I have set up a bluetooth sync on my VARIO on Comm Port 4 so i can synchronize using Active Syc 4.1.
Whenever i decide i want to use my USB cable instead of bluetooth so that i can charge the device at the same time it removes my COM4 port from Activesync so that when i next try to connect by bluetooth it wont work.
How do i fix this problem????
Also where do i download LOKIWIZ and is it worth using and if i have problems with it will a Hard Boot remove it???
Related
Hi!
I have set my ActiveSync in options that it should only snyc on connection and set schedule to manual. But when my XDAII is in its cradle and the PC is running, the device turns on and performs a sync about every 15 minutes. How can this be avoided?
Thanks for help.
Dominik
there is such an option
i just cant recall if it's in activesync on the pc
or activesync on the xda
Try this:
On activ sync on the pc
open up options go to shedule and set server also to manually. see if this work
Hi!
I have already set server option to manual, but that doesnt help.
The problem is, that the XDAII turns on, syncs and doesnt turn off after 5 minutes like I told it to do in the xda settings. It just turns off the backlight, keeps on and starts to sync again after 15 minutes.
Are there any Active Sync options on the XDA itself anyway?
Thanks for help
Dominik
I have the same problem like you.
XDA2 syncronize and then, after about 1 minute it disconnect.
and you are using the 3.7.1 version ?
the older ones are kinda strange
Hi!
I use the 3.7 which came with my XDAII.
Any differences to 3.7.1?
If so, where can I get it?
Best regards
Dominik
Yes, I'm using 3.7.1
I performed a full reset and my PC runs WinXP.
You can find ActSync 3.7.1 at http://www.microsoft.com/windowsmobile/resources/downloads/pocketpc/activesync37.mspx
When I try to make a backup during this process the connection shut down and show following msg "Connection to device was broken during backup. The operation was canceled. Your backup file has been returned to its previous state."
I don't know what I do?
I forgot. I'm using a XDA usb cable on my XDA2 maybe this is the problem. What do you think?
When I'm using the cradle everything is perfect.
I bought the XDA usb cable in order to charge XDA2 while on the road with usb cigarret lighter adapter.
Hi!
I have updated to 3.7.1, but the non-scheduled regular syncs problem remains.
I think this may also be caused by WinXP because when I deinstalled Active Sync, Windows kept checking the connected XDAII every now and then, trying to establish a connection. As I have set ActiveSync to "sync at connect", this regular connect may be what Windows does.
What do you think?
Dominik
Are you using the original cradle/cable? I think the XDA usb cable doesn't works with XDA2 except as a charger.
Hi!
Original cables for me.
Cu
Dominik
Having installed my BT USB dongle after I installed Activesync on my PC, I didnt have the Connection settings in my PC's BT Settings. after setting up the partnership, AS on the JJ would always say i needed to setup a partnership again.
Baffled me for weeks, but today I fixed it, and its very simple to do....
Code:
In your PC's BT settings find the Local Services BT Serial Port, note the com port, in my case COM5.
In AS on the pc make sure the "Allow connections to one of the following" is checked and set to the same com port as the BT serial settings.
Thats it!!! no incomming or outgoing ports needed on the JJ, just go into AS and goto menu and hit connect via bluetooth, off it went and sync'd up, no questions asked.
This is very pleasing to me and I can now fix my work lappy aswell, which is where this will be really useful.
Yes yes it works. I was spending 2 mins connecting over BT every time i wanted to use AS.
Thanks.
i do it but nothing of nothing
THANKS A MILL!
after many days trying to get this to work, i finally got it nailed, keep up the good work guys
Big problem with Activesync by Bluetooth on JasJar
Hi,
I have already read more forum on this question.
I have e problem trying to connect by bluetooth to ActiveSync.
When I pair my JasJar to PC not appear the service ActiveSync, but Serial Port.
Therefore ActiveSync, on JJ, can't connect to my PC.
I have already configure ActiveSync on PC to connect on right Com port.
Please help me, i have lost some night to try it.
I have set up a bluetooth sync on my kjam/Vario which has set itself up on Com Port 4.
Whenever i decide i want to use my USB cable instead of bluetooth so that i can charge the device at the same time it removes my COM4 port from ActiveSync so that when i next try to connect by bluetooth it wont work.
How do i fix this problem????
Also where do i download LOKIWIZ and is it worth using and if i have problems with it will a Hard Boot remove it???
Hi everybody,
I'm trying to sync my trinity with a laptop using bluetooth, but it seems imposible 'til now. Has anybody been able to?
It seems there's not pim service on the p3600, also creating a com connection doesn't work...
Any idea or howto???
Thanks in advance.
You'll need to set up your ActiveSync (AS) in your PC to point to the port which your Bluet is using. After that, use your phone to 'discover' your PC and you should have AS service for your Bt in PC.
You mean...
In Bluetooth configuration on the pc I have COM9 assigned to bluetooth Serial Port and COM8 for ActiveSync. So you say I have to set as incoming serial port COM8 in P3600??
