Related
Hello all,
well it is not 100% free, you need to earn it.
The price is to allow me to downgrade the RSU to 4.16
I am unable to do this and have tried so many things so far without any success.
I have RSU 3.23 now
ROM wise, I have no problem, I can change it using the SD method and the ismgtool.
Well, I am sure you will ask, what is the guarntee? Tkae my word for it for the time being and try me.
You can send me a private message or e-mail me ([email protected])
If I receive the solution from more than person, I will look at the time I have received the pm/e-mail and the prize will go to the eriler responder.
HURRY :!:
and the winner is: to be updated
and the winner is:
no winner yet!!
Work harder folks
You have "RSU 3.23" and want to **downgrade** to "4.16"? What am I missing :?: :?:
yeah, numbers are meaninless!
Anyway, just solve to me the issue of downgrading 3.23
Hmmm ! i guess you can't
Hello
as far i know and if my memory still works i read something which says you Can not roll back to older version and that was on the 3.23.01 release note.
HTC Advice not to try to downgrade your GSM cause you might distroy your device and lose the GSM capabilities.
also few other issues include
Fixed: SIM unlock code hacked
1. Disable memory dump function.
2. Unlock code encryption.
Fixed: Do not auto-reactivate PDP context when network reject PDP context activation
Fixed: Specific message should store in SIM without affecting the VMI
Solution: Change the DCS of specific OTA message from 0x00 to 0xf2 (Store message to SIM)
Fixed: After dail a wrong number, dail second call with correct number within 30 seconds,
this call will be established for 2 seconds, then be automatically cancelled.
Solution: ACI state is not syncronize to MMI state. Syncronize the state of ACI and MMI.
Fixed: USSD Problem
Fixed: Inter-SGSN Issue
regards
Othman
www.pocketpc4arab.com
Othman,
are you replying to a different topic? :?
What is the relation between what you have written and the downgrading issue?
Place adaptrom.exe in the up or down grade application folder.
run adaptrom, then the up or downgrade application.
This will change the rom as well as the radio stack.
einas_canada said:
Hello all,
well it is not 100% free, you need to earn it.
The price is to allow me to downgrade the RSU to 4.16
I am unable to do this and have tried so many things so far without any success.
I have RSU 3.23 now
ROM wise, I have no problem, I can change it using the SD method and the ismgtool.
Well, I am sure you will ask, what is the guarntee? Tkae my word for it for the time being and try me.
You can send me a private message or e-mail me ([email protected])
If I receive the solution from more than person, I will look at the time I have received the pm/e-mail and the prize will go to the eriler responder.
HURRY :!:
and the winner is: to be updated
Click to expand...
Click to collapse
you can send me the device, i can run over it with my car, get AT&T to replace it with a new one ( I have insurance from them) and BAM! start from scratch
OK, how about this:
1. Obtain the RSUpdate.exe and accompanying files for the radio stack version you want to upgrade/downgrade to.
2. Copy them to the \Windows folder on your device
3. On the device (use File Manager), run RSUpdate.exe. This will manually update the radio stack.
4. Send the free XDA to me, since a winner is me!
JoshB
2JoshB: It is not so easy as you wish.
You may not downgrade 4.21 radio to 3.19 and below in this way (though it is Ok for greater versions). The restriction is by design and appears during actual uploading to radio module due to some kind of _internal_ checking.
I can suggest the following:
-convert RSUpgrade.cp64 you want to upload to binary format. Let it be 3.19 for example
-try to find 03 13 and 13 03 entries (= 3.19 in hex)
-If entries are exists -try to replace them with 04 15 or 15 04 accordingly (= 4.21 in hex).
-convert RSUpgrade.cp64 back to text
-try to flash these files in the usualj way (upload to windows etc...)
But this way is very dangerous. I mean that such a stupid replacement may corrupt radio stack code, so your radio will be broken completely.
More than that: radio stack version checking may be implemented not by number but features available in RSU. So version changes may not be enough to downgrade radio.
the more reliable way is to disassemble radio stack and bypas version checking in more sensible way. But unfortunately my qualification is not enough for doing this.
falconeyez said:
you can send me the device, i can run over it with my car, get AT&T to replace it with a new one ( I have insurance from them) and BAM! start from scratch
Click to expand...
Click to collapse
Can we send you a whole box to drive over ?
Till now, there is no winner
Will there ever be............
Prove the solution is working and there will be.
