I have succefully configured VOIP on my HTC cruise but cannot dial out. it seems that the problems is the phone number format. if i dial for example 555789456 when i press send the phone will automatically reformat the number to (555) 789-456 and i think that the problem comes from the ( ) and the dash - .
does anyone know how can i disable the phone number reformatting ?
Related
I currently own Qtek 9100 with Qtek's ROM. The problem I discovered is that the device doesn't recognize phone number by 7 last digits. For example now in Russian several area codes were changed, but when someone calls me from a network with old ID, my device doesn't recognize it.
Also smartdialing works strange - if i start entering a number without code it doesn't recognize it until i press dial
Any ideas?
It is impossible to transfer a received call on the GSM. Normally it is possible to put the first call in hold, dial a second number and then transfer the first call to the dialled number.
This functionnality is not included in my GSM - TYTN
Did someone already try this ?
jpalexander said:
It is impossible to transfer a received call on the GSM. Normally it is possible to put the first call in hold, dial a second number and then transfer the first call to the dialled number.
This functionnality is not included in my GSM - TYTN
Did someone already try this ?
Click to expand...
Click to collapse
someone?
Really I need it...
Thanks
I bought VC 1.6 to use with a Cingular 8525. I was prepared to cope with the BT headset issue, but ran into another problem.
When I try a voice dial using a contact entry, the program finds the contact and specific number without any problem. However, it does not dial the number. I have to press the Enter part of the D ring, The contact closes after a few seconds if I don't.
The phone dials fine if I speak a phone number instead of a contact entry.
Has anybody else seen this problem. Any ideas?
Thanks.
It should repeat what you said to confirm that this is the number you want to dial. Say "Yes", and it should dial for you.
donb said:
I bought VC 1.6 to use with a Cingular 8525. I was prepared to cope with the BT headset issue, but ran into another problem.
When I try a voice dial using a contact entry, the program finds the contact and specific number without any problem. However, it does not dial the number. I have to press the Enter part of the D ring, The contact closes after a few seconds if I don't.
The phone dials fine if I speak a phone number instead of a contact entry.
Has anybody else seen this problem. Any ideas?
Thanks.
Click to expand...
Click to collapse
If you are unable to resolve this problem, try uninstalling and reinstalling.
Make sure that when you reboot after installing that you don't pull the battery to do it. The registry may not be flushed to the NAND if you take this approach and it may result in an incorrect installation.
A second unin-reinstall did the trick.
Thanks.
Well i'v unlocked my htc mytouch 3g
everything works great except for one problem
the diale is being thick
I can receive calls , i can send SMS, i can get SMS
but when i try to dial it rewrites the number from
+370XXXYYZZZ to 370-XXX-YYZZZ , tries dialing it and then it comes up as
"the number you're trying to reach doesn't exist"
has it something to do with the locale ? can i fix it ?
I have upgraded to kk 4.4.4, Since I upgrade I have problem to select options using dial pad. From contacts or using dial entering nos in dial pad I can make calls but like when I need to call customer support I can dial there no and connects but when computer gives options like press 1 for voice mail 2 to someone at that time when press nos at dial pad does nothing. I can hear key tone pressed but doesn't select in their options. I can't even listen my voice mail. when dial voice mail it connection and when gives options keypad press high lights and key tone sounds but no selection. i have tried changing one hand options and installing other dialing apps like exdialer, rocket dialer nothing working. When used 3rd party dialer just dial pad changes and when at options selection it shows again stock dial pad. And one more thing when I'm talking on phone and if I get second call phone disconnects.
I'm using LYCA Mobile USA with verizon N900V If I use same sim with other phone everything works fine, So I know this is only problem with phone set.
Just I'm having this issue or some one also having this problem. Some has solution please help. Thanks
I Have the Same issue
I purchased the phone from Verizon and i'm using cricket now, i can't access any dial pad option when i dial voicemail or any 1 - 800....... number like for customer care press 0 i press the 0
but the response still say for customer service press zero, i sent the phone to Samsung with my factory warranty but Samsung seems doesn't really care they send me back the phone with no problem fix, and besides that i used to have a dial issue if i call some on from my call log it adds 01117730000000 some like this it seems like the phone is dialing International for local calls but i got fixed that problem. but i need help for the $700.00 phone i paid it's a piece of crap Samsung doesn't really care i would't never purchase a Samsung phone if there warranty services doesn't do noting.