Hi, I have a question if anyone here has tried to get the TyTN and Nokia´s new BT-handsfree BH801 to work?
TyTN finds and connects to the BH801, but they dont seem to work.
It all seems to work correct, activationcode is filled in, use as hansfree is activated.
Anyone got a solution??
Thanx!
By the way, NOKIA support says that the BH-801 only supports;
Bluetooth 2.0, 1.2 and 1.1 specification,
Handsfree 1.5 (HFP) and headset 1.1 (HSP) profiles.
Erik_S said:
Hi, I have a question if anyone here has tried to get the TyTN and Nokia´s new BT-handsfree BH801 to work?
TyTN finds and connects to the BH801, but they dont seem to work.
It all seems to work correct, activationcode is filled in, use as hansfree is activated.
Anyone got a solution??
Thanx!
Click to expand...
Click to collapse
I could not give you an answer to your problem, but can only let you that the Nokia HS-12W works great on the new AKU 3.3 ROM's. I have the WWE version on my TyTN and the only change I had to make was to activate the stereo setting in the A2DP registry.
Previously I had great deal of problems getting the same headset to work on the SA ROM 1.35. Bitpool changes in the registry as well as Sleuths A2DP fix were necessary.
By the way I have also had amazing results with the HTC BH S100 Bluetooth stereo headset. The great thing about this device is that it allows the user the option to use their own favourite 3.5mm headset.
Regards
Hi, and thanks for your reply.
It´s seems a bit tricky to get it working, fiddeling in the program isnt something as I would prefer getting in to, as I´m a noob!
But can anyone see if the profiles that NOKIA demands is supported in TyTN?
And if so, how can I get there??
By the way, I have a swedish TyTN with following setup;
ROM-version: 1.18.263.2
ROM-datum: 07/22/06
Radioversion: 1.07.01.10
Protokollversion: 32.40.7010.02H
ExtROM-version: 1.18.263.104
Thanks!
Related
Hi, i'm looking for a way to connect my Nokia 6230 to my Wizard so that the Wizard is recognized by the Nokia as headset. Does anyone know if this is possible?
I've been looking at the widcom/broadcom stack but i couldn't get it to work yet. Insufficient memory error.
Does anyone know if this is somehow possible?
I dont think this works. However I have done the reverse using my Laptop. I used my laptop to take calls and answer them, while my PDA is in the other room! w00t
And do you think it would be possible if we get the broadcom/widcom stack running on the Wizard?
No. I dont think that has the correct services/profiles. And is it possible to get the widcomm stack on the Wizard? Doesn't it already have the microsoft stack on it?
Thanks
how did u answer the calls on your lap top??? thats awesome wanna share? thank you!
my email address is [email protected]
To be a "headset" for another device, you need the "Audio Gateway" profile.
Most desktop adapters support this profile (the Widcom stack does), so your desktop or laptop PC can be a headset for your phone. I've used this as a speakerphone when we were doing something in a class. It's pretty slick.
The Wizard does NOT have the Audio Gateway profile, so it cannot be the speakers or mic for another device.
However, SOME of the Ipaq PDA's can do this. I've done it with a Bluetooth-Equipped Ipaq, so I know that, at least in theory, it IS possible.
TomXP411 thanks. You basically explained it for beckhams777...
PDAs that are not a phone themselves are usually the ones that have this profile. If you find a device that has this profile AND uses the Widcomm stack, I may be able to extract this profile and use it on other devices also. It also depends on what version of widcomm stack they use... But, it could well be possible now that I know some other devices can do it
Thanks
I'll go searching 8)
got it! thanks anyways!
T-mobile MDA (USA version) and Bt
Ok, read all the posts, so there isn't a way to use my bt earbud with music on my MDA?
it worls great for phone, but MDA does NOT have audio gateway software
Al
When I pair with my Mac (OS X 10.4), the mac does discover bluetooth audio as a service on the wizard... however when i try to send sound, OS X states that it could not connect to the BT Audio device... So in theory it should be possible, if the service is discovered. We perhaps just need an app on the wizard that responds to the connection request...
