Database Users

Push Email with Exchange Server?

Hi all, im kind of new to this but i just read about push email with exchange server and i was wondering how i could use it with my mda vario. I've already installed an updated rom with push email but i dont know how to use it. can any one fill me in on this? thanks for any help.

You need a Exchange 2003 server with at least SP2 installed. Also a UMTS/GPRS connection because is not working over WIFI.
Bitfrotter 8)

Go to www.mail2web.com, sign up there. Than put the settings from the website in the Exchange Server settings in Active Sync on your PPC. Set your current email address to automatically forward your email to your mail2web email address. Enable GPRS and enable push email from the Comm Manager and bingo, push email is yours.

Ok, ive already signed up with mail2web but i want to automatically retrieve hotmail emails. i don't see an option on hotmail to forward all my emails to mail2web. am i missing something here? sorry, im inexperienced and all and these are probably lame questions and all. but please help me out. after reading that article i got hyped up in doing this. thanks for any replies.

Bitfrotter said:
You need a Exchange 2003 server with at least SP2 installed. Also a UMTS/GPRS connection because is not working over WIFI.
Bitfrotter 8)
Click to expand...
Click to collapse
I've gotten DirectPush to work over WiFi... Maybe that was an earlier ROM version though... I don't recall the circumstances under which I got it to work.

MS says that Direct Push does not work over WiFi. WiFi does not allow disconnected connections (in other words, a connection that allows for the data stream to be suspended). If WiFi did it, it would require a continuous connection that would drain the batteries at a very rapid pace.
Setting up Exchange for Direct Push is pretty easy. I set up ours in about 5 minutes.
One of the coolest things you can do with a correctly configured Exchange 2003 system is with the Mobile Admin pack (free download from MS). It allows you to tell the PDA that it needs to "self-destruct" in case the phone is stolen. A remote wipe will do a hard-reset on the phone, deleting all data not stored on an external SD.
I usually get my email on the MDA faster than Outlook on my desktop.
If any Exchange admins are out there, I can post how to set it up if anyone needs help.

exchange/activesync
Yes please!

Hotmail has deleted the possibility of forwarding mail automatically a few years ago in the free version, only Hotmail Plus subscribers can use this option. With gmail however it is still free. So a basic hotmail account will not be able to use Push over Exchange. You can however sign in to MSN Messenger on your device and will then be notified as soon as an email arrives on the hotmail server. This will cost you extra data charges though, since contacts coming online will also result in data transfer to your device.

Romp said:
MS says that Direct Push does not work over WiFi. WiFi does not allow disconnected connections (in other words, a connection that allows for the data stream to be suspended). If WiFi did it, it would require a continuous connection that would drain the batteries at a very rapid pace.
Setting up Exchange for Direct Push is pretty easy. I set up ours in about 5 minutes.
One of the coolest things you can do with a correctly configured Exchange 2003 system is with the Mobile Admin pack (free download from MS). It allows you to tell the PDA that it needs to "self-destruct" in case the phone is stolen. A remote wipe will do a hard-reset on the phone, deleting all data not stored on an external SD.
I usually get my email on the MDA faster than Outlook on my desktop.
If any Exchange admins are out there, I can post how to set it up if anyone needs help.
Click to expand...
Click to collapse
that would be awesome if you know of a tutorial anywhere on this..

so by creating an exchange server as romp said, you can sync any email including hotmail? well that's really a bummer that microsoft disabled forwarding on hotmail. Its mainly my primary email which all my friends/family know. so it would be a miracle if anyone knew how to sync hotmail without subscribing to their hotmail plus.