Soultions that work once like driving the car over it are not acceptable :lol:
Come On guys!
Instaead of Hi I say you are great people
So the case is... I just need to have working Qtek 1010 with SOME additional soft on it inside a ROM...
I've read many pages in this forum and I'm able to find too many ways to change my ROM. I'm totaly confused.
I work for extremaly big worldwide company and they gave me q Qtek, told me to use it, gave me one simple application and web link... so I do.
But the Qtek is much powerfull than that so I need to flash my ROM.
Now comes a question: where can I find one document how to prepare for it, what tools do I need, how to do it... I know after some tries I will be confident enough to do such stuff easlily, my problem is I have only one try, they will make me w trouble if I screw my company recource.
I understand you had milion similar questions like that. Basicly I need help how to flash so I can be sure 100% not less that I can recover in case of trouble. I hope you understand I'm afraid to do it because lack of experience and you are able to tell me if I should try to flash...
or maybe it's better for me to ask my boss to by me a 512 MB SD and install all additional soft on it and stop worring about memory?
I'd appreciate any opinion... you are the best and I'm just new to this bussines...
Get an sd card, backup existing rom to sd card, very easy to do by bootloader method. Enter bootloader by holding down power while inserting stylus in the reset hole on the bottom left of pda then press top right function key, then choose ce to sd. Once you have done this you can check if it has in fact backed up your rom by putting sd card in the pda, enter bootloader, it will then give the option to program the rom, just remove the card and push the reset with stylus again, the other method to check a working backup is to put the sd card in the pda, the pda will ask to format it, say no and remove it. Once you have a backup you can either use xdatools to copy it to your pc or keep it in a safe place, no more files must be written to this card otherwise it will be rendered useless, if you wish to reuse the card sometime it will need formatting. Once you have your backup, go to www.yorch.net, cook yourself a rom and download it in the exe format, this will do a normal install from your pc while connected to pda via activesync, if it messes up you always have your backup. Once you become more proficient at using xdatools you might wish to try out lots of different roms until you are happy with the result, you can go on to sd card flashing which is a much better way of programming rom and much less prone to error because it doesnt rely on a pc connection. I would advise you to leave the radio stack alone, if you can make and receive call ok leave it alone. Have a thorough look around the forum before proceeding. Its good fun to program your pda and you can make it a much better tool, but make sure you always have a way out if things go wrong.
www.yorch.net not working... is there a place like that?
Hi!
I read the above post, one of the clearest here, and I almost got the confidence to finally do this ROM update...
But:
1) Can't find the www.yorch.net website where I could "cook myself a rom and dowload it in a .exe format"
2)It's still not very clear to me what exactly cooking a ROM means: it concerns the OS (the version 1.53, 1.72 type of stuff), the extended ROM (the default programs u get starting after and hard reset like the SW for the camera etc) or both?
Thanks!!!
Chris
Another ROM Kitchen
Try the following ROM Kitchen http://lumpistefan.dyndns.org/
I noticed that you have the XDAII. Now, someone please correct me if I'm wrong but the directions above and the ROM kitchens are all for the XDA I or Wallaby version.
Re: www.yorch.net not working... is there a place like that?
cchris said:
Hi!
I read the above post, one of the clearest here, and I almost got the confidence to finally do this ROM update...
But:
1) Can't find the www.yorch.net website where I could "cook myself a rom and dowload it in a .exe format"
2)It's still not very clear to me what exactly cooking a ROM means: it concerns the OS (the version 1.53, 1.72 type of stuff), the extended ROM (the default programs u get starting after and hard reset like the SW for the camera etc) or both?
Thanks!!!
Chris
Click to expand...
Click to collapse
Chris,
Those Roms are made for XDA1 beware it's not made for the device you have!!!!!!
What's the kitchen for XDA II
THANK YOU!
I was starting on the wrong foot... :-( :?
Anyway a couple of more question:
1) Is there a place like that for XDA II Kitchen? Is my undestanding of what a kitchen is correct?
2) The process for ROM backup outlined above, is still correct for XDA II?
Thanks!
Chris
I'm in the same boat as you CChris. I've been diligently a daily searching through the numerous topics on this site looking for similar information. I haven't found it yet - or at least nothing not-to-super-technical. I do know that you get to the bootloader by pressing the power button, reset button, and down on the toggle at the same time rather than the Wallaby way of the power and reset buttons only. It also seems that there are issues regarding 'country' and that it requires software to get around this. I haven't found the software yet - the links that I've seen all point to "itsme's" website which is currently down.
