"No Program Memory available. Tap Start > Settings > System Tab > Memory, stop programs that did not automatically stop, and try again" :!:
Did you ever seen this message on your PPC?
This problem appeared by itself.
Hard Reset doesn't take effect. No programs available on my device, while memory is not full.
( How it can be full after Hard Reset ) Start > Programs - unavailable, but Start > Settings - works.
All programs don't open.
I tried to flash my device from original ROM to newest 1.72.00 WWE.
I did it, but it doesn't take effect.
I see the same message on the screen.
Of course my device works after Hard Reset, but when I make first Soft Reset or
Auto-reset, when installing program, this message appears again.
Now I don't know what to do. If someone confronted with this problem... help me please! :?
Dead Issue :? I don't beleave...
...
Maybe is your ROM Image that you are using damaged. Maybe... Try to use another one: 1.75 is the newest version of 2k3 or the best version for 2k3SE is v2.06(my recommendation). I know and I believe,that all problems can a hard-reset solve(well,the most problems) while is a good ROM Image installed.
Hi all,
Im new to this Universal forum since i recently got my MDA PRO ( Universal or JASJAR) from ERA mobiles-Poland. I have a few questions and would appreciate if anyone of you masters could answer them for me.
1. Firstly why do all the programs work so slowly??? I assumed that adding some new softwares slowed the system down but did a hard reset and found that there was hardly any improvement. i previously owned a Himalaya and it was much faster with the same software as in the MDA PRO. How can i change this and make more memory for running applications??
2. Is there an option where i could answer a call via the speakers by just lifting the screen of the phone?? i often answer a call with the hood closed and have to open the hood and press the "Speaker On" function before i can use the function. Im not sure if anyone has had this thought and a solution has been found.
3. I managed to download the new ROM from this forum and tried to update it on my machine but got an error " Invalid device" - Kindly contact your operator for the right update. my question is how can I update to a new ROM when running the maching with an excisting one? my device is from an operator in Poland but i would like to upgrade to a new ROM.
4. Lastly is it true that updating the device to a new ROM will increase memory and effeciency of the device or is a ROM update only developed for certain regional functions and software setting??
5. My last question is on my device desktop i can see 8 unread emails. when i select this the machine totally hangs and i have to do a soft reset. is there some way i can change this and reset the problem. Also can anyone tell me how to uninstall a email account once it is created?
my device information is :
ROM Version : 1.20.37 WWE
ROM Date : 12/04/05
Radio Version : ------ ( No information)
Protocol Version : ------ ( No Information)
ExtROM Version : 1.20.129 WWE
Hope to hear a reply soon as i am dying to make a few changes.
Venk
1. to fix most of your problems, upgrade your ROM.
2. Might be better to get a bluetooth headset. Preferably stereo one if you listen to music.
3. If it doesn't belong to the maker of your device (like you bought a QTEK and wanna flash an IMATE ROM) go to the wiki.xda-developers.com It is all explained there.
4. Increased efficiency. Maybe better memory handling but not necessarily more memory.
5. Upgrade the ROM and it will erase everything, even the 8 emails. Just make sure they are not there when you synchronize. Maybe the rom update will help.
P.S. Your ROM is almost 1 YEAR OLD!!!!! Pls. upgrade.
I keep on getting a country error when trying to do it, even though I've used the unlocking program on the XDA. What do I do?
trapper said:
I keep on getting a country error when trying to do it, even though I've used the unlocking program on the XDA. What do I do?
Click to expand...
Click to collapse
What Unlocking program? For Country ID Errors, there is a topic on this, PLEASE USE THE SEARCH BUTTON!
Hint: Use MaUpgradeUT_NoID.exe
Hello every body,
I'm a newbie. Yesterday night I bought the O2 xda neo. but it has a problem.
the problem is whenever I open the message program and then try to go to from inbox to outbox , that is try to change the menu, the program freezes. i can get out of the program, but if after that i try to open new program from the start menu, the pda hang. then i have to restart it manully or it restarts it self. every time i go through this process. its giivng me the same output hang and restart every time. can any body tell me what maight be the prb? is it a configuratio probllem of messaging. please help me outtttttttt.
i had another qus..ohw can i install a new theme for my pda.