Well, getting outside emails are a bit more complex. This is usually for a business, but there are plenty of POP-to-Exchange plug ins that would allow getting Hotmail emails. Of course, you would need the Hotmail Plus for the POP.
http://www.slipstick.com/exs/popconnect.htm
My answer was more concerning the Exchange Direct push question, not the hotmail one.
Where I work (yes, I did set up the Exchange system) we have GFI spam filtering and virus filtering (www.gfi.com) and they have a POP2Exchange bridge included. It just checks the account, downloads any POP emails, and drops it in the right mailbox.
Exchange is a complete system, not just mail. It has webmail, Windows Mobile direct push, calendar, contacts, and more. Unless you are in a company with Exchange or Small Business Server, its not a cheap thing to do for a home network.
If you DO have Exchange at your office, run to the IT guy and hurt him until he sets your phone up on it. Its all the functionality of Blackberry and more, built into Exchange.
I'll write that tutorial, g0nk.

ok so if we go the mail2web route... i dont need to install exchange 2003 on a pc myself? does it only work on windows server 2003?
im interested in doing this at my job but i want to make sure it is not too difficult
edit.. well we have our own domain email addresses so the [email protected] is not an option..
any suggestions?

Romp said:
Exchange is a complete system, not just mail. It has webmail, Windows Mobile direct push, calendar, contacts, and more.
If you DO have Exchange at your office, run to the IT guy and hurt him until he sets your phone up on it. Its all the functionality of Blackberry and more, built into Exchange.
I'll write that tutorial, g0nk.
Click to expand...
Click to collapse
1) Agreed
2) I am the IT guy and it don't work on our server - the rootcertificate won't install to the PPC - an MS acknowledged problem............
3) Please forward ASAP !! Thanks !! :lol:

Is it a self published cert? Because you CAN get any externally issued cert to work just fine. We use a $15 GoDaddy cert with no problems.
The big screw up most people have with the cert (myself included) is that the cert is not correctly installed, even though it says it is.
Cheaper certs are called "Chained" certs. All certs need a path back to one of the big cert companies. So, companies like GoDaddy get approved to be second level cert issuers. IE on the PC will look at the cert and track it back to the main cert issuer. For example, the cert on GoDaddy goes from GoDaddy, to Starfield, to VeriCert. The VeriCert certificate is installed on all PCs.
Anyway, the problem is that the PC can follow an undefined cert path, the PPC can't. If you install the cert on the server, IE on the PC can figure out the whole path, PPC can't. So, the big thing is to make sure the MIDDLE CERTS are installed on the server. Even though everything seems fine, chances are that the middle ones are not (in this case STARFIELD)
The easiest way to find out if the cert is valid or not is try to get to your webmail on PIE. If you get a message about the cert, your server is not set up completely.
For my server, I had no luck until I found the Intermediary Cert and installed it. https://certificates.starfieldtech.com/Repository.go
Once that was done, my GoDaddy cert worked on the PPC and syncs went perfectly. Once the server has all the certs in the cert path installed, the PPC can validate each level. Until then, its clueless. Most people think you need to install the cert on the PPC. Its the server that needs it.

Does the self published cert only cause problems with direct push? I've got the "old" polling method working. I created a root CA on my server to sign the cert created for the web server and then turned that root CA into a CAB which was installed on the PPC. I should say that my phone doesn't have an AKU 2.xx rom on yet so I've not tested push mail.
This is all outlined in the following doc :
http://www.microsoft.com/technet/itsolutions/mobile/deploy/msfpdepguide.mspx
Also look at http://support.microsoft.com/kb/817379 if you are running a non sbs2003 exchange server in a configuration that doesn't have a front end/back end exchange server configuration. As there are some minor tweeks needed to the registry and to the default web server setup.

If you can do a remote Activesync, then DirectPush will work just fine.

A newbie Direct Push question:
I upgraded my 8125 ROM to the official Cingular June 19 version, and direct push SEEMS to be working great my my Hosted Exchange provider. When new email comes in to my Exchange server and/or a task / calendar / contact is changed on the desktop Outlook client, those get pushed quickly to the 8125.
Problem is, it doesn't seem to work in reverse. For example, IF I get an email pushed to me on my PDA, I read it and delete it on my PDA.....that deletion action is NOT getting syncronized back to my Exchange server. Is that by design, or is indeed something wrong?
Thanks in advance!

not sure if it helps, but you can change when pocket outlook deletes mail, there are 3 options:
on connect/disconnect
immediately
manually
I dunno if changing that will help you at all, but its in the pocket outlook options.
I'll shut up now, in case I misunderstood

jmel said:
not sure if it helps, but you can change when pocket outlook deletes mail, there are 3 options:
on connect/disconnect
immediately
manually
I dunno if changing that will help you at all, but its in the pocket outlook options.
I'll shut up now, in case I misunderstood
Click to expand...
Click to collapse
I appreciate your reply, but my question is beyond that......it centers around Driect Push.....my thinking is, regardless of that setting you referred to, once the email is deleted on the PDA, the PDA should "reverse-push" that deletion to the Exchange server, and mine does not seem to be doing that.
I hope that is a little clearer?

