I currently own Qtek 9100 with Qtek's ROM. The problem I discovered is that the device doesn't recognize phone number by 7 last digits. For example now in Russian several area codes were changed, but when someone calls me from a network with old ID, my device doesn't recognize it.
Also smartdialing works strange - if i start entering a number without code it doesn't recognize it until i press dial
Any ideas?
Related
I've just had my number ported, but the Universal is still showing the old number under Start > Settings > Phone
Where does it get that number from and how can I change it to the correct number?
On my MDA PRO there is a sim manager app in the contacts folder, you start that and from the menu show your own numbers and edit it there. If your O2 rom doesn't have a sim manager then you 'll either have to flash with another operator's ROM which does or put your sim into another phone that can access the SIM and edit your own number. You may get away with calling O2's CS and asking them to send you a SIM update which will change to the old number for you automatically, not sure if the universal can do this though.
Your pre-port number is stored on your SIM and will always be there. Just ignore it, but the reason is this...
When you port number 1 from network A over to network B, to replace number 2, number 2 will always be your main number. Network A will always own number 1, even though they have given it to network B for you to use instead of number 2. Even if people call your number 2 (which has been of course replaced with number 1), they will still get through to you. And, when people call you on number 1, the call is routed through network A, before it goes through network B, who in turn connect it to the subscription they have on their system as number 2.
I know there's probably an easier way of explaining it, but it's very late, so sorry if the above sounds a bit daft. It is true though.
:lol: no, that makes sense, thanks
Just having a look through my old posts and came across this one. Don't know how it works in Ireland but seems to be different here. Every time I've ported, the number that was being replaced has been switched off, i.e. if you were to call it then you get the "You have dialled incorrectly please try again" or similar error. As far as I know you're not identified to the network by a phone number stored on a SIM card, but by a unique code on the SIM, when someone calls you the call gets routed by the prefix of the ported number to your old operator, who then forward it to whoever they ported it to. Your present operator when they receive the call then check the phone number against their list of numbers and connect the call to the SIM code that the number is registered to. As I said in my post you can change the phone number that is stored on your SIM card using SIM manager on the universal, as I have done on mine, and if you were to put the SIM into a different phone it would still recognise the numbr change and report your number as your ported one.
Bit of a long post but in essence saying that the pre port number doesn't need to stay on your phone, you'll still get calls to your new number.
PC_Arcade said:
I've just had my number ported, but the Universal is still showing the old number under Start > Settings > Phone
Where does it get that number from and how can I change it to the correct number?
Click to expand...
Click to collapse
This is an easy one to fix:
Start > Programs > SIM Manager
Tools > List of Own Numbers
Change LINE 1 (which I think you'll find is your old number) to the new one you've had ported.
You should now find that the phone app reports the correct number
I have succefully configured VOIP on my HTC cruise but cannot dial out. it seems that the problems is the phone number format. if i dial for example 555789456 when i press send the phone will automatically reformat the number to (555) 789-456 and i think that the problem comes from the ( ) and the dash - .
does anyone know how can i disable the phone number reformatting ?
Hello,
I have a HTC Touch Diamond 2 bought 2 months ago. There is a problem that only occurred recently (worked fine before, so I might have configured the settings incorrectly)
Problem:
My contacts are stored inside the sim card. Before when my friends called their name would display on the screen. The problem now is when they call me (their numbers are all already stored in the sim card) only their number is displayed on the screen and no name, and I would have no idea who is calling if I don't recognize the numbers.
the odd thing is if i check my call history afterwards, the names come back up. so it is only not showing when it is ringing
this isn't one of those area code problems, my area doesn't use the area code during calls (hong kong), so adding the area code in my contact list doesn't solve the problem
Is there a way to fix this problem?
Thank you.
in advanced config>phone set caller id to 8 & reset.
I had a similar problem a while back. The only thing that solved my problem was a hard reset.
maybe this helps..are you using activesync?
http://forum.xda-developers.com/showthread.php?t=566158
call ID problems??
this should resolve your issue, HTC website
http://www.htc.com/uk/SupportDownload.aspx?p_id=249&cat=0&dl_id=673
well I live in Egypt and my operator is Mobinil.
Mobinil's customer service number is 110, in winmo it worked just fine (and from aaany other device in Egypt obviously), but in android when i dial 110 it recognizes it as an emergency number
is there any solution? this is a really annoying bug
any help guys...?
Probably since almost every (if not every) emergency number only has 3 digits (eg. 911, 112).
Your operator probably pre installed the 110 number to be redirected to their customer number (which is a normal phone number I guess). And probably in android it doesn't auto redirect to this number.
Workaround would be to save their normal customer number to your sim and dial that one instead.
Hi, i recently portde my old number when i moved from t-mobile to three uk, and although it's worked fine, i.e. if i call my number which was originally on t-mobile), my phone rings. and if i call out, people see the correct number. text messages and the like also work fine. but in the settings menu, under device status, it shows the unused three uk number that was the original number of the sim i'm now using. also this unused number is diplayed in kies. is there any way to fix this so that it shows my actual number again?
I have the same issue.
Sent from my GT-I9505 using Tapatalk