You can read the thread here: http://forum.xda-developers.com/viewtopic.php?t=9053&highlight=
Hopefully, someone with a lot more knowledge than me can go over updating the XDA II as clearly as cruisin-thru did for the XDA I.
The instructions on http://wiki.xda-developers.com/wiki/HimalayaRomFlashing are correct.
Unfortunately, there was an issue where the wiki removed the ~ from itsme's website's address. It's been replaced with %7e and now the link works.
If you download a ROM from the same vendor as your device (e.g. Qtek ROM on Qtek device, iMate ROM on iMate device, etc.) you don't need to use these instructions, you can just install the ROM upgrade from your vendor.
If you want to use the latest ROM (from iMate) and your device isn't an iMate, you need to decrypt, change the "country" code, encrypt, and then run the upgrade.
You can also edit the extended ROM when flashing, but it's easier to use itsme's extRom Tools. See http://forum.xda-developers.com/viewtopic.php?t=8422
You do NOT need to flash the ROM if you are not experiencing problems, or if you are experiencing problems which the new ROM also has (for example ugly cleartype fonts, which may be fixed without flashing). Flashing the ROM may void your warrantee. You will lose all your data when you upgrade, and you should not restore a backup, only your my documents folder.
If you are a newbie, it may be best not to flash your ROM. If you typed in itsme in google, you would have found his xs4all address as the third link, and would have quickly found out his site wasn't down at all, but the link was just wrong.
Just a warning: the things that could go wrong when flashing are potentially much worse than a wrong URL, and the answer to those problems won't be the third link in google.
NO MATTER WHAT YOU DO DON'T COME NEAR THE RADIO UPGRADE I QUOTE I FRIEND HERE THAT SAYS
DON'T MESS UP WITH A WORKING RADIO OR YOU'LL END UP WITH A SLIVER BRICK !!!!!!!!!
BEEN THEIR :x :x :x :x
Rabia said:
NO MATTER WHAT YOU DO DON'T COME NEAR THE RADIO UPGRADE I QUOTE I FRIEND HERE THAT SAYS
DON'T MESS UP WITH A WORKING RADIO OR YOU'LL END UP WITH A SLIVER BRICK !!!!!!!!!
BEEN THEIR :x :x :x :x
Click to expand...
Click to collapse
Rabia can you tell me how did you get out from there?
never got out of it
Here is rom with new Radio ROM 1.04
http://extendedsystems.dk/download/qtek/2020i/WWE_Sonofon_11100_165_10400_Ship.exe
Enjoy
Thank for the new radio, but some how I got country erro on the processing upgrade.
Please Help.
is this for the xda 2i please ..only asking as i'm not sure
thanks
This rom is only for Alpine phones, thats the 2i, 2020i etc.
As soon as my broadband is working again (tomorrow hopefully) I'll post the O2 162 rom with the radio 1.04 update for the UK users and anyone else who wants it.
If you want to try this update on the 2i you will need to extract the files from the installer and locate a copy of maupgradeut_noid.exe and use that instead of the included installer. There are better instructions elsewhere on this site, just do a search for my name, I'll be in amongst it all somewhere.
cheers i'll give it a go but if you are doing it maybe i'll wait ,i've only just gone back to your old 1 tonight as i don't use blackberry & it seemed better than o2 update
I have just posted the ROM upgrade on the ftp site, the only change is the radio from 1.03 to 1.04. It seems to give a better signal strength than version 1.03 on my phone anyway.
Here's the link to download the O2 version I just combined
(Edited to working link
ftp://xda:[email protected] XDA_IIi_Upgrade_v1.11.162_Radio_1.04.rar
1: Backup your contacts/device to Storage, Storage Card or PC. If you are using Ext Rom 1.11.162 now you can use full device backup to restore at the end to save you re-installing all your programs later.
2: Extract the ROM using Winrar to a folder of your choice.
3: Run MaUpgradeUT_Noid.exe. The install will fail, don't worry, just run it again without touching the phone.
4: When the upgrade has finished, do a hard reset by pressing the power button and reset button at the same time.
5: Install any programs and any data you backed up during step 1.
Good luck.
Excellent stuff
Upgraded and now running 1.04 radio and i can also say it has improved my signal strength too
Big thanks Pug for your work on the ROM image too, very much appreciated.