No, his answer was right. The reverse of the Push is not the same. You have to set the options as Jmel suggested. Its basically to save data.
This allows you to go through your mail, delete all your spam and crap, then update the server. Doing so immediately would be a waste. Recieving/sending emails is considered vital, deleting them...not so much.

Direct Push - Connects & Syncs, but Inbox remains empty

I've searched and searched, but I can't seem to find anyone with this problem.
Basically, I'm trying to get my new Treo 750 to sync over wireless with my Exchange server. I run the Exchange server from my own house, on it's own domain. I've upgraded the Treo 750 to WM6. I previously did not try wireless sync on WM5. My Exchange server is 2003 SP2.
At first, I tried connecting via SSL only to get a message about the certificate not being valid. After fighting and fighting with trying to get the cert on the phone, I finally gave up and disabled SSL on the device in an attempt to connect.... via any means possible.
What I first thought was success has turned into another problem. I know I'm communicating with the server, as the policy from the domain controller made me set a device password. It was at that point that I knew I was getting somewhere. Now, when I hit "sync", I see it checking for changes. At the bottom of the screen, it'll run through each step: Contacts, Calendar, Email and Tasks.
Let me see if I can describe this..... It'll briefly pause at say... 0/80 for my Inbox, then count (very quickly, in large increments) till it hits the 80 and move on to the next item in the synchronization list. This cycle restarts after 5-10 seconds.
When I go to look in my Inbox, it's empty. The only thing I see is at the bottom: "Outlook E-mail 0 Items". Same with Contacts, Calendar, etc...
Now here's the kicker. If I send myself a test email from an outside account... say, Gmail, the sync app will then show "Email 0/81", then tick up to 81 and move on to the next item. However, nothing is downloaded. I can pull up a list of all the personalized folders I've created for my mailstore, and they're all there. I can "subscribe" to them, yet they remain empty as well.
I'm completely at a loss. I don't know what else to do at this point, and it's proving to be a difficult thing to search for. Any advice you can give would be very much appreciated....
As I said, this sync thing is happening pretty much non-stop. It'll rotate through the 4 steps (email, contacts, calendar, Tasks), wait a few seconds, then start it all over.
I've noticed that no other net apps work while this is happening. I actually have to go into ActiveSync and hit stop. After that, net applications (IM, PIE, Opera, etc...) work just fine.

Here is a (truncated) log from the device.

That looks pretty similar to the log I get from my device when I ActiveSync to Exchange. Jave you tried doing a backup and then hard resetting? I find that DirectPush is very finnicky with when it does and doesn't work but may just be my server.

Actually, to completely eliminate the device, I setup the MS WM6 emulator from a computer on an outside network. I got exactly the same thing as on the device. That pretty much tells me it's something on the server.
Here's another tidbit that might help. Before getting this phone, I setup BES Express on my Exchange server. I had problems with it working at first, and read through several guides before I had permissions working right. To this end, I made a lot of permissions-based changes on the Exchange server.
Could this be a permissions issue? How can I check if the permissions are correct?

Ok here's your problem, running another MAPI client on an Exchange server is NEVER a good idea. If you shut down the BES services and then reboot the server, what happens? Also, have you tried checking the Exchange Server event viewer for any info on what's happening server side?

