somebody please help me... i flashed to wm2005 recently and tried using it..well, i can't get it to sync via USB activesync 4.0...
i've tried all advices from these posts, but still, i can't get them to work... i've tried the following:
1.)detect and repair outlook
2.)uninstall and reinstall active sync 4.0, and connected to other ucb ports
3.)downloaded and installed the netrndis.inf, rndismpx.sys and usb8023x.sys files
4.)downloaded activesync 4.0 from the microsoft website...
you wizards out there, please help me.. i'd really love to use wm5.0, but if i can't use active sync, it's useless...
Go to the ftp site, the himalaya wm2k5 folder contains two activesync files. Download the most recent one and re-install on your pc.
If you have further issues go to the wiki pages. Link is posted on the news section.
Please use Activesync 3.8 instead
I believe microsoft site itself recommends 3.8. It works well for me.
Hope that helps.
-anstorm
Installation
where can i get rndismpx.sys installaton file?
Related
Hello all,
I have bought qtek S200 recently and i have spent a lot of man hours trying to get this thing to sync with my desktop computer. it works fine with my laptop however doesn't want to sync with my desktop.
I get an new hardware wizard when i plug my pda into the USB requests for me to point to the drivers because windows was unable to find drivers.. I have gone through troubleshooting steps where disabling firewall / ant virus. Uninstalling active sync reinstalling / downgrading active sync and upgrading no luck. doesn’t matter if i try 3.8 or 4.2 it doesn't want to recognize my device and asks for the drivers.
i have windows xp with service pack 2 installed. so at this point i am wondering if someone has the driver files for it ? or what should be next step, any help would be appreciated.
Don't even try with activesync 3.8. It doesn't support WM5. Use 4.1 or 4.2...
Can't help beyond that...
I tought I had tried everything as well, when I found this utility over at Modaco (apparently included in the latest Dopod ROM).
Install and switch from RNDIS to Serial using the program and voila - worked like a charm for me!
Hope it helps!
After fighting with this device and my system for about 2 weeks. i noticed that my system had become so unstable that it wont' accept any new hardware. I tried installing a new 3COM network card and mostly 3com NIC's dont' require drivers however my system poped a window stating can't find drivers and put the device in system not working properly status.
so then i decided to format my computer and after the format, installed service pack 2 for xp and tried ACTIVE SYNC. without a problem it worked fine.
Hello guys i have a magician with windows mobile 2003, ROM version 1.12.00 WWE, actually downloaded from magician wiki,
my problem is as the title suggests, i can't synchronise using bluetooth, things are fine wth USB, but not with bluetooth.
i have been searching the forum for a week now, and followed many steps, but no use...when i start Active Sync on the PPC and i press connect via bluetooth i get stuck in "connecting to host" and it doesnt change.
i have an ASUS notebook (XP SP2)with Build in Bluetooth, and use ActiveSync 4.5.
2 more notes:
1. i had vista on the notebook a week ago, and things were totally fine, bu as i am back to XP, and to ActiveSync 4.5, things don't work, it never worked even with the previous XP.
2. i am not good in these things,,,so please a bit more detalied comment will be very helpful
thanks in advance
regards
can we debug it?
Hello guys:
to make things easier...
can one of you guys provide me with the steps that he thinks work fine, and then i can execute these steps...and debug the problem togehter...
thank you for your help
no hope for help??
First of all i really want to thank all the Helmi_c and all the developers; My BA is most updated running wm6.
Well much better than wm5 but I have some issues:
1. cant sync it with my PC in anyways (BT, usb etc), USB drivers are not working correctly.
2. sometimes when i pick or dial a call, i cant hear nething.
and last but not relevant to this, guys how do i stop my BA slider from falling down when I use keyboard.
1. Try delete the actual partnership in AS, sync again; if not reinstall AS on PC
2. No problem here with the sound.
same problem here
I upgraded my XDA2s, customized it,backedup, then upgraded my brothers XDA2s and used my customized backup on his XDA2s.
Now my XDA connects fine, but his doesn't !!!
Both our XDa2s's are identical in everyway.
tried a hard reset and restore from another backup and still no luck!
we were trying to save time re-installing the same softwares.
tried deleting partnerships, no luck. tried spb backup and clone, no luck.
any ideas!
