Help - I have both a Qtek 9090 and a Vodafone V1620 which I use a Jabra BT250V Bluetooth headset with. I have been using all day and then all of a sudden the Bluetooth will disconnect and I can not Longer connect my headset to the PDA.
I have tried a soft reset, unpairing the headset and recreating it but nothing seems to work.
Also I have a collegue who also is having a problem where he can hear the person on the phone but they cannot hear him.
here is the Device information for both devices
Vodafone V1620
Rom Version: 1.31.00 WWE
Rom Date: 12/13/04
Radio Version: 1.12.00
Protocol Version: 1337.42
ExtRom Version: 1.31.175 WWE
Qtek 9090
Rom Version: 1.40.00 WWE
Rom Date: 03/10/05
Radio Version: 1.12.00
Protocol Version: 1337.42
ExtRom Version: 1.40.147 WWE
Does anybody have any ideas if this is the PDA's or the headsets
I just recently bought the Jabra BT250v.
The experience is that it is not as good as the previous model BT250 / BT258.
Everytime after softreset, the connection will disconect even the BT icon (not headset icon) is there.
You then have to disable the bluetooth connection and enable it to get the connection back....(softreset is not required though cause u have already done...)
Hope this help..
Cheers,
Just to clarify, is your device (v1620) a Universal? Isn't it supposed to be the v1640? Here in spain it's called the v1640 but not sure from where you are.
If it is a Universal, pls post your POWER settings when running on Battery.
I have a MDA Pro with a benq-siemens BT headset and am having the same problems. My MDA seems to switch off BT after a call.
my power settings are that the phone shuts off when not used for 3 minutes. Does anybody have a solution?
Related
Thiss is the ROM of my Qtek:
ROM: 1.66.00WWE
DATE: 02/20/04
RADIO: 1.10.00
PROTOCOL: 1337.18
ExtROM: 1.66.130
I am looking for a headset that correctly works and which causes no conflicts with the Emtac Crux BT GPS receiver.
First I was intend to buy a Logitech, but I read on a dutch forum that it doesn't work fine with this ROM-version.
BTW - can I DOWNgrade a ROM ???? I dn't think so...
So, now I thougt to buy a Sony/Ericson HBH-30 or HBH-35 ???
Would this be a lucky combination ????
Hi mvb95,
I use the 172 beta ROM with an Emtac Bluetooth GPS and a Logitech bluetooth headset. No problems at all. I can Navigate using TomTom and call at the same time. TomTom will mute when I'm using the phone and will be unmuted when the phonecall has ended.
This has been working with the 160 ROM also and with an Bluetrek G2 headset and a Nokia HDW2 headset with the same GPS receiver.
The problems on thread on the Dutch site are strange and I can't reproduce them.
Hope this helps your decision.
Wouter
I have recently purchased a Parrot CK3000 and a new MDA compact on T-Mobile.
At first all was fine, but after a couple of days, when you get into the car, the MDA would pair up with the Parrot but then take over the car kit as though a call is in progress. The stereo displays CALL and the music is muted. The only way to reset it is to turn the carkit off and back on again as well as the MDA.
I have hard reset the phone and the problem comes back after a coupld of pair ups.
Does anyone else have this problem, or know of a fix.
I have tested the carkit with a Nokia 6310 and it is fine, so I'm sure the problem is with the MDA compact.
I have :
Rom version 1.12.00 WWE
ROM date : 05/28/05
Radio version : 1.12.00
Protocol : 1337.42
ExtROM: 1.12.152 WWE
I noticed that Radio version 1.13.00 is out, but does this have anything to do with Bluetooth.
Parrot and T-Mobile tech support have had no luck fixing the problem.
Any help greatfully received ?
Thanks
Richard
Hi,
I have excactly the same configuration as you. I have ROM 1.12.01! Which Firmwareversion is your CK3000?
I have 1.13. The only problem with this version is a short heavy noise if i make a call. If your problem still exist after firmwareupgrade of your mda,
try to reset your CK3000 (press green and red button for few seconds)
and pair again.
Regards Yoshi
Thanks, I've just upgraded the MDA compact to Rom V1.13.00 WWE and radio 1.13.
I'll let you know if it fixes it.
HI Friends
I have a very very peculiar problem. I have a O2 Xda Mini purchased recently in Mumbai, India.