Urthwhyte said:
Ok here's your problem, running another MAPI client on an Exchange server is NEVER a good idea. If you shut down the BES services and then reboot the server, what happens? Also, have you tried checking the Exchange Server event viewer for any info on what's happening server side?
Click to expand...
Click to collapse
Very good point. I hadn't even consider that. I don't even need it anymore.
That being said, what is the best way to go about uninstalling BES Express w/o jacking up the rest of the Exchange system? Also, have you ever actually heard of this causing the problem I'm experiencing? You sound pretty darn certain when you say: "Ok here's your problem". Each time I find or come up with a possible solution, it never seems to make a difference. Sure, my Exchange installation is "cleaner" and more standardized with each solution I try, but it never resolved the issue.
If you can provide me a decent guide or recommendation for uninstalling BES, I would appreciate it. Unless you have some better tips, I'm using these two pages as guides:
Perform a clean uninstall of the BlackBerry Enterprise Server
How to uninstall and re-install BlackBerry Enterprise Server on the same computer with minimal disruption

Ok, stopped all the services, uninstalled BES, deleted all related program directories, and removed all associated registry keys. Logged out of BESAdmin account and removed it from Active Directory.
I did all this from Remote Desktop, so the only thing left to do is reboot the server. I could do it remotely through command line, but it has a habit of freezing up during shut down (it's been doing it for years, doesn't seem to harm a thing). So I won't be able to reboot until I get back in town tonight.... just in case it freezes.
I have a few questions, though. Do I need to make any changes to MAPI (remove, stop, change, etc...)? I still need IMAP access for remote relatives, but I'm gonna get rid of that soon once I get them setup through the VPN.
Anything else I should remove/change?

Oh yeah, just for ****s and giggles, I tried synching again, both with the actual Treo 750 and also with a WM6 emulator on the remote server. I've also tried running the WM6 emulator from the same network as the Exchange server, just to eliminate the firewall, as Direct Push only seems to use ports 80 or 443, depending on whether you have SSL enabled or not.
Correct me if I'm wrong about the firewall ports.

Those are the same ports I have open, but much like yourself (and correct me if I'm wrong) just a casual Sysadmin. While I'm not entirely certain if BES is your issue, I'm inclined to think it may be a MAPI collision between the two. I haven't used BES myself so I can't really advise on the best method to uninstall, but I had a similar issue where my Outlook clients couldn't connect when I installed Outlook on the Exchange server. On another note, why set up VPN when you could just configure RPC over HTTP if you're running the server on Win2k3, it's probaly cut my support calls with users by aboyt 25%. If you'd like I can give you access to a server to compare it to, just PM me if you think that'd help.

I just saw that you also had IMAP open, that's definetly not going to be causing the issue, as I also have that running on my server and have people using it at this very minute. Also, have you tried checking on your device if you go into ActiveSync>Right Softkey>Options and then checking that the boxes besides Contacts, Calendars, Tasks, etc... are checked? I know it's stupid, but I've had issues like that before where I couldn't figure it out for the life of me.

Urthwhyte said:
Those are the same ports I have open, but much like yourself (and correct me if I'm wrong) just a casual Sysadmin. While I'm not entirely certain if BES is your issue, I'm inclined to think it may be a MAPI collision between the two. I haven't used BES myself so I can't really advise on the best method to uninstall, but I had a similar issue where my Outlook clients couldn't connect when I installed Outlook on the Exchange server. On another note, why set up VPN when you could just configure RPC over HTTP if you're running the server on Win2k3, it's probaly cut my support calls with users by aboyt 25%. If you'd like I can give you access to a server to compare it to, just PM me if you think that'd help.
Click to expand...
Click to collapse
I'm not 100% sure, but I don't think Direct Push uses MAPI at all, so I'm pretty sure it can't be a "MAPI collision", so to speak. I was able to completely remove BES w/o any issues. I rebooted the computer last night, just to be sure, and I'm still showing the same problem. ActiveSync connects and looks like it's synchronizing, but in the end, nothing is actually downloaded from my phone.
I really believe it has something to do with permissions. I say this, because I had a very difficult time getting BES to work. I had to mess with a lot of permissions to get mail flowing to my Blackberry. I can't be sure that I didn't goof something up in the process.
With that being said, everything else works just fine. I can use OMA. I can use OWA either HTTP or SSL (forms-based authentication disabled, of course). I can connect without issue from IMAP, or directly via Exchange over VPN, etc...
Urthwhyte said:
I just saw that you also had IMAP open, that's definetly not going to be causing the issue, as I also have that running on my server and have people using it at this very minute. Also, have you tried checking on your device if you go into ActiveSync>Right Softkey>Options and then checking that the boxes besides Contacts, Calendars, Tasks, etc... are checked? I know it's stupid, but I've had issues like that before where I couldn't figure it out for the life of me.
Click to expand...
Click to collapse
I have tried that. I've also tried changing the settings for email from 3 days, to all the other options. It will change the amount of emails ActiveSync "sees", but they still do not download to the phone.

