Database Users

Funambol Open Source Push Mail

Has anyone ever tried this out?
I am not sure if you need to install the server application on you workstation or on the actual exhange server. Would like to give it a go, as my company I work for is so slow in implementing any kind of mobile mail acess (we will have WM10 with 8mp camera pocket pcs before my work has mobile mail access). :shock:

you could try intellisync Wireless email http://www.intellisync.com/pages/Products/Express/
I have a similar problem with my company being a bit slow on the uptake...this works perectly...really pleased.
You install an application on your desktop and on the device (all very simple) The desktop app syncs your mail etc to a webserver, then the app on the universal connects to the webserver and sync it down onto the device. Very slick. Bear in mind that you have to leave your desktop logged in to your corporate network all the time, which isn't a problem for me as locking the pc doesn't affect the functionality.

I have seen that, but I don't want to use 6 different programs and places to sync. My dad has Intellisync Mobile Suite 6.2 on his Jam and works like a charm, but I can't get my hands on the original installation package.
I can access my work's e-mail via the web through webmail, but I don't know the settings like port numbers etc to get my Jam configured to connect. Is there anyway one can find out these settings without asking IT, as they are still testing it and won't give it to me at this stage.
Surely if you can connect to webmail (exchange), then my Jam should be also be able to connect. Imate Mail also uses webmail and it works on the JAM.

VoodooBOB said:
I have seen that, but I don't want to use 6 different programs and places to sync.
Click to expand...
Click to collapse
Not sure what you mean...there's one app on the pc and one on the ppc.

cdally said:
VoodooBOB said:
I have seen that, but I don't want to use 6 different programs and places to sync.
Click to expand...
Click to collapse
Not sure what you mean...there's one app on the pc and one on the ppc.
Click to expand...
Click to collapse
I was just being sarcastic.
I know on 2 apps, but you still have a "middleman" where you data needs to be sync from the pc, then from there to the ppc, back to the web server and again back to the pc. I want to go straight to the exhange server, which I should be able to do if I can get my work's webmail settings.

I see! Have you looked at xmail from o2...similar but your ppc connects directly to the agenct on the desktop...

it does
it works so far, but it is a pain to configure.
i hooked it up to my mail server.
with the admin tool you need to (under win or x) configure a user, device and principal and there you go.
what the manual does not tell you: you have to replace PipelineManager with PipelineManagerGeneric in ds-server/config/Funambol.xml to get it to work with your IMEI, or configure your device with IMEI syncml ..
It smashes my funny german umlauts, though. There is a patch (already included in Funambol) that should configure my internal storage to use utf-8, still its using internal iso-8859-15 (what ever that is for..)
I didn't get it to Unicode until now..
I have not tried to connect it to my mail server.. and i have not tried push email yet..
Stefan

I managed to get exhange activesync to work. But since last night I can't get internet access via GPRS and this morning I can't get VPN access. No nothing wants to work anymore.
Looks like I have to reload my ppc and start from scratch, I have checked all my settings and see nothing wrong.

So I reloaded my Jam this weekend, connected to the work's mail server via GPRS and got my stuff.
Came to work this morning, changed nothing on the pc's settings, plugged in my Jam via USB, pressed sync and it connect without giving me any funny error messages that I got on Friday.
It is weird that it works now with the same setttings and now juts because I reloaded my Jam, it works. :x

help with funambol
trying to get funambol to work on my xda iis 2003se, anyone else got it working with the push email ive set it up how the guide says but i dont get where the log in info goes for it to get your email. anyone willing to do a step by step walk through.

80072fd Push with SBS2003

My IT guys have been trying to get this push email thing working and it seems to be one difficulty after another and is not as simple as pressing "push email" in the connection icon....
Our latest error appears on my device with the above error code stating
"the security certificate on teh server is invalid. contact your exchange server administrator or ISP to install a valid certificate to the server".
I have read that I need to buy a public certificate from a public authority (CA) or similar such as Verizon or Thawte. Is this the case, or is there a simpler way to get this push email working using the existing configuration and setup of the server?
We use exchange SP2, with outlook 2003 all around. Internet based webmail works correctly with full access, and activesync via PC works perfectly, but push email encounters the above error.
Any suggestions.

are you sure it's 80072fd or 80072efd ?

