Related
Any tips? I'm sure I have everything set up perfectly, but it just won't download any web pages. Is there something i'm missing?
I can download my e-mails fine (Hotmail, and IMAP) but can't get any web pages open using eather IE or Opera.
Cheers
Try disabling proxy on your GPRS/EDGE connection first (take note of the settigns first). I haven't been able to do anything using Activesync Passthru.
It was allready disabled.
I've just done a hard reset, and it still won't connect with a fresh Activesync connection. Any ideas?
ACTIVE SYNC AND INTERNET
Under options in ACTIVE SYNC---you have to have THIS COMPUTER CONNECTS TO INTERNET .
Thanks, but it's allready ticked.
Anything else?
hi!
Use tweaks2k2.net or any other program that enables the browser pass as IE 6.0.. just try
ACTIVE SYNC AND INTERNET
I've also had problems if my OUTLOOK inbox is set to my POP MAIL ACCOUNT (YAHOO). When I check outlook mail for some reason it connects.
Also--what are your connection settings to get to INTERNET for your GPRS and WORK settings unrelated to active sync?
Re: hi!
guitarman_08 said:
Use tweaks2k2.net or any other program that enables the browser pass as IE 6.0.. just try
Click to expand...
Click to collapse
I don't get what you mean. What will this do?
Cheers!
hi
Well, matheprat im just guessing if this is right... but i have encounter this problem wherein i can't load any web page on my ppc..theres an option on tweaks2k2 where you can chage PPC IE as IE 6.0 Well It will not totally chage but it will make your browser pass like an IE 6.0.. just try and let me know if you've done it
Thanks for the reply. I tried doing the above, and there's no change, I still can't connect. Every time I connect the PPC to Activesync I get a message saying that it's unable to find a server assigned IP. Ive tried using a specific IP (my computers), and leaving it to obtain one from the server, but neither work. When it was connecting before, i set it to obtain an IP from the server.
I also can't update the weather info for SPB Pocket Weather, but I can check e-mails (hotmail and IMAP), and sign into MSN on the device.
k!!
k!!
Hi all, im kind of new to this but i just read about push email with exchange server and i was wondering how i could use it with my mda vario. I've already installed an updated rom with push email but i dont know how to use it. can any one fill me in on this? thanks for any help.
You need a Exchange 2003 server with at least SP2 installed. Also a UMTS/GPRS connection because is not working over WIFI.
Bitfrotter 8)
Go to www.mail2web.com, sign up there. Than put the settings from the website in the Exchange Server settings in Active Sync on your PPC. Set your current email address to automatically forward your email to your mail2web email address. Enable GPRS and enable push email from the Comm Manager and bingo, push email is yours.
Ok, ive already signed up with mail2web but i want to automatically retrieve hotmail emails. i don't see an option on hotmail to forward all my emails to mail2web. am i missing something here? sorry, im inexperienced and all and these are probably lame questions and all. but please help me out. after reading that article i got hyped up in doing this. thanks for any replies.
Bitfrotter said:
You need a Exchange 2003 server with at least SP2 installed. Also a UMTS/GPRS connection because is not working over WIFI.
Bitfrotter 8)
Click to expand...
Click to collapse
I've gotten DirectPush to work over WiFi... Maybe that was an earlier ROM version though... I don't recall the circumstances under which I got it to work.
MS says that Direct Push does not work over WiFi. WiFi does not allow disconnected connections (in other words, a connection that allows for the data stream to be suspended). If WiFi did it, it would require a continuous connection that would drain the batteries at a very rapid pace.
Setting up Exchange for Direct Push is pretty easy. I set up ours in about 5 minutes.
One of the coolest things you can do with a correctly configured Exchange 2003 system is with the Mobile Admin pack (free download from MS). It allows you to tell the PDA that it needs to "self-destruct" in case the phone is stolen. A remote wipe will do a hard-reset on the phone, deleting all data not stored on an external SD.
I usually get my email on the MDA faster than Outlook on my desktop.
If any Exchange admins are out there, I can post how to set it up if anyone needs help.
exchange/activesync
Yes please!
Hotmail has deleted the possibility of forwarding mail automatically a few years ago in the free version, only Hotmail Plus subscribers can use this option. With gmail however it is still free. So a basic hotmail account will not be able to use Push over Exchange. You can however sign in to MSN Messenger on your device and will then be notified as soon as an email arrives on the hotmail server. This will cost you extra data charges though, since contacts coming online will also result in data transfer to your device.