Oh yeah, as far as RPC over HTTP goes, it's one of those "I've always used..." things.
What are the advantages of RPM over HTTP?

I'm not quite sure it's a permissions issue, because as far as I know ActiveSync only uses the standard exchange accounts/services,+ a few virtual directories. What you can try doing is deleting the ActiveSync virtual directory, and then restarting the IIS and Exchange System Attendant services and see if that helps.
RPC over HTTP alleviates the need to have to login to a VPN to check email, it also makes it much easier to configure the client, as they only have to enter their Username+Password and enter the FQDN of the server.

Urthwhyte said:
I'm not quite sure it's a permissions issue, because as far as I know ActiveSync only uses the standard exchange accounts/services,+ a few virtual directories. What you can try doing is deleting the ActiveSync virtual directory, and then restarting the IIS and Exchange System Attendant services and see if that helps.
RPC over HTTP alleviates the need to have to login to a VPN to check email, it also makes it much easier to configure the client, as they only have to enter their Username+Password and enter the FQDN of the server.
Click to expand...
Click to collapse
I deleted the ActiveSync virtual dir (which actually had a much longer name), as well as the OMA virtual dir.
Now I get this message when I try to connect. I guess I need some help on rebuilding it now... heh.
As for RPC over HTTP... brainfart. I knew what it is, but I wanted access to remote shares.
As far as permissions go, I'm pretty sure it's not the problem as well. I just created a brand new user and had the same thing happen.

Flapjack said:
I deleted the ActiveSync virtual dir (which actually had a much longer name), as well as the OMA virtual dir.
Now I get this message when I try to connect. I guess I need some help on rebuilding it now... heh.
As for RPC over HTTP... brainfart. I knew what it is, but I wanted access to remote shares.
As far as permissions go, I'm pretty sure it's not the problem as well. I just created a brand new user and had the same thing happen.
Click to expand...
Click to collapse
Did you try stopping and then starting the Exchange System Attendant and IIS services, the folders should come back automatically. If all else fails, reboot and see if the folders come back.

Urthwhyte said:
Did you try stopping and then starting the Exchange System Attendant and IIS services, the folders should come back automatically. If all else fails, reboot and see if the folders come back.
Click to expand...
Click to collapse
I know that trick, but if there is anything wrong in the metabase, it will not be overwritten.
I'll be using this guide to completely blast out and rebuild all the owa-related folders:
http://support.microsoft.com/kb/883380/en-us

Ok, I rebuilt everything using Method 2 in the above-linked guide.
Now, I'm getting support code 0x85010014
This pages says the cause is SSL being enabled on the main site, but it's definitely not. There are other vdir pages that have SSL enabled, but none of the default MS dirs... only personal ones I created for other things.
http://www.messagingtalk.org/content/479.html

Is there any chance that you have FBA enabled, if you do theres supposed to be some way that you can trick ActiveSync to use a different folder or something. It wasn't really worth it to me, so I just ended up disabling it.

Urthwhyte said:
Is there any chance that you have FBA enabled, if you do theres supposed to be some way that you can trick ActiveSync to use a different folder or something. It wasn't really worth it to me, so I just ended up disabling it.
Click to expand...
Click to collapse
That's the thing. I don't even have a certificate on the site right now. I got rid of the self-issued one, and now I'm waiting on my GoDaddy one. So I don't have FBA enabled. That's why that messages seems so weird...

Hmm, that's odd. I got the same error when I first configure ActiveSync, but now I forget what I did to resolve it. Also, is there any chance you have some sort of IM application, such as Google Talk or AIM? It's a bit easier to resolve these things if you can have a more back and orth communication then a orum post.

Connecting to Exchange Server

My company runs an exchange server for email, and I was wondering if anyknow knows how to connect to them, using the mogul. I went through the setup on the phone, with no success...Are their any additional steps required to connect to the server when you are not on the same network as the server?