I don't have a solution, but the problem is described in M$ knowledgebase article: 915438 - see attached Acrobat .PDF.
I had already tried the suggestion in KB915840 to import the certificate from my sbs2k3-domain, but this had failed with "cannot access the certificate" - even with them on the device. However, certificates from my clients' servers, both sbs2k and sbs2k3, import without problems. This happened both before and after o2's AKU2 ROM update - so AKU2 is not the problem. In addition, I spent Easter *totally* reinstalling sbs2k3 and tested it immediately afterwards. All the sbs2k3/Exch2k3-Sp2 boxes are fully patched. The certificate itself is correct/working, since it works for Outlook Web Access via the web with laptops and even the Exec (Universal).
Whilst sync'ing from the workstation via ActiveStink/USB, if you turn off the SSL requirement the sync suceeeds, but that's obviously not a working solution via the 'Net.
Update:
Just had a thought, and checked the various certificates in a hex-editor. The one from my sbs2k3 box is a completely different format. :? I'll see what I can find out.....

maybe not related, but here's a list of all ActiveSync Server Error Codes: http://blogs.flaphead.dns2go.com/archive/2005/11/21/3202.aspx

80072f0d
Sorry, the correct code is 80072f0d.
I know your pains astage, but there is no way we are pulling the box down and putting it back up again, our server hosts 30 + staff simultaneously and I cant take it down just to fix my one desire to have push email.
But I do find it painful and frustrating that microsoft do not adequately support their own platforms and systems dont integrate as they should and as they are promoted.
M$ sks.

Re: 80072f0d
simon_darley said:
....I know your pains astage, but there is no way we are pulling the box down and putting it back up again, our server hosts 30 + staff simultaneously and I cant take it down just to fix my one desire to have push email.....
Click to expand...
Click to collapse
I'm not sure if it was clear from my reply - too tired - but rebuilding the server did not help at all.
Yeh, the pains of rebuilding SBS and having it all configured and running correctly when the staff arrive in the morning is not something I do willingly - hence the use of the holiday. It was done only as a last ditch attempt to solve this and another problem that had Micro$oft totally stumped - not related.
There is a difference in the certificate formats, so that's where I'm concentrating my efforts now. Will let you know what I find.

80072f0d error - the fix!
Just spent the past hour kicking and calling myself an £$%&* idiot.:x
Anyway, to cut the story short, the problem *is* indeed the damn format of the SSL certificate exported by sbs2k3. For the WM5 device to import it, it needs to be in DER X509 format.
If you have imported it into your PC/laptop for OWA/OMA/RWW, then you can easily export it from IE's Internet Options into DER format.
From Internet Options:
- go to Content-tab
- click Certificates-button
- find and highlight your certificate - I had imported mine into Trusted Root Authorities
- click Export-button
- click Next on wizard page
- enable the "DER encoded binary X.509 (.CER)" radio-button, and click Next
- enter a suitable path & filename, e.g.: "myserver.cer"
- click Next, click Finish, click Ok.
- Now copy the certificate to your PDA via ActiveSync.
- Open File Explorer on the PDA,
- Find the certificate file and launch it.
- click Yes to import it and you're done!
I think the reason why my sbs2000 certificates worked was that I had installed Certificate Services on those boxes and exported those certificate from there. I don't understand why some of my client's sbs2003 certificates were in DER-format, and others weren't, but we are talking about Microsoft software, so what else should I expect......

msfp and 80072f0d
After testing a few different certificate variations, the engineers that maintain our servers was able to send me two alternative certificates, one or bother of them appear to ahve worked effective.
So it imported, and now my active sync works for receiving these emails, now I need to look at these heartbeat pings and find out how I set the periodic checking.
Just wondering, normally if you dial a gprs/3g connection, you pay once, and stay connected all day. Does this now mean that it connects, downloads, disconnects, then 5 minutes later reconnects, downloads, and disconnects, thus paying a much larger reconnect fee everytime?
I am playing with this as a new toy, but I can see the costs are going to go ballistic....

and... perhaps for all those that are already experienced here, how does one send an email that remote wipes the device?
is there a command, or a key word or something that makes the system realise the remote wipe command....
sorry, I know this is off the topic of my original post, but thought you might know.
if not, I can start a new topic....!!!
The certificates that I was given was a server.cer and a root.cer.
If anybody needs to know, I can ask the engineers how they did what they gave me to get it to work.