Hear, Hear. Many thanks to Pug, great work!
many thanks to Pug,
its work perfectly.....no more lag of ringtones or lag after green button pushed!! thanks Pug.....
i want to know about backup, after upgrade ROM, i cant restore back by backup. When using Backup Sprite, i will go back to old ROM after restore complete. any ideas????
@ Clustered
When you say it goes back to the old rom do you mean that the Radio rom is regerted back to 1.03 or that your extended rom goes back to 192 or whichever you are using?
Sprite backup should not revert the radio rom back to 1.03 as it should only do the file system of your device.
As far as the extended ROM version, all it is there for is to indicate the "update" status of the extended ROM and what software is installed in it. An asian rom may have a higher rom version but may be no newer or better than the european 162 rom. You're talking about comparing hedgehogs to wibbles, completely arbitary. As soon as you cook the extended ROM like I have it is completely meaningless anyway as the version number is no longer valid.
If you wish to change the version number yourself, use a registry editor and go to:
HKEY_LOCAL_MACHINE\SOFTWARE\OEM\3RDVERSION and change the MSYSTEM value to whatever you like.
If I have the wrong end of the stick, I apologise otherwise I hope this helps.
huh!? are u mad at me ??? anyway, i just wanna tell that you're the great! thanks very much....
I'm not mad at you, just woke up from a night shift....bloody binmen.
Was just trying to figure out which rom was reverting and so on. Hope it was of use to you anyway.
Once again, sorry.
HELP!
I Can't Upgrade the ROM.
step 1 is OK (radio)
Step 2 is OK (EXT):
Step 3 to 8 % PC show : Error 112: CE ROM UPDATE ERROR
WHY???
i run the MaUpgradeUt_noID.exe second Time , but frist Run MaUpgradeUt_noID.exe Need to STOP(use TASK Manager)??
PLEASE HELP ME
thanks for the update ..it's upgrading at the moment
thanks for the update, the only problem i'm having is that even though i've got the in call volume as low as it will go it is still too loud to be comfortable which is a big change from the previous rom. Also when using in the car on handsfree the other person can hear his voice echoing as they speak. Any ideas????
Successfully upgraded my XDAIIi.....
I'm now with the latest ROM from O2 UK (1.11.169 WWE) and the Radio version 1.04.00
Hi, I'm from Malaysia and will this rom be able to use on my device?
I'm using XDA IIi and device id is PH10C.
I'm affraid there will be a problem for my local operator "Maxis".
@ ramnkc
To be honest I can't see a problem with this ROM working with your current operator. I'm pretty sure that others from your neck of the woods are using the ROM with no problems. The biggest problem you would have is that it wouldn't load all your GPRS, WAP, MMS, etc settings as it is a UK rom.
Make sure you can get hold of these settings off your current provider before you perform the upgrade. Or as an alternative, extract your current ROM and reload it back onto your phone using SD card.
thanks for the reply !
Well i guess i gonna wait for the official release coz so far i'm happy with it. Apart of the constant SD Card data missing after playback mid, mp3 or what ever music files from SD Card.
And i finally found out that it cause by SBP pocketplus which had an option to close all application once you tab on X. Once i turn that option off in pocket plus so far problem free.
Guys/gals out there have this problem ?
ykyloveu - Does this mean you have BB Connect as well? The only modified rom from here I can download is based on cer .112 The new rom for o2 with BBConnect is ver .169
All,
I've exchanged many emails with the imei.check.co.uk team and also met personally one of these guys in order to be able to upload a new ROM to my O2 Orbit. I had excatly the same problem as many of you with ending the uploding process with "model invalid id" error message.
Now I'm happy to say we do have a solution.
So if you want to change your ROM (any), simply follow these instructions:
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
Of course you can publish the instructions...
BUT PLEASE put a BIG WARNING! It will crash the phone in case you don't have a valid key file to perfom the last step: RUN THE UNLOCKER AGAIN AFTER THE ROM MODEL SWITCH TO RECOVER FROM THE DATA CRASHED MESSAGE!
Hello,
we found a way to flash ANY artemis roms in ANY Artemis look alike device (HTC Hero too).
Tools you need:
-hexworkshop from http://www.bpsoft.com/downloads/
-Any rom
-winzip or winrar
-http://www.imei-check.co.uk/C3v1Unlock.zip
a valid UNL file for your phone.
install hexworkshop and winzip/winrar
Take any rom for example: ART_HTCWWE_11240501_026790_WWE_Ship.exe
in explorer, right click on it and select "Extract files..."