Missing Certificate ?
I think you'll have to install the certificate from your Mailserver on the phone to get it working.
Do you get any active-sync error code when you're trying to sync ?
In general you get an error-code in ActiveSync which is telling you what's wrong...
IMHO the best idea would be: aks your IT-Stuff in your company

you need to add a server in active sync with your companys exchange server addy and your username/password

To be clear you need to enter your companies OWA server address. At most small companies this is your Exchange server and at most large companies it is your ISA server.
Example:
You access OWA using https://exchange.mycompany.com/exchange
You enter: exchange.mycompany.com in the activesync settings and you use your username, password and domain to authenticate
You also need to make sure Outlook Mobile Access is enabled on the Exchange Server and on your Exchange Mailbox. You will need to contact your IT Admin to verify these settings.

I'm in the same boat as the OP. I had been trying to hit the mail server directly or via VPN, with no luck, probably due to no certificate. Never thought about OWA. I set this up as indicated in the prior post, and checked 'Tasks' only (just to run a quick test), and it sync'ed fine. I then checked email and calendar, and now it takes me to a company sign-in web page (same page I encounter when using web access to OWA). Weird thing is the page is in the ActiveSync window and does not appear to be rendering correctly or completely (e.g. no 'submit' button). Nonetheless, I sign in and click where the submit button "should be" and the page goes away and it appears to start syncing, only to take me back to the sign-in page again after 15-20 seconds. Any suggestions on how to get past this point? I've tried logging in to OWA from IE, but ActiveSync still brings up this sign-in page. And yes, I've got my userID, pswd, and domain properly set up as well. Thanks.
BTW, my company IT won't help because they only support handheld access for specific company-issued devices.

try using mail.yourcompanymailserver.com/oma
its a lightweight version that handles easy in mobile browsers (only if your IT guys have enabled it)
as for the OP your exchange settings could vary depending on how your admin set it up, ssl (requiring a certificate) or not. to get the certificate from your company you can dl it from the server mail.yourcompanymailserver.com/cersrv
you log in using your mail credentials and you select download certificate chain and select a der 64.
save it to your phone and just install.
chances are though if your company is using a lot of treo's they dont require ssl because you can't install self issued certificates on them (good work palm). so if you want to ask your IT guys their setup and post it here i can try to walk through it with you.

this is my situation and how i got it to work.
Although i tried to internal address of 1x01po2s.domain.name, that didn't work.
I thought about it for a while, and reasoned if i can access my companies exchange server outside the network through a http://mail.domain.name address, then maybe that'll work hahaha
BAM! it did and now it works perfectly fine. Conincidentally, since i started trying to get this going last week, i emailed a few guys i know and the last one who got my email (it was forwarded to try to solve the problem) said that because of security policies, i am not allowed to do this. Ooops!
Here is a quick run down of my settings:
server address: mail.domain.name
ssl is selected (checked)
username: exchange/nt workstation login name
password: user password
domain: network domain (we have different domains)
save password is selected
under advanced you can select whatever options you like
next select e-mail, and any other options you want
and you're done!
I also enabled the push email icon and get my email regularly on my phone throughout the day.
Well, i hope that this helps some of you out.

server address: mail.domain.name
Click to expand...
Click to collapse
just so folks know there is no standard for this, its whatever subdomain your company decided to put OWA on, for my company its webmail.companywebsite.com
best thing to do would be to ask someone in your company how to access email from outside the office using internet explorer, thats the address your lookign for