The remote wipe is done from the sbs2k3 box - or rather the box running Exchange2k3Sp2. Your admin needs to install a small tool that he (Domain Administrator credentials needed) then accesses via IE.
Microsoft has published a new white paper (Feb 2006) that describes the whole procedure - just a shame they missed the need for the certificate to be in DER format. The white paper is: "Deploying Windows Mobile 5.0 with Windows Small Business Server 2003".

Direct Push - Connects & Syncs, but Inbox remains empty

I've searched and searched, but I can't seem to find anyone with this problem.
Basically, I'm trying to get my new Treo 750 to sync over wireless with my Exchange server. I run the Exchange server from my own house, on it's own domain. I've upgraded the Treo 750 to WM6. I previously did not try wireless sync on WM5. My Exchange server is 2003 SP2.
At first, I tried connecting via SSL only to get a message about the certificate not being valid. After fighting and fighting with trying to get the cert on the phone, I finally gave up and disabled SSL on the device in an attempt to connect.... via any means possible.
What I first thought was success has turned into another problem. I know I'm communicating with the server, as the policy from the domain controller made me set a device password. It was at that point that I knew I was getting somewhere. Now, when I hit "sync", I see it checking for changes. At the bottom of the screen, it'll run through each step: Contacts, Calendar, Email and Tasks.
Let me see if I can describe this..... It'll briefly pause at say... 0/80 for my Inbox, then count (very quickly, in large increments) till it hits the 80 and move on to the next item in the synchronization list. This cycle restarts after 5-10 seconds.
When I go to look in my Inbox, it's empty. The only thing I see is at the bottom: "Outlook E-mail 0 Items". Same with Contacts, Calendar, etc...
Now here's the kicker. If I send myself a test email from an outside account... say, Gmail, the sync app will then show "Email 0/81", then tick up to 81 and move on to the next item. However, nothing is downloaded. I can pull up a list of all the personalized folders I've created for my mailstore, and they're all there. I can "subscribe" to them, yet they remain empty as well.
I'm completely at a loss. I don't know what else to do at this point, and it's proving to be a difficult thing to search for. Any advice you can give would be very much appreciated....
As I said, this sync thing is happening pretty much non-stop. It'll rotate through the 4 steps (email, contacts, calendar, Tasks), wait a few seconds, then start it all over.
I've noticed that no other net apps work while this is happening. I actually have to go into ActiveSync and hit stop. After that, net applications (IM, PIE, Opera, etc...) work just fine.

Here is a (truncated) log from the device.

That looks pretty similar to the log I get from my device when I ActiveSync to Exchange. Jave you tried doing a backup and then hard resetting? I find that DirectPush is very finnicky with when it does and doesn't work but may just be my server.

Actually, to completely eliminate the device, I setup the MS WM6 emulator from a computer on an outside network. I got exactly the same thing as on the device. That pretty much tells me it's something on the server.
Here's another tidbit that might help. Before getting this phone, I setup BES Express on my Exchange server. I had problems with it working at first, and read through several guides before I had permissions working right. To this end, I made a lot of permissions-based changes on the Exchange server.
Could this be a permissions issue? How can I check if the permissions are correct?

Ok here's your problem, running another MAPI client on an Exchange server is NEVER a good idea. If you shut down the BES services and then reboot the server, what happens? Also, have you tried checking the Exchange Server event viewer for any info on what's happening server side?

Urthwhyte said:
Ok here's your problem, running another MAPI client on an Exchange server is NEVER a good idea. If you shut down the BES services and then reboot the server, what happens? Also, have you tried checking the Exchange Server event viewer for any info on what's happening server side?
Click to expand...
Click to collapse
Very good point. I hadn't even consider that. I don't even need it anymore.
That being said, what is the best way to go about uninstalling BES Express w/o jacking up the rest of the Exchange system? Also, have you ever actually heard of this causing the problem I'm experiencing? You sound pretty darn certain when you say: "Ok here's your problem". Each time I find or come up with a possible solution, it never seems to make a difference. Sure, my Exchange installation is "cleaner" and more standardized with each solution I try, but it never resolved the issue.
If you can provide me a decent guide or recommendation for uninstalling BES, I would appreciate it. Unless you have some better tips, I'm using these two pages as guides:
Perform a clean uninstall of the BlackBerry Enterprise Server
How to uninstall and re-install BlackBerry Enterprise Server on the same computer with minimal disruption