Romp said:
MS says that Direct Push does not work over WiFi. WiFi does not allow disconnected connections (in other words, a connection that allows for the data stream to be suspended). If WiFi did it, it would require a continuous connection that would drain the batteries at a very rapid pace.
Setting up Exchange for Direct Push is pretty easy. I set up ours in about 5 minutes.
One of the coolest things you can do with a correctly configured Exchange 2003 system is with the Mobile Admin pack (free download from MS). It allows you to tell the PDA that it needs to "self-destruct" in case the phone is stolen. A remote wipe will do a hard-reset on the phone, deleting all data not stored on an external SD.
I usually get my email on the MDA faster than Outlook on my desktop.
If any Exchange admins are out there, I can post how to set it up if anyone needs help.
Click to expand...
Click to collapse
that would be awesome if you know of a tutorial anywhere on this..
so by creating an exchange server as romp said, you can sync any email including hotmail? well that's really a bummer that microsoft disabled forwarding on hotmail. Its mainly my primary email which all my friends/family know. so it would be a miracle if anyone knew how to sync hotmail without subscribing to their hotmail plus.
Well, getting outside emails are a bit more complex. This is usually for a business, but there are plenty of POP-to-Exchange plug ins that would allow getting Hotmail emails. Of course, you would need the Hotmail Plus for the POP.
http://www.slipstick.com/exs/popconnect.htm
My answer was more concerning the Exchange Direct push question, not the hotmail one.
Where I work (yes, I did set up the Exchange system) we have GFI spam filtering and virus filtering (www.gfi.com) and they have a POP2Exchange bridge included. It just checks the account, downloads any POP emails, and drops it in the right mailbox.
Exchange is a complete system, not just mail. It has webmail, Windows Mobile direct push, calendar, contacts, and more. Unless you are in a company with Exchange or Small Business Server, its not a cheap thing to do for a home network.
If you DO have Exchange at your office, run to the IT guy and hurt him until he sets your phone up on it. Its all the functionality of Blackberry and more, built into Exchange.
I'll write that tutorial, g0nk.
ok so if we go the mail2web route... i dont need to install exchange 2003 on a pc myself? does it only work on windows server 2003?
im interested in doing this at my job but i want to make sure it is not too difficult
edit.. well we have our own domain email addresses so the [email protected] is not an option..
any suggestions?
Romp said:
Exchange is a complete system, not just mail. It has webmail, Windows Mobile direct push, calendar, contacts, and more.
If you DO have Exchange at your office, run to the IT guy and hurt him until he sets your phone up on it. Its all the functionality of Blackberry and more, built into Exchange.
I'll write that tutorial, g0nk.
Click to expand...
Click to collapse
1) Agreed
2) I am the IT guy and it don't work on our server - the rootcertificate won't install to the PPC - an MS acknowledged problem............
3) Please forward ASAP !! Thanks !! :lol:
Is it a self published cert? Because you CAN get any externally issued cert to work just fine. We use a $15 GoDaddy cert with no problems.
The big screw up most people have with the cert (myself included) is that the cert is not correctly installed, even though it says it is.
Cheaper certs are called "Chained" certs. All certs need a path back to one of the big cert companies. So, companies like GoDaddy get approved to be second level cert issuers. IE on the PC will look at the cert and track it back to the main cert issuer. For example, the cert on GoDaddy goes from GoDaddy, to Starfield, to VeriCert. The VeriCert certificate is installed on all PCs.
Anyway, the problem is that the PC can follow an undefined cert path, the PPC can't. If you install the cert on the server, IE on the PC can figure out the whole path, PPC can't. So, the big thing is to make sure the MIDDLE CERTS are installed on the server. Even though everything seems fine, chances are that the middle ones are not (in this case STARFIELD)
The easiest way to find out if the cert is valid or not is try to get to your webmail on PIE. If you get a message about the cert, your server is not set up completely.
For my server, I had no luck until I found the Intermediary Cert and installed it. https://certificates.starfieldtech.com/Repository.go
Once that was done, my GoDaddy cert worked on the PPC and syncs went perfectly. Once the server has all the certs in the cert path installed, the PPC can validate each level. Until then, its clueless. Most people think you need to install the cert on the PPC. Its the server that needs it.
