Anyone have the same problem or any thoughts on this one.
I have a Cingular 8525 Phone
Rom version 1.34.502.1
Rom Date 09/21/06
Radio Version 1.16.00.00
Protocol version 32.53.7018.01H
I have loaded Chronos version 2.9.5,
when ever I soft reset my phone I get an error message at startup of
"Cannot execute \Windows\ChronosStartup.exe"
This error message window pops up 2 to 5 times. This will sometime cause my phone to halt in the middle of booting (at the blue Windows 5.0 screen)
I have attached a screen captures of the error message and the about screen from Chronos.
I also tried SpbTime 2.1.2 and get a simluar error message of
"Cannot execute \Windows\SpbTime.exe"
i got this answer from SPB:-
"I would like to apologize for the inconvenience with Spb Time.
Unfortunately, such problem happens on some specific devices. Yet, we've already found a workaround.
Could you please try the following:
- Uninstall Spb Time
- Reinstall it again
- Immediately after that run UnregNotify.exe, which can be downloaded from:
http://www.softspb.com/downloads/time/UnregNotify.zip "
Doesn't to appear to happen any longer (prob i had was "can't execute \windows\spbtimenotify.exe")
Thanks
I'll give it a try and let you know if it fixes my problem.
I was getting the same error of "can't execute \windows\spbtimenotify.exe"
guess I just mis-typed it in my orginal posting.
Thanks.
Ok I unistalled it and reinstalled and ran the UnregNotify.exe. Just soft booted and no error. Working fine now.
Thanks again
I found out that this is caused by the Time Zones setting in the phone settings. If it is checked, it causes this error. Once I unchecked it, the problem went away.
dma1965 said:
I found out that this is caused by the Time Zones setting in the phone settings. If it is checked, it causes this error. Once I unchecked it, the problem went away.
Click to expand...
Click to collapse
I'll try this also.
good infor to have.
Jeff
dma1965 said:
I found out that this is caused by the Time Zones setting in the phone settings. If it is checked, it causes this error. Once I unchecked it, the problem went away.
Click to expand...
Click to collapse
I tried unchecking the Time zone setting. This but it had no effect on the phone with either Spb Time or Activekitchen Chronos.
I will stick with the fix for Spb Time.
Thanks for the help all
cannot execute \windows\spbtimenotify.exe
I had the problem with an error message on my HTC Mogul ...cannot execute \windows\spbtimenotify.exe and search here for help///
thanks for the posting..this link definetely works...
http://www.softspb.com/downloads/time/UnregNotify.zip "
NO MORE ERROR MESSAGE!!!!
Related
I installed V2r's Skin2Choose and then uninstalled it soon after.
Now everytime I turn on my xdaii I get an error message saying "Cannot execute \Windows\V2r\Skin2Choose 3.5\onCHange.exe"
it's very annoying.
does anyone know how i can remove this.
thanks.
Dino
windows\startup
and remove the program that cause that
nope i trieed that. it's not there.
i did find a program that cleared it out of the notifications list.
http://www.scarybearsoftware.com/ppc_cn_overview.html
problem solved
whew,
I tried to install ClearVue PDF from the O2 supplied CD and it failed (with error messages in German!) - however when I tried to 'remove programs' I get the above message and ClearVue is still listed under programs. Ditto with Skype. These are the only 2 things I have added since switching my XDa mini s on for the first time. How should I uninstall these properly....so I can start again! Thanks
Well if you want to install it. Try installing it again. Then if fails again download the latest version of it from their website and install that. Hopefully you will have the registration key installed and it will work. Otherwise you will at least have an English error message.
Thanks
I'll try the web site - looks like I can't just download ClearVue - does it all come witin the 'software update' bundle?
No no no! ;-) The Clearvue website http://www.westtek.com/pocketpc/pdf/ As long as the install you have made registered it the trial version will be installed as fully operational.
Thanks
I'll have a go...
Sometimes a program wont delete because its running. make sure you have nothing running before removing it
Is this not an issue with the persistent memory in the Wizard? I've never been able to uninstall things, always comes up with that error, but installing an AKU 2.3 ROM seems to have solved the problem.
I think it's a persistent issue - I've tried every way of uninstalling (from Xda and PC via ActiceSync etc) and ClearVue is still there (and not working). However last comment slightly too techy for me (sorry - just a user....)? Is this an OS upgrade....?
The ROM is an OS upgrade, read all about it here:
http://forum.xda-developers.com/viewtopic.php?t=53954&highlight=
Whether the newer ROM solves the problem, someone better informed than me will have to tell you. It may just be coincidence that I can now uninstall programs properly??
paulrockliffe said:
Is this not an issue with the persistent memory in the Wizard? I've never been able to uninstall things, always comes up with that error, but installing an AKU 2.3 ROM seems to have solved the problem.
Click to expand...
Click to collapse
Same here, ever since upgrading to AKU2.3 i haven't got that uninstall error *Knock on wood*
Hi everyone, I just recieved my brand new Diamond2 in Czech localisation (original from retailer) and after first boot I got this error:
Error
Install
\Windows\OpenCZ_Settings_Topaz.CAB
failed, code=0x80090006
I assume its the czech localisation but any advice? If I dont solve the problem, Ill send it on monday back
Regards
Pylorus
There are a couple of things you can do:
- Manually try to install it using the file explorer: \Windows\OpenCZ_Settings_Topac.CAB
- Make a hard-reset (hold Vol-up & Vol-Down and press the reset button under the battery case to see if it happens again.
