Database Users

8020 qtek

this device is locked. enter your device password and press the unlock softkey.
what will htis phone? and hou can i unlock this phone

Unlocking Cingular 8125, provided space isn't large enough for unlock code

I am using lokiwiz unlocking software and procedure on my Cingular 8125 with 2.25 firmware. The problem is that my unlock code is "SIMLock Code" but when I try to enter that into my phone when prompted for an unlock code, the provided space isn't large enough. All I can enter is "SIMLock ". What am I doing wrong?

what you wanted was the numbers after the line "SIMLock Code: ##########"

3300 dont start anymore

ive got a htp 3300 from movistar spain and i allready got it unlocked, yesterday i put the wm6 english on it and today y tried to put
PDAMobiz_Dopod_P800W_AKU301_v1.1.2_PowerMap, now
i can see only the white htc screen
IPL 3.007.001
SPL 3.07.0000
GSM 02.69.90
OS 1.28.0.0
the phone dont start anymore
y need helpe please

Can you get in to the bootloader?
If you do then you can put an original rom back. If you don't then send it to the service.
An unlocked device is out of warranty so be prepared to pay for the service.
Go to wiki of Artemis there you can find the method to get in to the bootloader.
Goof luck! << you need that.

you meen push the record button and reset in the same time???
i tried this befor but never go in bootloader modus maybe i make something wrong pleas help me

As of this http://forum.xda-developers.com/showthread.php?t=308242#1 threath of meschle states your device is a brik.
I'm sorry to tell you that.
meschle said:
Do Not flash your Artemis with a different carrier/cooked Rom without cid unlocking
--------------------------------------------------------------------------------
Noobs beware!
As a number have been flashing their devices with various roms not from their own carrier or country or cooked roms and bricking their device - I put up this sticky. Your device must be cid unlocked first before you do this. This applies to the coming wm6 roms to - if the rom is not specific to your device - i.e. if you try to flash the upcoming htc 3300 wm6 rom on O2 orbit - you must cid unlock first - with imei check or you will end up with a BRICK!
This does not apply if you are only updating the os http://forum.xda-developers.com/showthread.php?t=299154 or radio.
cid = country id i.e. locked to that country/language/vendor
cid unlock for the artemis is here with USPL http://forum.xda-developers.com/showthread.php?t=311403 (thanks pof)
or here http://www.imei-check.com/c3unlock.php (costs though)
Bricked devices
If you have flashed your device and not cid unlocked it, your device maybe salvagable if you can get it into bootloader mode.
Hold down the voice speed dial button and soft reset - you should then enter bootloader mode 'multicolored' screen'
If you do, attach device to pc via usb cable (a small usb will appear bottom left of screen) and flash factory rom. (run rom executable or RUU updater from pc) You do not need to be activesynced to do this.
HTC P3300 WWE factory rom downloadable here http://rapidshare.com/files/19322112...0_WWE_SHIP.rar
Dopod P800 WWE factory rom downloadable here http://rapidshare.com/files/21058219...0_WWE_SHIP.rar
O2 Orbit WM5 WWE factory rom downloadable here http://rapidshare.com/files/41574866/Arteimg.nbh
O2 Orbit WM6 WWE factory rom downloadable here http://rapidshare.com/files/46377862....90_Shi p.exe
Before you flash again with a non-factory rom, your device MUST be cid unlocked.
If you cannot enter bootloader mode your bootloader has been damaged and your device will need to be sent away for repair.
Click to expand...
Click to collapse

movilstore said:
ive got a htp 3300 from movistar spain and i allready got it unlocked, yesterday i put the wm6 english on it and today y tried to put
PDAMobiz_Dopod_P800W_AKU301_v1.1.2_PowerMap, now
i can see only the white htc screen
IPL 3.007.001
SPL 3.07.0000
GSM 02.69.90
OS 1.28.0.0
the phone dont start anymore
y need helpe please
Click to expand...
Click to collapse
i had the same problem and took me 3 days to fix it. so maybe this will work for you too !
first take out the battery for 30 min then push the reset button and put the battery back and turn on the device. if this not working. try to start bootloader by pressing and holding the record button and on/off button and push the reset butoon in the same time but keep pressing the record button and on/off button till a colored screen shows up??? sometimes it doesn't appear at the first time so just keep trying .
if you have bootloader you can reflash a rom. but you need to format your memorystick first to fat on your pc then put the image rom (nbh file) and rename it to Arteimg.nbh !! i used OrbitO2UK image.

Cingular 8125 unlock question

To unlock the 8125, do I need a cingular sim card to run the lokiwiz unlocker and get the unlock code? I bought a brand new phone but I don't have a cingular sim card. Help!

I believe so. You should be able to find a pal with a Cingular (AT&T will also work) SIM, though. Short of that, they do sell pay-as-you-go SIMs.

Thanks! I'll start asking around.

Nopes ! you don't require any particular SIM to get your phone SIM unlocked.lokiwiz will automatically SIM unlock the phone,regardless of any SIM in it.Thats why,after SIM unlock you can insert any SIM of any network .

In Windows XP you can simply start ur phone without a sim and when it says insert one use the stylus to hit the start button then choose the today screen and when activesync asks for a connection cancel it to be a guest.
the first thing you have to do is downgrade to the button rom for ipl and spl 1.05 which is required to unlock the phone at all.
before downgrading you should hard reset your phone to make sure the flash takes effect properly.
to perform a hard reset you hold the com manager button and the voice button both on the top of each side and right below the ir sensor is the reset button which u will hit with the stylus as you hold both buttons then while still holding the buttons the screen will go black and ask you to hit send to reset.
then after flashing to the button rom open the explorer and copy over the enablerapi.cab to a folder u can find it on the phone. then find the file and open it to install.
now u want to extract the lokiwiz to ur c: drive for easy use then u go to the pc with a connection to activesync as a guest and open up ur dos command prompt.
type cd\ then hit enter then type lokiwiz and hit enter. you firt hit u and enter for sim unlock then when ur phone restarts get a guest connection and type lokiwiz in command promt then type c and hit enter after this your phone should be fully unlocked.
also you have to install wm5 before moving to wm6 otherwise your ipl and spl will not update and problems will ensue. the best way i find is to flash down to button rom then upgrade to tmobile 2.26 rom which is very stable and from there i end up with farias the real thing wm6 rom or tnt 1437 wm6 rom as its stable and runs smooth. this is all up to you and what you need to do with your phone based on what rom you run. most of everything you will need is in the unlocking guide.
http://forum.xda-developers.com/showthread.php?t=285435

if you get stuck in boot loader for any reason u can flash from there without any problem as long as your in windows xp. also if you get a flash screen that wont load into windows and it keeps restarting hit reset under the ir with ur stylus then hold the camera button to re enter boot loader. from there you can reload a rom you know works such as the button rom

WOW ! LOL
Simply read the 'freakin' guide at :-
http://forum.xda-developers.com/showthread.php?t=285435
or
http://wiki.xda-developers.com/index.php?pagename=Wizard Windows Mobile 6 for newbies
Have a nice day !

Thanks! I now have a working cingular 8125 on the Cincinnati Bell Wireless system.

[Q] x10i emergency call only

pls how do I go about this? my client came with the unlock code just for me to enter it, but the phone is just showing "emergency call" no place to enter code. I guess it need HARD RESET, if yes, HOW?

I think you're suppose to insert a SIM card from a different carrier first for the unlocking code field to show up. I remember if you didn't put any SIM card into the phone, it'll just show the Emergency Call only screen. If you put in your SIM card, a box asking for the unlocking code will show up. I hope this helps.