Since I have upgraded the firmware I cannot un-check the "safe mode" box in options. I uncheck it but when I reopen the option dialog it is still checked and therefore my Qtek is slow :-S Any clues?
What version of SPb Pocket Plus?
Fenix said:
Since I have upgraded the firmware I cannot un-check the "safe mode" box in options. I uncheck it but when I reopen the option dialog it is still checked and therefore my Qtek is slow :-S Any clues?
Click to expand...
Click to collapse
mine is checked tooo...I have just noticed it!...but still not slow :shock: are u sure that if the item is checked in the option menu it means its activated??? :?:
Yes because whan I uncheck it it is fast for few minutes and slows down again...
Guys, what version of P+ are you using?
And what ROM verions do you have?
Version 3.0.4 works great with ROM 1.6.7 (Qtek). Soon there will be a new version with some "sweet" features
Fenix said:
Yes because whan I uncheck it it is fast for few minutes and slows down again...
Click to expand...
Click to collapse
I'm testing...I unchecked just now let's see if it re-appear checked...tomorrow the results
Same versions of P+ and ROM here...
I checked my P+:
Unchecked Safe mode, waited for 20 sec and soft reset. Safe mode is still unchecked. Mystery?
Where do you have your P+ installed? What is the option of safe mode do you have (every time or when device worked less than a minute)?
The thing is that this module doesn't have to slow down the device.
Check you File Explorer options. Recommended: leave only Properties (if you need it) checked and disable all other options.
Related
After install the new rom, and choose the Basic mode, the O2 Active already installed (it won't show until you choose program---Active),
But once the o2 active show in the today screen, i can't remove it until i choose the `install type` to basic mode again..
Can't uninstall O2 active in remove programs
And I found out that After 'hardreset' , and install corparate mode, the storage is showing 4.85 MB in use
and SMS is work, but MMS and GPRS doesn't work..
And even the 'task manager' is not in programs
(by the way...the speed is much much faster than i choose basic mode)
Then i hardreset again and install in 'Basic mode'
Storage : 11.22MB in use
And SMS , MMS, GPRS..etc.. working fine
then i go to program---'install type'
and choose corparate mode without hardreset
Storage: 7.07MB in use
SMS, MMS, GPRS..etc..working fine (and the O2 theme still there)
but the 'install type', 'Active' and 'task manager' , Email and hotspot in programs has gone. The battery icon has gone also..
but the V2R o2ActiveUI v4.0 still in the list of ' Romove programs which i can't remove it.
So i just want to know what is the exact different between Basic mode and corparate mode?
Is it only the GPRS, MMS,e-mail setting and O2 Theme?
Does it worth to install Basic mode then corparate mode?(only 2MB different)
anyone? :?:
Why does it that sometimes when I select to use my Phone Pad it just stays on the keyboard? and the input selection hangs from then on..stays on the keyboard forever.. until soft reset.
Im using 20060414 ROM and T9 Phonepad directly from my Mini..
Is there a version specifically for the Atom?
Thanks
NR
Yes, there is a version for the atom. Use the second one in this thread http://forum.xda-developers.com/viewtopic.php?t=47491 :wink:
victoradjei said:
Yes, there is a version for the atom. Use the second one in this thread http://forum.xda-developers.com/viewtopic.php?t=47491 :wink:
Click to expand...
Click to collapse
I have tried the Atom version as you suggested but the Phone pad still hangs sometimes I select it.. mostly after i have activesynced with my PC..
Can anyone verify? in the following steps
Reboot -> Active Synced (USB) -> Goto messages -> click on input button -> select phone pad.. does it hang?
Thanks
NR
BUMP!
Any solutions yet?
try reinstalling it again, no need to remove first it will do a remove and install and should work fine.. check other thread tho for other issues
Sooz said:
try reinstalling it again, no need to remove first it will do a remove and install and should work fine.. check other thread tho for other issues
Click to expand...
Click to collapse
tried this a number of times..still it would revert back to keyboard.
think it's caused by having too many today screen plug-ins.
remove some or all the plug-ins and try again
Hi all,
something strange happened to my XDA (O2 ROM v2.21.4.101):
* my "remove programs" list is now completelly empty, even if I have many programs installed and running!
* I can no longer install any new program ("exe" or "cab") - installation starts, but always ends with unsuccessful message
* active sync 4.2 no longer connects!!
Apart from this, everything seems to be in order.
Any help/hints would be mostly appreciated, trying to avoid an always painfull "hard reset"...
Thanks!
Hm, have you tried updating your ROM? That would reset your phone and update it so it should work...
But you would loose your contacts etc as you cant sync now? Hmmm
keyser said:
Hi all,
something strange happened to my XDA (O2 ROM v2.21.4.101):
* my "remove programs" list is now completelly empty, even if I have many programs installed and running!
* I can no longer install any new program ("exe" or "cab") - installation starts, but always ends with unsuccessful message
* active sync 4.2 no longer connects!!
Apart from this, everything seems to be in order.
Any help/hints would be mostly appreciated, trying to avoid an always painfull "hard reset"...
Thanks!
Click to expand...
Click to collapse
modify the registration:
HKLM\ControlPanel\AdminPassword\Group=0x1(1)
delete the key "Redirect"
Than soft restart. You'll find a "Policy" or "Stratagy" icon in the "System" page of the "Setting" window. Clear the checkbox of restriction.
Thanks for the info - unfortunatelly, I already did an hard reset to the PDA. I will keep it for future reference, though
biolover said:
modify the registration:
HKLM\ControlPanel\AdminPassword\Group=0x1(1)
delete the key "Redirect"
Than soft restart. You'll find a "Policy" or "Stratagy" icon in the "System" page of the "Setting" window. Clear the checkbox of restriction.