Does the self published cert only cause problems with direct push? I've got the "old" polling method working. I created a root CA on my server to sign the cert created for the web server and then turned that root CA into a CAB which was installed on the PPC. I should say that my phone doesn't have an AKU 2.xx rom on yet so I've not tested push mail.
This is all outlined in the following doc :
http://www.microsoft.com/technet/itsolutions/mobile/deploy/msfpdepguide.mspx
Also look at http://support.microsoft.com/kb/817379 if you are running a non sbs2003 exchange server in a configuration that doesn't have a front end/back end exchange server configuration. As there are some minor tweeks needed to the registry and to the default web server setup.
If you can do a remote Activesync, then DirectPush will work just fine.
A newbie Direct Push question:
I upgraded my 8125 ROM to the official Cingular June 19 version, and direct push SEEMS to be working great my my Hosted Exchange provider. When new email comes in to my Exchange server and/or a task / calendar / contact is changed on the desktop Outlook client, those get pushed quickly to the 8125.
Problem is, it doesn't seem to work in reverse. For example, IF I get an email pushed to me on my PDA, I read it and delete it on my PDA.....that deletion action is NOT getting syncronized back to my Exchange server. Is that by design, or is indeed something wrong?
Thanks in advance!
not sure if it helps, but you can change when pocket outlook deletes mail, there are 3 options:
on connect/disconnect
immediately
manually
I dunno if changing that will help you at all, but its in the pocket outlook options.
I'll shut up now, in case I misunderstood
jmel said:
not sure if it helps, but you can change when pocket outlook deletes mail, there are 3 options:
on connect/disconnect
immediately
manually
I dunno if changing that will help you at all, but its in the pocket outlook options.
I'll shut up now, in case I misunderstood
Click to expand...
Click to collapse
I appreciate your reply, but my question is beyond that......it centers around Driect Push.....my thinking is, regardless of that setting you referred to, once the email is deleted on the PDA, the PDA should "reverse-push" that deletion to the Exchange server, and mine does not seem to be doing that.
I hope that is a little clearer?
No, his answer was right. The reverse of the Push is not the same. You have to set the options as Jmel suggested. Its basically to save data.
This allows you to go through your mail, delete all your spam and crap, then update the server. Doing so immediately would be a waste. Recieving/sending emails is considered vital, deleting them...not so much.
Hi,
I have setup Direct Push on our Exchange servers and setup my Qtek 9100 to DirectPush from it.
I recieve the folder structure
It tells me how many emails need downloading
I can SEND emails
But it doesnt bring any emails down!!
Can anyone help??
Email
I seem to be having this EXACT same issue. I cannot figure out what is failing.
Hmmm.. I am not at all sure, but I have an idea. If you go to activesync on the phone, and then go to configure server (under the menu right softkey), and then hit next and next again, you should see the screen with the things you are syncing... contacts/calendar/email/taskes, ect... If you then click on email, the settings button sould un-grey. Click settings. Change "Include the previous" and "limit email size" to "all", and then hit the "ok" in the upper right corner, and then finish. Hit the left softkey for sync, and it should get all of your email from the server... I have no way of knowing if this is indeed your problem, but I thought it may be worth a try... I would be interested to know if it works!
I have seen someone with exactly the same problem which I couldn't solve.
Are you by any chance running Microsoft SmallBusinessServer 2003 and Microsoft ISA 2004 :?:
Eman
We are running ISA Server...
Does everyone have this problem with Qtek or is it universal? I was going to try update ROM because you cant change account settings once you put them in, they grey out! But the ROM on Qtek seems a lower number than that I have installed... and Im not entirely sure what a ROM update does.
I have selected ALL on everything, just the number of emails to download increases... say 500 it displays 0/500 then 125/500 then disappears, still no email or anything!!
Just tried updating ActiveSync to 4.2 on a HP 6915...
Same problem...!!
HELP
Issues
Ok, here is what I've learned (which isn't much) so far:
I'm using a T-Mobile MDA with the stock firmware. I am trying to connect to Exchange Server 2003. I've seen the server options grey out as well, but the trick I've used is to configure the server options in Active Sync on the pc you have it connected to. The Windows Mobile version of Active Sync doesn't seem to play as nice at times.
