Related
These stacks I believe are newer than the Widcomm 1.5.0 series
I think Broadcom reset the version 1.0.0
These are Broadcom 1.0.0.3000 and Broadcom 1.0.0.3500
Build 3500 is slightly unstable but newer.
These came from an i-mate patch for a PDA2K.
DO NOT USE on an i-mate PDA2K (get the orginal unhacked ones from Club i-mate).
I removed files specific to that phone and basically left just the BlueTooth stack.
Recommend a HARD RESET before installing.
I've tested theses patches on a Sprint PPC-6601 (Blue Angle CDMA phone).
Do not do a restore of a backup before or after installing this because it may restore incompatible configuration files that may crash. Build 3100 is more robust against this problem.
Hey Bro
These two are for the Qtek 9090/Xda IIs or Xda II?
I am running 2.20CHS translated with Radio 1.18 and have been unable to get this stack to work. Has anyone tried it?
The ones I posted above are hacked by me to work on the CDMA version (Namely Sprint PPC-6601).
The ones referenced in this reply below are the original patches I started with that came from i-mate club. The offical phone name that the patches are for is "i-mate™ PDA2k" (GSM Slide out keyboard). I don't know how well they would work on the Qtek 9090.
Build 3500 http://www.blueridge.net/dereck/bt/PDA2k_Bluetooth_Fix.CAB
Build 3000 http://www.blueridge.net/dereck/bt/new/OEM_WWE_122_008.sa.CAB
Yes, good link but already bad quality with all bluetooth headset.
It's a shame.
It's a shame you don't give more details.
Which phone, which patch and what happened.
Works great on my phone.
I'm using the 3100 patch from the first post in this thread on a PPC-6601 with a HBH-300. Installed on top of a HARD RESET. That has Build 1.0.0.2200.
It's almost working perfect. Once in a great while if I go out of range for a long time I just toggle bluetooth and it reconnects immediately.
Dial Up Networking and Active Sync all work.
No static. No dropouts. Will go to sleep and wake up and still be connected.
I think that the "shame" was not for you but for imate as their patch don't solve all the issues. Maybe only a bad english ?
Tried on Himalaya_SE 2.06...
I'd merged the files from 2.02 and 2.06 and get a fairly stable handsfree, but I saw your files and got greedy... :twisted:
hmmm, it didn't work though. The installation freeze at splash screen after i cold reset the device.
I believe that there are still device specific entries in the cab files, but it's beyond me at this moment. :?
yes sorry. Just bad english because i am french
This website is wonderfull and a lot of information
But i bought a qtek 9090 (850 euros) and i realize that they sell some device with a lot of bug
Here is my qtek config
qtek9090
Patch fr bt 3000 or 3500 (it's the same : they are bugs both for headset quality)
Windows mobile 2003 SE 4.21.1088 build 14132
rom 1.12.20 FRE
radio rom 1.02.00
ext rom 1.12.146 FRA
Ericson 300 works good but it's too big for me. I am not robocop
But each headset i have tested with bt 3000 and 3500 becomes bad when you stay more than 1 metter from your device. There is scrashesssssssssss in the headset. You have to stay front of the device (in car for exemple) and it works perfectly.
But when i work the pda stay in my bag or other place then quality is horrible
That's why i said it's a shame from imate.
I think there is a defect on this device. I don't know what can i do to increase the audio quality when you stay far from the PDA.
If somebody can help me ????????
But i can see that everybody have the same problem and can't solve it.
Waiting for another ROM. HIHIHIHIHIHIHI they are mad to sell this device like this.
If somebody can find bt 3500 patch from imate in french i am very interested.
Thanks to everybody from xda developer : a great site
yes sorry. Just bad english because i am french
This website is wonderfull and a lot of information
But i bought a qtek 9090 (850 euros) and i realize that they sell some device with a lot of bug
Here is my qtek config
qtek9090
Patch fr bt 3000 or 3500 (it's the same : they are bugs both for headset quality)
Windows mobile 2003 SE 4.21.1088 build 14132
rom 1.12.20 FRE
radio rom 1.02.00
ext rom 1.12.146 FRA
Ericson 300 works good but it's too big for me. I am not robocop
But each headset i have tested with bt 3000 and 3500 becomes bad when you stay more than 1 metter from your device. There is scrashesssssssssss in the headset. You have to stay front of the device (in car for exemple) and it works perfectly.
But when i work the pda stay in my bag or other place then quality is horrible
That's why i said it's a shame from imate.
