Database Users

Bluesoleil BT stack + manager, stable and more profiles

I found out about this BT stack driver through a thread regarding the toshiba BT stack driver, so i thought: other driver, other thread :wink:
Original thread here: http://forum.xda-developers.com/viewtopic.php?t=15604
Download BlueSoleil CE here: http://ivtcorporation.com/download/BlueSoleil_Download.php#bluesoleilforce
Credits for finding this BT stack go to: rdkay
It has a lot more profiles then the standard MS stack.
Occording to their web site, supported profiles are:
PAN, OPP, SYNC, LAP, DUN, FTP, FAX, HID, SPP, HCRP, BIP, Headset, AV
The manager that comes along with it, is also a lot better then the standard one, more options, more playing around
I played around with it for a while, and i think it is rock sollid. Although I have only tested the SPP profile (with BT GPS). It never crashed, not even on suspend & resume. The radio will be deactivated during suspend though. For me this is perfect, because it will save battery life.
On resume, it will be automatically reactivated.
Installation procedure:
- Download Bluesoleil CE: http://www.bluesoleil.com/update/index.asp
- Before install, delete these reg keys:
[HKEY_LOCAL_MACHINE\Services\BTIcon]
[HKEY_LOCAL_MACHINE\SOFTWARE\microsoft\bluetooth]
- Reboot PPC
- Install Bluesoleil CE
- During setup on PPC select Manual -> USB driver, then let setup reboot
This next step is optional, do this only when you have troubles with your GPRS connection (a newly installed network driver prevents it from operating properly on my device) Delete following reg keys:
[HKEY_LOCAL_MACHINE\Comm\BTNIC]
[HKEY_LOCAL_MACHINE\Comm\BTNIC1]
Reboot once more
Finished! enjoy

Sorry to spoil the celebrations, but I have already tried this stack. Indeed it works fine - except for the dirty details mentioned on the download page:
"Note: If your Bluetooth Hardware device (such as USB Dongle) is not licensed by IVT for using with BlueSoleil, any BlueSoleil version downloaded here can only be used as evaluation version, only 5M data can be transfered through Bluetooth link in evaluation version."
Unfortunately this is true - it shuts down the connection after transfer of 5Mb and after some time (a couple of weeks?) it no longer functions at all. I would be happy to buy the full version of this Bluetooth stack for my MDA Compact, but sadly the company does not seem willing to sell it.

Heimiko said:
I found out about this BT stack driver through a thread regarding the toshiba BT stack driver, so i thought: other driver, other thread :wink:
(...)
Finished! enjoy
Click to expand...
Click to collapse
WOW :lol:
is this the solution i've been looking for, for my Parrot CK3000 carkit?
Just 3 questions before i will try this one tonight:
- Is it un-installable? (cause you change the regkeys)
- You had no problems with ActiveSync? Cause i would really feel bad loosing that!
- If it works on the Magican, it should also work on my dutch MDA Compact (T-Mobile, but ROM upgraded to 1.06, radio 1.05) right?
Thomas

lars_juhl said:
Sorry to spoil the celebrations, (...)
Click to expand...
Click to collapse
I want a crack crack crack!!!???
anybody?
(If they are not willing to sell it...)

lars_juhl said:
Sorry to spoil the celebrations, but I have already tried this stack. Indeed it works fine - except for the dirty details mentioned on the download page:
"Note: If your Bluetooth Hardware device (such as USB Dongle) is not licensed by IVT for using with BlueSoleil, any BlueSoleil version downloaded here can only be used as evaluation version, only 5M data can be transfered through Bluetooth link in evaluation version."
Unfortunately this is true - it shuts down the connection after transfer of 5Mb and after some time (a couple of weeks?) it no longer functions at all. I would be happy to buy the full version of this Bluetooth stack for my MDA Compact, but sadly the company does not seem willing to sell it.
Click to expand...
Click to collapse
aaaahjjj, bummer!! Have you tried emailing the company, asking if you could buy it from them? As far as it seems now, this stack is working perfectly, and I am REALY happy if I could buy it from them........

wroet said:
Just 3 questions before i will try this one tonight:
- Is it un-installable? (cause you change the regkeys)
- You had no problems with ActiveSync? Cause i would really feel bad loosing that!
- If it works on the Magican, it should also work on my dutch MDA Compact (T-Mobile, but ROM upgraded to 1.06, radio 1.05) right?
Thomas
Click to expand...
Click to collapse
- You should make a backup of the reg keys you delete, only then it will be reversible.
- No problems with activesync of any kind.
- I have radio version 1.05 myself, so for that it should work. For ROM however, I have version 1.03, since too many ppl were complaining about bugs & instability.
--------
Also, I have written an email to their company, asking if they would sell it, and howmuch it would cost. Lets see if we'd get some awnser. I could live with a 60 days limit (i would reinstall my PPC long before that), but a 5 meg limit....... :?

