Database Users

USB Sync cable driver

Hi all,
Just got myself an 02 Exec and so far am pretty pleased with the device.
I've just bought it in to work with me expecting to be able to sync without issue although I need a driver
My disc is at home, and I really wanna get synced today. I've searched for the driver without success, can anyone grab the required file off their disk for me? would be much appreciated!

HI,
the driver is not all you need, as a WM2K5 device, it will only sync with active sync 4.x. So .. just download AS4 .. and sync ;-)
- Superbowl

You need Active Sync 4.0 not a driver.

Thanks for the replies peeps, however I don't think this is the case.
I have AS 4.0 with me although it's when I first plug in my Exec that it asks me to install this driver.
With AS 4.0 installed it just can;t find my device, the same happened to me at home. I just went into device manager and browsed the offending hardware to the CD where it installed the driver and then AS 4.0 could see my Exec.
Any ideas as to where I can find this driver?

Do you have full admin rights to the PC?
I am on a locked down one where I can't change anything.
Before I got the tech dudes to install AS, the PC kept asking for drivers.
Can't say much more, that's just what happened to me.
I think the message was 'installing windows mobile device...' and then wanting the driver.

Hi mate,
Yeah sure I have full admin rights. I'm really don't think AS4.0 will solve this as like I say the same happened at home until I installed this driver from the applications CD that came with my Exec.
Anymore ideas?

Try it on a different USB port.
I see this happen with a lot of devices. Plug it in one port, Windows doesn't recognize. Plug it to the next one, and it works.

i have to turn me JJ off for 5 secs, then plug into usb and its fine, if i do it when its on i get a malfunctioning usb device pop on my pc

I`m having similare problems....
Full Admin rights
Windows XP SP2
AV4.0 installed
But keep getting "not Connected" whenever I hover over the AV4 icon.
and I have checked that my AV4 on my Exec has "Synchronize all PCs using this connection".
After reinstalling a few times.
Am very stuck....

check this out....
http://www.microsoft.com/windowsmobile/help/activesync/default.mspx

Many many thanks...
Seem like I need to spend a little more time on the MS Windows Mobile site.

Thanks for the help chaps.
Seems AFTER installing AS 4.0 I then went to device manager and clicked the offending hardware after which it installed the driver.
Thanks for the help

WMDC and 8125

I cannot seem to get my 8125 to sync with windows mobile device center in Vista. I have tried both bluetooth and usb cable, and I have turned off Windows Firewall.
When I connected it via the cable, the only thing that installed and appeared my device manager was a Smartphone USB Sync under mobile devices. I have read other people are getting a windows mobile device under portable devices, among other things.
When I try connecting via bluetooth, Activesync just does not show up when I pair my phone and my computer as a service.
Are there drivers I can get from somewhere, or am I doing something wrong? Any help would be greatly appriciated.
Thanks!

You have to update the WMDC in vista inorder to sync. Had the same problem me self.. kinda crazy if u ask me eh...

I know it has been a long time but I have wmdc 6.1 and an 8125 with the most recent HTC cingular rom. How do I get bluetooth sync working? My activesync on my phone says that the service is not installed and I am kind of stuck there.
A ton of google searches have illicited no help. I figurd I would try here...
I am paired properly with the laptop as I am able to use the modem as DUN and get internet working with no problems. I cant seem to get the device center to recognize the phone for syncing my outlook with bluetooth.

Same boat
I am right there with you man. I have tried everything and still no joy. I am going to try and up date my bluetooth software and try it out. I'll let you know if it works for me.

I did it!!
Ok the key is to use the same Comm port in WMDC that the wizard uses. For example try to set up a bluetooth partnership with your PC via your wizard. When you see a popup on your desktop that you wizard is trying to connect make a not on which Comm port it is trying to use. (for me it was COM4.) from there go into your setting in WMDC and check the second box to allow the wizard to use differant ports. Select your port and click ok. You should be good to go. Let me know if that did or didn't work for you. Best of luck!

xv6800 cannot sync via bluetooth

Hey all, sorry for the remedial questions, but I am pulling my hair out trying to get my phone connected to my laptop thru ActiveSync via Bluetooth. I have the verizon xv6800, running dcd 2.3.2, activesync 4.5 and windows XP.
Anyone have a noob step by step? I have read the phone docs and the activesync docs and I cannot get it. My ports are matching and I can "connect" to the laptop, meaning my pc sees it as a bluetooth device and vice versa.. but not transfer anything or connect via activesync.
Thanks.

bump
anyone help out?

