Related
Dear all, is that possible to activesync mini and pc without USB? Whenever using usb to sync, mini will be charged. Can i prevent this auto charging problem coz lets say the battery in my mini is always full, will it do any harm when it keep charging whenever we activesync? If we can activesync using BT, what is the procedure?
Just go to bluetooth settings and do activesync setup. you will need to re pair your PC. works really well.
rmg, what do u mean by repair the pc, can u provide me with more details and step on doing this, appreciate your help thanks
rmg, i did what u told me, but when i click start button on the "bluetooth activesync setup:" the message box come out "please start bounding with other bluetooth device which support serial port or activesync profile as your activesync partner". i cannot get it done, can u help
how i do is it
1) bond PC and Phone in Bluetooth Settings in windows
2) on phone go to Activesync - tools - Options - Options - Dropdown box
Eather Bluetooth or 19200 default
3)Open active sync pc
4) Active Sync on Phone - Tools - Connect Via Bluetooth
and that is how i connect
In the advanced settings for your BT dongle you will need to check what Bluetooth Serial port number is being used. I found mine under local services. Once you have that go into the proerties for AS and where it lists the serial port to use put the COM Port number of your BT Serial port in that box. Now when you hit the AS button they should be able to connect with each other. Hope that helps.
One of the requirements is for you to have a ActiveSync 3.8.
Once you have that installed a new port will also be installed with the Windows BT stack. When the BT stack is detected a new port will also be available.
Now the next step is to go to the PPC. Hit Start go to Settings, System and then Blue Tooth Settings. Hit the Start button and it should bring you to the BT activation where you turn it on. Have everything checked. Once this is done, start pairing the laptop by having it detect the PPC and set a passkey for protection. Once they are paired, launch ActiveSync in the PC and go to File and Connection Settings. Once in this screen pit a check mark on the Allow Serial... Set it to the new port set by your BT Stack.
Once this is done, on the PPC, hit Start and go to Programs select ActiveSync. Hit Tools and then Connect via Bluetooth. This should then start working.
One bug I did find is that once you connect your device to your charger and initialize the ActiveSync over BT everything will work well. BUt once you remove it from the power conenction, your device will soft reset.
ok i will try, thanks to all of you
Stupid Q. If you're using BT for Activesync, the PC will still act like a pass-thru internet gateway, right? And you can now surf the net via BT (the same way you do it with wifi)?
Thanks.
@MC_Oliver
The answer is yes. If you are doing ActiveSync over Bluetooth it is the same as ActiveSync with a cable. You should have the same icon on the top of your screen. You can even browsse the files in your PPC.
Thanks dre.
Btw, curious if you have the same problem as I do in this thread? Thanks again.
mc_oliver said:
Stupid Q. If you're using BT for Activesync, the PC will still act like a pass-thru internet gateway, right? And you can now surf the net via BT (the same way you do it with wifi)?
Thanks.
Click to expand...
Click to collapse
Is my question stupid? sorry about that coz i am new
mouse said:
Is my question stupid? sorry about that coz i am new
Click to expand...
Click to collapse
No, not at all. I cut my sentence short and it should have read; I have a stupid question. Sorry for the misunderstanding.
I have set up a bluetooth sync on my VARIO on Comm Port 4 so i can synchronize using Active Syc 4.1.
Whenever i decide i want to use my USB cable instead of bluetooth so that i can charge the device at the same time it removes my COM4 port from Activesync so that when i next try to connect by bluetooth it wont work.
How do i fix this problem????
Also where do i download LOKIWIZ and is it worth using and if i have problems with it will a Hard Boot remove it???
I've bought today a Qtek S200.
IPL/SPL: 2.09.0000
GSM: 2.07.20
OS: 2.9.7.28
The first I did was a Hard Reset to the Qtek S200 and then...
Because of the problems with some application and antivirus I did a complete format to my computer. I just installed WinXP PRO SP2, all the updates from Microsoft Update, .Net Framework 3, Outlook 2002 and ActiveSync 4.1 (both came in the CD from Qtek). (I have also disabled Windows Firewall).
Then I think, I've done all the steps right (I think):
1) I connected the USB cable to de PC
2) I tried to plug the USB cable to the Qtek S200 when te PPC was OFF and nothing happened. Then with the Qtek S200 ON (in today's screen) I plug the other side of the USB cable and ActiveSync does not recognize my S200.
I dunno what to do to make ActiveSync syncronize with my Qtek S200, could you please help me???? I've been trying to syncronize for more then 6 hours (doing all the stuff...)