Ok, stopped all the services, uninstalled BES, deleted all related program directories, and removed all associated registry keys. Logged out of BESAdmin account and removed it from Active Directory.
I did all this from Remote Desktop, so the only thing left to do is reboot the server. I could do it remotely through command line, but it has a habit of freezing up during shut down (it's been doing it for years, doesn't seem to harm a thing). So I won't be able to reboot until I get back in town tonight.... just in case it freezes.
I have a few questions, though. Do I need to make any changes to MAPI (remove, stop, change, etc...)? I still need IMAP access for remote relatives, but I'm gonna get rid of that soon once I get them setup through the VPN.
Anything else I should remove/change?

Oh yeah, just for ****s and giggles, I tried synching again, both with the actual Treo 750 and also with a WM6 emulator on the remote server. I've also tried running the WM6 emulator from the same network as the Exchange server, just to eliminate the firewall, as Direct Push only seems to use ports 80 or 443, depending on whether you have SSL enabled or not.
Correct me if I'm wrong about the firewall ports.

Those are the same ports I have open, but much like yourself (and correct me if I'm wrong) just a casual Sysadmin. While I'm not entirely certain if BES is your issue, I'm inclined to think it may be a MAPI collision between the two. I haven't used BES myself so I can't really advise on the best method to uninstall, but I had a similar issue where my Outlook clients couldn't connect when I installed Outlook on the Exchange server. On another note, why set up VPN when you could just configure RPC over HTTP if you're running the server on Win2k3, it's probaly cut my support calls with users by aboyt 25%. If you'd like I can give you access to a server to compare it to, just PM me if you think that'd help.

I just saw that you also had IMAP open, that's definetly not going to be causing the issue, as I also have that running on my server and have people using it at this very minute. Also, have you tried checking on your device if you go into ActiveSync>Right Softkey>Options and then checking that the boxes besides Contacts, Calendars, Tasks, etc... are checked? I know it's stupid, but I've had issues like that before where I couldn't figure it out for the life of me.

Urthwhyte said:
Those are the same ports I have open, but much like yourself (and correct me if I'm wrong) just a casual Sysadmin. While I'm not entirely certain if BES is your issue, I'm inclined to think it may be a MAPI collision between the two. I haven't used BES myself so I can't really advise on the best method to uninstall, but I had a similar issue where my Outlook clients couldn't connect when I installed Outlook on the Exchange server. On another note, why set up VPN when you could just configure RPC over HTTP if you're running the server on Win2k3, it's probaly cut my support calls with users by aboyt 25%. If you'd like I can give you access to a server to compare it to, just PM me if you think that'd help.
Click to expand...
Click to collapse
I'm not 100% sure, but I don't think Direct Push uses MAPI at all, so I'm pretty sure it can't be a "MAPI collision", so to speak. I was able to completely remove BES w/o any issues. I rebooted the computer last night, just to be sure, and I'm still showing the same problem. ActiveSync connects and looks like it's synchronizing, but in the end, nothing is actually downloaded from my phone.
I really believe it has something to do with permissions. I say this, because I had a very difficult time getting BES to work. I had to mess with a lot of permissions to get mail flowing to my Blackberry. I can't be sure that I didn't goof something up in the process.
With that being said, everything else works just fine. I can use OMA. I can use OWA either HTTP or SSL (forms-based authentication disabled, of course). I can connect without issue from IMAP, or directly via Exchange over VPN, etc...
Urthwhyte said:
I just saw that you also had IMAP open, that's definetly not going to be causing the issue, as I also have that running on my server and have people using it at this very minute. Also, have you tried checking on your device if you go into ActiveSync>Right Softkey>Options and then checking that the boxes besides Contacts, Calendars, Tasks, etc... are checked? I know it's stupid, but I've had issues like that before where I couldn't figure it out for the life of me.
Click to expand...
Click to collapse
I have tried that. I've also tried changing the settings for email from 3 days, to all the other options. It will change the amount of emails ActiveSync "sees", but they still do not download to the phone.

Oh yeah, as far as RPC over HTTP goes, it's one of those "I've always used..." things.
What are the advantages of RPM over HTTP?