I think there is a defect on this device. I don't know what can i do to increase the audio quality when you stay far from the PDA.
If somebody can help me ????????
But i can see that everybody have the same problem and can't solve it.
Waiting for another ROM. HIHIHIHIHIHIHI they are mad to sell this device like this.
If somebody can find bt 3500 patch from imate in french i am very interested.
Thanks to everybody from xda developer : a great site
Note that I attached to the first post of this thread Build 3500 release 124 of the i-mate patch stripped down for use on PPC-6601 and VZ6600.
BT problems
Just installed the 3500 fix.
It improves slightly on the Jabra 250, but not enough to actually use it.
It Stabilized the connection between my Holux GR230 GPS and the Qtek 9090.
Hope there will be a better fix.
Try to look at the connection, problem with the Jabra is that it fluktuate from just right to zero every other second.
Nice to pay 800 Euro for something that do not work :shock:
I've added new patches to this the start of this thread.
They work primarily on PPC-6601. Read the attached notes.
Hi mswlogo,
Can you help me if you know which version works on a win2003se translated from chinees on himalaya?
Thanks
That phone is quite different.
I think some other folks are working trying to get this stack working on other phones like yours.
Most of the patches above have registry scripts run in them that will very likely not work on your phone.
The other patches assume you are already running late version BroadComm Stack.
I have HP hx4700 and the Widcomm version is 1.5.0 Build 2000
which one is newest?
That's a really good question.
I'm amazed to see BroadComm on 1.5 instead of WidComm.
What are the dates on the bluetooth files \windows\bt*.*
They are generally around 12/9/2004
It's hard to say what BroadComm and the venders are doing here.
Bluetooth stack on h6315
I just found a new bluetooth stack from:
http://www.ppcw.net/?itemid=2210#cmt9543
Installed on my t-mobile h6315. Device was previously inoperable with bluetooth headset. Device would go into power standby mode, and if bluetooth was running when it went to sleep, it would freeze requiring a soft reset. Now device wakes on power button, with bluetooth running, as it's supposed to. Device also wakes on incoming call, reconnects headset in less than 1 second, and allows me to answer call on the headset buttons. All other headset functions are working as designed, and sound quality seems good. My headset is plantronics 2500. Also, this stack adds a profile in the list for A2DP (??) high quality stereo headphones. Don't have any of these headphones, so don't know if this works on the h6315. Also, don't know if this is the same Broadcom/Widcomm stack you guys have been working with.
Installation is straightforward - put it on the device and tap it. Reset, delete existing device pairings, re-establish the device pairings, and you're ready to test.
All that patch is supposed to do is add two new bt profiles to the pda2k.
* High-Quality Audio support (A2DP)
* Keyboard support (HID)
I'm slightly suprised you got a performance gain out of it.
h6315
It's definately fixed the problems with my device hanging when it goes into standby with bluetooth running and the headset connected.
Now my question is should I install the build 3500 for the 6315 listed above? It appears to be a newer release than this. Any thoughts as to the differences? I'm having a hard time following from the thread as to all the other changes that are in this .cab, and why they are there? Can any one help summarize that?
Hi All,
I seem to be having Bluetooth problems with my dutch t-mobile mda compact:
I am using a simple bluetooth headset - it's got no brand name - but I know it works fine beacuse before getting the mda compact I have used it with my Nokia 6310i and it works fine.
Anyhow, I pair the headset with my mda with no problem and it may work all day long without any problem - but... if for instance I leave the room with my headset - leaving the phone behind - which essentially disconnects the BT headset and the phone - when I come back the phone doesn't recognize the headset no matter what I do. The headset icon on the top of the phone disappears and oesn't come back. I reset the phone, I cliick on the headset answer button, I turn on and off the bluetooth on the phone, I switch on and off the headset - nothing helps!
The only solution that I found working is to delete the headset from the bluetooth devices in the mda and then rediscover the headset which works like a charm. All goes back to normal unitl the next time that it loses connection. I think the phone also sometimes loses connection when I am not using the headset for a long time (and hour or so)...
What can I do?? this is really driving me crazy. I have no problems when using the same headset with my nokia 6310i - but hey, I want to use the MDA!!!