So, which devices are licensed?

Found a configuration file, so we can do some additional tinkering :wink:
File: \Windows\bttl.ini

The following file has obviously to do with the license for application.
I suspect, that if we might be successfull with tickering in this file, we might get a full blown version. But lets first wait if I get awnsers from the company if they'd sell it; I prefer a legal version.
License File: \Windows\IVTLicConf.dat
Also, an additional ini file, that appears to be the same (?) as my first reported bttl.ini : \Windows\BTDynamicConfig.ini

for me it is working perfect. thx a lot heimiko.

Anybody tried this stuck with BT headsets...?...I would like to know if it works with SE HBH-660 or some other BT headset supporting Caller ID...
Regards,
Primoz

with the parrot ck3300 it works just perfect...

xlephant said:
with the parrot ck3300 it works just perfect...
Click to expand...
Click to collapse
Xlephant: I was really looking for a good stack for my ck3000 also! Can you tell me if it allows me to upload the phone numbers to my carkit also and use the voicedialing app inside the ck3000? (Cause with my old Sony Ericsson T610 I could)
:shock:
Thomas

don't know much about the ck3000. but i have no problems to upload the phonebook with this stack. but i was also be able to upload it with the ms stack(the ck3300 works perfect with the ms stack). i swaped the stack only because of the PAN profil.

I don't understand what everyone is getting excited about. If you cannot buy it, then it is useless to me.
Regards,
William

thats true but i think there should be a way to buy it or to reset the 5mb limit.

Hello,
Does this stack allow voice dialing with a bluetooth headset ?
Thanks in advance...

Largo_Winzclav said:
Hello,
Does this stack allow voice dialing with a bluetooth headset ?
Thanks in advance...
Click to expand...
Click to collapse
It should, provided you have a dialer app that does. And as the bluetooth is switched off in standby you would have to initiate the dial-up from the device, not from the headset.

Radio issue
What do you mean by the radio will be deactivated during suspend? The Bluetooth radio or won't I be able to recieve any incomming calls on my MDA Compact?
Has anyone actually experienced any of the mentioned limitations, i.e. 5 MB limit, etc.?
Cheers for the reply!

I should try it

Qtek S110 - bluetooth without phone radio on?

Hi,
Is it possible to have bluetooth running without the radio (phone part) working? Whenever I try to turn on bluetooth it insists on me turning on the phone part also.
Is there a way to turn off the phone part without switching the device to flight mode?
Thanks alot.

hi borgs.. i hv no problem at all for getting my BT on while my phone is totally switch off.. im using 02 mini too.. no problem at all

spin_x said:
hi borgs.. i hv no problem at all for getting my BT on while my phone is totally switch off.. im using 02 mini too.. no problem at all
Click to expand...
Click to collapse
It depends on yr rom version. On newer rom version, switching off radio will switch off BT.
U can try PhoneAlarm from www.pocketmax.net. It lets U turn off the radio without affecting the BT

Thanks alot for the info.
My ROM versions are:
Qtek S110
Rom: 1.12.00 WWE (05/28/05)
Radio: 1.12.00
Protocol: 1337.42
ExtRom: 1.12.119 WWE
It looks like my ROM version is different to the information in the manual I have as, in the manual, it states that the phone can be turned off by holding the power button. On my machine, this turns off the backlight only, even if I hold it down for more than 5 seconds.
I wonder why the newer ROM versions don't allow bluetooth to be on without the phone. My reason for wanting this is I intend to use the device with a bluetooth GPS whilst hiking and, if I'm not near a mobile transmitter, this will run down my device much quicker.
I'll give the trial version of that software a try.
Thank you.