I'm not quite sure it's a permissions issue, because as far as I know ActiveSync only uses the standard exchange accounts/services,+ a few virtual directories. What you can try doing is deleting the ActiveSync virtual directory, and then restarting the IIS and Exchange System Attendant services and see if that helps.
RPC over HTTP alleviates the need to have to login to a VPN to check email, it also makes it much easier to configure the client, as they only have to enter their Username+Password and enter the FQDN of the server.

Urthwhyte said:
I'm not quite sure it's a permissions issue, because as far as I know ActiveSync only uses the standard exchange accounts/services,+ a few virtual directories. What you can try doing is deleting the ActiveSync virtual directory, and then restarting the IIS and Exchange System Attendant services and see if that helps.
RPC over HTTP alleviates the need to have to login to a VPN to check email, it also makes it much easier to configure the client, as they only have to enter their Username+Password and enter the FQDN of the server.
Click to expand...
Click to collapse
I deleted the ActiveSync virtual dir (which actually had a much longer name), as well as the OMA virtual dir.
Now I get this message when I try to connect. I guess I need some help on rebuilding it now... heh.
As for RPC over HTTP... brainfart. I knew what it is, but I wanted access to remote shares.
As far as permissions go, I'm pretty sure it's not the problem as well. I just created a brand new user and had the same thing happen.

Flapjack said:
I deleted the ActiveSync virtual dir (which actually had a much longer name), as well as the OMA virtual dir.
Now I get this message when I try to connect. I guess I need some help on rebuilding it now... heh.
As for RPC over HTTP... brainfart. I knew what it is, but I wanted access to remote shares.
As far as permissions go, I'm pretty sure it's not the problem as well. I just created a brand new user and had the same thing happen.
Click to expand...
Click to collapse
Did you try stopping and then starting the Exchange System Attendant and IIS services, the folders should come back automatically. If all else fails, reboot and see if the folders come back.

Urthwhyte said:
Did you try stopping and then starting the Exchange System Attendant and IIS services, the folders should come back automatically. If all else fails, reboot and see if the folders come back.
Click to expand...
Click to collapse
I know that trick, but if there is anything wrong in the metabase, it will not be overwritten.
I'll be using this guide to completely blast out and rebuild all the owa-related folders:
http://support.microsoft.com/kb/883380/en-us

Ok, I rebuilt everything using Method 2 in the above-linked guide.
Now, I'm getting support code 0x85010014
This pages says the cause is SSL being enabled on the main site, but it's definitely not. There are other vdir pages that have SSL enabled, but none of the default MS dirs... only personal ones I created for other things.
http://www.messagingtalk.org/content/479.html

Is there any chance that you have FBA enabled, if you do theres supposed to be some way that you can trick ActiveSync to use a different folder or something. It wasn't really worth it to me, so I just ended up disabling it.

Urthwhyte said:
Is there any chance that you have FBA enabled, if you do theres supposed to be some way that you can trick ActiveSync to use a different folder or something. It wasn't really worth it to me, so I just ended up disabling it.
Click to expand...
Click to collapse
That's the thing. I don't even have a certificate on the site right now. I got rid of the self-issued one, and now I'm waiting on my GoDaddy one. So I don't have FBA enabled. That's why that messages seems so weird...

Hmm, that's odd. I got the same error when I first configure ActiveSync, but now I forget what I did to resolve it. Also, is there any chance you have some sort of IM application, such as Google Talk or AIM? It's a bit easier to resolve these things if you can have a more back and orth communication then a orum post.

Anyone having problems accessing Webmail via Oulook Web Access?

I have seen this same problem covered on forums for the Diamond and also on Opera related sites, but not really seen a solution as yet...
I'm having real problems accessing my company Webmail via Outlook Web Access (OWA) within Opera. Each time I do it, instead of getting the login screen I get a cookie authorisation problem where it tries to download 'CookieAuth.dll' (opening or saving does no good).
Through messing about I managed to get it to work ONCE! When i tried to replicate the scenario (clearing cache/cookies etc) it didn't work again .
I can get it to work through Skyfire, but I'm not entirely happy about using it here as pages are rendered on their servers...
I know some of you will say why don't you set it up to sync via ActiveSync, but I believe work have put some kind of block serverside which prevents me from doing this, so for the moment I'm stuck.
Any suggestions folks?