Now it will unpack all the files
You'll have now "HTCWWE_shipsigned.nbh"
right click on it and Click "Hex Edit with Hex Workshop"
You'll see on the 5th row ARTE10000
Make it ARTE***** and save file
Now right click on ROMUpdateUtility.exe and "Hex Edit with Hex Workshop"
Search for word password.it will find it at 0x3E0B0 after password replace "BsaD5SeoA" with "IMEICHECK" and save the .exe file
Now connect the phone to the pc (normal way). run the C3v1Unlock.exe
when is asking for UNL file, disconect the phone from pc, press cancel, and
close the unlocker.
Now connect the phone back to the pc (in this mode it is) and run the
ROMUpdateUtility.exe
Now follow the instructions as the upgrade it will work.
After upgrade done, run the unlocker again and this time select the correct UNLfile.
Task Done.
C3 after flashing with any WIFI roms it will STILL not have WIFI!!!
Regards,
IMEI-CHECK Team
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
Cheers, Martin
YESS, I have changed my GER rom to new HTC official ENG Rom, you are the best!!!!!! It's very simple to do...
yuppyyyyyyyyyyyyyyyyyy
the next step is.... backup the ROM I'm search ITA ROM form my HTC 3300.
see you later...
Good Discovery,
But the key is: We will have to pay 38USD for the "Proper UNL file" which is unique for every IMEI. Is it right?
Yeah, Thanks mr. Martin who is from Imei-Check Team. But we are still looking for a free solution.
Regards!
Tamagochi,
yes, first you have to go to imei.check and pay for the unlocking program and the unique .unl file.
P.S. I'm not a member of imei.check, just had the same problem as many Orbit users here...you can find my previous thread.
Works great on all versions.
Great support from the boys from emeicheck
Question about directions
Okay, I'm gonna try this. Do I still follow these directions exactly even though I have already unlocked the CID?
Also, when you see the line "ARTE1000" do you actually replace the "1000" part with the little stars? Sorry, I'm really new at this!
Thanks!
Yes you must do it all.
HELP
Everything went smoothly but when the device rebooted, it want me to "align the screen". It doesn't seem to be able to detect the stylus touching the screen! Can't get past that screen! Anybody know what I could have done wrong?
REF: HELP (Never Mind...)
I DID IT, I DID IT, I DID IT!!!! Just had to wait a minute or two and then everything seemed to work fine!!! TomTom is there, my WiFi is working! Thank you MAROSV and FRANCOBANCO!!!! If I can do it, ANYBODY can!! THANK YOU!!!
Hi KleineMaus,
I am wondering which ROM u used on your orbit that includes tomtom?
Or do you just mean you still had tomtom stored on your menory card?
Cheers, Towelie.
towelie said:
Hi KleineMaus,
I am wondering which ROM u used on your orbit that includes tomtom?
Or do you just mean you still had tomtom stored on your menory card?
Cheers, Towelie.
Click to expand...
Click to collapse
hi, I've just used the last HTC offical Rom (see xda ftp site..) that include TomTOm + 1 city map
byebye
Hi, I used the ROM on the Wiki page Dopod|English|DOPOD001|ARTE1****|1.25.707.2 ??/??/0?|1.25.707.104|1.25.0000|02.69.90|4.1.13.30| [Download|ftp://xda:[email protected]/Artemis/Shipped_Complete_Updates/ARTE_DOPODAU_12570702_026990_WWE_SHIP.exe]|[Thread|http://forum.xda-developers.com/showthread.php?t=286639]
It worked like a charm. The only problem I had was that when the Orbit re-booted after the process finished, it didn't seem to detect the sylus. I just waited five minutes and then it worked. Guess it was still getting settled in with it's new ROM. I don't know where I had the TomTom before I started the update, but it installed the German maps which were there before but as a bonus it gave me a English speaking voice which I didn't have before. It came with a German voice and I couldn't change because I had not yet upgraded the memory and had no room. So, my update was super! The only little thing is that once I changed the screen color back to blue instead of that terrible green, I couldn't get the phone part (dialing pad) to change to blue. No biggie, as now I can use my Orbit in English. I can live with the green phone pad! Maybe somebody will tweak that one. Hope this wasn't more info than you needed....
KleinMouse,
the dialing pad can be easily changed as well....just do a little seach on this Artemis forum and you will find many links pointing to skins available for WM5 phone edition.
