Related
Blank screen of writing a new text message on 818pro.
Is there anyone can help? There will have no problem after hard reset, it seems one of the programs causes this problem. But does anyone know the reason? Is it memory insufficient?
scott4 said:
Blank screen of writing a new text message on 818pro.
Is there anyone can help? There will have no problem after hard reset, it seems one of the programs causes this problem. But does anyone know the reason? Is it memory insufficient?
Click to expand...
Click to collapse
I have absolutely not clue what you want here. Could you rephrase your problem again and explain it a bit more clearly please ?
Spatzm said:
I have absolutely not clue what you want here. Could you rephrase your problem again and explain it a bit more clearly please ?
Click to expand...
Click to collapse
when I press "New" button in order to write a new SMS (text message) of my 818pro. The content of the message is just a blank screen, I can do nothing with it except closing it. This also affects on MMS and Email.
Is there anything corrupted?
scott4 said:
Is there anything corrupted?
Click to expand...
Click to collapse
This reminds me of something yes. Could you please do these things and reply with answers to my questions ?
a) How much space do you have remaining on your device (how much free ram) ?
b) Go to Start -> Settings -> Installed Software or hows it called (the place where you see what software is installed) and tell me if the list is still there. Do you see your installed programms in the list or is it empty ?
http://www.choiceway.com/content/gsi/ppc_rem9.gif
c) Can you uninstall or install new software ? Please test with some small CAB file on your device.
is Arabizer installed on ur deivce?!when im using unofficial pdamobiz roms on my prophet,after installing arabizer,the new message window becomes exactly as u said!after disbaling the arabizer it worked again.i hope this helps.
Spatzm said:
This reminds me of something yes. Could you please do these things and reply with answers to my questions ?
a) How much space do you have remaining on your device (how much free ram) ?
b) Go to Start -> Settings -> Installed Software or hows it called (the place where you see what software is installed) and tell me if the list is still there. Do you see your installed programms in the list or is it empty ?
http://www.choiceway.com/content/gsi/ppc_rem9.gif
c) Can you uninstall or install new software ? Please test with some small CAB file on your device.
Click to expand...
Click to collapse
Hello Spatzm,
Thanks for your reply.
a) 23.85MB RAM left
b) ce-star suite v2.8 r2a
c) yes, i can uninstall and install new software.
--> this problem exists right after I sync the data and then press soft reset button. Is this the point? because whenever I press reset button, the SMS I wrote disappear even my pda has been just done a hardreset.
niloofari said:
is Arabizer installed on ur deivce?!when im using unofficial pdamobiz roms on my prophet,after installing arabizer,the new message window becomes exactly as u said!after disbaling the arabizer it worked again.i hope this helps.
Click to expand...
Click to collapse
I dun think "Arabizer" is installed. Is it a program? or something about "Arab"?
Anyway, I can't find it from "Remove program". Tks.
scott4 said:
I dun think "Arabizer" is installed. Is it a program? or something about "Arab"?
Anyway, I can't find it from "Remove program". Tks.
Click to expand...
Click to collapse
I hardreset my 818pro again, but never press the soft reset button, so far ---- OK!!! Why the reset button cause such problem on serveral version of ROM?
AKU2.3.1, AKU3.2, AKU3.3
Arabizer is a program which enables your device to show arabic fonts.when i install it on official roms,there is no problem but when i install it on pdamobiz roms then i have a blank new sms window.as i said,after disbaling the arabizer it works again.hope it helps.
niloofari said:
Arabizer is a program which enables your device to show arabic fonts.when i install it on official roms,there is no problem but when i install it on pdamobiz roms then i have a blank new sms window.as i said,after disbaling the arabizer it works again.hope it helps.
Click to expand...
Click to collapse
There is no such program installed on my 818pro.
I am using AKU3.3 clean rom.
scott4 said:
There is no such program installed on my 818pro.
I am using AKU3.3 clean rom.
Click to expand...
Click to collapse
Probably a ROM issue then. If you recall my reply above with the few questions. I initially had in mind that you might run into the security stuff (certification messup) issue but this is not the case.
scott4 said:
I hardreset my 818pro again, but never press the soft reset button, so far ---- OK!!! Why the reset button cause such problem on serveral version of ROM?
AKU2.3.1, AKU3.2, AKU3.3
Click to expand...
Click to collapse
You have the answer right there. The registry is only written back periodically. After doing any changes you should not quickly follow up with a soft reset otherwise any new information will be lost. At the very least switch off and on again before doing a soft reset. This is not a ROM fault it is simply that writes to the registry are not carried out immediately.