Had a similar problem myself and it was down to my office server using two versions of web access and one being outdated.
My resolve came from a simple change of web address.
Ask your Network admin if they have an alternative address for access.
Instead of the original owa.xxxx.xxxx I was told to use webmail.xxxx.xxxx for ours.

Farsquidge said:
Had a similar problem myself and it was down to my office server using two versions of web access and one being outdated.
My resolve came from a simple change of web address.
Ask your Network admin if they have an alternative address for access.
Instead of the original owa.xxxx.xxxx I was told to use webmail.xxxx.xxxx for ours.
Click to expand...
Click to collapse
Thanks for your reply Farsquidge. Hmm, yes I'm using a webmail.xxx.com address - I think this is actually due to a problem with Opera, but you say that you can access it okay now?

I use OWA to my work without any issue

Why not just set up active sync instead?
Edit: uhm.. sorry

No problems accessing webmail.xxx.com on my end.

Outlook sync via Outlook Web Access without using web browser?

Hi
I used to be able sync to my work Outlook email via ActiveSync / Outlook Mobile Access (OMA). However, yesterday my work IT department disabled OMA on my Exchange server as they do not support anything other than the blackberry. Despite my protestation they are refusing to re-enable OMA. This leaves me with a big issue!
Does anyone on here know of a third party application that can sync outlook emails and calander using Outlook Web Access (OWA)?
I have found an application called Chronobis which is able to sync from OWA but only one way i.e. deleted items on Chronobis will not delete from my Outlook inbox and calendar appointments added won't sync to my outlook calander (or so I believe). Whilst this is a good start it really doesn't get me to where I need to be.
I am desperate to sync my work outlook emails to my new HTC HD2 (its the main reason I got it)!
Anyone got any other ideas / know of any other applications?
Would really appreciate any suggestions.
Thanks in advance.

Yes, you can use a service called Seven.

Thanks for your response.
I've had a look and it seems this could do the job! Seems that the only way to get it was to join the beta programme which I've done but when I put my the vendor in it doesnt give me the HD2 as an option.
Any ideas what handset I should choose that will work with the HD2?!
I've also read compatibility issues with Manilla 2.5 in their forums. Has anyone managed to get this working successfully on an HD2? Also, are you able to move emails to your different folders using this app and have them sync with the exchange?
Is this the best / only app out there for my requirement?
Sorry for all the qus!
Thanks again.

ActiveSync uses OWA. Put in webmail server, username, password and works.

OWA still works, like afterburn said, i got my calendar, email and tsks to synch. lol now all my contacts are on my university email accounts, pretty cool tho.
no need for thirdparty, active sync does it.
dont know what OMA is. but what you want is exactly what OWA gives you.

dont set your owa using HCT SENSE/MANILA SETTINGS. do it through normal out look ad account way. HTC tick boxes for tasks, calendar and other stuff are greyed out and only email is available.
but on the standard outlook mobile all the settings are there.
need a run through of how to set it up?

Thanks for your responses guys.
OMA is office mobile outlook. It is a setting within the exchange server which either allows or disallows a mobile device to access emails through the mail app. Having OWA does not mean that you will be able to access your emails from a mobile device (except through the mobile browser).
Activesync uses OMA rather than OWA so at the moment I'm stuck!
As a result I need an app that syncs via OWA.
Seven seems to be able to do it but I could do with any answers to my qus above.
Happy to be proved wrong on this but one day it was all working fine and the next my exchage server settings had been changed and it stopped working.
Any exchange server admins on here who can confirm my thinking is correct?

Gooner4_1998 said:
I've also read compatibility issues with Manilla 2.5 in their forums. Has anyone managed to get this working successfully on an HD2?
Click to expand...
Click to collapse
I'm using Seven on HD2. There were compatibility problems with custom ROMs on other devices based on leaked Leo Manila.

Why don't you use Blackberry Connect on your Wm device? That way, you can sync the same way as Blackberry devices. Of course that requires you to have BB access rights, but since they are so BB happy, you may be able to get that.
You can get it here: http://www.htc.com/us/mobile/connect/8925/install/default.html
Of course it is not specific for the HD2, and I have no idea if it'll work, but it is worth a try.

BB connect sounds like a good idea, wasn't aware it was a possibility, thanks.
I actually have a BB from work so I know that I am set up for it. However, I work for a company that are very keen on security so there is no way they will give out the settings I would need (its set up by the IT department and then just given to you).
Is there any way to get the info / settings I need from my current blackberry? Ive had a look on it and can't see anything obvious.