Configure the AS to use COM9 (in your case).
Thanks
But still no luck, it seems to be connected but activesync says there's no device in that port, I'm afraid it's a compatibility problem between my laptop bluetooth drivers and P3600 ones.
Anyway thanks for your help, I'll keep on trying...
Probably you can init a sync from PC, but the one I tried is to initialize a sync from my PPC. Once you have AS to use serial of your BT, then while discovering services (or pairing) from you PPC, your PPC should show that there is AS service on the PC. Start your AS on your PPC and sync.
I had a bit of trouble but I've sorted it out now, this is what I did:
1. Uninstall any bundled software and drivers that came with your dongle.
2. Stick the dongle in, and let Windows automatically install the drivers.
3. Make your PC "discoverable" through the bluetooth control panel.
4. Create an incoming port, and take note of the port number
5. In ActiveSync on your PC, go to connection settings and enable a connection through that port.
5. On your phone, go to ActiveSync and select "connect via bluetooth"
6. It will say that you need to establish a partnership or something, press ok, and find your PC, when the services dialogue comes up, select "ActiveSync".
7. Try pressing connect via bluetooth again and it should work!
El_Mariachi said:
I had a bit of trouble but I've sorted it out now, this is what I did:
1. Uninstall any bundled software and drivers that came with your dongle.
2. Stick the dongle in, and let Windows automatically install the drivers.
3. Make your PC "discoverable" through the bluetooth control panel.
4. Create an incoming port, and take note of the port number
5. In ActiveSync on your PC, go to connection settings and enable a connection through that port.
5. On your phone, go to ActiveSync and select "connect via bluetooth"
6. It will say that you need to establish a partnership or something, press ok, and find your PC, when the services dialogue comes up, select "ActiveSync".
7. Try pressing connect via bluetooth again and it should work!
Click to expand...
Click to collapse
Can anyone please tell me why i dont see any services on my P3600 after i am connected to the PC? I used to do this with my Prophet (same laptop) without any problems but the P3600 is not able to see any services.
i use this settings
http://www.htcwiki.com/page/activesync+via+bluetooth
it's work for me.
MrTW said:
Can anyone please tell me why i dont see any services on my P3600 after i am connected to the PC? I used to do this with my Prophet (same laptop) without any problems but the P3600 is not able to see any services.
Click to expand...
Click to collapse
Same here... Active sync does start and tries to connect when pairing... but it times out and the activesync service is not seen as an option on the ppc.
Julioski said:
Hi everybody,
I'm trying to sync my trinity with a laptop using bluetooth, but it seems imposible 'til now. Has anybody been able to?
It seems there's not pim service on the p3600, also creating a com connection doesn't work...
Any idea or howto???
Thanks in advance.
Click to expand...
Click to collapse
Hi
What kind of software are you using microsoft widcomm or bluesoleil.
I can't connect ASync via Bluetooth.
I have Qtek S100 with Imate ROM
ActiveSync version 4.5
and bluetooth adapter (noname) but everything else (sending and recieving files) working OK!
When i go to "Bluetooth settings" and press Start there is
"Please start bonding with other device which supports serial port or ASync profile as ASync parthner"
when i go to New Outgoing Port there are no ports to choose
also for Incoming Port
When i go to Active Sync and Tools and Connect via Bluetooth it stucks on "Conneting to HOST - Cancel - Hide Status" and does nothing....
Bluetooth icon becomes green and it wrote "Connected COM6" but Active Sync still does nothing...
Help
make sure all com ports are the same....
buddy i hav same problem...........still no solution..i hav tried it through all possible wats n got only one solution bt it's not cool............just refresh ur sync via bluetooth......n then after tht dont shutdown ur pc.....just hibernate...........patnership lost after restart n stucks on connecting to host..try it............tell me if it helps to u.....Ur buddy UMAIR
I had the same problem. I knew that I was communication with the laptop since I had to exchange pin numbers, however I could not get activesync to work. Turned out to be a problem with my McAfee firewall. I uninstalled the firewall and everything functioned as expected. I'd like to offer a more technical solution but I can't. I reinstalled the firewall and everything is working fine now. Good Luck
You guys just have to findout that the bluetooth is using which COM port for the connection, (my bluetooth using com 6), once you found the Com port just open your ActiveSync -> Goto file -> Connection setting -> Allow Connection to One of the following -> set the COM port, and then try to connect again.
See the attached Picture please.
Let me know please.
Sid
see this thread http://forum.xda-developers.com/showthread.php?t=249219
install the bluetooth stack
but you have to configure the activesync port as in the pict above I always put port number 3 and it works
-activesync 4.5
-bluesoleil http://www.4shared.com/file/50972099/8e22caaf/IVT_BlueSoleil_602270_for_32bit_OS.html?s=1
that's how I fixed the problem after I upgraded to the latest radio and rom verion