Click to expand...
Click to collapse
just for the record that check box was already clear when I looked at it and it didn't do anything for me
Had to do a restore from a back up a couple weeks ago. damn it.
Mine did it after a corrupt install. SOB.
The values basically haven't changed the behavior...
Hi all,
I have copied the values exactly as they were, but still nothing happens...furthermore my ActiveSync on the MDA Vario seems not to recognise any connections, even when the phone is connected with the ActiveSync of the PC. Is there any way maybe to reinstall only the phone portion on ActiveSync in the MDA? I downloaded a file "activesync.exe" from the ftp server. is it the pocketpc portion of activesync?
Thx a lot
Anyone have the same problem or any thoughts on this one.
I have a Cingular 8525 Phone
Rom version 1.34.502.1
Rom Date 09/21/06
Radio Version 1.16.00.00
Protocol version 32.53.7018.01H
I have loaded Chronos version 2.9.5,
when ever I soft reset my phone I get an error message at startup of
"Cannot execute \Windows\ChronosStartup.exe"
This error message window pops up 2 to 5 times. This will sometime cause my phone to halt in the middle of booting (at the blue Windows 5.0 screen)
I have attached a screen captures of the error message and the about screen from Chronos.
I also tried SpbTime 2.1.2 and get a simluar error message of
"Cannot execute \Windows\SpbTime.exe"
i got this answer from SPB:-
"I would like to apologize for the inconvenience with Spb Time.
Unfortunately, such problem happens on some specific devices. Yet, we've already found a workaround.
Could you please try the following:
- Uninstall Spb Time
- Reinstall it again
- Immediately after that run UnregNotify.exe, which can be downloaded from:
http://www.softspb.com/downloads/time/UnregNotify.zip "
Doesn't to appear to happen any longer (prob i had was "can't execute \windows\spbtimenotify.exe")
Thanks
I'll give it a try and let you know if it fixes my problem.
I was getting the same error of "can't execute \windows\spbtimenotify.exe"
guess I just mis-typed it in my orginal posting.
Thanks.
Ok I unistalled it and reinstalled and ran the UnregNotify.exe. Just soft booted and no error. Working fine now.
Thanks again
I found out that this is caused by the Time Zones setting in the phone settings. If it is checked, it causes this error. Once I unchecked it, the problem went away.
dma1965 said:
I found out that this is caused by the Time Zones setting in the phone settings. If it is checked, it causes this error. Once I unchecked it, the problem went away.
Click to expand...
Click to collapse
I'll try this also.
good infor to have.
Jeff
dma1965 said:
I found out that this is caused by the Time Zones setting in the phone settings. If it is checked, it causes this error. Once I unchecked it, the problem went away.
Click to expand...
Click to collapse
I tried unchecking the Time zone setting. This but it had no effect on the phone with either Spb Time or Activekitchen Chronos.
I will stick with the fix for Spb Time.
Thanks for the help all
cannot execute \windows\spbtimenotify.exe
I had the problem with an error message on my HTC Mogul ...cannot execute \windows\spbtimenotify.exe and search here for help///
thanks for the posting..this link definetely works...
http://www.softspb.com/downloads/time/UnregNotify.zip "
NO MORE ERROR MESSAGE!!!!
Guys help me please!!!
When i try to install some .cab file i've receive message ""Installation of [Program which is installing] for windows mobile.CAB was unsuccessful
I try to flash rom 2-3 times, but still makes the same problem
what CAB file you are installing? maybe the CAB file youre trying to install is not compatible for your device...
I tried to install Skype 3.0 And SKTools, but on the old ROM and original running perfect, now even on original rom makes this problem (I tried with original ROM, but again without success)
P.S. How I can restore all setings to default (Registry,plug-ing,files and everything) as when i bought it
Hi7MaN said:
I tried to install Skype 3.0 And SKTools, but on the old ROM and original running perfect, now even on original rom makes this problem (I tried with original ROM, but again without success)
Click to expand...
Click to collapse
-- uhmm i dont use Skype and SKTools as you are but maybe someone on this forum can drop by and help you with that...
Hi7MaN said:
P.S. How I can restore all setings to default (Registry,plug-ing,files and everything) as when i bought it
Click to expand...
Click to collapse
- To restore to factory settings Go To Settings/System/Clear Storage input 1234 and tap OK... this will return all youre system settings to factory defaults (WARNING) this is like HARD RESET!
I tried with "Clear Storage" option, but again without success
Any other advices ?
Hi7MaN said:
I tried with "Clear Storage" option, but again without success
Any other advices ?
Click to expand...
Click to collapse
Try to hard reset your device this will restore everything back to standard
Hold camera and comms button press reset with your stylus keep holding buttons untill message appears on screen then release both buttons and press green send key
A message should appear saying formatting and your device will reset you will go through the set up like a newly flashed rom ie,, calibrate screen ect..
Or you can look on wiki for more
Also i see that you are having trouble installing those cab files you must make sure that the version you are trying to install is both compatible with your device and compatible with your windows mobile version
I fix the problem
Windows Vista makes me this problem, i tried to install .cab files on XP and everything works perfect
Thanks to all
Sorry for my bad English
arrrgh
nice to hear this!!!
no wonder Microsoft scrapped that crappy OS but now they are making an even worse pile of crap
I don't know about Windows Mobile but I had almost the same problem on Android, maybe this explanation can help you and you can look for your own solution then on the Windows Mobile side.
http://forum.xda-developers.com/showthread.php?t=1225841