It seems to not work well together. I can't even get it installed or if it installs then it doesn't open at all. I had it installed for a couple of days then stopped working. Crazy.
It works great for me under WM2003!
Try deleting it then do a fresh install also make sure you're using the latest version?
Note: Prior to reinstall use File Explore to look around in both main memory & storage card to make sure every reference of it has been removed.
HTH
That's what I ened up doing...
It turned out that the problem was with my SD card. For some reason it was showing that it was full when there was over 230MB free on it. I had to reformat the disk.
Anyway, all is well now...
Hi all,
i have a fresh JasJar and i need to install the .Net Compact Framework 2.0 but when i try to install (main memory) it gives me an unknow error number 4.
I have a lot of free space in my device, approx 30 Mb, so where is the problem ?
I need the .Net Compact Framework to run IBE Mail.
Bye
nicoska
Me too. I've tried closing applications, but without luck
RE
Using ActiveSync may give problem. I installed using the cab file method
You can get the cab file ffrom here (near to the bottom)
http://www.gopherking.com/download/
If you cannot install try install WiFiFoFum with the CF installer Package. After that remove WiFiFoFum (if not needed) and you'll have the CF left behind
http://www.aspecto-software.com/xoops/modules/wfdownloads/newlist.php
Why install it in the main memory? I installed it to my SD Card and it went without any problems.
cktlcmd said:
Why install it in the main memory? I installed it to my SD Card and it went without any problems.
Click to expand...
Click to collapse
Hi,
did you installed by .cab file or trough ActiveSync ?
thanks
Nico
nicoska said:
cktlcmd said:
Why install it in the main memory? I installed it to my SD Card and it went without any problems.
Click to expand...
Click to collapse
Hi,
did you installed by .cab file or trough ActiveSync ?
thanks
Nico
Click to expand...
Click to collapse
I used the .exe file through active sync. I had reformatted my computer, I had performed hard resets numerous times on my EXEC and Net Framework 2 always installs without any problem to my SD Card and works very well.
cktlcmd said:
Why install it in the main memory? I installed it to my SD Card and it went without any problems.
Click to expand...
Click to collapse
Are you sure it's actually on the SD card?
I tried telling it to install to SD-card three times (uninstalled between each attempt) and practically nothing went onto the SD card - it just created an empty folder there. :roll: Took out over 5-MegaByte of main memory though and didn't recover all of that when it was removed! :evil:
astage said:
cktlcmd said:
Why install it in the main memory? I installed it to my SD Card and it went without any problems.
Click to expand...
Click to collapse
Are you sure it's actually on the SD card?
I tried telling it to install to SD-card three times (uninstalled between each attempt) and practically nothing went onto the SD card - it just created an empty folder there. :roll: Took out over 5-MegaByte of main memory though and didn't recover all of that when it was removed! :evil:
Click to expand...
Click to collapse
YES, I explored my SD Card and it has a folder named NetFrame2 or something like that under Windows>Programs
I did not loose any internal memory. As of now after a soft reset, I have about 32MB of internal memory with 31 different applications installed. 26 applications installed to my SD Card and 5 system applications installed on my internal memory. No freezes, no delays, no missed calls, no loss of system preferences, switching from landscape to portrait or vice versa takes 1 second, so I am pleased with my settings.
YES, I explored my SD Card and it has a folder named NetFrame2 or something like that under Windows>Programs
Click to expand...
Click to collapse
So did mine, but the folder was empty :?
astage said:
So did mine, but the folder was empty :?
Click to expand...
Click to collapse
I didn't actually clicked on the folder, I'll have to check that the next time I sync. I just assumed it was installed there.
cktlcmd said:
astage said:
So did mine, but the folder was empty :?
Click to expand...
Click to collapse
I didn't actually clicked on the folder, I'll have to check that the next time I sync. I just assumed it was installed there.
Click to expand...
Click to collapse
I hope you're lucky and it worked for you!