O2 Orbit ROM upgrade info
Hi,
my o2 orbit has ROM 1.25.206.2 WWE. I wanted to know if this is the latest ROM available for my phone. I got my phone 10 days ago and i gotta do a soft reset on it every day. I had the same kind of problems with o2 Atom. But most of the issues were corrected once the ROM was upgraded. Please someone update me on my situation. Thanks
I tried the steps but i'm always getting the ERROR[300] : INVALID UPDATE TOOL - This Update Utility cannot be used for your PDA Phone. Please get newer Update Utility
Anyone who can help me here? I already tried different ROMs but always the same message
Did you unlock with imei-check? What is your model ID ARTExxxx ?
Yes i did. My Model ID is ARTE100
Hmm, but the steps described above are necessary to follow only if your model is Orbit (ARTE200). If you have HTC P3300 or Dopod p800W or Artemis or MDA compact 3, then you don't need to do it this way. The only thing you need to do is to unlock with Imei-check. If it still doesnt work, contact their help desk.
Ok i see, very strange indeed. I did the unlock with the stuff from Imei-check but i still get the message ERROR [244] : INVALID MODEL ID . If i try the steps from your post #1 , i get the described error obove. I'll try to contact the guys from imei-check, i hope they can help me
Hi Kleine Maus, I read with great joy that you succeeded and I would like to feel the same way.... Could you kindly reply to me and give me some detailed instructions to follow? Hopefully this will work for my HTC P3300....Thanks in advance.... I really appreciate it. Best SiperX
First problem i have, whenever i try to use the windows update i get the following message:
Connection to update server was not available. Check our data connection settings and ensure the device date and time are correct.
Click to expand...
Click to collapse
Date & time is correct, mobile connects to websites ok so i dont see why it wont connect?
while googling this, i found theres a ROM upgrade for the phone aswell, do i need it? the phones 6months old and has ROM version 1.56.405.1
The main reason im wanting to use windows update is because i've tried to install a couple of apps and it tells me i need an upgraded .net framework, is there any other way to do this? and how can i find the latest version?
thanks if anyone can help.
dont waste your time...
in short ,dont waste your time with windows update,it is not used ,at all.
windows update (according to interviews on FACEBOOK..windows mobile, with relevant persons from MICROSOFT.....) is only for very crictical updates and they have never used it ,(as far as i know...?)
best is to navigate to htc website ....
http://www.htc.com/mea-en/supportdownloadlist.aspx?p_id=179&act=sd&cat=all
..make sure to select your country ..top right of webpage ,
note, above link i provided... is for htc middle east and africa...and upgrades might not be applicable to your country...!!!!
the .net issue is seperate issue..has got nothing to do with upgrade..!!..
it is used for certain applications to function...
, google for ..something like ...."netcf 3.5 download "....or/
try this link and make sure it is what you are looking for.....!!!!!
http://www.microsoft.com/downloads/...49-3C6B-42F1-9FD9-0041345B3385&displaylang=en
follow link..it will take you to microsoft web page (dont worry, it is a free applications ) ,but be aware ,the application is about 33 megabytes,and download it to your pc.
afterwards , you have to connect phone to pc and install from pc.to phone..reboot phone and you application should work.?
( do not try and install from phone ,it wont work )
good luck
willcor
From what I can see you already currently have the latest ROM upgrade that is also available via HTC's website, so there is no need for you to download and install it again. At the time, the ROM was released to improve the overall functionality of the phone and fix some existing issues with it.
Here is what the ROM upgrade contained:
Improved Functions and Fixes
1. Updated the Connection Setup Database.
2. Improved emergency call connections while using Airplane Mode.
3. The GPS position updating speed has been enhanced.
4. A Title bar display flicker in TouchFLO 3D has been corrected.
5. Fixed multiple browsing issues.
Go to this link, and download and install the NETCFv35.Messages.EN.wm.cab to your device. After you installed NETCFv35.wm.armv4i.cab, reset your phone.
thanks alot guys, appretiated
Since installing this, im getting quite a few error reports
"A problem has occured with... please tell microsoft about this program"
Reflashing the rom might help.
lemzip said:
Since installing this, im getting quite a few error reports
"A problem has occured with... please tell microsoft about this program"
Click to expand...
Click to collapse
In that case, (if i was in your shoes) i would try to hard reset first then install the .NET cab first and then any other programs you want afterwards. Then hopefully those nasty errors will disappear