Do you get any error messages on AS? Can you browse the internet from device?
usb drivers
can anybody post usb drivers i think this is the problem cause my device isnt installed properly it says problem with inf file.
whoever is able to connect his device to xp desktop via active sync usb connection, please copy the drivers folder contents from program files in active sync folder.
thanks, hope this works
Is your windows firewall enabled? Since WM6 activesync makes use of a LAN connection to sync with the PC, you must allow activesync trough the windows XP firewall, or disable the windows XP firewall completely...
no sound problems with me...
did you try to install WM6_SoundFix_.cab ?
A-
hi all guru here,
Do you know how to get the HTC Dual Touch connect with linux and sync?
other than wine, im not sure
apparently, activesync 4.1 works under ubuntu and wine.
http://appdb.winehq.org/objectManager.php?sClass=version&iId=3774
i've downloaded the ActiveSync 4.3.. i think.. but it's in .CAB format... wine can't recognize it and install.. :'(
I tried with ActiveSync 4.5 which is a .msi file (MS installer),wine supports it with "wine msiexec /i filename.msi". It installed well but when I try to use it wine reports "Unsupported socket family".
I didn't waste too much time on it...if someone had better luck please share
ZhenMing said:
i've downloaded the ActiveSync 4.3.. i think.. but it's in .CAB format... wine can't recognize it and install.. :'(
Click to expand...
Click to collapse
tripledes said:
I tried with ActiveSync 4.5 which is a .msi file (MS installer),wine supports it with "wine msiexec /i filename.msi". It installed well but when I try to use it wine reports "Unsupported socket family".
I didn't waste too much time on it...if someone had better luck please share
Click to expand...
Click to collapse
I've installed the v4.5 to the system through the command you recoommand... but when launch the active sync, it says no USB port found when want to sync...
How to make the USB port through WINE?
Maybe you should check this out: http://www.guidodiepen.nl/2008/03/24/major-update-of-synce-kpm-now-even-better-than-before/
Succes, and please tell us if it works and how you got it to work (if you did ofcourse)
fritsypeij said:
Maybe you should check this out: http://www.guidodiepen.nl/2008/03/24/major-update-of-synce-kpm-now-even-better-than-before/
Succes, and please tell us if it works and how you got it to work (if you did ofcourse)
Click to expand...
Click to collapse
Hi, the above links to a project I have been working on (SynCE-KPM). I just want to clarify a bit about it:
* SynCE-KPM is builds upon some components of the SynCE project, you will need that to be installed before you can actually use SynCE-KPM (see www.synce.org for instructions. )
* SynCE-KPM does NOT do the actual syncing. Syncing of the PIM data on the phone can be done to any PIM application supported by the OpenSync project (Currently basically Evolution and Kontact, though there is a google plugin also IIRC).
If you want to install the SynCE on your computer, make sure that you follow the guides that are provided on www.synce.org because a lot of the guides found on the net are either a bit outdated and contain errors or are oriented to the WM2003 devices, which require a completely different way of connecting.
Guido Diepen
I'm currently sinking using this method
Any suggestions on a good program to manage
PIM
contacts
calendar
email?
I'd say stick to Evolution for PIM data, and use the opensync frame work to sync. All info and a good how to can be found at synce.org. Just follow the setup for ubuntu.
I've been syncing flawlessly for the past year.
Hi. Help me please! I have got x1 but i haven't got a cd. But i want to update my rom, but it is working on Active sync. The problem : my combuter doesn't know the devce, so i can't update my rom and i can't upload Wm 6.5 Please help me. Thanks
use another combuter
switch x1 in drive mode
There is absolutely no need for the original CD, i have one but i have never put in the the computer, i don't know even what's on it
I use my X1 with 2 computers, a Vista and an XP Pro, both recognized the x1 with no special drivers, activesync ok.
to update the ROM, check the X1 ROM forum here, there is a method without PC (the MicroSD method), which i use and is very fast and easy.
Does anyone know whether there are any prog that allow usb host on the xperia? I want to plug my hard drive into it w/o using a computer
It doesn't exist simply becuase xperia doesn't has the hardware to be a usb host.
so
So, thank you for all, but my problem is still. So, I've got windows xp and x1, the usb driver connect is very godd, it is working, but if i choose the Active sync the xp doesn't know the device. I don't know why. Should i have a driver or another program ? I want to update my rom and Wm 6.5. Please help
install xp sp3
remove option something about "advanced network capabilities"
install active sync
then (re)install outlook (2007)
Ethermind said:
install xp sp3
remove option something about "advanced network capabilities"
install active sync
then (re)install outlook (2007)
Click to expand...
Click to collapse
THANK YOU VERY MUCH
The problem was the active sync, I insalled it
glad to know this