If you want full details see here:
http://www.pocketpcmag.com/blogs/index.php?blog=3&p=898&more=1&c=1&tb=1&pb=1
Mike
mikechannon said:
You have the answer right there. The registry is only written back periodically. After doing any changes you should not quickly follow up with a soft reset otherwise any new information will be lost. At the very least switch off and on again before doing a soft reset. This is not a ROM fault it is simply that writes to the registry are not carried out immediately.
If you want full details see here:
http://www.pocketpcmag.com/blogs/index.php?blog=3&p=898&more=1&c=1&tb=1&pb=1
Mike
Click to expand...
Click to collapse
Hello Mike,
Thanks alot for your explaination. The data cannot be written immediately, so that should not press soft reset button right after a SMS (text msg) is written. This question is answered well.
However. My main problem is why the SMS writing page became blank and never recover until a hardreset? I had this problem after sync PIM and then pressed soft reset button.
scott4, nice to meet u Do u come from HK?
I have the same problem before...
At that time , I used AKU2.? (forget XD) and ce-star too!!!
After hard reset for about a week.....the problem will appear again= =
SO i always reset -> blank -> reset -> blank -> loop....
until I upgrade my 818pro to 2.3, ...
and I don't use ce-star again....since it always hang= =
firstly i use monster chinese...but i found that the font is very ugly.....
so at last , i don't use monster chinese anymore, I only copy mingliu font from my winXP, and edit the registry to let my 818pro can read chinese....
Also , I download the Chinese input method from monster website, but without using monster XDDD
I don't know it's the problem of AKU? or ce-star? or just i'm very lucky.......
I want to upgrade to AKU3.3 too!!! many people say that it's very fast when you compare 3.3 to 2.3.........i wanna try it~>< But now....I'm afraid the SMS blank problem will appear again= =XD
it's the problem of cestar, i used to have the same problem with cestar installed, after uninstall it the problem was gone
I upgraded my Blueangel to windows mobile 6 a couple of days ago, yesterday i was reset it. when it powered on i have the windows mobile 6 screen and nothings happens thereafter, it is not connection to activesync and i m not able to ROM Upgrade.
Please help me ASAP
read the wiki carefully
try a hard reset after and do the no+yes+yes ritual in the hard reset.. it should worked...
regards
adri
baybe it is because third party software you installed, it happened to me with the touchflo which replaced the touch.dll with another one for another device, also with HTC Plus today plugin
I had it after installing VBAR... you have to reset it and press the record and camera button, then clear the registry HIVE and press the mail button... it will be hard resetted but in wm6 you don't lose any data, just some settings and cabs...
Yeah, I got this problem too a few days ago.. annoying...
When I tried to back up my data using Sunnysoft backup manager, BA had to restart, and then it stuck in the WM6 page... ended up clearing the whole thing again using the no yes yes option...BA was able to start up on safe mode though... weird
I only had this problem once though....
Hmmm, interesting few people have this problems with different circumstances, however leading to the same problem...
is it really WM6 issue or is it 3rd party apps issue?
joseph.sapri said:
is it really WM6 issue or is it 3rd party apps issue?
Click to expand...
Click to collapse
good question!
it just happened to me as well.... i had an almost fresh install of WM2006 (just downgraded, merged Extrom and upgraded again).
I installed some few cabs and eventhough it worked fine for a day, it then started to freeze while booting again and again....
i never had the problem before merging the rom though...
it happened to me also, after doing a soft reset using pbar. it ends up in the green screen with the microsoft logo without going any further. i've tried several soft resets after but it always ends up in that mode.
had to perform a hard reset and install my favorite apps again.
well maybe there are some incompatiblityes with those programs you mentioned, i have not use them my BA has the default apps (the posted cabs) Sprite Backup 6, Htc Home 1.5, Adobe Flash Lite and i have no problems at all
xplode said:
well maybe there are some incompatiblityes with those programs you mentioned, i have not use them my BA has the default apps (the posted cabs) Sprite Backup 6, Htc Home 1.5, Adobe Flash Lite and i have no problems at all
Click to expand...