Starcruzier--
Thanks for the suggestion, but I have tried that as well. I actually went through the same steps with a T-Mobile SDA on trial as well. When I do the steps that you outlined on both devices, I actually pull down all the mail...but I get no new messages as they come (and I did configure the SMS to send "As they arrive".
I'm starting to think this is more of an issue with either Active Sync, Exchange, or how T-Mobile handles push email from Exchange.
I honestly dunno about qtec, I have a T-mobile MDA. I am running rom version 2.26.10.WWE (just upgraded...) and I am using the Microsoft Direct Push (no SMS required... ) What rom are you using, and are you using the direct push or the SMS method (as I believe they work differently...) You can get the rom I have from a link in this thread:
http://forum.xda-developers.com/viewtopic.php?t=57554
although it is customized for T-mobile....
Question
I have a T-Mobile MDA as well. Star...did you get push email working with the stock ROM on the device?
Nope, when I got it push email was not supported by the default rom, and so I upgraded. I recently got a new one because the old one broke, but I believe that I upgraded this one before I tried to setup the push, so I dunno if it is supported by the default rom, or how well this works... hope this helps...
Starcruiser1229 said:
Nope, when I got it push email was not supported by the default rom, and so I upgraded. I recently got a new one because the old one broke, but I believe that I upgraded this one before I tried to setup the push, so I dunno if it is supported by the default rom, or how well this works... hope this helps...
Click to expand...
Click to collapse
That's easy to find out - in ActiveSync on the device, set the schedule to "as items arrive". If you've got AKU2 on the device, it should NOT ask you for a unique device address.
You can also make sure by going into settings > system > about; my OS shows as "OS 5.1.195 (Build 14955.2.3.0). Afaik, that means I have AKU 2.3 on the device. You need at least AKU 2 for DirectPush to work. Oh, and Exchange 2003 SP2 on the server.
Did everyone else just setup DirectPush and recieve emails straight away, or is it just me with the problem?
Does ISA effect it??
ellisjacklin said:
Did everyone else just setup DirectPush and recieve emails straight away, or is it just me with the problem?
Does ISA effect it??
Click to expand...
Click to collapse
If you get the folder structure, ISA should not be the problem. And yes, DirectPush works right away; if you have AKU 2.x on the device and when connecting to the server it determines that the server supports DirectPush, it should work at once.
Of course, DirectPush can be disabled in the Exchange System Administrator console. That would explain the effects you are experiencing.
Do you mean the tickbox 'Enable DirectPush' in Exchange Manager?
This is enabled on the Front End and main Exchange servers..
ellisjacklin said:
Do you mean the tickbox 'Enable DirectPush' in Exchange Manager?
This is enabled on the Front End and main Exchange servers..
Click to expand...
Click to collapse
Yes, that's the one I meant. Did you increase the timeout on the ISA server to 1800 seconds (30 minutes)? Does it work with other Windows Mobile devices? Does your mobile operator maybe not support persistent connections?
I have just set this for Outgoing and Incoming to 1800.
Tried my PDA and it still does the same thing, shows me how many it needs to download (which is nice) and then decides not to download them.
Vodafone (provider) tell me as long as Internet APN is active, which it is, it should be fine.
ellisjacklin said:
I have just set this for Outgoing and Incoming to 1800.
Tried my PDA and it still does the same thing, shows me how many it needs to download (which is nice) and then decides not to download them.
Vodafone (provider) tell me as long as Internet APN is active, which it is, it should be fine.
Click to expand...
Click to collapse
Somewhere in ActiveSync, you can set the debug level to "verbose". Does it tell you any more when you set it that way? Also, on the backend Exchange Server (where your mailbox resides), check the entries in the IIS Log (%systemroot%\system32\Logfiles\w3svc1\exYYMMDD.log - assuming it runs in the default Web Site, else w3svc1 will be something else). Do you have IIS Lockdown installed on the server? What happens if you sync manually, does that work? In the settings of the user (Active Directory Users and Computers), are the Exchange features pertaining to Active Sync activated?
I have set this to Verbose, cant see any effects of it though..?
If I sync manually, it tells me what there is to download, doesnt download them, then goes again and does 0/1 on everything. And ends seemingly normal bringing nothing down.
I have lots of log entries relating to the GET and PROPFIND from ActiveSync in the log but I cant see anything displaying a problem.. everything seems to be communicating but just not bringing down the emails..