Thx for swift reply ...
- I tried several hard resets and booting with / without SIM and or microSD - still the same error
- I managed to get the phone partially working, because you can move the error window aside and access the startmenu and open explorer. I executed the file manually, but got the error message: "The program cannot be installed because it is not digitally signed with a trusted certificate."
Unfortunately I can not access the phone via USB (first customisation hasnt finished and active sync does not open) and I'm afraid flashing the device with another ROM because of warranty
Any Idea how to tweak the phone to lower the phones security allowing installing not signed cabs?
Thx...
well if you get this error even after a hardreset, you should definitely send it back..
OliveJeans said:
well if you get this error even after a hardreset, you should definitely send it back..
Click to expand...
Click to collapse
I will ... but any idea how to lower phones security?
pylorus said:
Hi everyone, I just recieved my brand new Diamond2 in Czech localisation (original from retailer) and after first boot I got this error:
Error
Install
\Windows\OpenCZ_Settings_Topaz.CAB
failed, code=0x80090006
I assume its the czech localisation but any advice? If I dont solve the problem, Ill send it on monday back
Regards
Pylorus
Click to expand...
Click to collapse
My device from Czech too. I found this cab file in Windows folder, if you need it i'll upload it for you.
pylorus said:
Thx for swift reply ...
I executed the file manually, but got the error message: "The program cannot be installed because it is not digitally signed with a trusted certificate."
Any Idea how to tweak the phone to lower the phones security allowing installing not signed cabs?
Thx...
Click to expand...
Click to collapse
Try sdkcert. That should do what you want install it before installing your .cab what is needed
Problem solved - i sent the device back and the whole board was replaced - new IMEI, but now its working like a charm
for the future..I have had a same problem with my TD2..After few hours I found out that I could this error off in taskmanager. Then it worked.. It was just some czech layout for my topaz but I did not want it either.. So for those who will buy TD2 with this error and donĀ“t want chzech langugage on it, just close it in taskmanager..
Hi,
I've been using my HD2 for some weeks now and yesterday it out of a sudden started bursting error messages one after another.
First at startup i get:
- "A problem has occured with ConnectionSetupAuto.exe" Please tell Microsoft about this.... Don't Send/Send
I get similiar messages whenever I try opening my Messages:
- "A problem has occured with Messaging_Client.exe" and i can't access them.
Same goes on and on with Comms Manager etc..Tried a Soft Reset but it did not help.
My question is if something could be done before I go for a Hard Reset?
Searched the forum but didn't find such a topic so I post this one.
Thanks in advance.
Just disable the error reporting It doesn't actually solve the problem but i found out that whenever i get an error it still works.
lorin.bute said:
Just disable the error reporting It doesn't actually solve the problem but i found out that whenever i get an error it still works.
Click to expand...
Click to collapse
Where disable that?
Disabling the error reporting wouldn't have fixed it as most of the applications weren't running due to these err messages - couldn't open messages, comms manager, system settings etc...so i went for a hard reset and everything's fine now.
Thanks.
Hi guys,
I did a hard reset 3 days ago, and ever since haven't been able to download/install marketplace. My internet connection is working fine and I've tried both with 3g and Wifi. It keeps giving me an error message saying "There maybe a problem with marketplace service right now. Check your connection and try again later."
Anybody knows anything about that? Is it really a problem with Marketplace or is it my phone? Any help would be appreciated
I did even download the cab file from the internet, but when trying to install that one it says "Installation as unsuccessful. The Program can#t be installed because it does not have sufficient system permissions".!!
Thanks,
Hallaj
I did a hardreset too, and since then I can't get anything from Windows Marketplace either...
Keeps telling me that it can't logon to the Windows Marketplace servers, and that I should try again in a few seconds...
Also tried the regedit with no luck...
Any help would be appriciated greatly!
Stock danish ROM 1.66
Thanks in advance.
Hallaj85 said:
Hi guys,
I did a hard reset 3 days ago, and ever since haven't been able to download/install marketplace. My internet connection is working fine and I've tried both with 3g and Wifi. It keeps giving me an error message saying "There maybe a problem with marketplace service right now. Check your connection and try again later."
Anybody knows anything about that? Is it really a problem with Marketplace or is it my phone? Any help would be appreciated
I did even download the cab file from the internet, but when trying to install that one it says "Installation as unsuccessful. The Program can#t be installed because it does not have sufficient system permissions".!!
Thanks,
Hallaj
Click to expand...
Click to collapse
adjust date and time to your region and it will work ,happened to me
hoss_n2 said:
adjust date and time to your region and it will work ,happened to me
Click to expand...
Click to collapse
Worked for me once, updating the FaceBook app...
But after the reset, it didn't work anymore.
Tried applying the same changes as before, but no luck.
I then disabled the "use network ressources to adjust time/local" option, and now it works as it's supposed to.
Since when have the auto-time-update been an issue?