that is doing it. On my dell this is not the case and it just will not work. In that case I use the wireless modem program built into the phone with a usb cable. following the instructions in help gets it to work fine.
I have also used the usb method on two xp desktops so it works just about everywhere.
With the pan, i think the problem with windows mobile devices is that they are acting in the same direction as a pc would. They are looking for a device, not acting as one. I bought a bluetooth dongle for one of my xp machines and installed the bluesolie software (stack?) and both ends showed the other as a pan device but both ends just waited for the other to expose their functionality until they timed out. i tried it with a hermes and a trinity.
This is a shot in the dark, but has anyone heard of anyone who got the mogul to work as an access point? Basically, use the evdo radio to connect to the internet, and use the wireless connection, either as an adhoc connection, or preferably as a full on access point with wpa2 to share to a laptop, other devices, etc. To better describe this, you can kind of do it with a laptop:
1. connect phone via ics or dun to laptop.
2. in windows, enable ics and create ah-hoc network with encryption.
3. Other laptop connects to windows laptop, gets wireless connection and is effectively using the phone as an access point.
Even better
1. Connect phone via dun to linux laptop.
2. Linux laptop (using madwifi driver or other open source) broadcasts access point settiings and works as a full on access point.
Scenario:
I want to be able to connect my mogul to my n800. I can do that now with DUN, but what if I want to use my bluetooth headphones, or the bluetooth keyboard that I haven't bought yet? Bluetooth only allows one connection at a time, so I'm SOL. If I could get my stupid mogul to work as an access point, then I could share my connection with any wireless device (how sick would that be) and reserve bluetooth for what I wanted to really do with it, not just browsing the net. Don't get me wrong, I love that I can even sync via bluetooth, but am just looking to expand the possibilties. Unfortunately, since this is WM6, I have no idea how to really work the SDK to see if network bridging is possible. If this were a Linux phone I'd probably be done already. =(
search for socks proxy.
it doesn't work that well, but it does work..
-mark
jtlonthewestside said:
Scenario:
I want to be able to connect my mogul to my n800. I can do that now with DUN, but what if I want to use my bluetooth headphones, or the bluetooth keyboard that I haven't bought yet? Bluetooth only allows one connection at a time, so I'm SOL. If I could get my stupid mogul to work as an access point, then I could share my connection with any wireless device (how sick would that be) and reserve bluetooth for what I wanted to really do with it, not just browsing the net. Don't get me wrong, I love that I can even sync via bluetooth, but am just looking to expand the possibilties. Unfortunately, since this is WM6, I have no idea how to really work the SDK to see if network bridging is possible. If this were a Linux phone I'd probably be done already. =(
Click to expand...
Click to collapse
Ummm... I'm not sure what you are basing your Bluetooth information on, but the BT specification allows for up to 8 concurrent connections at once- one master devices and 7 slaves. Why do you think its only one at a time?
I use multiple connections all the time- Very often I have my phone connected to my bluetooth GPS receiver in the car, and at the same time I'm playing tunes from the same phone over my A2DP compatible car stereo... or, take a phone call on my BT headset, and all the while I'm still connected to the GPS who is still tracking my location using bluetooth. I can tell the person where I am in real-time.
I've also had someone send me a file while talking on the phone via BT headset.
You don't need such a complicated solution for your imagined problem! I don't see any reason you can't tether it and still connect to up to 7 more Bluetooth devices at the same time!
Still, using it as an access point might prove useful for other sorts of scenarios (teleconnected mobile Lan parties? WiFi on a Bus? The incredible moving hotspot?), but you don't need it... at least not for your described scenario!
Basides, you'll get better battery life out of your connected devices if just using BT instead of WiFi!
I have a Vogue flashed with dcd 3.1.1 and I cannot pair a second bluetooth activesync. Basically it says the computer doesn't offer it as a service.
Since we had an extra device (8125 Stock) around we paired it up to the same laptop and found that it discovered the activesync service offered by the laptop. Although we found it discovered it as a "Pocket PC or Other PDA" where the XV6900 found it as a "phone or modem"
Between the two of us we have about 16 man hours into this ridiculous problem.
Is there any answer to how to get the Activesync service to be seen on the phone?
Funny thing is, this phone is already connected Via B/T on another laptop.
Which stack are you on? For me the Widcomm and toshiba bluetooth stack gave me the same problems as your having. I switched to the MS stack and now im connecting flawlessly for about a couple months now
MS Stack. But we've isolated it to the telephone.
hmm... weird...do you know if your usb driver is compatible with that stack? that might be an issue but I don't know because im not an expert :/
I don't think your phone can be paired to more than one computer at a time, so try unpairing from the other computer and and your phone delete the pair to your computer and delete your phone's pair on the computer, then try pairing from your handset first.
Lol, dunno if that makes a whole lot of sense x__x but doesn't hurt to try!