My ROM Versions:
ROM VERSION 1.11.00 WWE
ROM DATE 03/15/05
RADIO VERSION 1.12.00
pROTOCOL VERSION 1337.42
eXTrOM vERSION 1.11.922.WWE
Windows Mobile 2003 Second Edition Version 4.21.1088 (Build 15045.2.6.0)
Previously, when i receive a call, I am able to hear/speak without using a bluetooth/Handsfree Kit.
two days back, when i tried using the handsfree, everything worked fine when call was receieved.. After removing the handsfree, I am not able to use the phone without bluetooth/handsfree.
I tried various options for getting the things worked...Did Soft/Hard reset of the phone. still the problem persists.
When I try to go to Start > Settings >Phone and select a Ring Tone, I cant hear the same from the internal speakers.
But when someone calls me the same ringtone works fine ans i hear the tone without any issues.
Do you know if this is a known BUG with this firmware, or there is some corruption in the registry.
Please Help !!!
Thanx in advance ..
Manmohan
Hewlett Packard ..
India.
Hi,
I had similar problem today. I fixed this when I once again plugged handsfree with Magician switched on and then I removed handsfree (still with Magician switched on).
See also this thread:
http://forum.xda-developers.com/viewtopic.php?t=37185
Hi,
I'm running the O2 Exec with an Anycom SBH100, excellent pairing with one HUGE issue.
If the headeset is not paired I'm unable to hear anything in normal phone useage!
Damn that's frustrating, I spent ages getting this to work with my headset and now it wont work without it. :?:
Jasjar ROM 1.30.76WWE
Rom Date 20/02/06 (UK Date)
Radio 1.09.00
Protocol 42.42.P8
ExtRom 1.30.164 WWE
I'm not entirely sure who's A2DP patch I've installed now, to many trial and c*ck up's..
But I do have Zoki A2DP to uninstall.
I hope someone can put me out of my misery here.
When paired with my PC I can simply alter the audio back to the sound card, and it's the same thing I need to do with the PDA, I think.
Alec.
Hi there,
I have an Orange M1000 Pocket PC (also sold as a XDA II or QTEK 2020 etc etc).
It's running Pocket PC 2003 Version 4.20 (Build 13252).
Rom Version: 1.60.00WWE
Rom Date: 12/03/03
Radio Version: 1.10.00
Protocol version: 1337.18
ExtROM version: 1.60.38
I'm trying to get my Globsat BT338 GPS Blue tooth reciever to work with TomTom 5.21(5430).
The thing is I know that my the GPS unit is on COM5. The software utility that it comes with
and installed on the PDA, picks it up on com5 and I can see the Satelite signal strength.
In TT5 under "Other Bluetooth GPS", when configuring, The only Com port the comes up is
COM6. COM5 does not show up. I've also tried TT6 and it has the same problem. I've also
tried choosing "Other NMEA GPS" and manually specifying the baud rate but again only Com 6
comes up.
The thing is, I've also got a QTEK 2020 (supposed to be the same thing!) which works fine
with both TT5 and TT6. On the Qtek the GPS unit comes up under COM5 and it works fine (and
has been working fine for 6 months).
The QTEK is running Pocket PC 2003 Version 4.20 (Build 14053).
Rom Version: 1.72.00WWE
Rom Date: 03/15/04
Radio Version: 1.14.00
Protocol version: 1337.24
ExtROM version: 1.72.125
Don't know why it only comes up on COM6 on the Orange M1000.
I've tried unpairing the devices (on both PDA's) and re-pairing again only on the M1000,
ticking the "outbound COM port: 5" option under "Bluetooth settings". I've sucessfully
paired a Hands free Headset with the M1000 just to make sure that it's blue tooth is
working. Any ideas????
No takers then!
Any suggestions at all from the experts?
Tomtom GPS port problem
spoonfork said:
Any suggestions at all from the experts?
Click to expand...
Click to collapse
I am waiting for an answer on this one too.....
It's been a while since I looked into this for myself. I use TT6 and a TT dongle now.
Try installing Beeline GPS http://www.visualgps.net/BeeLineGPS/
Pair your Bt338 and you should get a signal on beeline. Then set TT as other wired device set your baud rate as in the bt338 guide and choose com 5 (I think). It should then work.
Play around with these settings. It took me some time to get this working but once it was set it worked every time.
For some reason you have to have Beeline on your XDAII for this to work, same settings failed without it installed.
Good luck