O2 XDA Neo
so many people read the prb but no answer..sad today i have a new prb addition to that prb. when a new text message arrive when i try to view the message apart from the notiofication the message program hanged again. then i had to reset again...please reply me...if this prb consist i have to change the pda, which may not be possible...
my pda configuration is:
ipl:2.15.0001
spl:2.15.0001
GSM:2 19 21
OS: 2.15.13.27
ROM version: 2.15.13.27 WWE
Radio verion: 02.19.21
Protocol version: 4.1.13.09
ExtRom: 2.15.13.121
I've had a similar problem in the past but with a different WM device.
The problem (at least in my case) was caused by the SIM card, which was a Version 1.0 SIM card.
In new devices like ours, the newer the SIM card the better, and by newer I mean the latest version possible. In Mexico, cell carriers have been upgrading SIM cards to version 3.5, and since I upgraded my SIM, all SMS problems have gone for good!
You should check your SIM version, the latest versions have version numbers printed in the SIM card. Old ones don't.
I hope this helps.
Howdy
I use the exec as my phone and have a bit of an issue. I have found that the phone hangs and I don't get calls (go straight to VM ) no rings etc.
when I try to dial out it says service not available
I reset the device ad all is fine.
the only thing I can think on is Magic Button
I have uninstalled it for now to be sure.
is there a better phone to use then the one with the Exec?
I am looking for any assistance with this.
I have all my apps installed on the 1g SD card
including Ewallet, Pocket PC Bible,
I had magic button installed but since have gotten rid of it.
any other info I can provide to help in diagnosis just ask
im having alike issue too alto didnt install aplicaltion uch as yours,
the only thing i got is a video player from a 3rdparty and an SNES emulator..
my hpne sometime is not taking the call and send them to VM too but worst soemtime it switch off on my self !
so im gonna try WM6 now and see if it fixes the issue [email protected]
timhellsten said:
Howdy
I use the exec as my phone and have a bit of an issue. I have found that the phone hangs and I don't get calls (go straight to VM ) no rings etc.
when I try to dial out it says service not available
I reset the device ad all is fine.
the only thing I can think on is Magic Button
I have uninstalled it for now to be sure.
is there a better phone to use then the one with the Exec?
I am looking for any assistance with this.
I have all my apps installed on the 1g SD card
including Ewallet, Pocket PC Bible,
I had magic button installed but since have gotten rid of it.
any other info I can provide to help in diagnosis just ask
Click to expand...
Click to collapse
did u try hard resetting the device! perhaps that may help. by the way which version of ROM you got on your phone.
Phone Hangs
Hello here is my phone data
Device O2 XDA
OS: Win Mobile 5.0 build 14847.2.0.0
ROM 1.30.107 WWE
ROM Date 04/11/06
RADIO Version 1.09.00
Protocol Version 42.42.p8
EXTRom Version 1.30.162 WWE
I have the device set in corporate mode with code from this forum
Software installed
Ewallet on SD Card
Olive tree bible on SD Card
Removed magic Button (remove programs)
any thoughts
Help needed... want a more stable device..
timhellsten said:
Hello here is my phone data
Device O2 XDA
OS: Win Mobile 5.0 build 14847.2.0.0
ROM 1.30.107 WWE
ROM Date 04/11/06
RADIO Version 1.09.00
Protocol Version 42.42.p8
EXTRom Version 1.30.162 WWE
I have the device set in corporate mode with code from this forum
Software installed
Ewallet on SD Card
Olive tree bible on SD Card
Removed magic Button (remove programs)
any thoughts
Help needed... want a more stable device..
Click to expand...
Click to collapse
That's strange because the O2 standard ROM (AKU 2) is usually quite stable and quick. I wonder if the problem may lie in running your apps from SD card (which tends to be slower than the internal memory unless the card is fastand reliable) - maybe this is slowing the phone down and causing it to miss calls.
A number of suggestions - try first uninstalling all your apps and reinstalling them one by one testing the phone as you go. That may show the culprit app. If that doesn't work, try reflashing the ROM (using the software on the O2 xda website). If that doesn't work, try upgrading the radio to 1.14.1. I find this very stable on O2. If that doesn't work, try upgrading the CE ROM (you might like to start with one of the AKU 3.3 or 3.5 ROMs). If that doesn't work, you may be looking at a hardware fault.
If you need to know how to upgrade a ROM - read the wiki (several times if you've not done it before!)
Will try
Howdy
Will try your suggestions for sure.
Thanks very much for the help...