User Enabled Syncronisation is set against the user on AD.
ellisjacklin said:
I have set this to Verbose, cant see any effects of it though..?
If I sync manually, it tells me what there is to download, doesnt download them, then goes again and does 0/1 on everything. And ends seemingly normal bringing nothing down.
I have lots of log entries relating to the GET and PROPFIND from ActiveSync in the log but I cant see anything displaying a problem.. everything seems to be communicating but just not bringing down the emails..
User Enabled Syncronisation is set against the user on AD.
Click to expand...
Click to collapse
After enabling verbose and trying one sync, what does it show when you hit "view status" in ActiveSync? Also, is it possible that you have policies in Exchange 2003 in place and your device is not compliant (e.g. no/too short password)?
Ive tried Verbose and no error is displayed, everything ends normal on Sync.
It is strange that you can send emails from the device no problems, so I assume the device is compliant. I have tried a HP PDA and have the same problem.
I'm trying hard to like my x1, can anyone help?
Whenever I try to access OWA using either PIE or Opera I get a page cannot be displayed error. Anyone else seen this and got a solution? OWA works fine using my E90 S60 browser.
Thanks, Martyn.
Just tried it on Opera 9.5 build 15202 and it renders really nicely - pleasantly surprised!
Doesn't work in my Opera Mobile. Can't remember the build. It's the one with Manila favs from Itje's thread.
It works nice and is really fast (as always) in latest Opera Mini.
martynb said:
I'm trying hard to like my x1, can anyone help?
Whenever I try to access OWA using either PIE or Opera I get a page cannot be displayed error. Anyone else seen this and got a solution? OWA works fine using my E90 S60 browser.
Thanks, Martyn.
Click to expand...
Click to collapse
Try Opera Mini.
I'd not like to use Opera Mini for sensible sites
like OWA. It transmits logins over a proxy,i don't
think it's a good idea...
why don't you use Active Sync? You can sync it
manually and e.g. only for the last days. But for
the most it uses less traffic then visiting
the OWA site everyday...
Better yet, set up your push email. It keeps a HTTPS session alive. You just need to install the certificate on your PC to set up the sync, which you can get from OWA.
bedlam_au said:
Better yet, set up your push email. It keeps a HTTPS session alive. You just need to install the certificate on your PC to set up the sync, which you can get from OWA.
Click to expand...
Click to collapse
How?
Will it work without OMA (mobile access)? I don't think so. We don't have a frontend server to support ssl connection from mobile devices, and I'm pretty sure I've tried everything.
If you have a magic way to make it work I would really like to know.
I've been having the same problem...
...and I tried Activesync, but I get a 'certificate' error. I can't figure out how to get the certificate on my device.
I spent days searching the web for an answer... and I gave up after a while.
Oms said:
I've been having the same problem...
...and I tried Activesync, but I get a 'certificate' error. I can't figure out how to get the certificate on my device.
I spent days searching the web for an answer... and I gave up after a while.
Click to expand...
Click to collapse
If you have the .cer file, you just copy it to your device like any other file and run it from there. It should install. I had a few weird cert errors when trying to get mine to work but random poking and prodding seemed to get it up and running eventually.
maedox said:
How?
Will it work without OMA (mobile access)? I don't think so. We don't have a frontend server to support ssl connection from mobile devices, and I'm pretty sure I've tried everything.
If you have a magic way to make it work I would really like to know.
Click to expand...
Click to collapse
To be honest, I don't know, I'm not the exchange admin.
My company's fairly tightfisted when it comes to IT expenditure, so I'd be surprised if they forked out anything extra.
A cursory glance at MS's documentation implies that it shouldn't be necessary because as far as the exchange server is concerned, it can't tell the difference between WinMo's client and a regular web browser. I stand to be corrected by someone who actually knows what they're talking about.
Try installing the cert and setting up your server in Active Sync. It should just work.
I had problem in my work getting this working but after a clean install of OWA on our front end server everything worked properly. The only think needed on the X1 was to import the cer file if you going to use Exchange/Active Sync connection as someone has already suggested.
IE and Opera always worked it was just Active Sync which had problems.
I've just recently got an X1 and been trying furiously to get active sync to work. But as I don't have access to the exchange server at work, I've been trying to find out how to obtain a copy of the cert from my outlook.
Haven't been able to find anything, any suggestions would be much appreciated!