My device: MDA COMPACT - T-Mobile Netherlands
Rom - 1.01.00 WWE
Radio - 1.00.10
Protocol - 1337.36
Ext Rom - 1.01.124 WWE
Thanks you guys for helping me
Ciao,
Lisa
hey Lisa..
i've noticed ur device informations are the following:
My device: MDA COMPACT - T-Mobile Netherlands
Rom - 1.01.00 WWE
Radio - 1.00.10
Protocol - 1337.36
Ext Rom - 1.01.124 WWE
they are too old :wink:
I have not experienced a problem like urs before,but i recommend u to upgrade ur device(the latest ROM version is 1.12.00,as much as i know :wink: ),u can find it in the ftp server,wich u can access from the wiki page(top left of ur page)...
if ur new to PDAs,then u have to know that ur device is a Magician,so search the ftp in the Magician folder :wink:
if u don't know how to upgrade ur device,u just have to ask,i will guide ur to the steps with pleasure
hope i've helped...
RAGO :lol:
Thanks Rago.
I was kind of wondering which one of the ROMs I should pick? When logging on to the FTP directory - there are lot's of shipped Magician Roms... Many show 112 - but which one should I take?
Is there any issue with the new Roms? Bluetooth problems?
Regards,
Lisa
hi lisa
best available workaround is to buy zenduris pocket zenphone software (do a search here at xda-developers). this program enables the headset profile permanently so your mda will be able to re-connect with your headset again, when you are back in the room.
cheers, lutz
Hi Lutz,
Thanks again for helping me
So you are using the word "workaround" - is this a known problem or it this just a problem with my device?
Am I to assume that there is a problem with the BT can can only be worked around and not solved permanently?
Does any of the new Roms solve this?
Bye,
Lisa
hi lisa
well there may be a rom that acts different but i won't force you to flash your device certain times with all the risks just to find out that it doesn't work! zenduris pocket zenphone really fixes the issue permanently and is definitely the best way to do it. i myself use the german o2 xda mini rom and it works well with my parrot ck3100 and reconnects with it the way it should while all the other (german) rom versions did not. but i guess you won't flash your device with a german rom, right...
cheers, lutz
I have recently purchased a Parrot CK3000 and a new MDA compact on T-Mobile.
At first all was fine, but after a couple of days, when you get into the car, the MDA would pair up with the Parrot but then take over the car kit as though a call is in progress. The stereo displays CALL and the music is muted. The only way to reset it is to turn the carkit off and back on again as well as the MDA.
I have hard reset the phone and the problem comes back after a coupld of pair ups.
Does anyone else have this problem, or know of a fix.
I have tested the carkit with a Nokia 6310 and it is fine, so I'm sure the problem is with the MDA compact.
I have :
Rom version 1.12.00 WWE
ROM date : 05/28/05
Radio version : 1.12.00
Protocol : 1337.42
ExtROM: 1.12.152 WWE
I noticed that Radio version 1.13.00 is out, but does this have anything to do with Bluetooth.
Parrot and T-Mobile tech support have had no luck fixing the problem.
Any help greatfully received ?
Thanks
Richard
Hi,
I have excactly the same configuration as you. I have ROM 1.12.01! Which Firmwareversion is your CK3000?
I have 1.13. The only problem with this version is a short heavy noise if i make a call. If your problem still exist after firmwareupgrade of your mda,
try to reset your CK3000 (press green and red button for few seconds)
and pair again.
Regards Yoshi
Thanks, I've just upgraded the MDA compact to Rom V1.13.00 WWE and radio 1.13.
I'll let you know if it fixes it.
Hi,
Is it possible to have bluetooth running without the radio (phone part) working? Whenever I try to turn on bluetooth it insists on me turning on the phone part also.
Is there a way to turn off the phone part without switching the device to flight mode?
Thanks alot.
hi borgs.. i hv no problem at all for getting my BT on while my phone is totally switch off.. im using 02 mini too.. no problem at all
spin_x said:
hi borgs.. i hv no problem at all for getting my BT on while my phone is totally switch off.. im using 02 mini too.. no problem at all
Click to expand...
Click to collapse
It depends on yr rom version. On newer rom version, switching off radio will switch off BT.
U can try PhoneAlarm from www.pocketmax.net. It lets U turn off the radio without affecting the BT
Thanks alot for the info.
My ROM versions are:
Qtek S110
Rom: 1.12.00 WWE (05/28/05)
Radio: 1.12.00
Protocol: 1337.42
ExtRom: 1.12.119 WWE
It looks like my ROM version is different to the information in the manual I have as, in the manual, it states that the phone can be turned off by holding the power button. On my machine, this turns off the backlight only, even if I hold it down for more than 5 seconds.