Tim
I have an unbranded Chinese P800 from eBay and would like to upgrade it to WM 6.0. What I have onboard :
1. WM 5.0 OS 5.1.525 (Build 15364.3.4.4)
2. Processor ARM926T OMAP730
However, one perculiar thing is that I can't find any Device Info on IPL, SPL, Radio ROM etc. I've tried using WST 4.2.2 but to no avail. I'm using my Lenovo S10 Netbook running XP and ASync 4.5. What I've managed to do are :
1. Run USPL, it goes from 0.. to 60.. and hangs, I reset my P800, USPL resumes to 70..100 and the RUU program starts,
2. the screen on my P800 turns dark with the Linux Penguin and some message of mapping, preloader etc comes on temporarily before Windows comes on again,
3. RUU runs, upgrading to image 9.99 (original image is blank-no info), when UPDATE ROM IMAGE ON YOUR PDA PHONE comes on it never gets to more than 0% (no blue progress bar), my P800 screen goes dark, loses connection and I get ERROR(260).
I have done this several times and there is no way I can verify if the CID is unlocked as I can't get the SPL info anywhere. So I will appreciate any help I can get. Thanks in advance.
Hi Salimbs,
Have a look at these two posts:
* Regarding the CID unlock for Artemis
http://forum.xda-developers.com/showthread.php?t=334667
* Regarding the error 260
http://forum.xda-developers.com/showthread.php?t=293085&highlight=error+260
Hope this will solve your problem
mouse.co.nr said:
Hi Salimbs,
Have a look at these two posts:
* Regarding the CID unlock for Artemis
http://forum.xda-developers.com/showthread.php?t=334667
* Regarding the error 260
http://forum.xda-developers.com/showthread.php?t=293085&highlight=error+260
Hope this will solve your problem
Click to expand...
Click to collapse
Hi mouse.co.nr,
Many thanks for your reply and pointing to the right direction. I'll get to it asap and post the outcome (success I hope!)
Hi Salimbs,
just another note,
in the past I found myself in big trouble (not with Himalaya as it was SD flashed) but with Charmer and Magician ROM updates, also with ROMs that I have already used in the past and classified as stable,
Roms used to get blocked during upgrade leaving me in Boot mode if I don't remember bad..
I have noticed that this error was common when Ms. Office applications like for sxample Word or Excel was turned on!
it makes like a kind of disturb to the rom!
once closed (all office and not necessary applications) roms updates smooth and bug free!
Don't remember if it was an Err 260 or not, I just remember that update blocked at a certain point...
try to do your upgrades with office turned off!
wish it will help to solve your problem
X-Mouse
mouse.co.nr said:
Hi Salimbs,
just another note,
in the past I found myself in big trouble (not with Himalaya as it was SD flashed) but with Charmer and Magician ROM updates, also with ROMs that I have already used in the past and classified as stable,
Roms used to get blocked during upgrade leaving me in Boot mode if I don't remember bad..
I have noticed that this error was common when Ms. Office applications like for sxample Word or Excel was turned on!
it makes like a kind of disturb to the rom!
once closed (all office and not necessary applications) roms updates smooth and bug free!
Don't remember if it was an Err 260 or not, I just remember that update blocked at a certain point...
try to do your upgrades with office turned off!
wish it will help to solve your problem
X-Mouse
Click to expand...
Click to collapse
Hi mouse.co.nr,
Well noted and I'll keep this in mind. From your experience have you ever tried the SDHC.cab so that your phone can read the micro SDHC? I ran it in my phone and now my STORAGE CARD is gone! Anyway, thanks again. Cheers!
Not SDHC my friend but Artemis SDHC,
I don't know what is exactly the difference, maybe one is for big SD and the other is for MicroSD, anyway I've tried the one for artemis and now I'm working with a 8 GB micro sd, and it can go till 16 GB.
I've tried that with other artemis ROM versions and works very good...
For your problem have a look at this post:
http://forum.xda-developers.com/showthread.php?t=345038;
and download the programs indicated below...
What I advice you to do is the following:
1) remove your SDHC card (it have a sort of bad luck with any upgrade that needs a reboot)
2) copy SDHC_Artemis_back2original.cab to your documents folder (PPC documents obviously) then run it, soft reset.
3) then copy the correct SD HC for artemis "SDHC-Artemis.cab ", in the same way of the above and run it.
this shuld work "I wish for you"
let me know..
how about the ROM update? did you succeed at the end?
have you also updated also GSM radio ROM? generally original roms come with a 2.11.... version, old and not always good in reception!
