"No Program Memory available. Tap Start > Settings > System Tab > Memory, stop programs that did not automatically stop, and try again" :!:
Did you ever seen this message on your PPC?
This problem appeared by itself.
Hard Reset doesn't take effect. No programs available on my device, while memory is not full.
( How it can be full after Hard Reset ) Start > Programs - unavailable, but Start > Settings - works.
All programs don't open.
I tried to flash my device from original ROM to newest 1.72.00 WWE.
I did it, but it doesn't take effect.
I see the same message on the screen.
Of course my device works after Hard Reset, but when I make first Soft Reset or
Auto-reset, when installing program, this message appears again.
Now I don't know what to do. If someone confronted with this problem... help me please! :?
Dead Issue :? I don't beleave...
...
Maybe is your ROM Image that you are using damaged. Maybe... Try to use another one: 1.75 is the newest version of 2k3 or the best version for 2k3SE is v2.06(my recommendation). I know and I believe,that all problems can a hard-reset solve(well,the most problems) while is a good ROM Image installed.
Related
After hard resetting my Qtek 2020 and restored my data from my Backup, I cant open any programs and I get the message "No program memory available" and it wants me to go to the memory tab to shut down some programs, but the thing is that no programs ar open.
I done a complete restore, so my PPC shild be exactly as before i did the hard reset, and before that I didnt have any problems..
Anyone nows what this could be?
I wont even let me go to th Programs menu....
Please help!
Peter
Did you do a hard reset because of a ROM upgrade? Did you likewise restore system files?
check the memory settings ... make sure the scale cursor is not too far to the right side.
I used XDAII. In recent days, after hard reset and installed some software, when each soft reset, my device had the warning: " Can not find 'loader'(or one of its components). Make sure the path and filename are correct and all the required libraries are available." I didn't know what is loader.exe, and the way to solve this problem ?
Could anybody help me?
Did this error occur before you installed the software?
One possible cause for such an error is if some software you installed has a 'loader.exe' file that needs to run on startup (after soft reset). If this file was installed to a SD/CF card the system can't find it during startup.
If you have software that needs to run on startup you should install it in main memory.
If this doesn't help try posting some more details: does the problem occur on a clean device (right after hard reset), what programs did you install, etc.
Good luck!
On my O2 Atom my WM 5.0 installation is corrupted. When I reinstall the latest ROM on that unit the behavior stays corrupted.
On a second unit I have installed the same ROM and everything is working fine.
The problem that I have is that all applications I install give me a message that the author is not know or that these are not PPC applications but only after the first soft reset.
Questions:
Is there a way to ensure that the memory that holds WM 5.0 in the device is working correctly :?: Is there a way to format this memory :?: Does a reinstall of the latest ROM really erase all of the old ROM bits and pieces :?:
thanks for your help, I am aware that the atom is not and xda but I am also aware the you guys are the most profesional community out there.
chuckchuck: on the Universal and Wizard, we have a tool built in called ClearStorage, that is the equivalent of a hardreset, wiping out all memory. Does the atom have a similar app?
V
vijay555 I have not found such a file on the atom or function on the atom. Would there be a software tool out there that could do it ?
I am a bit puzzled, I always thought that after a ROM install all the old stuff is out the window. This might still be the case but then I guess it would be the memory that is bad.
Hard reset Atom
Try hard resetting the Atom.
With the Atom off, use the stylus to press the reset key at the bottom while at the same time pressing the power-on button.
You will be prompted if you want to do a hard reset (warning - this clears all you device data so make sure you backup what you want first)
press both the "call" and "hangup" buttons and a hard reset will be done.
If you do nothing, after a short while it times out and a normal reset is done.
Thanks for the info, I have done that already, but what I was wondering is whether it is possible after such a hardreset that there will still be code left overs in the memory that could prevent a true clean install.
Could someone please help?
I have an XDA Exec (HTC UNIVERSAL) Ive been searching for days to a solution for this without avail and you guys seem to know what your talking about! Im very new to this and need a solution to this error when i try to install some applications and run them:
" X cannot be opened. Either it is not
signed with a trusted certificate, or one of its components cannot be
found "
Is there any way you can disable this in WM5? my WM5 version is OS 5.1.1700 (Build 14354.0.1.1)
Or is there any way whatsoever you can get around this? please if anyone can help do let me know and post!!