Grab the cert from the OWA website, cause it should be SSL encrypted. The browser shows the encryption with a small lock symbol. Click on it an get more information about the cert. When you opened it, open the cert for the CA shown on the last register. In there choose "save to file" and copy it to your phone.
On the phone open the cert with any file explorer, that will import it into the phone's cert store. From now your phone will trust your company internal CA.
This way is only useful, if your company uses self generated certs with an internal CA. You can see this, if your browser at home (the pc there has nothing to do with your company) show an cert warning, if you open the OWA website. If you really can't get acces to this site from the internet, forget all of the above
Brilliant! I'll give that a go when I get home! I'll let you know how I get on.
Thanks again mcfisch!
I just realised what I did wrong the first time. Under server, I put the wrong address didn't I. However, I've come across another problem, Where it asks for the login credentials, there' username, password and domain, what do I put under domain?
Its all sorted now! I can't believe I was being such a dumbass! I was over complicating things way too much!
Happy days!!!!!!!!
Hi
I used to be able sync to my work Outlook email via ActiveSync / Outlook Mobile Access (OMA). However, yesterday my work IT department disabled OMA on my Exchange server as they do not support anything other than the blackberry. Despite my protestation they are refusing to re-enable OMA. This leaves me with a big issue!
Does anyone on here know of a third party application that can sync outlook emails and calander using Outlook Web Access (OWA)?
I have found an application called Chronobis which is able to sync from OWA but only one way i.e. deleted items on Chronobis will not delete from my Outlook inbox and calendar appointments added won't sync to my outlook calander (or so I believe). Whilst this is a good start it really doesn't get me to where I need to be.
I am desperate to sync my work outlook emails to my new HTC HD2 (its the main reason I got it)!
Anyone got any other ideas / know of any other applications?
Would really appreciate any suggestions.
Thanks in advance.
Yes, you can use a service called Seven.
Thanks for your response.
I've had a look and it seems this could do the job! Seems that the only way to get it was to join the beta programme which I've done but when I put my the vendor in it doesnt give me the HD2 as an option.
Any ideas what handset I should choose that will work with the HD2?!
I've also read compatibility issues with Manilla 2.5 in their forums. Has anyone managed to get this working successfully on an HD2? Also, are you able to move emails to your different folders using this app and have them sync with the exchange?
Is this the best / only app out there for my requirement?
Sorry for all the qus!
Thanks again.
ActiveSync uses OWA. Put in webmail server, username, password and works.
OWA still works, like afterburn said, i got my calendar, email and tsks to synch. lol now all my contacts are on my university email accounts, pretty cool tho.
no need for thirdparty, active sync does it.
dont know what OMA is. but what you want is exactly what OWA gives you.
dont set your owa using HCT SENSE/MANILA SETTINGS. do it through normal out look ad account way. HTC tick boxes for tasks, calendar and other stuff are greyed out and only email is available.
but on the standard outlook mobile all the settings are there.
need a run through of how to set it up?
Thanks for your responses guys.
OMA is office mobile outlook. It is a setting within the exchange server which either allows or disallows a mobile device to access emails through the mail app. Having OWA does not mean that you will be able to access your emails from a mobile device (except through the mobile browser).
Activesync uses OMA rather than OWA so at the moment I'm stuck!
As a result I need an app that syncs via OWA.
Seven seems to be able to do it but I could do with any answers to my qus above.
Happy to be proved wrong on this but one day it was all working fine and the next my exchage server settings had been changed and it stopped working.
Any exchange server admins on here who can confirm my thinking is correct?
Gooner4_1998 said:
I've also read compatibility issues with Manilla 2.5 in their forums. Has anyone managed to get this working successfully on an HD2?
Click to expand...
Click to collapse
I'm using Seven on HD2. There were compatibility problems with custom ROMs on other devices based on leaked Leo Manila.
Why don't you use Blackberry Connect on your Wm device? That way, you can sync the same way as Blackberry devices. Of course that requires you to have BB access rights, but since they are so BB happy, you may be able to get that.
You can get it here: http://www.htc.com/us/mobile/connect/8925/install/default.html
Of course it is not specific for the HD2, and I have no idea if it'll work, but it is worth a try.
BB connect sounds like a good idea, wasn't aware it was a possibility, thanks.
I actually have a BB from work so I know that I am set up for it. However, I work for a company that are very keen on security so there is no way they will give out the settings I would need (its set up by the IT department and then just given to you).