Click to collapse
have you installed all cabs you posted (cabs & cabs2)?
in what order?
whats Sprite Backup?
and which one is the HTC Home 1.5? (i only see HTC Home6?!?)
sorry, but i am really getting more and more confused...
regards,krz
Sprite backup is the best backup softweare IMO, yes all cabs (cabs and cabs2) Home6 is HTC Home 1.5
thank you very much for your answer, xplode!
there are three HTC HOME6 cabs out there:
1) Helmi HomePlug_Comp.cab: found in Helmi_C's WM2006 archive FLASH.zip
2) Helmi_HtcHome6_WM5_comp_sdkcert.cab: found in Helmi_C's WM2006 archive AddOn.rar
3) HOME6: an archive with two folders (WM5 + WM6) and HTCHome.cab
are there any differences?
is one better than the others?
i never found an answer to these questions...
regards,
krz
KRZTF said:
thank you very much for your answer, xplode!
there are three HTC HOME6 cabs out there:
1) Helmi HomePlug_Comp.cab: found in Helmi_C's WM2006 archive FLASH.zip
2) Helmi_HtcHome6_WM5_comp_sdkcert.cab: found in Helmi_C's WM2006 archive AddOn.rar
3) HOME6: an archive with two folders (WM5 + WM6) and HTCHome.cab
are there any differences?
is one better than the others?
i never found an answer to these questions...
regards,
krz
Click to expand...
Click to collapse
Use Home6 if you want to be able to modify the HTC Home tabs from 6 (default) to less than 6..... this is the only one working....
With Helmi_HTCHome6.. it also works, but cannot modify the tabs......
never tried the other one....
OK OK I had this problem and it solved it without losing data. First i tried to reset the device , like 30 times with no success. Even with a hard reset it didnt work. So you just Put ur device in the booloader mode and then soft reset it and voila. i dont know if it's really the correct solution but it worked for me for 3 times when i had that dumb WM6 screen. It's because of Battery status software ( 100% sure )
BA Freezing
xplode said:
baybe it is because third party software you installed, it happened to me with the touchflo which replaced the touch.dll with another one for another device, also with HTC Plus today plugin
Click to expand...
Click to collapse
Can anyone tell us which third parties programs that cause the freezing or which are compatible whit WM6. To used or avoid them.
Hi,
same problem here. I just installed the cabs from helmi (Thanks again!), the HTC Home (Helmi_HtcHome6_WM5_comp_sdkcert.cab), Acrobat reader and powerpoint (out of this cabs in the first message in the central BA6 Thread) and no additional software. I've re-installed it two times, but that doesn't help .
@ Xeon: Maybe a good work-around, I will give him a try,
UPDATE: @ XEON: Doesn't work for me
regards
Andreas
OK im again facing the same problem it seems my solution didnt work. As far as it seems to, i had to soft/hard reset more than 20 times to solve it. i dont get it. when i reset it the problem is still bla bla bla.. but when u leave it stuck for 10 mins and then reset it , it will work. the point is that after all , u dont need to format/clear registry. All u need is to keep trying. WEIRD [email protected]#[email protected]$#$
I keep having the problem after installing a new cab with a soft reset. The only way to get out of the WM6 screen is to go into bootloader and a soft reset. Just like Xeon said. However, I don't think it is the battery issue because if I just do a normal soft reset, it starts up fine. The problem arrives only when a soft reset is required to finish an installation from cab.
Hello
Today HTC relase the G-Sensor Calibration for Diamond, see in hotfix seccion
Download: http://dl.htc.com/downloadfiles/Driver/\HTC Touch Diamond\Diamond_GSensorCalibrator.cab
It's multilanguage, in my Diamond show in Spanish but with some issues
And now don't miss calibration after soft-reset.
Offcial Info: http://www.htc.com/www/SupportDownloadList.aspx?p_id=133&cat=0
Hot Fix for G-Sensor Calibration in HTC Touch Diamond
If you encounter a G-Sensor malfunction, for example when playing the “Teeter” game or changing your web browser orientation, please install this hot fix so that you can perform the calibration by yourself. Note: This hot fix can only be installed on devices with ROM version 1.93.XXX.X or above. To check your ROM version tap Start > Settings > System tab > Device Information to confirm the ROM version.
Click to expand...
Click to collapse
and the download page:
Date: 2008-09-26 Category: Hotfix
If you encounter a G-Sensor malfunction, for example when playing the “Teeter” game or changing your web browser orientation, please install this hot fix so that you can perform the calibration by yourself. Note: This hot fix can only be installed on devices with ROM version 1.93.XXX.X or above. To check your ROM version tap Start > Settings > System tab > Device Information to confirm the ROM version.