THNX,
Annita
Try this:
remove your activesync (de-install the software)
reboot your pc
turn on your qtek without the usb cable attached
plugin your qtek on the usb cable.
Does you pc find the device ?? (ding dong sound)
yes ? good, your pc finds it.
take out the usb again
install activesync 4.2
http://www.microsoft.com/windowsmobile/activesync/activesync42.mspx
try again, and see if it works.
My PC does nothing when I connect the S200...
Annita
If the USB cable connection does not work, it is possible to update ROM via Bluetooth ActiveSync syncronization????
THNX,
Annita
Annita said:
If the USB cable connection does not work, it is possible to update ROM via Bluetooth ActiveSync syncronization????
THNX,
Annita
Click to expand...
Click to collapse
It might work, however I would first look into why you usb doesn't work
when you plugin the usb cable, do you see the phone charge ? (led ontop change to orange) you might have a bad cable or you pc has a problem with the usb port (have your tried another usb port ? or removing all usb devices and only using the phone cable ?)
Yes to all.
When I connect the USB cable, the Qtek begins to charge the battery, and the orange led flicks.
I have tried on my PC and on my Laptop and didn't work in any of both.
I have tried with only he USB phone cable and did not work either.
Anyone has tried to update ROM via Bluetooth???
THNX,
Annita
Annita, make sure you have DHCP turned on on your PC. The virtual USB NIC should come up as 169.254.2.2, I believe. I was never able to get it to work without using DHCP on the PC side.
What is the virtual USB NIC????
Annita
When you plug in the USB cable, the PC creates a "fake" network adapter for the PPC and adds that to your list of network connections.
Just make sure DHCP service is started. Right-click My Computer -> Manage -> Services and Applications -> Services -> DHCP Client.
OK, the service was and is ON.
The thing is that I can syncronize via Bluetooth, but not with the USB cable (and I have the original cable and another mini-USB cable).
Annita
Bluetooth Activesync Sycronization will not work b'coz while upgrading, the phone resets itself, N it powers on in the upgrade process therefore, bluetooth of the phone will not be available then.
So, I dont its possible 2upgrade via bluetooth Activesync.
OK, thnx.
Annita
anita and the usb
anita, go to start setting control pannel, go to phones and modems and see the modems are installed there. windows (sh***t) store all the garbadge possible. can be that it identfy usb device like usb modem and put it on com 1 not that active sync works auto on com1. so check connection settings on activesync. + which use port you use? fron pannel or the rear of the PC?
is that a laptop if yes what model.
i'll try to help as much as i can
xman
ok, i have the same problem as you do, or at least a similar. i cant get my sync to work...
active sync 4.2
active sync says "critical communication error, try restarting your device", the active sync troubleshoot tells me that i dont have a ip adress (the link to microsoft does not work), although i have a network connection that my pc created (169.254.2.2). the active sync even appears in green.
my firewall and the win firewall does not interfere with this. switching off the firewalls does not improve this at all.
does anyone know a solution to this? thanks
I'll try what xmanmaster says, but I'm not at home until sunday...
Thnx,
Annita
Did this problem ever get resolved? I have the same issues, tried a wizard and a hermes. Not detected as a usb device, the charging light comes on. Both phones work on another PC. I have tried uninstalling activesync and rebooting phone/PC in every order I can think of.
UPNP (Universal Plug 'n Play) service is required
Hi all,
please make sure that the UPNP service is running on the desktop.
It's required for device detection as well as synchronisation with the WCE device.
A quite detailed description of all potential problems with ActiveSync can be found at Chris De Herrera's website.
BR,
N.a.D.
Hi everybody,
I'm trying to sync my trinity with a laptop using bluetooth, but it seems imposible 'til now. Has anybody been able to?
It seems there's not pim service on the p3600, also creating a com connection doesn't work...
Any idea or howto???
Thanks in advance.
You'll need to set up your ActiveSync (AS) in your PC to point to the port which your Bluet is using. After that, use your phone to 'discover' your PC and you should have AS service for your Bt in PC.
You mean...
In Bluetooth configuration on the pc I have COM9 assigned to bluetooth Serial Port and COM8 for ActiveSync. So you say I have to set as incoming serial port COM8 in P3600??
Configure the AS to use COM9 (in your case).
Thanks
But still no luck, it seems to be connected but activesync says there's no device in that port, I'm afraid it's a compatibility problem between my laptop bluetooth drivers and P3600 ones.
Anyway thanks for your help, I'll keep on trying...