Just fyi, I am using the test rom on my Kjam for a2dp, but I just followed the instructions here http://forum.xda-developers.com/viewtopic.php?t=48502 for my Jamin and it worked flawlessly. Others are reporting it works for the Wizard too!
thanks for the fyi, i may try this later on
Brilliant! Great sound quality! very easy install on Wizard
techspy said:
Just fyi, I am using the test rom on my Kjam for a2dp, but I just followed the instructions here http://forum.xda-developers.com/viewtopic.php?t=48502 for my Jamin and it worked flawlessly. Others are reporting it works for the Wizard too!
Click to expand...
Click to collapse
How is the sound quality as compared to the test rom version? The testrom a2dp wasn't very good at all. I am really hoping this fixes it!
Now I will buy the Bluetooth Stereo Headset.
Works for my xda mini s and will try to my xda exec
FANTASTIC, thanks for pointing this out.
I have installed thgis on my AKU2 K-JAM and all is working nicely.
I can now use my Bluetake BT450rx headphones that i bought myself for Christmas that have been gathering dust on a shelf
so does this mean i can use the latest rom update now and then install this ontop of it?
I have been using the test rom for a long time because fo the a2dp
Well....I did follow the steps...but I do not have an A2DP headset......and I want to be sure this software really works on my T-mobile MDA, before I but an A2DP headset, is anyway I can know this software works with out having an A2DP headset?
I just have the MOTO H700 and HS820....but, I guess it won't work as A2DP headset...
What you guys recommend for A2DP headset for listen to music?
contaygious said:
so does this mean i can use the latest rom update now and then install this ontop of it?
I have been using the test rom for a long time because fo the a2dp
Click to expand...
Click to collapse
I reckon its pretty good.
I am actually finding the A2DP Audio has better reception than the standard handsfree profile as with the new Wireless Audio option enabled with my Bluetake BT450rx headphones i can put the k-jam in any pocket or even walk over 5 metres away without it skipping a beat.
However the handsfree profile on the Bluetake headphones gets really crackly if put the k-jam my pocket and cannot walk more than 2 metres away.
Overall i'm really impressed although i have read that having push email and a2dp enabled at the same time can cause problems so im about to give that a go now
Cheers
is RUU_Prodigy_2170702_21707102_20710_QTEK_WWE_Ship.exe the right rom for this addon?
contaygious said:
is RUU_Prodigy_2170702_21707102_20710_QTEK_WWE_Ship.exe the right rom for this addon?
Click to expand...
Click to collapse
This should work on any of the AKU2.0 ROMS with version 2.x so that should be fine.
is the version i just asked about the latest one?
I'm pretty sure that the newest qtek wwe (english) rom.
I have an i-mate and use the i-mate rom so not completely sure but from looking at the ftp site here it seems to be so.
This works with older roms too I am using the older Tmobile UK rom that works with blackberry connect software and it works perfectly
A2DP w/2.17 ROM from Summiter.
Went to Tornado Group downloaded Bluetooth files files installed them, tweaked the registry and I am running the newest ROM with A2DP. Thanks summiter for the ROM and the Tornado folks for the files.
http://forum.xda-developers.com/viewtopic.php?t=48491
Eureka.
PS Not the 2.8 but 2.17.
All I can say is...WAHOO!
I've been searching every forum I could find looking for A2DP for my MDA. Followed the instructions and it works great with my Plantronics 590A.
I'm using the latest T-Mobile US release ROM from the FTP site (with the goodies rolled in).
Tip:
If you lose the Bluetooth stereo output (like if you turn off the headset and then back on), go to the Bluetooth device section, hold click on the headset, and finally choose "Set as Wireless Stereo".
THANK YOU!
Now...if I could only get the headset controls to next/prev track and pause / play...
sting0r said:
This works with older roms too I am using the older Tmobile UK rom that works with blackberry connect software and it works perfectly
Click to expand...
Click to collapse
Are you sure? Can anybody else confirm this?
If you are a Cingular user, I just uploaded a 2.17 ROM that has A2DP added. Link is posted in the Wizard upgrading forum.
DO NOT TRY THIS AT HOME!