Installation Instructions: Follow the instructions below to install this software onto your device.
1. Make sure you have Microsoft ActiveSync® installed on your Windows XP PC or Windows Mobile Device Center on your Windows Vista® PC. You can find Microsoft ActiveSync from this link or Windows Mobile Device Center from this link.
2. Connect and synchronize your device with your PC via Microsoft ActiveSync® or Windows Mobile Device Center using the USB cable.
3. To download the hot fix, first select the check box below. Next, select the hot fix and the desired FTP site then click Download.
4. Copy the hot fix, which is a cab file, to your device.
To install, tap the hot fix and follow the on-screen instructions. After installation is done, please tap Start > Settings > System tab and select G-Sensor calibration program to proceed with the calibration process.
Note: If you perform a hard reset of your device, you will need to reinstall the hot fix after the hard reset.
Click to expand...
Click to collapse
For me, I needed soft-rest after install for show in tap Start > Settings > System tab
Hi,
I uploaded it HERE
joelabete said:
Hi,
I uploaded it HERE
Click to expand...
Click to collapse
mmm, why in rapidshare?
I put the official download link.
Just a mirror ...
Thanks for the info!
Where is "About" ?
After install Diamond_GSensorCalibrator.cab About buton is missing..
My old version was 1.0 (1817.1829) ..
I found new version info into _Setup.xml of CAB ..
It is 1_0_18182119_0 ..
It should be 1.0 (1818.2119) ..
Yes SoftReset is nedded to appear on Configuration Menu.
Thanks DarkRay_
DAMN !!! there isn't in italian
alfoalfo said:
DAMN !!! there isn't in italian
Click to expand...
Click to collapse
lol you obviously have enough english skills for this. there are like 10 words in the whole app...lol
does it work for you guys?
for me it seems it wont work as well as the "older" version...
TML1504 said:
does it work for you guys?
for me it seems it wont work as well as the "older" version...
Click to expand...
Click to collapse
I can't get it to work at all...
My ROM RUU_Diamond_hTC_Asia_HK_WWE_1.93.831.1
Does not work for me. Device pretends to calibrate, but after calibration it's the same than before. I'm using original German 1.93.407.1 Rom.
Finally woking......yippeee..
Studebaker72 said:
Does not work for me. Device pretends to calibrate, but after calibration it's the same than before. I'm using original German 1.93.407.1 Rom.
Click to expand...
Click to collapse
Hi Studebaker72.
Try this one it finally worked on my Diamond, and keeps calibration after a soft reset...
http://rapidshare.com/files/148847820/Diamond_GSensorCalibrator.cab
Thanks pal, but also that did not work at all. Same phenomenon, in the end the settings jump back to what was there before.
Studebaker72 said:
Thanks pal, but also that did not work at all. Same phenomenon, in the end the settings jump back to what was there before.
Click to expand...
Click to collapse
Exactly like it happens to me. When you click calibrate, it looks like its calibrating, but when the process is over, it just reverts back to before.
For my it worked but the calibration is gone after soft reset
Studebaker72 said:
Thanks pal, but also that did not work at all. Same phenomenon, in the end the settings jump back to what was there before.
Click to expand...
Click to collapse
same problem here!
another eventually interesting information:
a friend of mine got his diamond today, it's a german one with 1.37 and radio 03
preinstalled.
after flashing hardspl 1.40 dev, radio 08 and wildberry v1 he was able to calibrate
the sensor flawlessly.
my diamond was from the first uk batch, otherwise we have ident devices,
same spl, same radio and same rom. but for me the calibration is not working...
Works great on my diamond, even after soft-reset!
German XDA with original O2 1.93.207.2 ROM!
This does not work
Does not work for me either.. Allthough i think i might have found the solution to why some people can get it to work while others can't..
How many degress is your device off calibrated before you try to calibrate it? I have discovered that the people who can get it to work, is if their device is less than 15 degress of calibrated. However if your device is more than 15 degress of, then it won't calibrate..
Can anyone confirm this theory? We discussed this back in the first thread that was created with the g-sensor calibrator tool some time ago..
Guys help me please!!!
When i try to install some .cab file i've receive message ""Installation of [Program which is installing] for windows mobile.CAB was unsuccessful
I try to flash rom 2-3 times, but still makes the same problem
what CAB file you are installing? maybe the CAB file youre trying to install is not compatible for your device...