Probably you can init a sync from PC, but the one I tried is to initialize a sync from my PPC. Once you have AS to use serial of your BT, then while discovering services (or pairing) from you PPC, your PPC should show that there is AS service on the PC. Start your AS on your PPC and sync.
I had a bit of trouble but I've sorted it out now, this is what I did:
1. Uninstall any bundled software and drivers that came with your dongle.
2. Stick the dongle in, and let Windows automatically install the drivers.
3. Make your PC "discoverable" through the bluetooth control panel.
4. Create an incoming port, and take note of the port number
5. In ActiveSync on your PC, go to connection settings and enable a connection through that port.
5. On your phone, go to ActiveSync and select "connect via bluetooth"
6. It will say that you need to establish a partnership or something, press ok, and find your PC, when the services dialogue comes up, select "ActiveSync".
7. Try pressing connect via bluetooth again and it should work!
El_Mariachi said:
I had a bit of trouble but I've sorted it out now, this is what I did:
1. Uninstall any bundled software and drivers that came with your dongle.
2. Stick the dongle in, and let Windows automatically install the drivers.
3. Make your PC "discoverable" through the bluetooth control panel.
4. Create an incoming port, and take note of the port number
5. In ActiveSync on your PC, go to connection settings and enable a connection through that port.
5. On your phone, go to ActiveSync and select "connect via bluetooth"
6. It will say that you need to establish a partnership or something, press ok, and find your PC, when the services dialogue comes up, select "ActiveSync".
7. Try pressing connect via bluetooth again and it should work!
Click to expand...
Click to collapse
Can anyone please tell me why i dont see any services on my P3600 after i am connected to the PC? I used to do this with my Prophet (same laptop) without any problems but the P3600 is not able to see any services.
i use this settings
http://www.htcwiki.com/page/activesync+via+bluetooth
it's work for me.
MrTW said:
Can anyone please tell me why i dont see any services on my P3600 after i am connected to the PC? I used to do this with my Prophet (same laptop) without any problems but the P3600 is not able to see any services.
Click to expand...
Click to collapse
Same here... Active sync does start and tries to connect when pairing... but it times out and the activesync service is not seen as an option on the ppc.
Julioski said:
Hi everybody,
I'm trying to sync my trinity with a laptop using bluetooth, but it seems imposible 'til now. Has anybody been able to?
It seems there's not pim service on the p3600, also creating a com connection doesn't work...
Any idea or howto???
Thanks in advance.
Click to expand...
Click to collapse
Hi
What kind of software are you using microsoft widcomm or bluesoleil.
I can't connect ASync via Bluetooth.
I have Qtek S100 with Imate ROM
ActiveSync version 4.5
and bluetooth adapter (noname) but everything else (sending and recieving files) working OK!
When i go to "Bluetooth settings" and press Start there is
"Please start bonding with other device which supports serial port or ASync profile as ASync parthner"
when i go to New Outgoing Port there are no ports to choose
also for Incoming Port
When i go to Active Sync and Tools and Connect via Bluetooth it stucks on "Conneting to HOST - Cancel - Hide Status" and does nothing....
Bluetooth icon becomes green and it wrote "Connected COM6" but Active Sync still does nothing...
Help
make sure all com ports are the same....
buddy i hav same problem...........still no solution..i hav tried it through all possible wats n got only one solution bt it's not cool............just refresh ur sync via bluetooth......n then after tht dont shutdown ur pc.....just hibernate...........patnership lost after restart n stucks on connecting to host..try it............tell me if it helps to u.....Ur buddy UMAIR
I had the same problem. I knew that I was communication with the laptop since I had to exchange pin numbers, however I could not get activesync to work. Turned out to be a problem with my McAfee firewall. I uninstalled the firewall and everything functioned as expected. I'd like to offer a more technical solution but I can't. I reinstalled the firewall and everything is working fine now. Good Luck
You guys just have to findout that the bluetooth is using which COM port for the connection, (my bluetooth using com 6), once you found the Com port just open your ActiveSync -> Goto file -> Connection setting -> Allow Connection to One of the following -> set the COM port, and then try to connect again.
See the attached Picture please.
Let me know please.
Sid
see this thread http://forum.xda-developers.com/showthread.php?t=249219
install the bluetooth stack
but you have to configure the activesync port as in the pict above I always put port number 3 and it works
-activesync 4.5
-bluesoleil http://www.4shared.com/file/50972099/8e22caaf/IVT_BlueSoleil_602270_for_32bit_OS.html?s=1
that's how I fixed the problem after I upgraded to the latest radio and rom verion