Sprint mogul (Titan) WM6.1 Rom update killed exchange server activesync
(Sorry in advance for the long Email) I purchased a Mogul from RS about three weeks ago. For the first week, it worked great! I logged into my company exchange server down loaded and synced email, cal,contacts,tasks ... was very excited. I also got very excited when I started t read threads in this blog .... it seems like there are some pretty smart members maybe someone can help!!
Noticed that there was a new Rom (Sprint TV and improved connection) installed the ROM.
Have spent endless hours with HTC technical support, sprint technical support (not an appropriate name). At times managed to get the email to load but never again Cal, Tasks, contacts. Always able to get sent emails to load (by checking option) . I'm left with a couple of alternatives (any others would be greatly appreciated (actually I really like this phone but I need my email,schedule,etc to work) The error is 0x8503001C there is no exact description about this from MSmobile it seesm to be an awh**** code. Searching on the web provides 1000s of hits unfortunately not just my issue.
o Go to an early Rom WM6.0. So far it seems like to do this I need to unlock the phone then flash the earlier rom?? Since no SIM card I need to hack the registry?? There are several products out there which is best (I do not mind paying for somethng that works well). I down loaded several "Oficial ROm versions ... unfortunately did not write down the number of the one the phone came with.
o Find some way of getting this thing to work well to keep the extra features
o My grace period ends in a week ... cancel with Sprint go to Att but there is not a 3G phone I like ... only Iphone ... it has issues for exchange server??
o I got my wife a Touch at the same time (it runs WM6.1) same issue. Downloaded once my corp email no cal, etc.
o I was told that this Rom was cooked up by MS & Sprint what a disaster
Please, please help ... Thanks in advance
Scurfer

Exchange email and Skype not working after Upgrading Sprint Touch to Wm6.1
The Exchange activesync died at connection and never can sync my company emails after I upgraded Touch to 6.1 Sprint/HTC ROM. Skype also does not work, no sound after first ring, even with 2.2.0.45. I like the GPS and Rev.A speed, and do not want to risk downgrading the ROM. Anybody encounter ssimilar situation?

Microsoft Exchange Server

I am trying to configure Microsoft exchange server to get my work emails on my universal.however even though i have my setting all ok,and pda is connecting to internet,no emails are being downloading.
I am getting message that folders have been synchronized but email are neither being sent and received.
tried to speak to my works IT guys who are insisting all settings are OK.
funnily enough i configured my pals pda ,who happens to have a universal like me but using a different phone company ,and all worked beautifully.
when i contacted my phone company they said that all is ok from their side,but I still am not succeeding.
any idea guys?

I think they should enable a certain service. With me all worked fine untill a partly HD crash, now I can still get e-mail into Outlook, but not to my PDA any more. I believe it has to to with Public Directories. At least that's the part what's wrecked in my server.
Good luck!
Bas

OP, I'm assuming you are referring to DirectPush, I would double check with IT that you have your account enabled for User Initated Sync, and that you have all options configured identically to what IT gave you. Specifically, it could be that your company is using SSL and you have yet to export the certificates that are needed to your phone, rendering it unable to sync.

Urthwhyte is right about the ssl, installing it is a simple as accessing the certificate file though your file manager. You might also be experiencing the same problem I am, where your service provider doesn't accept your businesses certificates (doesn't apply to wifi connects).
If you really want it to work and you don't care if ppl pull the data off the air, you could disable ssl if it's not required.

HTC Magic with Rogers ROM - Activesync not working?

Hi,
I flashed RogerMagicV2a-signed onto my Vodafone HTC Magic and everything works like a charm. The device seems much faster to me now and I love the keyboard.
But I have problems getting Activesync to work. If I enter my account details including the correct server name (SSL checked) it alwas complains about wrong authentication (Authentication failed). I also checked with "Touchdown" which successfully showed my inbox using the same credentials.
Does anyone know about problems with Rogers Activesync implementation?
Server is Exchange 2007 (I assume).
Thanks in advance!
ff

*bump*
Does anyone have an idea?

First: *PLEASE* don't bump (and more important: don't bump so soon)... if someone knows the reply be sure it will be posted.
Second: As far as i know (maybe i'm wrong) there is no software named ActiveSync, are you talking about HTC Sync? If TouchDown works meybe it's a software problem so meybe you will obtain more help from the software authors .
Cheers

Ok, sorry for that! I am so impatient because everything else works great and the ActiveSync support would be the last thing to make the Rogers Rom perfect!
With ActiveSync I mean the integrated support of the Rogers Rom to sync with a Microsoft Exchange Server over the air which would be great because then I could finally sync my work calendar and contacts with my HTC Magic.
Perhaps something is broken in the Rogers Rom regarding the ActiveSync client - that is my question here.
Thanks in advance and sorry again for bumping. Won't happen again

I read somewhere that the Rogers ROM's Active Sync does not support PIN security settings forced by the exchange server. This would be bad.
Search for that topic, I'm not sure if it was here at xda-devs.
Cheers,
Hotas

Yes I also read this but our Exchange Server does not have PIN security enabled. I tried another app (I think it was Roadsync or Touchdown) and it worked there.
But I would like to have my calender and contact entries integrated into the apps, not in a separate app like Roadsync does it.
Any other ideas?
Thanks and greetings from Germany
ff

Have you played with the Hero rom? I'm sure I saw some exchange mail options in there.