Might be worth checking the \Windows folder, however, as that's where I found all the .Net v.2 stuff dumped. The .Net v.1.x stuff is in ROM, so I'm hoping that a future ROM update will have v.2 in ROM.
Pants - just noticed that CF2 folder on SD card is empty!
Any solution to this?
Cheers,
Steve
(Am using Opera - apologies for double spaces)
I've looked into this a bit further, and according to the guys at Microsoft http://blogs.msdn.com/netcfteam/default.aspx - the Framework will always take up storage space, and it wouldn't work if it were only installed on the SD card.
Let's hope that a future ROM release will include it.
Cheers,
Steve.
Here is what I noticed on mine. I just performed a hard reset. I started out with 31MB internal memory. I opted to store NetFramework to my SD Card which is around 5MB in size. So if what you guys claim that NetFrameWork does not install to the card is true, it should eat up the 31MB internal memory right? But I still end up with 31MB internal memory after the install. I did check my SD Card and found the folder there which is empty if I clicked on it. But, my SD Card has less memory than I started with, close to 5MB. So my conclusion is: It installs to the SD Card but maybe active sync does not allow us to see the actual file and size, so it appears the folder is empty.
According to what Microsoft say:
Installing NETCF V2 to storage card
While it is technically possible to redirect installation of NETCF onto storage card via standard Active Sync/WCELOD capabilities, it won’t save precious RAM on device. NETCF files have to be in \Windows folder in order for NETCF to function properly.
If NETCF is installed to storage card, NETCF files will be initially deployed to it. However, at some point they would moved to \Windows folder taking out exactly the same space as normal installation would.
In some cases attempt to use storage card would lead to installation failure due to some subtle storage card issues. Thus it’s not recommended to install NETCF V2 to storage card or embedded storage and there are no benefits of doing so.
Click to expand...
Click to collapse
So try installing WifiFoFum (or another .Net CF2 app) and see how your memory availability alters.
Cheers,
Steve.
I also use WiFIFoFum and stored it to my card. It works great. After use of WiFiFoFum, my Internal Memory goes down to about 27MB, I already expected that. Closing all applications via settings puts my internal memory to about 29MB, also expected that as Windows Mobile 5 leaves some parts of the application open for faster reference the next time you open it up. After performing a soft reset my Internal Memory goes back to 31MB. So this still does not change my conclusion that NetFrameWork 2 was installed to my SD Card.
I had a problem installing .NET 2.0 and I found that if I rename/remove previous attempted installs (eg, the dir and files), my 2nd attempt is usually successful.
This goes for most any program that doesn't install properly. I've noticed that this usually happens to me after an upgrade of the same app.
cktlcmd said:
I also use WiFIFoFum and stored it to my card. It works great. After use of WiFiFoFum, my Internal Memory goes down to about 27MB, I already expected that. Closing all applications via settings puts my internal memory to about 29MB, also expected that as Windows Mobile 5 leaves some parts of the application open for faster reference the next time you open it up. After performing a soft reset my Internal Memory goes back to 31MB. So this still does not change my conclusion that NetFrameWork 2 was installed to my SD Card.
Click to expand...
Click to collapse
Are you talking about "Program" memory? I'm talking about "Storage" memory - I don't think that's affected when you open/close applications or perform soft resets...
Cheers,
Steve.
StevePritchard said:
Are you talking about "Program" memory? I'm talking about "Storage" memory - I don't think that's affected when you open/close applications or perform soft resets...
Cheers,
Steve.
Click to expand...
Click to collapse
Ohhhhhhh! My mistake.
Cheers mate!
FOSA said:
Using ActiveSync may give problem. I installed using the cab file method
You can get the cab file ffrom here (near to the bottom)
http://www.gopherking.com/download/
If you cannot install try install WiFiFoFum with the CF installer Package. After that remove WiFiFoFum (if not needed) and you'll have the CF left behind
http://www.aspecto-software.com/xoops/modules/wfdownloads/newlist.php
Click to expand...
Click to collapse
Great that worked for me!! Many thanks!!