I wonder why the newer ROM versions don't allow bluetooth to be on without the phone. My reason for wanting this is I intend to use the device with a bluetooth GPS whilst hiking and, if I'm not near a mobile transmitter, this will run down my device much quicker.
I'll give the trial version of that software a try.
Thank you.
the developer maybe was in unclear state for this new version,haha
jackleung said:
spin_x said:
hi borgs.. i hv no problem at all for getting my BT on while my phone is totally switch off.. im using 02 mini too.. no problem at all
Click to expand...
Click to collapse
It depends on yr rom version. On newer rom version, switching off radio will switch off BT.
U can try PhoneAlarm from www.pocketmax.net. It lets U turn off the radio without affecting the BT
Click to expand...
Click to collapse
Thanks for the info. I gave PhoneAlarm a try, unfortunately it doesn't seem to work. I set a profile that had the radio off but the bluetooth on but when I switch to the profile but I cannot get it to work. It seems that on my ROM version the radio has to be on for bluetooth to be on - which to be honest is just sheer dumb.
Can you please tell me which versions of the ROM components I need and where I can get them please? I have a Qtek S110 UK - doesn't seem to have any phone network configuration on it.
Thanks
Here's a reply I just got from Qtek:
Hi Steve,
you are cotrrect - the Bluetooth works independently from the phone. please go back to your point of sale and raise this issue with them, the return is their responsibility. Kind regards, Robin
-----Original Message-----
From: Steve
Sent: 06 January 2006 08:47
To: QtekUK
Subject: Enquiry from QtekUK
Hi,
I recently purchased a Qtek S110. I am finding that the device will not allow me to have bluetooth on when the radio (phone part) is not on. This is no good for me as I intend to use the device with a bluetooth GPS whilst out hiking. If the radio stays on then my battery will drain really fast as I will be nowhere near a phone transmitter and it will be using large amounts of power to communicate with one.
Other people tell me that their Qtek S110 allows them to have bluetooth on when the radio isn't on. To be honest this is how the phone should work, bluetooth should have nothing to do with the radio part, and I am very surprised that mine doesn't that way.
My firmware is:
ROM: 1.12.00 WWE, Radio 1.12.00, Protocol 1337.42, ExtrROM 1.12.119 WWE
If this can be fixed with a new firmware then please tell me how I do this and where I find them as I can find no mention of firmwares on any Qtek site. Otherwise is there any other way of having bluetooth only on?
Thank you,
Regards,
Steve
-----
So, they want me to send it back to my supplier but to be honest, I don't actually think its faulty - just a faulty ROM. I can now see a struggle between me and the supplier. Any ideas?
Cheers,
Steve
Ok, thanks to jackleung and kta I have now managed to get Phone Alarm to have bluetooth on and GSM off. I guess, either I was using an older version, or I wasn't quite doing it right.
But I can now confirm it to work. Seems like Qtek don't know what they're talking about or at least some firmwares may do it when others don't.
But the good news is that I don't have the hassle of returning the machine or risking flashing the firmware. £10 for the new software is far easier.
Thanks again.
There is a registry hack in this thread that sorted the problem for me and my Alpine, although the hack was currently posted in the Magician forum.
Cheerio !
Hi All
Found a lot of wonderful stuff here, but still stuck.
Can an O2 XDA Mini S be 'flashed' to support A2DP? I want to
use mine with a set of Motorola S9 Bluetooth stereo headphones
and MP3 player software
I have tried a number of ROMs (TNT 4.0, etc) but it still I only get a
'hands free' check box not a 'bluetooth stereo' or the like box
I have ROM version 2.21.4.1.WWE
Protocal Version 413.1.03
ExtROM Ver 2.21.4.101
Any help for a poor newbie would be great
Thanks in advance.
I use Vanilla by NotTooSmart, and A2DP works fine with this ROM.
If You cant find it on the net, please let me know via PM, and I will upload it somewhere for You.
Hi
Thanks for the reply - I have got a bit further.
It appears my unit may be CID locked, so I have been using batch
tool and pdocwrite and that seems to work.
I have tried Titan V2.0, TNT4.0 and SeeNoEvil all of which give me WM6/
A2DP, however all of them stop my 'Contacts' from working. When I tap
'Contacts', it flashes up and closes again - any ideas? Do I need pocket
outlook installed?
JayDee
Are you saying that if your Wizzard is CID Locket you will not get the A2DP module to work?
I have a G4 and use ShellTolls to flash it.
I am just about to purchase an BT Headset.
Please reply and let me know if there will be any problems.
Cheers,
Slawek