the developer maybe was in unclear state for this new version,haha

jackleung said:
spin_x said:
hi borgs.. i hv no problem at all for getting my BT on while my phone is totally switch off.. im using 02 mini too.. no problem at all
Click to expand...
Click to collapse
It depends on yr rom version. On newer rom version, switching off radio will switch off BT.
U can try PhoneAlarm from www.pocketmax.net. It lets U turn off the radio without affecting the BT
Click to expand...
Click to collapse
Thanks for the info. I gave PhoneAlarm a try, unfortunately it doesn't seem to work. I set a profile that had the radio off but the bluetooth on but when I switch to the profile but I cannot get it to work. It seems that on my ROM version the radio has to be on for bluetooth to be on - which to be honest is just sheer dumb.
Can you please tell me which versions of the ROM components I need and where I can get them please? I have a Qtek S110 UK - doesn't seem to have any phone network configuration on it.
Thanks

Here's a reply I just got from Qtek:
Hi Steve,
you are cotrrect - the Bluetooth works independently from the phone. please go back to your point of sale and raise this issue with them, the return is their responsibility. Kind regards, Robin
-----Original Message-----
From: Steve
Sent: 06 January 2006 08:47
To: QtekUK
Subject: Enquiry from QtekUK
Hi,
I recently purchased a Qtek S110. I am finding that the device will not allow me to have bluetooth on when the radio (phone part) is not on. This is no good for me as I intend to use the device with a bluetooth GPS whilst out hiking. If the radio stays on then my battery will drain really fast as I will be nowhere near a phone transmitter and it will be using large amounts of power to communicate with one.
Other people tell me that their Qtek S110 allows them to have bluetooth on when the radio isn't on. To be honest this is how the phone should work, bluetooth should have nothing to do with the radio part, and I am very surprised that mine doesn't that way.
My firmware is:
ROM: 1.12.00 WWE, Radio 1.12.00, Protocol 1337.42, ExtrROM 1.12.119 WWE
If this can be fixed with a new firmware then please tell me how I do this and where I find them as I can find no mention of firmwares on any Qtek site. Otherwise is there any other way of having bluetooth only on?
Thank you,
Regards,
Steve
-----
So, they want me to send it back to my supplier but to be honest, I don't actually think its faulty - just a faulty ROM. I can now see a struggle between me and the supplier. Any ideas?
Cheers,
Steve

Ok, thanks to jackleung and kta I have now managed to get Phone Alarm to have bluetooth on and GSM off. I guess, either I was using an older version, or I wasn't quite doing it right.
But I can now confirm it to work. Seems like Qtek don't know what they're talking about or at least some firmwares may do it when others don't.
But the good news is that I don't have the hassle of returning the machine or risking flashing the firmware. £10 for the new software is far easier.
Thanks again.

There is a registry hack in this thread that sorted the problem for me and my Alpine, although the hack was currently posted in the Magician forum.
Cheerio !

K-JAM_WWE_216901_2169101_020710_ship A2DP enable?

Has anyone yet worked out if it is possible to enable A2DP in the new I-Mate ROM?
It has been suggested that comparing differences in the registry between the "test" rom and the "ship" rom may shed some light on this. Can any qtek "test" rom users help with this?
Another suggestion is to post the extended_rom from the qtek "test" rom. It may be possible to install the AKU2 update cab from this to overwrite the current settings. Anyone got the extended_rom from the qtek "test" rom which they can post?
TIA.

Is this a dumb question? Can anybody tell me whether the A2DP has been removed or disabled from the latest i-mate rom?
Cheers,
Shamus

removed...if u want u can try Q Tek ROM

Thanks for the reply...isn't the qtek AKU2 rom buggy? I have read many reports of lock-ups from people using this rom.
I am not sure if it is possible to downgrade from the new i-mate rom as it has re-enabled the cid lock. AWizard and lockwiz don't work with this new rom. Anyone managed to downgrade from the new i-mate rom?
Cheers,
Shamus.

Shamus69 said:
Thanks for the reply...isn't the qtek AKU2 rom buggy? I have read many reports of lock-ups from people using this rom.
I am not sure if it is possible to downgrade from the new i-mate rom as it has re-enabled the cid lock. AWizard and lockwiz don't work with this new rom. Anyone managed to downgrade from the new i-mate rom?
Cheers,
Shamus.
Click to expand...
Click to collapse
aWizard works with the iMate ROM if you just want to unlock CID. It is not able to change the 2nd splash screen. I just used aWizard to unlock CID on my Qtek 9100 to replace the latest iMate ROM with the Qtek test ROM with A2DP.
Just got this new Bluetooth stereo headset yesterday, which comes with a BT transmitter for attaching to my iPod, and it's working great with the 9100. I am one happy fellow! :lol:

rnuqui said:
Just got this new Bluetooth stereo headset yesterday, which comes with a BT transmitter for attaching to my iPod, and it's working great with the 9100. I am one happy fellow! :lol:
Click to expand...
Click to collapse
Do you hear any strange sounds while listening BT-stereo from your Qtek? I've read a few posts where people complain about some sort of whine noise that can easy be heard during pauses between songs... They say it's a Wizard hardware problem - the reason why HTC disabled A2DP in the final AKU2 firmware.