Is there any way to get the info / settings I need from my current blackberry? Ive had a look on it and can't see anything obvious.
Just checked through some documentation on BB connect and unfortunatley it requires that I install ActiveSync and BB Connect on a computer connected to my works network.
As I dont have admin rights on my work laptop I won't be able to do this (unless anyone knows how to install programs without being an administrator!).
Looks like Seven might be the bset solution!
Vangrieg, which handset did you choose to set up for the HD2?
Thanks
I admin an exchange server, the most common reason for OMA not working is if there isnt a valid ssl cert for the domain, but i can confirm that as you mentioned, it will deffo not work if mobile access is turned off on the user account (there are 2 seperate options for web and mobile access)
i dont see any decent reason why a server admin would disable it, he must be on a power trip or sommert!
Thanks lancemate.
Could the valid ssl cert be the reason even if others in my company are still able to access as before? Its only affecting me. I've set up one of my collegues mail accounts on my phone to see if it still worked and it did without any issues.
When I called IT they said they hadn't changed any of my settings so I had assumed that OMA was the issue. I asked them to check and to re-enable and they told me they were unwilling to even look at my settings!!! Our IT department has been moved to India which makes it even harder to get any help!
Could an ssl cert suddenly just expire?!
Is there anyway of me to get a valid ssl cert for the domain witout going through IT to see if this is the issue?!
Been doing some more research and want to see if getting an ssl certificate onto my phone will make it work. Absoloutely no idea if it will work but its the last thing I can think off!
Is it possible to download the SSL certificate from my OWA site?
If I double click on the padlock in the bottom left corner I can get the certificate details up on the "details" tab (although there are loads of files and I don't know what I'm looking at!). When I click "copy to file" the export wizard come up but I have no idea where to go from there!
Anyone able to offer any assistance please?
Also, I'm sure this is a stupid question but would I need to put this certificate on my phone or could I use a different one?!
Thanks
It cant be an SSL Cerificate issue if your Colleague's account works on your device.
It MUST be that OMA is disabled on your account or something else is horribly wrong. As mentioned above i cant see any reason why an Exchange administrator would disable OMA.
Can you connect to your account using activesync on a different device to check whether its the phone or settings on server side?
To help you with using Blackberry Connect as a possible solution here are some resources on how to run programs that require admin level on machines you havent been given admin rights to. Some methods cover your tracks completely and others simply let you create/amend and delete windows accounts and associated rights in whatever way you need.
i would suggest using the first link to create a bootable usb stick that loads a modified linux command prompt. You can then use this to give yourself local admin rights.
http://pogostick.net/~pnh/ntpasswd/
http://www.jms1.net/nt-unlock.shtml
http://internetbusinessdaily.net/how-to-hack-a-window-xp-admins-password/
I've tried to set up on 2 other phones, bith with no joy so I'm guessing its the server side rather than the phone.
Is there no way that its anything to do with the ssl certificate? Are they set up company rather than by user? Will my suggestion of putting a certificate on my phone definately not work (if I could even find out how to export it from OWA)?!
I also cant see why the OMA would have been diabled so thinking it must be something else!
Thanks
I share Gooner's concerns and look forward to finding a solution. 1) My company has not yet enabled mobile devices to sync via Outlook Web Access. 2) Blackberry Connect does not yet work on HD2. There is a thread for BBC on this very same forum.
I am confident that a solution will soon emerge for 1) and/or 2).
Audio Oblivion said:
It cant be an SSL Cerificate issue if your Colleague's account works on your device.
Click to expand...
Click to collapse
Well, sometimes you need to install the certificate manually on your device to make it work. That's the case where I work - we use a self-signed certificate.
I use zarafa as a direct replacement for exchange, it syncs my emails,calendars, contacts etc.
It allows push email as well.
Hi JMes
After looking around I have found it appears that there are 2 services that will allow you to sync a mobile device using OWA, even if it is not set up for OMA.
Seven - Currently in beta but others have had success with this service on an HD2. I believe that it will sync Calendar, Tasks and Email.
Emoze - Also allows you to check outlook via OWA and offers a free service or a paid for service. Paid for service allows you to remove the "sent from emoze" tag allows attachemnts to be sent up to 2mb (rather than 100kb). Think it costs 10 euros a year.