I was upgrading using sd card and took out the card while upgrading and the machiine does not boot. I treid soft reset, hard reset, took the battery out, and reset it.
No luck.
Any time I do a hard reset - i can see the red light blink. It charges fine.
Any help please
Why did you remove the SD-Card while your upgrade was running? :?:
I think this was avery bad idea.
If you aren´t able to get into the bootloader and reflash your device again, you have won a high quality paperweight....
I´m sorry, but i think there is no usable solution to realive your device....
Stefan
Related
my xda sx56 doesnt boot or load the bootloader or the rom, and neither recognize windows when i connect it to the base
sx56 upgrading - cannot boot - dead - need help
I was upgrading using sd card and took out the card while upgrading and the machiine does not boot. I treid soft reset, hard reset, took the battery out, and reset it.
No luck.
Any time I do a hard reset - i can see the red light blink. It charges fine.
Any help please
Doing the upgrade it stop and now ...
Doing the upgrade it stop and now I cannot get anything but a gray screen. I have soft and hard boot my SX56. I really need help from anyone.
Guys I need some help. My Dopod 818 pro died today. I don't know what happened. It wont start or soft reset or even hard reset. Only thing is it keeps blinking, the screen, the power and bluetooth led. anyone can help me here? Thank you.
Bootloader mode
Some update, I'm able to access the bootloader mode while my set is plugged to the mains. Is there anyway I can flash my rom using sd card?
more details...
more details would b helpful. For example, were u flashing the ROM? Or did it just die suddenly on its own?
Try taking the batt out over night.... or perhaps you didn't do your hard reset properly. You're supposed to press the camera & comm manager button and hold them while you poke the reset hole...
Try taking out your SIM card and hard reset.... if all fails, you probably have fried board.
If you are able to access bootloader mode, then you should be able to flash the ROM using a ROM provided by Dopod.
Mains only
Yup my friend tried to flash the rom for me and he messed it up. he flashed the wrong rom. i can't reflash tru usb because i only can get to bootloader when connected to the mains.
Re: Mains only
rattler79 said:
Yup my friend tried to flash the rom for me and he messed it up. he flashed the wrong rom.
Click to expand...
Click to collapse
http://forum.xda-developers.com/viewtopic.php?t=41517
The problem is that i can't turn it on. only on mains
If it died while flashing, then as DILS said, you should be able to reflash it again and again....
Hello all,
I have a problem with my Atom. After performing a soft reset or a hard reset device can't boot up, it stack on "O2" image. To open again the device i have to take out the battery. And this doesn't work with the first time.I have to take out the battery many times. I've updated it with the latest firmware, but i have again the same issue.
Please help me!!
If it won't boot up at all and you have the option of returning it, you might consider that. If you fiddle around with it in this state and you do something that would void your warranty on an already non working device it would be a shame. On the other hand if you have already messed upgrading roms and the like check the forums there must be a way to boot into a bootloader on the Atom and a way to restore it from a backup (I have a Wizard so I'm not too familiar with the Atom, but I'm pretty sure there must be a way to restore it). Remember though if you still have the option return it and get another one. Hope your able to fix this, good luck.
Unfortunately i don't have the option to return it because i bought it used from another person. And if i had the option to do this, it's a little tricky because i live in Greece and it must be returned to Hong Kong!
In that case check the forums there should be some info around there. If I see anything, I'll be sure to let you know.
boot up after a soft reset
Hi there
I faced the same problem and i managed to fix it by booting to bootloader mode and reinstalling the rom.
If you asking how to boot to bootloader mode just press SR button+Cmera
Good luck
masr1979 thank you for your interest!
ZaZuRaZ thanks for the reply! I'll give it a try and i'll post any feedback!
ZaZuRaZ i did what you said, but the problem is still there.
i duno if this will help but i had the same problem before. the thing was when i performed a soft reset it was too quick, thats why the atom froze on the o2 screen. i read the manual and it says you have to press and hold it, so everytime i do a soft reset i hold it for 2 seconds (let the o2 screen flash twice before releasing it) and it should be in off state. works fine now with about 90+ soft resets.
I had same problem... In my case it was from third party software - Softic card export. HR help me solve this problem.
I have the same problem at least 2 times and HR won't even save it. (Take out the battery doesn't work for me either)
Like ZaZuRaZ, I fixed it by booting the Atom in the bootloader mode and re-install the rom.
Isn't that HR should bring the macine to manufacture setting and I really don't understand why HR can't save the machine !!! :evil:
Mine is on the way to Hong Kong for comatose condition :twisted:
I sold my Atom because of this problem.
Now i found one Atom-it's amazing device, maybe the best ppc now-but i'm stuck if i'll buy it or not. I don't want pay too much € again, and still got the same problems.
Dammit, i don't know what to do.
hey...whats the SR button for bootload?
Hi All,
I had this device for few months now after selling off my Eten X500.
The Universal was a big device but I truly loved the XGA big screen. And yesterday disaster struck. Normally sometimes the device would go haywire but a few soft resets or hardreset would set it back on course. But yesterday it refused to move on from the bootloader mode and when I used Buzz utility prgram, it did move away from the bootloader but didn't swith on anyway. And yes, I have flashed the ROM's quite a few times and I managed to flash it with T-Mobile's latest WM5 ROM today morning. The flash was successful but it just wont work normally.
I have 2 batteries but bith yieled the same result. I could only get it to switch on if I hardreset it on a table with 2 fingers firmly pusing the soft keys down. It would sometimes would boot but would hand after it fully loaded. I have removed the SD card as well as the SIM card. Not sure if the devie motherboard is having any issues or some connection problem. One thing for sure if I hold both edges of the device and press it hard and try a soft reset, it would boot sometimes. I even have the external battery charger and I can charger the batteries full.
Any idea how much would it cost (I'm in Singapore) for a repair or anyone who could help me with this.
The worst thing is, this is my only phone and I really need it to work asap.
Hope someone could shed some light on this.
Thank you all in advance.
Techx
Have a look at the wiki...
I had the same problem after I put it on charge with no battery in - very smart I know . It explains about using MTTY and how you format the DOC which should solve your problem - hopefully...
Hi all,
I tried the MTTY utility but I can format the DOC files. everytime I try to format it, I get an error like this :-
USB>set 14 0
HTCSF kEØ(HTCEUSB>task 28 55aa
Wait..
flFormatPhysicalDrive:status=20
Read data error in tag
DOC_format failed!
USB>
So anyone can help in this issue plssssssssssssssss
Thank you all.
Techx
anyone????
Anyone? pls help!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!
Do h3lp!!!!!!!!!!!!!!!!!!!!!!!
Anyway of getting the unit fixed? Anyone from Singapore can recommend a shop or anything?
so i was just trying to charge my phone and the screen gave all these funny characters and the screen froze up, so i reset it with the reset button. it does get to the white HTC screen with red wording but thats it....whats up? can i use the techniques of the failed rom flashes to try to boot my phone?
phone charges though =P....but what good is that. any ideas before i just try to hard reset (and do a rom update for the heck of it)?
I bad the same problem last week. The HD runs after formating the storage-card and reflash a new ROM.
PS only flashing has no working.It's possible that only formating works...
Try to take the battery out for 1 minut and the start it again, it worked for me.