I try to make single-file cab installation, can somebody of the pros please take a look at it? I also don't know how to insert soft reset feature
Puckster said:
contaygious said:
Overall i'm really impressed although i have read that having push email and a2dp enabled at the same time can cause problems so im about to give that a go now
Cheers
Click to expand...
Click to collapse
@Puckster: Where did u read that? I am really curious whether it works together - if not, A2DP is kind of useless for me...
Any experiences so far?
Click to expand...
Click to collapse
Anyone know why the Cingular 8525 doesn't currently support the Nokia BH800 bluetooth headset, and when there may be a software update that will fix this?
Is this a problem with all versions of this phone, or just the Cingular one?
i also have the Nokia BH800 (cute headset) and it doesnt wrk properly with my jasjam. The mic is really low, sound is really low, doesnt support handsfree profile (only headset). It is quite strange because on my wife's nokia n73 it works like a charm with all the profiles and redirects all sound to it, even with tomtom nav 6 on her mobile.
Dont know how to help you as I am in the same boat. anyone else have the BH800?
I have the BH800- works absolutely fine with my TyTn using the latest firmware (on the Tytn, not the headset!).
Do we know that the Cingular 8525 will not work with the BH-800 by experience or by heresay??
I had the TyTn for a brief period of time, trialed the JasJam, and now have the 8525 -- thus far the 8525 has proved to have the most stable firmware, better radio, etc. so I can't imagine the Bluetooth being behind.
I just received my 8525 from premiere and it came with a small flyer that reads
The Nokia BH800 and Motorola H670 bluetooth headsets are not compatible with the Cingular 8525 and Cingular 8500 at this time. Compatibility with these headsets will be available via software download in the near future.
help!!
I see that im not the only one having problem with the Nokia BH800, im happly using the Black v3.0.1 rom on my hermes (softbank) but i cant seems to make the BH800 to work handsfree, did any one have a solution for that??
thanks
thetechnogeek said:
I have the BH800- works absolutely fine with my TyTn using the latest firmware (on the Tytn, not the headset!).
Click to expand...
Click to collapse
I have the Softbank edition which firmware is recommended to work with the Nokia BH800?
pls help
Hi All
Found a lot of wonderful stuff here, but still stuck.
Can an O2 XDA Mini S be 'flashed' to support A2DP? I want to
use mine with a set of Motorola S9 Bluetooth stereo headphones
and MP3 player software
I have tried a number of ROMs (TNT 4.0, etc) but it still I only get a
'hands free' check box not a 'bluetooth stereo' or the like box
I have ROM version 2.21.4.1.WWE
Protocal Version 413.1.03
ExtROM Ver 2.21.4.101
Any help for a poor newbie would be great
Thanks in advance.
I use Vanilla by NotTooSmart, and A2DP works fine with this ROM.
If You cant find it on the net, please let me know via PM, and I will upload it somewhere for You.
Hi
Thanks for the reply - I have got a bit further.
It appears my unit may be CID locked, so I have been using batch
tool and pdocwrite and that seems to work.
I have tried Titan V2.0, TNT4.0 and SeeNoEvil all of which give me WM6/
A2DP, however all of them stop my 'Contacts' from working. When I tap
'Contacts', it flashes up and closes again - any ideas? Do I need pocket
outlook installed?
JayDee
Are you saying that if your Wizzard is CID Locket you will not get the A2DP module to work?
I have a G4 and use ShellTolls to flash it.
I am just about to purchase an BT Headset.
Please reply and let me know if there will be any problems.
Cheers,
Slawek
Hello,
I have Polaris, ROM M-Anime 2.0 Final, Radio 1.59.44.02.
Is very good rom, but still I cant find sulution with my bluetooth headset. (Plantronics pl-510 and Nokia BH801).
Pairing is ok, no problem, but when call no sound in headset, and later polaris frezz, I cant do anything, only soft reset helps.
In forum I read some solution, but they not help ?(change bit poll and etc.)
Maybe someone know realy good solution?
Thank you
P.S. Obex and Active Sync is working
I have Plantronics Voyager 520 (dual), I use C_Shekar 3.18.931aCS WWE Radio 1.59.44.02. and all works well...
Mano42, can you wrote me registry entries
Hkey_local_machine-software-microsoft-bluetooth-A2DP
Thank you