No not yet, perhaps I'll give that a try.
It's a pity, I really like the Rogers Rom...
Thanks.

ActiveSync Issues
Hi,
I now tested
- Moxier Mail (http://www.cyrket.com/package/com.moxier.mail)
- Exchange by Touchdown (http://www.cyrket.com/package/com.nitrodesk.nitroid)
and they both work.
Here is a part from Touchdown's log:
Version : 3.1.000
------------------------------
Configuration
UserID:user
Domain:domain
Server:sync.company.tld
ActiveSync Server::sync.company.tld
Class :com.nitrodesk.activesync.ActiveSyncServiceProvider121
SSL:true
Max Days:3
Options:333
Poll:60
ISA Flags:destination=Z2F&flags=0
Uses ISA:false
------------------------------
Does anybody have an idea why Touchdown and Moxier Mail work but the integrated ActiveSync solution from HTC does not?
edit://
Of course I used the same credentials and server settings.
Help appreciated!
Thanks
ff

That is corrent....the implementation on the HTC Rogers ROM for Activesync does not appear to support basic security (ie. PIN setting) that is by default on the Exchange Mobile settings.
I requested our IT dept. put me as an exception and it works fine. This will be an issue for any corporate users. Touchdown and Moxier both support PIN security, so you won't run into problems there, but it is VERY annoying.
e4.

fflightning said:
Yes I also read this but our Exchange Server does not have PIN security enabled. I tried another app (I think it was Roadsync or Touchdown) and it worked there.
But I would like to have my calender and contact entries integrated into the apps, not in a separate app like Roadsync does it.
Any other ideas?
Thanks and greetings from Germany
ff
Click to expand...
Click to collapse
Edit: wer lesen kann, sorry... habe gerade Schwachsinn geschrieben ;-)

To get it correct: I do not have to enter a "pin", I just log on using my normal Windows credentials, i.e. domain\username and password. This should work, right?
Or does "pin" mean the basic authentication using HTTP-Auth with my windows credentials?
Thanks!

PIN means the forced security policy, sent from the Exchange server to enable Remote Wipe for instance. On a Windows Mobile phone you need to enable the phone security key, which you have to enter after a defined time of no use or at power-on. The policy has to be managed by the phone in a way the Exchange server accepts, otherwise you are not able to sync.
Maybe that's your problem. Anyway I don't know, how TouchDown or RoadSync handle the security policy.
Schahn

Ok,
I think this is the problem.
To sum it up: HTC's integrated ActiveSync client does not support PIN security settings that are enforced from the Microsoft Exchange server. I also tried to set up device locking where you have to draw a line on the display - but this also did not work.
Is there a way for you developers or the guys at HTC to fix the ActiveSync client that it pretends to have PIN security settings enabled? Touchdown seems to do the same here because it works like a charm.
It would be great if some of you would find a solution for this!
Thanks for the great support here.
ff

Pin
I'm looking for exactly that. I have Hero installed on my Magic an I can get touchdown to work - sort of. It gives me a new inbox every time I sync and then I have to refresh the folders to get rid of the "fake" inboxes and get to my mails.
It works... badly, but still...
I'm also looking for an app that'll integrate into the phone.
Any new rumors, solutions or suggestions?
/Kvist
Denmark

Same problem here, the Rogers ActiveSync on my Magic won't work with my work Exchange server. However, TouchDown works. I heard that the Rogers ActiveSync requires Exchange web services or something like that, whereas TouchDown has real Exchange 2007 support. It seems like my corporate server only supports real Exchange 2007 synchronization :S
Has anyone found a workaround for this? I've thought about paying for an app like TouchDown, but it sucks if the Calendar isn't integrated with the phone's calendar.