I am too having the same problem. I had given up but if someone would be willing to help that would be wonderful.

ive never been able to get bluetooth activesync to work on XP but it works flawlessly on vista.

Zenoran said:
ive never been able to get bluetooth activesync to work on XP but it works flawlessly on vista.
Click to expand...
Click to collapse
Well thats helpful!

How did you set it up for Vista? I can't get it to show up for nothing.
Chris

Hermes unable to sync and run out of idea

I know this may sounds like the usual not unchecking the advanced network tick box but I promise I've tried everything to get my hermes to sync and it won't
situation is I've upgraded to a 6.1 ROM and WMDC (Vista Ultimate 32) says connecting (the device is installed on first connection) and then as it gets to the point where it would normally ask you to set up the partnership, it goes back to not connected. The phone has the two arrows still there like it is connected.
I've ruled out most things and have been trawling around the forums but I've just reached a dead end.
I don't think it's the USB as it does the same thing with bluetooth.
I don't think it's the computer because I recently changed my machine (same OS though)
I don't think it's the phone because it's actually a replacement after my screen broke on my original
I even don't think it's the ROM because no one else has this trouble in the thread ([20755] [OPTIMIZED Manilla2d IS HERE!][09/29](AlmostNak3d)(V8))
I've also tried uninstalling WMDC as much as is possbile on Vista and I've tried disabling the windows firewall
It's so frustrating, as I seem to have 6.0 working no probs but that ROM is just so good I have to have it (but with some contacts would be best)
The only thing that I can think of is that I flash the ROMS through an XP machine. This can't be causing the issue can it?
Any help gratefully received. I determined that this phone stays with me until the HD comes out and it really doesn't have long to go now

no one have any suggestions
(or did i post this in the wrong forum)?

Have you tried deleting all partnerships on the phone and computer and then tried to sync it. I have the same rom as you and device and i have problems only when i try to sync via bluetooth. Check the com port for the bluetooth is not conflicting with the WMDC. You could even try disabling the bluetooth comport and see if that makes a difference
If it syncs with an xp machine, why dont you try, exporting the contacts as comma seperated values(windows) and then import them on to the xp machine, at least that way you will have your contacts on the phone.
Also why do you flash with the xp machine and not vista, have you installed all updates in vista?

thanks for the reply SM. Sorry for the delay in my response but I've been sunning in the maldives! I got things going before leaving (so i had some contacts) by doing pretty similar to what you suggested. I sync the xp machine with the vista machine and then sync the phone with the xp machine. I've tried deleting the partnerships on both sides (i've even tried reinstalling vista) but I'll give the removing of the bt com ports a go i think.
my flashing from xp was just a historic thing. i think there may have been an issue with vista once as i was staying away from it for some reason but after my previous post i actually think i did then flash from vista

Upgrade with vista?
Upgrade with vista? its posible I think it has issues...
I can recomend to you...
1.- download again the usb drivers for your Motherboard on XP machine...
2.- Even if you have Windows Vista you can aquire a XP emulator for Win vista and do these things.
3.- If you dont ant to install again the drivers for USB ports so....
restart your PC and your PPC witout unplug your PPC let it boots togheter... it fix my trouble with the same ROM you have...

No sync possible

Hello!
My father lended his MDA Pro aka HTC Universal to me. Its running on WM5, my PC on XP SP3 and I have issues with synchronization via USB-Cable. Active Sync 4.5 tries to connect to it but it always fails. I have no idea what to do now. Soft-reset didn't bring a change and google neither
Hope you can help me!
greetings
S-Mon

S-Mon696 said:
Hello!
My father lended his MDA Pro aka HTC Universal to me. Its running on WM5, my PC on XP SP3 and I have issues with synchronization via USB-Cable. Active Sync 4.5 tries to connect to it but it always fails. I have no idea what to do now. Soft-reset didn't bring a change and google neither
Hope you can help me!
greetings
S-Mon
Click to expand...
Click to collapse
Welcome to the forum
nex tiem use the search before creating a new thread
http://forum.xda-developers.com/showthread.php?t=373298&highlight=sync+problems
Good luck,