i had no whining problems with the test rom using a2dp, however what did happen every so often was the pitch would change for a few seconds, i asumed it was due to the cache, from what i had heard the a2dp creates a virtual music memory to transfer at its own speed.

i'm using it with my iphono mini 450 headphones.
no pitch problems or whine?noise. ( do you realy mean whine or white?)
I do hear a very slight hiss, but that must be the headphones cos i also hear that when its not connected. Probably radionoise.
For me the rom is also running stable so i don't understand why they took it out of the rom
The only problem i have is when i wear my phone in my pocket the sound sometimes stutters when i turn my head or place an arm in between etc.
But thats probably due to the fact that the headphones are 10meter class

TyTN +BT-handsfree, Nokia BH801

Hi, I have a question if anyone here has tried to get the TyTN and Nokia´s new BT-handsfree BH801 to work?
TyTN finds and connects to the BH801, but they dont seem to work.
It all seems to work correct, activationcode is filled in, use as hansfree is activated.
Anyone got a solution??
Thanx!

By the way, NOKIA support says that the BH-801 only supports;
Bluetooth 2.0, 1.2 and 1.1 specification,
Handsfree 1.5 (HFP) and headset 1.1 (HSP) profiles.

Erik_S said:
Hi, I have a question if anyone here has tried to get the TyTN and Nokia´s new BT-handsfree BH801 to work?
TyTN finds and connects to the BH801, but they dont seem to work.
It all seems to work correct, activationcode is filled in, use as hansfree is activated.
Anyone got a solution??
Thanx!
Click to expand...
Click to collapse
I could not give you an answer to your problem, but can only let you that the Nokia HS-12W works great on the new AKU 3.3 ROM's. I have the WWE version on my TyTN and the only change I had to make was to activate the stereo setting in the A2DP registry.
Previously I had great deal of problems getting the same headset to work on the SA ROM 1.35. Bitpool changes in the registry as well as Sleuths A2DP fix were necessary.
By the way I have also had amazing results with the HTC BH S100 Bluetooth stereo headset. The great thing about this device is that it allows the user the option to use their own favourite 3.5mm headset.
Regards

Hi, and thanks for your reply.
It´s seems a bit tricky to get it working, fiddeling in the program isnt something as I would prefer getting in to, as I´m a noob!
But can anyone see if the profiles that NOKIA demands is supported in TyTN?
And if so, how can I get there??
By the way, I have a swedish TyTN with following setup;
ROM-version: 1.18.263.2
ROM-datum: 07/22/06
Radioversion: 1.07.01.10
Protokollversion: 32.40.7010.02H
ExtROM-version: 1.18.263.104
Thanks!

O2 XDA Mini S and A2DP

Hi All
Found a lot of wonderful stuff here, but still stuck.
Can an O2 XDA Mini S be 'flashed' to support A2DP? I want to
use mine with a set of Motorola S9 Bluetooth stereo headphones
and MP3 player software
I have tried a number of ROMs (TNT 4.0, etc) but it still I only get a
'hands free' check box not a 'bluetooth stereo' or the like box
I have ROM version 2.21.4.1.WWE
Protocal Version 413.1.03
ExtROM Ver 2.21.4.101
Any help for a poor newbie would be great
Thanks in advance.

I use Vanilla by NotTooSmart, and A2DP works fine with this ROM.
If You cant find it on the net, please let me know via PM, and I will upload it somewhere for You.

Hi
Thanks for the reply - I have got a bit further.
It appears my unit may be CID locked, so I have been using batch
tool and pdocwrite and that seems to work.
I have tried Titan V2.0, TNT4.0 and SeeNoEvil all of which give me WM6/
A2DP, however all of them stop my 'Contacts' from working. When I tap
'Contacts', it flashes up and closes again - any ideas? Do I need pocket
outlook installed?
JayDee

Are you saying that if your Wizzard is CID Locket you will not get the A2DP module to work?
I have a G4 and use ShellTolls to flash it.
I am just about to purchase an BT Headset.
Please reply and let me know if there will be any problems.
Cheers,
Slawek