Just checked through some documentation on BB connect and unfortunatley it requires that I install ActiveSync and BB Connect on a computer connected to my works network.
As I dont have admin rights on my work laptop I won't be able to do this (unless anyone knows how to install programs without being an administrator!).
Looks like Seven might be the bset solution!
Vangrieg, which handset did you choose to set up for the HD2?
Thanks

I admin an exchange server, the most common reason for OMA not working is if there isnt a valid ssl cert for the domain, but i can confirm that as you mentioned, it will deffo not work if mobile access is turned off on the user account (there are 2 seperate options for web and mobile access)
i dont see any decent reason why a server admin would disable it, he must be on a power trip or sommert!

Thanks lancemate.
Could the valid ssl cert be the reason even if others in my company are still able to access as before? Its only affecting me. I've set up one of my collegues mail accounts on my phone to see if it still worked and it did without any issues.
When I called IT they said they hadn't changed any of my settings so I had assumed that OMA was the issue. I asked them to check and to re-enable and they told me they were unwilling to even look at my settings!!! Our IT department has been moved to India which makes it even harder to get any help!
Could an ssl cert suddenly just expire?!
Is there anyway of me to get a valid ssl cert for the domain witout going through IT to see if this is the issue?!

Been doing some more research and want to see if getting an ssl certificate onto my phone will make it work. Absoloutely no idea if it will work but its the last thing I can think off!
Is it possible to download the SSL certificate from my OWA site?
If I double click on the padlock in the bottom left corner I can get the certificate details up on the "details" tab (although there are loads of files and I don't know what I'm looking at!). When I click "copy to file" the export wizard come up but I have no idea where to go from there!
Anyone able to offer any assistance please?
Also, I'm sure this is a stupid question but would I need to put this certificate on my phone or could I use a different one?!
Thanks

It cant be an SSL Cerificate issue if your Colleague's account works on your device.
It MUST be that OMA is disabled on your account or something else is horribly wrong. As mentioned above i cant see any reason why an Exchange administrator would disable OMA.
Can you connect to your account using activesync on a different device to check whether its the phone or settings on server side?
To help you with using Blackberry Connect as a possible solution here are some resources on how to run programs that require admin level on machines you havent been given admin rights to. Some methods cover your tracks completely and others simply let you create/amend and delete windows accounts and associated rights in whatever way you need.
i would suggest using the first link to create a bootable usb stick that loads a modified linux command prompt. You can then use this to give yourself local admin rights.
http://pogostick.net/~pnh/ntpasswd/
http://www.jms1.net/nt-unlock.shtml
http://internetbusinessdaily.net/how-to-hack-a-window-xp-admins-password/

I've tried to set up on 2 other phones, bith with no joy so I'm guessing its the server side rather than the phone.
Is there no way that its anything to do with the ssl certificate? Are they set up company rather than by user? Will my suggestion of putting a certificate on my phone definately not work (if I could even find out how to export it from OWA)?!
I also cant see why the OMA would have been diabled so thinking it must be something else!
Thanks

I share Gooner's concerns and look forward to finding a solution. 1) My company has not yet enabled mobile devices to sync via Outlook Web Access. 2) Blackberry Connect does not yet work on HD2. There is a thread for BBC on this very same forum.
I am confident that a solution will soon emerge for 1) and/or 2).

Audio Oblivion said:
It cant be an SSL Cerificate issue if your Colleague's account works on your device.
Click to expand...
Click to collapse
Well, sometimes you need to install the certificate manually on your device to make it work. That's the case where I work - we use a self-signed certificate.

I use zarafa as a direct replacement for exchange, it syncs my emails,calendars, contacts etc.
It allows push email as well.

Hi JMes
After looking around I have found it appears that there are 2 services that will allow you to sync a mobile device using OWA, even if it is not set up for OMA.
Seven - Currently in beta but others have had success with this service on an HD2. I believe that it will sync Calendar, Tasks and Email.
Emoze - Also allows you to check outlook via OWA and offers a free service or a paid for service. Paid for service allows you to remove the "sent from emoze" tag allows attachemnts to be sent up to 2mb (rather than 100kb). Think it costs 10 euros a year.