I tried to install Skype 3.0 And SKTools, but on the old ROM and original running perfect, now even on original rom makes this problem (I tried with original ROM, but again without success)
P.S. How I can restore all setings to default (Registry,plug-ing,files and everything) as when i bought it
Hi7MaN said:
I tried to install Skype 3.0 And SKTools, but on the old ROM and original running perfect, now even on original rom makes this problem (I tried with original ROM, but again without success)
Click to expand...
Click to collapse
-- uhmm i dont use Skype and SKTools as you are but maybe someone on this forum can drop by and help you with that...
Hi7MaN said:
P.S. How I can restore all setings to default (Registry,plug-ing,files and everything) as when i bought it
Click to expand...
Click to collapse
- To restore to factory settings Go To Settings/System/Clear Storage input 1234 and tap OK... this will return all youre system settings to factory defaults (WARNING) this is like HARD RESET!
I tried with "Clear Storage" option, but again without success
Any other advices ?
Hi7MaN said:
I tried with "Clear Storage" option, but again without success
Any other advices ?
Click to expand...
Click to collapse
Try to hard reset your device this will restore everything back to standard
Hold camera and comms button press reset with your stylus keep holding buttons untill message appears on screen then release both buttons and press green send key
A message should appear saying formatting and your device will reset you will go through the set up like a newly flashed rom ie,, calibrate screen ect..
Or you can look on wiki for more
Also i see that you are having trouble installing those cab files you must make sure that the version you are trying to install is both compatible with your device and compatible with your windows mobile version
I fix the problem
Windows Vista makes me this problem, i tried to install .cab files on XP and everything works perfect
Thanks to all
Sorry for my bad English
arrrgh
nice to hear this!!!
no wonder Microsoft scrapped that crappy OS but now they are making an even worse pile of crap
I don't know about Windows Mobile but I had almost the same problem on Android, maybe this explanation can help you and you can look for your own solution then on the Windows Mobile side.
http://forum.xda-developers.com/showthread.php?t=1225841
Proportionally scaled
http://www.multiupload.com/JLYJXGUV0O - multilanguage
http://www.multiupload.com/W3DN2G8UY6 - only english en/us
More info on my blog:
http://marurban.netii.net/?p=95
I tested it on my HTC Wildfire. If someone test, please write if it works.
Isn't this warez?
EDIT: Tested, works for a few seconds, then FCes. Would be great if it worked, as I don't think the official Swype supports QVGA. What is LS fix?
Tattoo has a QVGA resolution, I tested it on Wildfire in the official version does not work landscape mode.
LS = Landscape
If on (tattoo) the official version works in landscape mode please delete the topic.
Well, your version doesn't appear to work at all...
Where can I get the original version to test? From market?
sadly i tried it and it force closes
Maby this help:
1. Delete current ver
2. Reboot phone
3. Install SWYPE
Marurban said:
Maby this help:
1. Delete current ver
2. Reboot phone
3. Install SWYPE
Click to expand...
Click to collapse
I'm trying this right now. I also tried the version without LS fix (with PT fix) and that FC as well, so the problem isn't in the LS fix.
EDIT: No luck Would be great if someone got this going...!
Hi. I have a problem.
I installed swype, then I went to settins> regional settins & text> In text settins check SWYPE box, but when I need the keyboard always is showed the native one.
What is it wrong?
osvaldoll said:
Hi. I have a problem.
I installed swype, then I went to settins> regional settins & text> In text settins check SWYPE box, but when I need the keyboard always is showed the native one.
What is it wrong?
Click to expand...
Click to collapse
tap and hold on any text field and tap on "input method". Then choose swype.
_david_94 said:
tap and hold on any text field and tap on "input method". Then choose swype.
Click to expand...
Click to collapse
Thanks. But I have an other problem. I choose Swype, then the Keyboard is diplayed during a second, suddenly some swype help boxes are displayed and at last Android say that the program must be closed.
osvaldoll said:
Thanks. But I have an other problem. I choose Swype, then the Keyboard is diplayed during a second, suddenly some swype help boxes are displayed and at last Android say that the program must be closed.
Click to expand...
Click to collapse
We all have the same problem: read the rest of the thread.
Install this ver. http://www.multiupload.com/HF7FGXI5HT if it will work i add ls fix.
This one just gives me wrong resolution error, doesn't even start.
I have the same problem with the resolution
Worked _____ on my U8100. Are you sure this isn't w___z? Is this time trialed? It's unbelievable. Landscape works great too.
Edit: This isn't the Tattoo so don't hold your breadth.
work on htc wildfire