they say to enter the bootloader from the mda2 you must press power and the cursor/joystick key and put the pen in the hol
you do get into the bootloader but after you finish you also got your entire rom resetted and everytghing is factory default !
I have downloade LokiWiz and loaded the correct file to the phone, after i click on the MS DOS prompt i hit U to unlock and a quick text appears and the box closes. Is there anyother way to unlock the phone or shall i call t-mobile to get the unlock code?
I am using lokiwiz unlocking software and procedure on my Cingular 8125 with 2.25 firmware. The problem is that my unlock code is "SIMLock Code" but when I try to enter that into my phone when prompted for an unlock code, the provided space isn't large enough. All I can enter is "SIMLock ". What am I doing wrong?
what you wanted was the numbers after the line "SIMLock Code: ##########"
To unlock the 8125, do I need a cingular sim card to run the lokiwiz unlocker and get the unlock code? I bought a brand new phone but I don't have a cingular sim card. Help!
I believe so. You should be able to find a pal with a Cingular (AT&T will also work) SIM, though. Short of that, they do sell pay-as-you-go SIMs.
Thanks! I'll start asking around.
Nopes ! you don't require any particular SIM to get your phone SIM unlocked.lokiwiz will automatically SIM unlock the phone,regardless of any SIM in it.Thats why,after SIM unlock you can insert any SIM of any network .
In Windows XP you can simply start ur phone without a sim and when it says insert one use the stylus to hit the start button then choose the today screen and when activesync asks for a connection cancel it to be a guest.
the first thing you have to do is downgrade to the button rom for ipl and spl 1.05 which is required to unlock the phone at all.
before downgrading you should hard reset your phone to make sure the flash takes effect properly.
to perform a hard reset you hold the com manager button and the voice button both on the top of each side and right below the ir sensor is the reset button which u will hit with the stylus as you hold both buttons then while still holding the buttons the screen will go black and ask you to hit send to reset.
then after flashing to the button rom open the explorer and copy over the enablerapi.cab to a folder u can find it on the phone. then find the file and open it to install.
now u want to extract the lokiwiz to ur c: drive for easy use then u go to the pc with a connection to activesync as a guest and open up ur dos command prompt.
type cd\ then hit enter then type lokiwiz and hit enter. you firt hit u and enter for sim unlock then when ur phone restarts get a guest connection and type lokiwiz in command promt then type c and hit enter after this your phone should be fully unlocked.
also you have to install wm5 before moving to wm6 otherwise your ipl and spl will not update and problems will ensue. the best way i find is to flash down to button rom then upgrade to tmobile 2.26 rom which is very stable and from there i end up with farias the real thing wm6 rom or tnt 1437 wm6 rom as its stable and runs smooth. this is all up to you and what you need to do with your phone based on what rom you run. most of everything you will need is in the unlocking guide.
http://forum.xda-developers.com/showthread.php?t=285435
if you get stuck in boot loader for any reason u can flash from there without any problem as long as your in windows xp. also if you get a flash screen that wont load into windows and it keeps restarting hit reset under the ir with ur stylus then hold the camera button to re enter boot loader. from there you can reload a rom you know works such as the button rom
WOW ! LOL
Simply read the 'freakin' guide at :-
http://forum.xda-developers.com/showthread.php?t=285435
or
http://wiki.xda-developers.com/index.php?pagename=Wizard Windows Mobile 6 for newbies
Have a nice day !
Thanks! I now have a working cingular 8125 on the Cincinnati Bell Wireless system.
any idea for it ?
i do all steps but when i try to press sim lock code i cant enter any number in phone
WIZA 200
1.06
1.06
01.12.10
os 1.6.2.1
i show Sim Lock space in phone but cant type any number just beep when i press number