they say to enter the bootloader from the mda2 you must press power and the cursor/joystick key and put the pen in the hol
you do get into the bootloader but after you finish you also got your entire rom resetted and everytghing is factory default !
Related
can anyone tell me how to put my dopod m700 on bootloader mode
shaan_x said:
can anyone tell me how to put my dopod m700 on bootloader mode
Click to expand...
Click to collapse
if i remember correctly. Hold down the powerbutton and camera button and press the soft reset button with ur pen.
Its a bit tricky but thats what i did.
Hope this helps.
i did as u told me but it doesnt work
are u sure its the way to put Dopod M700 on bootloader mode
I know the other guys in the other forum said your device is not an Artemis, but I beleive it is in fact. Hard reset by holding down both soft keys, then pressing power button, whilst keeping the soft keys pressed. Then press SEND when prompted.
Tris
ya i can hardreset now by the way u just said thanks tris
but i need to put my device on bootloader mode can u help me on this problem
I have a big problem with my mda vario.
the begenning: !. i done a hardreset and before finishing a softreset.
now my ppc doesnt boot anymore. the hung up is by the screen of t-mobile.
Plese help me!
What can i do now, is my mda vario over?
No resets bring me forward
Touchscreen or any other buttons doesnt react and doesnt work anymore.
The only thing that i can do is to remove the battery
Stupid question, but why would you do a soft reset in the middle of a hard reset?
Anyway, probably your best bet would be to download the latest t-mobile rom, put your phone in bootloader mode and flash the rom again. This time, avoid doing a soft reset in the middle of it.
how do i install the rom in the ppc if it doesnt boot.
can you give me a todo list, please ?
how can i put my phone in bootloader mode
Press and hold the camera key and then press the on button. When multicolored bootloader screen comes up release the camera button and then you're ready to flash.
Ok got my phone doing some funky stuff...
Before I turned off the phone, the phone was default, with extra programs that is all. Basically i was doing my thing, then the phone kept trying to record a new sound file, in the notes section.
I turned off the phone and back on, now the phone starts in the bootloader, 3 color screen.
I can successfully patch ROM files to the phone, but I can't get past the bootloader. I have pulled all the casing off the phone, just to see if anything was holding the buttons in, but no such luck either.
IPL 2.20
SPL 2.20
Loaded on some of your rom's cause it's about time i did this.
I can hold the camera key, and get to the reset factory default, but when i press the green key nothing happens. Anyone got any idea's what is going on
fixed with a hard reset
how to hard reset this model ?
com button, power on +camera ;keep them
how to do this ??? and what - where is the Com button
how to do this ??? and what - where is the Com button ?
what is ???
please reply to this email [email protected]
spv m650 how to enter bootloader manualy? what keyboard combinaton? phone is freezed with htc logo, sync dont see it
i try it green dial key and soft reset button(with a niddle i push it) and nothing happent (
i tryed hard reset maybe this will help? i undersatand i have to [ush both soft reset keys and reset button, but wich ones are soft reset keys on spv 650??
i tryed to enter boot loader by pressing POWER+Dial green key+reset button, release reset button and phone starts again and freeze with htc logo and ipls/ispl/os informations , and no bootlader mode
Help, help!!!!
Certainly when upgrade from WM03 to WM06, we all must go to the boot loader option to clean registry, disable KITL, clean storage...etc . However,poor me, I have an XDAII with broken record and camera button, so that I can not get in Boot Loader ( Press ResetButton and hold down CameraButton + RecordButton )
So could any one solve this problem?
many thank!!!!
when i upgrade my i-mate into xda 2 i'm not pressing any button to get boot loader screen, why?
coz i'm new in pocket pc phone n dont have any experience about flashing pocket pc phone, i usually flashing cdma phone (not ppc, just mobile phone)
i'm from indonesia, i bought i-mate from stupid person with IDR250.000 (around USD$25) lol
but too bad, he's selling i-mate with arabic letter, i dont understand arabic, n another problem, that phone didnt soft reset when i press soft reset button
here's my 1st experience to upgrade arabic i-mate (1.66.00WWE) into o2 xda-2 (1.72.00WWE)
i downloaded radio.nbf file from this ftp n flashing with himaupgradeut_noID, when complete n phone got reset, u'll get bootloader screen, u can update your pocket pc with any firmware u want
Thanks
Arimbi
Arimbi said:
when i upgrade my i-mate into xda 2 i'm not pressing any button to get boot loader screen, why?
coz i'm new in pocket pc phone n dont have any experience about flashing pocket pc phone, i usually flashing cdma phone (not ppc, just mobile phone)
i'm from indonesia, i bought i-mate from stupid person with IDR250.000 (around USD$25) lol
but too bad, he's selling i-mate with arabic letter, i dont understand arabic, n another problem, that phone didnt soft reset when i press soft reset button
here's my 1st experience to upgrade arabic i-mate (1.66.00WWE) into o2 xda-2 (1.72.00WWE)
i downloaded radio.nbf file from this ftp n flashing with himaupgradeut_noID, when complete n phone got reset, u'll get bootloader screen, u can update your pocket pc with any firmware u want
Thanks
Arimbi
Click to expand...
Click to collapse
yes, its because you'r flashing Radio only, if you are flashing WM5/WM6/WM6.1/WM6.5 you need to enter bootloader mode!
Me to have only record button not working
But i made it,open your phone open whole parts,now attach your battery with a rubber ring so phone can start,notice that white part which is situated near the camera which has four pines fix it with screw or until your phone boots, you need four hands either to enter in boot loader mode or hard reset.you should connect the circuit button with a metal/wire,first try that button you will see camera or record working apply same for your needs. out of that four points of button adjust three to connect toughether to activate.