Thankyou !!
Is your phone locked ?
It may be locked or your operator prevent installing all of 3d party applications. In this case reinstalling "clean" WM5 may help (I'm not sure though) - I'm only a newbie in WM5.
Another reason that application you run trying access trusted functions - like allocation of the physical memory. In this case I'm not sure what can be done - reinstallation of WM5 will not help.
Its unlocked! so if i re-install wm5 it wont say this when i install programs? i have tried resetting the phone and installing different roms but nothing works! is there any particular rom i should be looking to install? or anything i can put in the extended rom to install after a hard reset to sort this out? PLZ HELP!
I have had that problem, too and I was going crazy. Then I tried the following tweak but I do not really know why it should work, it just did:
in HKLM\System\ObjectStore is a reg key "RegistryType=1", which means Hive based registry.
When you set it to "RegistryType=0", which means FILE based registry, all changes you do in the registry will stay there also if you reboot with device's reset button...
BUT AFTER YOU CHANGE THIS VALUE, FIRST REBOOT HAS TO BE DONE WITH SOME SOFTWARE, NOT WITH THE RESET BUTTON.
Subsequent reboots can be done with reset button then. :lol:
there is another tweak that gets rid of the warning messages, but I did not use that one
really! which software could i use to reboot the phone??
also is resco registry okay to view and change this? it says registry type 0x0 (1) i have now changed it to 0x0 (0) is this correct? i performed a soft reset but im stil getting the error message! is this because i need to use software to reboot?
yep, the first soft reboot needs to be done with software. After that you can use the usual way again.
After I had done this I removed all "problem apps" and then reinstalled them and it worked.
What software did you use or could i use to reboot my ppc chuckchuck?
Hi all,
something strange happened to my XDA (O2 ROM v2.21.4.101):
* my "remove programs" list is now completelly empty, even if I have many programs installed and running!
* I can no longer install any new program ("exe" or "cab") - installation starts, but always ends with unsuccessful message
* active sync 4.2 no longer connects!!
Apart from this, everything seems to be in order.
Any help/hints would be mostly appreciated, trying to avoid an always painfull "hard reset"...
Thanks!
Hm, have you tried updating your ROM? That would reset your phone and update it so it should work...
But you would loose your contacts etc as you cant sync now? Hmmm
keyser said:
Hi all,
something strange happened to my XDA (O2 ROM v2.21.4.101):
* my "remove programs" list is now completelly empty, even if I have many programs installed and running!
* I can no longer install any new program ("exe" or "cab") - installation starts, but always ends with unsuccessful message
* active sync 4.2 no longer connects!!
Apart from this, everything seems to be in order.
Any help/hints would be mostly appreciated, trying to avoid an always painfull "hard reset"...
Thanks!
Click to expand...
Click to collapse
modify the registration:
HKLM\ControlPanel\AdminPassword\Group=0x1(1)
delete the key "Redirect"
Than soft restart. You'll find a "Policy" or "Stratagy" icon in the "System" page of the "Setting" window. Clear the checkbox of restriction.
Thanks for the info - unfortunatelly, I already did an hard reset to the PDA. I will keep it for future reference, though
biolover said:
modify the registration:
HKLM\ControlPanel\AdminPassword\Group=0x1(1)
delete the key "Redirect"
Than soft restart. You'll find a "Policy" or "Stratagy" icon in the "System" page of the "Setting" window. Clear the checkbox of restriction.
Click to expand...
Click to collapse
just for the record that check box was already clear when I looked at it and it didn't do anything for me
Had to do a restore from a back up a couple weeks ago. damn it.
Mine did it after a corrupt install. SOB.
The values basically haven't changed the behavior...
Hi all,
I have copied the values exactly as they were, but still nothing happens...furthermore my ActiveSync on the MDA Vario seems not to recognise any connections, even when the phone is connected with the ActiveSync of the PC. Is there any way maybe to reinstall only the phone portion on ActiveSync in the MDA? I downloaded a file "activesync.exe" from the ftp server. is it the pocketpc portion of activesync?
Thx a lot