J
Simple question - I just wanted to know if I can download the framework onto my storage card or if I have to download it to the device. The 20mb size of the file really makes me think twice before doing it.
The .Net Compact framework 2.0 (i guess this is the one you're installing since 1.1 is included in the rom) cannot be installed in your sd card (actually you can install it on your sd but after the first run, the program will be moved to main storage).
Two good news:
- CF 2.0 won't take 20mb of your storage, 'only' 5.4mb (even if the exe is 20mb)
- it is possible to manually relocate the framework to your sd card, follow this guide: http://www.pocketpcmag.com/blogs/index.php?blog=3&p=757&more=1&c=1&tb=1&pb=1#more757
Bye,
Isidoro
PS: since you're using a wm5.0 device why would you like relocating the framework?
Is there any way I can make Windows detect or recognize programs on the storage card after a rom update? without having to reinstall them again..?
thanks!
of course you cant, you have to install them once again.
depends, if it will run from the storage card simply make new shortcuts, depends how many u have to do and how easy to hand the cab files are i guess
i usually keep all my cab files in a "cabs" folder on my sd card incase i need to redo my phone if i'm away from my pc. it helps if i'm at work and it starts acting up.
It also might not be a bad idea to keep a backup of your wizard on the sd card with just the programs (and if you havean exchange server) already installed on it, that way a quick, fresh start doesn't involve a lot of work.
contentryder said:
Is there any way I can make Windows detect or recognize programs on the storage card after a rom update? without having to reinstall them again..?
thanks!
Click to expand...
Click to collapse
Any program on the storage card will run after the ROM update as long as it is not one that needs to write registry changes or dll's to the registry itself.
I have approximately 50 apps installed to my storage card. After doing a ROM flash/upgrade, I only have to reinstall around 10 of them. You'll just need to try launching each one from the card to see if it will work without reinstalling to find out which ones will work and which ones won't.
well i wanted to know because i just recently upgraded to nbd 7.0 and some programs i want isnt detecting in htc home plugin...
I have installed HTC Kaizer Home Plugin, HTC X-Button, HTC Audio Manager, JUVS CommMgr6 button, reTouched Dialer, etc.
These applications I installed in the Storage Card.
I notice when i start my HTC Softbank X01HT, it become slower... until I have run most of the application, then only the speed become more stable.
So, I wondering I should install these applications into Main Memory or Storage Card? Will it be more stable if I install into Main Memory?
i just think that every app you installing tooks a small part of your hermes memory.... so as many startup application you have as you hermes will slow down
understand that.
what i worried is if i install those applications into storage card, it will load slower than if i install into the main memory.
will this happen?
wailoon said:
understand that.
what i worried is if i install those applications into storage card, it will load slower than if i install into the main memory.
will this happen?
Click to expand...
Click to collapse
No, not really - except you turn off or soft reset your device entirely, then it takes a while until your pda read out all contens on SD card - other than that they load as fast as installing in the phone. I always install my apps on SD, except for system application, never had any problems.
It's my understanding that you should install programs that run on startup, like today plugins, into main memory.
This is so that if the programs are called to run before the storage card is initialized they are available.
I believe it was MikeChannon that said this...
intrglctcrevfnk said:
It's my understanding that you should install programs that run on startup, like today plugins, into main memory.
This is so that if the programs are called to run before the storage card is initialized they are available.
I believe it was MikeChannon that said this...
Click to expand...
Click to collapse
Yeah, might be a good advice even though I never install in phome memory as long as I can avoid it. But you shouldn't take me as good example anyway (I never had issues with installing everything on SD card but I might have been only lucky up to now!)
How about this solution?:
Try to install your application on SD card first! If they do not run properly after starting up your phone then just uninstall them and reinstall them in your phone memory ...
The only 3 programs I installed in phone memory are:
SPB MOBILE SHELL (It won't install on SD)
RESCO EXPLORER 2007 (to be able to use Explorer, REGISTRY PLUGIN and FTP even when I switch SD cards or card fails)
Microsoft Reader (because of activation)