I advice to change it in 03.18.90 shall work well also with your provider, for GSM signal WIFI, GPRS and GPS..
have a look at this post for more details: http://forum.xda-developers.com/showthread.php?t=397939
X-Mouse
mouse.co.nr said:
Not SDHC my friend but Artemis SDHC,
I don't know what is exactly the difference, maybe one is for big SD and the other is for MicroSD, anyway I've tried the one for artemis and now I'm working with a 8 GB micro sd, and it can go till 16 GB.
I've tried that with other artemis ROM versions and works very good...
For your problem have a look at this post:
http://forum.xda-developers.com/showthread.php?t=345038;
and download the programs indicated below...
What I advice you to do is the following:
1) remove your SDHC card (it have a sort of bad luck with any upgrade that needs a reboot)
2) copy SDHC_Artemis_back2original.cab to your documents folder (PPC documents obviously) then run it, soft reset.
3) then copy the correct SD HC for artemis "SDHC-Artemis.cab ", in the same way of the above and run it.
this shuld work "I wish for you"
let me know..
how about the ROM update? did you succeed at the end?
have you also updated also GSM radio ROM? generally original roms come with a 2.11.... version, old and not always good in reception!
I advice to change it in 03.18.90 shall work well also with your provider, for GSM signal WIFI, GPRS and GPS..
have a look at this post for more details: http://forum.xda-developers.com/showthread.php?t=397939
X-Mouse
Click to expand...
Click to collapse
Hi Mouse,
Thanks to you my STORAGE CARD problem is solved! However with regards to my ROM update I'm still a little confused.I've managed to patch the artemis_jumpSPL_pof_v1.nb using Kermit the Frog(jumpSPL.exe). After that I run the RUU again but I still get the same result-0%Can you tell me how or show me the relevant threads?
Hello Salimbs,
Kermit sounds funny but it's the first time I don't know how does it work!!
try the ufficial SPL unlocker for artemis, nothing more,
download from here:
http://forum.xda-developers.com/showthread.php?t=311403
* Connect your PPC through Active Sync (connection shall be established),
* Run start_uspl.exe from the Artemis_USPL package in the link above,
* Run till it reachs 100% and Dos Window turns off alone, and launches RUU upgrade interface..yes, yes, continue, continue.... 100%
* After device shall have SPL 1.11 and so you can load new ROMs
let me know if it will solve the problem..
X-Mouse
mouse.co.nr said:
Hello Salimbs,
Kermit sounds funny but it's the first time I don't know how does it work!!
try the ufficial SPL unlocker for artemis, nothing more,
download from here:
http://forum.xda-developers.com/showthread.php?t=311403
* Connect your PPC through Active Sync (connection shall be established),
* Run start_uspl.exe from the Artemis_USPL package in the link above,
* Run till it reachs 100% and Dos Window turns off alone, and launches RUU upgrade interface..yes, yes, continue, continue.... 100%
* After device shall have SPL 1.11 and so you can load new ROMs
let me know if it will solve the problem..
X-Mouse
Click to expand...
Click to collapse
Hi mouse,
Actually "Kermit the Frog" is the icon for JumpSPL.exe. Anyway, like I've mentioned in my first post everything seems OK except that I can't check for the SPL and when the RUU runs it never gets to more than 0% and then I lose connection and get ERROR 260. I'll be trying again and let you know of the outcome. Once again, thank you, I really appreciate your help!
salimbs.
Hi Salimbs,
sorry for hearing that...
try to enable RAPI before USPL!
http://forum.xda-developers.com/showthread.php?t=320155
Remove SDHC card (and uninstall SDHC software from ppc)
Then USPL
Then Rom Update Utility
mouse.co.nr said:
Hi Salimbs,
sorry for hearing that...
try to enable RAPI before USPL!
http://forum.xda-developers.com/showthread.php?t=320155
Remove SDHC card (and uninstall SDHC software from ppc)
Then USPL
Then Rom Update Utility
Click to expand...
Click to collapse
Hi Mouse,
I'm open to all suggestion. I'll try it again and we'll see. Thanks.
I'm afraid that I've not met with any success after trying all the combination and tricks mentioned in this thread. Every time at the part of the RUU flashing it never goes beyond 0% then I lose connection and get ERROR 260. I would appreciate any help I can get, and thank you in advance.
Hallo,
i have got a p800 from china and have the same problems. I tried all things but the update doesnt work. The connection always interupts with err260.
regards